On Thu, Dec 05, 2013 at 03:20:48PM +0800, Peter Chen wrote:
> Hi Greg,
>
> This patchset includes chipidea fixes for 3.13-rc2, the mainly
> fixes include add correct imx28 write register method, fixing
> un-initialized variable, etc.
>
> Chris Ruehl (2):
> usb: chipidea: Fix Internal error: : 8
When we need the PHY can be waken up by external signals,
we can call this API. Besides, we call mxs_phy_disconnect_line
at this API to close the connection between USB PHY and
controller, after that, the line state from controller is SE0.
Once the PHY is out of power, without calling mxs_phy_disco
This API is used to set wakeup enable at PHY registers, in that
case, the PHY can be waken up from suspend due to external events,
like vbus change, dp/dm change and id change.
Signed-off-by: Peter Chen
---
include/linux/usb/phy.h | 16
1 files changed, 16 insertions(+), 0 del
It is used to access un-regulator registers according to
different controllers.
Signed-off-by: Peter Chen
---
drivers/usb/phy/phy-mxs-usb.c |6 ++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index bf22970..c
Two PHY bugs are fixed by IC logic, but these bits are not
enabled by default, so we enable them at driver.
The two bugs are: MXS_PHY_ABNORMAL_IN_SUSPEND and MXS_PHY_SENDING_SOF_TOO_FAST
which are described at code.
Signed-off-by: Peter Chen
---
drivers/usb/phy/phy-mxs-usb.c | 23 +
We need this to keep PHY's power on or off during the system
suspend mode. If we need to enable USB wakeup, then we
must keep PHY's power being on during the system suspend mode.
Otherwise, we need to keep PHY's power being off to save power.
Signed-off-by: Peter Chen
---
drivers/usb/phy/phy-mxs
Change "high speed" to "HS"
Change "non-high speed" to "FS/LS"
Implementation of notify_suspend and notify_resume will be different
according to mxs_phy_data->flags.
Signed-off-by: Peter Chen
---
drivers/usb/phy/phy-mxs-usb.c |8
1 files changed, 4 insertions(+), 4 deletions(-)
di
Add "fsl,imx6q-usbphy" for imx6dq and imx6dl, add
"fsl,imx6sl-usbphy" for imx6sl.
Signed-off-by: Peter Chen
---
Documentation/devicetree/bindings/usb/mxs-phy.txt |3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt
b/Docume
Add anatop phandle which is used to access anatop registers to
control PHY's power and other USB operations.
Signed-off-by: Peter Chen
---
Documentation/devicetree/bindings/usb/mxs-phy.txt |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/Documentation/devicetree/bindings
It is needed by imx6 SoC series, but not for imx23 and imx28.
Signed-off-by: Peter Chen
---
drivers/usb/phy/phy-mxs-usb.c | 15 +++
1 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index 0c6f3bc..12671c5 1
After clear portsc.phcd, PHY needs 200us stable time for switch
32K clock to AHB clock.
Signed-off-by: Peter Chen
---
drivers/usb/phy/phy-mxs-usb.c | 11 +++
1 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
in
The mxs-phy has several bugs and features at different
versions, the driver code can get it through of_device_id.data.
Signed-off-by: Peter Chen
---
drivers/usb/phy/phy-mxs-usb.c | 58 ++--
1 files changed, 49 insertions(+), 9 deletions(-)
diff --git a/driv
The auto setting is used to open related power and clocks
automatically after receiving wakeup signal.
With this feature, the PHY's clock and power can be recovered
correctly from low power mode, it is guaranteed by IC logic.
Signed-off-by: Peter Chen
---
drivers/usb/phy/phy-mxs-usb.c | 20 ++
Hi Felipe & Shawn,
The serial adds power management support for MXS PHY, it includes:
- Add one PHY API .set_wakeup, and related API implementation at mxs phy driver
- misc changes and bug fixes for mxs phy to support low power mode and wakeup.
It is based on the lastest Greg's usb-next, 3.13-rc
On Thu, Dec 26, 2013 at 08:25:29PM -0600, Felipe Balbi wrote:
> Hi,
>
> On Fri, Dec 27, 2013 at 09:40:24AM +0800, Peter Chen wrote:
> > On Thu, Dec 26, 2013 at 09:58:01AM -0600, Felipe Balbi wrote:
> > > On Thu, Dec 26, 2013 at 03:36:03PM +0800, Peter Chen wrote:
> > > > Add clock enable/disable a
Replace RX_BUF_THR with RX_THR_HIGH.
Replace RWSUME_INDICATE with RESUME_INDICATE.
Add CRC_SIZE, TX_ALIGN, and RX_ALIGN.
Signed-off-by: Hayes Wang
---
drivers/net/usb/r8152.c | 27 ---
1 file changed, 16 insertions(+), 11 deletions(-)
diff --git a/drivers/net/usb/r8152.c
The old method to access PHY is through mdio channel. Replace it
with the OCP channel.
Signed-off-by: Hayes Wang
---
drivers/net/usb/r8152.c | 52 +
1 file changed, 18 insertions(+), 34 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/n
Split the contents of rtl8152_enable() into rtl_set_eee_plus() and
rtl_enable().
Signed-off-by: Hayes Wang
---
drivers/net/usb/r8152.c | 18 +++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 040ef73..537
The different chips may have different settings. This makes it easy
to let different chips have the same flow with differnt settings.
