Hi Felipe,
On Wed, Jul 2, 2014 at 10:16 PM, Felipe Balbi wrote:
> Hi,
>
> On Sun, May 25, 2014 at 11:10:30PM +0530, sundeep subbaraya wrote:
>> Hi Felipe,
>>
>> Please take a look at below about how this IP works:
>>
>> IN:
>> req.buf ---> DMA (transfers from ddr to IP buffer, raise DMA
>>
Hi,
On Fri, Jul 4, 2014 at 10:10 PM, Mark Rutland wrote:
> On Tue, Jun 24, 2014 at 07:44:10AM +0100, sundeep subbaraya wrote:
>> Ping
>>
>> Thanks,
>> Sundeep.B.S.
>>
>> On Tue, Jun 10, 2014 at 5:34 PM,
>> wrote:
>> > From: Subbaraya Sundeep Bhatta
>> >
>> > Add devicetree bindings for Xilinx
Hi,
On Sat, Jul 5, 2014 at 4:56 AM, Sergei Shtylyov
wrote:
> Hello.
>
>
> On 06/25/2014 02:32 PM, Vivek Gautam wrote:
>
>>> From Sergei Shtylyov
>
>
>>> Add the generic PHY support, analogous to the USB PHY support. Intended
>>> it to be
>>> used with the PCI EHCI/OHCI drivers and the xHCI pla
Hi, Marek
2014년 07월 04일 21:13, Marek Szyprowski 쓴 글:
> This patch adds support for Exynos3250 SoC to Exynos2USB PHY driver.
> Although Exynos3250 has only one device phy interface, the register
> layout and all operations that are required to get it enabled are almost
> same as on Exynos4x12. The
On 07/06/2014 11:01 PM, Greg KH wrote:
On Sun, Jul 06, 2014 at 07:52:41PM +0200, Michael Grzeschik wrote:
Hi,
On Sun, Jul 06, 2014 at 09:26:02PM +0500, Abbas Raza wrote:
From: Abbas Raza
There are 2 methods for ZLP (zero-length packet) generation:
1) In software
2) Automatic generation by de
On 07/06/2014 03:38 PM, Peter Chen wrote:
On Fri, Jul 04, 2014 at 05:40:59PM +0500, Abbas Raza wrote:
From: Abbas Raza
When gadget driver is inserted and OTG is in host mode, interrupts
occur which are not handled by chipidea driver causing following
problem. To avoid this problem, don't allow
Following the name change of the NOP transceiver driver in commit
4525bee (usb: phy: rename usb_nop_xceiv to usb_phy_generic), the
transceiver driver was no longer operable under its old name.
Register the transceiver driver before calling usb_get_phy() to make
sure we are noticed by an error mess
Hello,
The name of the NOP transceiver driver was changed during v3.16
release cycle from usb_phy_gen_xceiv to usb_phy_generic.
The patch that comes as a follow up of this message registers the NOP
transceiver driver before calling usb_get_phy() to avoid issues
related to accessing its data struc
On Sun, Jul 06, 2014 at 07:52:41PM +0200, Michael Grzeschik wrote:
> Hi,
>
> On Sun, Jul 06, 2014 at 09:26:02PM +0500, Abbas Raza wrote:
> > From: Abbas Raza
> >
> > There are 2 methods for ZLP (zero-length packet) generation:
> > 1) In software
> > 2) Automatic generation by device controller
>
Hi,
On Sun, Jul 06, 2014 at 09:26:02PM +0500, Abbas Raza wrote:
> From: Abbas Raza
>
> There are 2 methods for ZLP (zero-length packet) generation:
> 1) In software
> 2) Automatic generation by device controller
>
> 1) is implemented in UDC driver and it attaches ZLP to IN packet if
>descri
From: Abbas Raza
There are 2 methods for ZLP (zero-length packet) generation:
1) In software
2) Automatic generation by device controller
1) is implemented in UDC driver and it attaches ZLP to IN packet if
descriptor->size < wLength
2) can be enabled/disabled by setting ZLT bit in the QH
Whe
On Fri, Jul 04, 2014 at 05:40:59PM +0500, Abbas Raza wrote:
> From: Abbas Raza
>
> When gadget driver is inserted and OTG is in host mode, interrupts
> occur which are not handled by chipidea driver causing following
> problem. To avoid this problem, don't allow insertion of gadget
> driver in ho
12 matches
Mail list logo
