Sebastian,
Will push the patch today for the second issue today. Was on Diwali
holidays .. :)
Cherrs,,
Pavitra
On Thu, Oct 23, 2014 at 3:48 PM, Sebastian Andrzej Siewior
wrote:
> On 10/22/2014 04:03 PM, Pavitrakumar Managutte wrote:
>> Fixed the return value on failure. status variable
>> is
logical mask has lower precedence than shift but should be
done before the shift so parentheses are generally required.
And when masking with a fixed value after a shift, normal kernel
style has the shift on the left, then the shift on the right so
convert a few non-conforming uses.
Joe Perches (
Precedence of & and >> is not the same and is not left to right.
shift has higher precedence and should be done after the mask.
Add parentheses around the mask.
Signed-off-by: Joe Perches
---
drivers/usb/host/hwa-hc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/u
On Fri, Oct 24, 2014 at 10:35:29AM -0600, Bjorn Helgaas wrote:
> On Fri, Oct 17, 2014 at 04:53:27PM +0800, Huang Rui wrote:
> > The dwc3 controller is the PCI-E device in AMD NL platform, but the class
> > code
> > of PCI header is 0x0c0330, the same with xHC. That's because it needs to
> > meet
On Fri, Oct 24, 2014 at 07:45:05PM +0900, Yoshihiro Shimoda wrote:
>Here's the set of 3 patches against Simon Horman's 'renesas.git' repo,
> 'renesas-devel-20141024-v3.18-rc1' tag. Here we add the HS-USB device tree
> support on the R8A7791/Koelsch/Henninger reference boards. The patchset
> req
On Fri, Oct 24, 2014 at 07:44:32PM +0900, Yoshihiro Shimoda wrote:
> Here's the set of 2 patches against Simon Horman's 'renesas.git' repo,
> 'renesas-devel-20141024-v3.18-rc1' tag. Here we add the HS-USB device tree
> support on the R8A7790/Lager reference board. The patchset requires the USB
> P
On Fri, Oct 24, 2014 at 07:43:01PM +0900, Yoshihiro Shimoda wrote:
> This patch is based on Simon's renesas.git branch and
> renesas-devel-20141024-v3.18-rc1 tag.
> Since koelsch and henninger doesn't have a USB3.0 connector,
> I submit a patch for r8a7791.dtsi only.
Thanks, I have queued this up
On Fri, Oct 24, 2014 at 07:41:45PM +0900, Yoshihiro Shimoda wrote:
> This series is based on Simon's renesas.git branch and
> renesas-devel-20141024-v3.18-rc1 tag. If we use the generic phy
> driver for R-Car Gen2 (drivers/phy/phy-rcar-gen2.c), we can use
> the USB3.0 on lager.
Thanks, I have que
On Tue, Sep 16, 2014 at 09:26:35PM -0500, Felipe Balbi wrote:
> Hi,
>
> On Wed, Sep 17, 2014 at 09:13:53AM +0800, Peter Chen wrote:
> > Hi Felipe,
> >
> > In this series, I convert udc driver to use udc-core's reset notifier
> > which has added recently, I only change the drivers which has
> > bu
Hi Felipe,
I'm noticing some strange behaviour in the gadgetfs driver when running
gadgetfs-test; the program fails with the error "ep0 read after poll: Invalid
argument".
As far as I understand, an inode is created upon an open() call in
gadgetfs-test and
an initial fops is assigned to the str
USB gadget driver dbgp can be used as an EHCI debug dongle in replacement
for product like Net20DC. With it one can receive early kernel messages
from remote targets over USB. See parameter earlyprintk=dbgp for target
kernel requirements and configuration.
The two patches are required for dbgp ga
SET_FEATURE request for DEBUG_MODE only worked the first time after module
initialisation. On USB host reset or cable disconnect gserial_disconnect()
clears the associations dbgp.serial->in->desc and dbgp_serial->out->desc.
Per the USB 2.0 debug device specification, SET_FEATURE with DEBUG_MODE
is
There are applications where it is desirable to not hangup ttyGS* when
USB disconnect is detected. USB host side of communication may
power-cycle periodically or there may be the actual need to physically
disconnect and reconnect USB cable temporarily.
USB disconnects on serial gadget are comparab
Robert Jarzmik writes:
> These are the remaining patches from the initial serie.
Ping ?
Cheers.
--
Robert
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info
From: Torsten Fleischer
The call of 'kfree(ci->hw_bank.regmap)' in ci_hdrc_remove() sometimes causes
a kernel oops when removing the ci_hdrc module.
Since there is no separate memory allocated for the ci->hw_bank.regmap array,
there is no need to free it.
Cc: v3.14+
Signed-off-by: Torsten Flei
Hi Greg,
It is a great bug-fix, it fixed the chipidea loadable module issue from
v3.14, thanks Torsten's patch.
Torsten Fleischer (1):
usb: chipidea: Fix oops when removing the ci_hdrc module
drivers/usb/chipidea/core.c |1 -
1 file changed, 1 deletion(-)
--
1.7.9.5
--
To unsubscribe
Had some progresses:
on kernel 3.17, musb controller driver is set to start as OTG mode as
default. So as first thing, since my board has ID pin shorted to ground,
i changed the default mode to MUSB_HOST., as it was on kernel 3.5.1
So with same settings of 3.5.1 now key is detected correctly
17 matches
Mail list logo