Signed-off-by: Hayes Wang
---
drivers/net/usb/r8152.c | 56 ++---
1 file changed, 49 insertions(+), 7 deletions(-)
di
Support new chip RTL8153 which is the USB 3.0 giga ethernet adapter.
Signed-off-by: Hayes Wang
---
drivers/net/usb/cdc_ether.c | 10 +
drivers/net/usb/r8152.c | 615 +++-
drivers/net/usb/r815x.c | 2 +-
3 files changed, 621 insertions(+), 6 dele
Change the locations of rtl8152_unload() and ocp_reg_write().
Signed-off-by: Hayes Wang
---
drivers/net/usb/r8152.c | 58 -
1 file changed, 29 insertions(+), 29 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 5107
Adjust the code to make it easy to add the settings for the new chip.
Then, add the relative parameters of the RTL8153.
Hayes Wang (6):
r8152: move rtl8152_unload and ocp_reg_write
r8152: modify the method of accessing PHY
r8152: change some definitions
r8152: add rtl_ops
r8152: split rt
Hi,
On Fri, Dec 27, 2013 at 09:40:24AM +0800, Peter Chen wrote:
> On Thu, Dec 26, 2013 at 09:58:01AM -0600, Felipe Balbi wrote:
> > On Thu, Dec 26, 2013 at 03:36:03PM +0800, Peter Chen wrote:
> > > Add clock enable/disable at .set_suspend if the PHY has
> > > suspend requirement, it can be benefit
On Thu, Dec 26, 2013 at 10:25:20AM -0600, Felipe Balbi wrote:
> Hi,
>
> On Tue, Dec 24, 2013 at 11:58:55AM +0800, Peter Chen wrote:
> > @@ -398,6 +433,29 @@ static int mxs_phy_remove(struct platform_device *pdev)
> > return 0;
> > }
> >
> > +static int mxs_phy_system_suspend(struct device *
On Thu, Dec 26, 2013 at 09:58:01AM -0600, Felipe Balbi wrote:
> On Thu, Dec 26, 2013 at 03:36:03PM +0800, Peter Chen wrote:
> > Add clock enable/disable at .set_suspend if the PHY has
> > suspend requirement, it can be benefit of power saving for
> > phy and the whole system (parent clock may also
On 12/20, David Brown wrote:
> On Thu, Dec 19, 2013 at 05:26:13PM -0600, Felipe Balbi wrote:
>
> >it's getting quite late for me. I still want to leave my stuff soaking
> >in linux-next for a while. I'll try my best, though, if you ack it ASAP
>
> Thanks. Patch 1 already has my Ack in it, and I'
This USB controller can work in as host-only, gadget-only or dual-role
modes. Rework the dependency on the USB and USB_GADGET configs in order
to allow building the driver when !USB or !USG_GADGET.
Signed-off-by: Ezequiel Garcia
---
Changes from v1: Remove unneeded parenthesis
drivers/usb/Kconf
Hi Greg,
Here's my overly extensive pull request for v3.14 merge window. Lots
of work has happened for next merge window.
All patches have been tested with all ARM defconfigs, i386_defconfig,
kvm_guest.config, x86_64_defconfig, plus quite a few randconfigs.
All latest 0-DAY reports have been fix
On Thu, 26 Dec 2013, Du, ChangbinX wrote:
> I can reproduce issue by adding a delay just after usb_set_intfdata(intf,
> NULL)
> (echo -1 > bConfigurationValue to trigger hub_dissconnect())without your
> patch.
>
> After patch applied, cannot reproduce and didn't found any other issue. Patch
>
Hi all,
my tree is now closed for v3.14 merge window. I'm testing a few last
patches then I'll merge everything on top of my 'next' branch and will
send a pull request to Greg by the end of the week.
I believe all major sparse errors have already been fixed.
We have a total of 105 non-merge comm
Hi,
On Tue, Dec 24, 2013 at 11:58:55AM +0800, Peter Chen wrote:
> @@ -398,6 +433,29 @@ static int mxs_phy_remove(struct platform_device *pdev)
> return 0;
> }
>
> +static int mxs_phy_system_suspend(struct device *dev)
> +{
> + struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
> +
> +
On Thu, Dec 26, 2013 at 03:36:03PM +0800, Peter Chen wrote:
> Add clock enable/disable at .set_suspend if the PHY has
> suspend requirement, it can be benefit of power saving for
> phy and the whole system (parent clock may also be disabled).
>
> Signed-off-by: Peter Chen
> ---
> drivers/usb/phy
Hello.
On 26-12-2013 16:24, Ezequiel Garcia wrote:
This USB controller can work in as host-only, gadget-only or dual-role
modes. Rework the dependency on the USB and USB_GADGET configs in order
to allow building the driver when !USB or !USG_GADGET.
Signed-off-by: Ezequiel Garcia
[...]
di
I'm resending this configuration rework to include one more patch in the
series, prior to the config change. The first patch removes the usb_disable()
usage, allowing the build the module for gadget-only mode usage.
Without the first patch, the build breaks when building for !USB && USB_GADGET.
Ho
Removing the check to usb_disable() before registering the platform
driver allows to build this driver when !USB && USB_GADGET, to be
used in gadget-only mode.
Also, use module_platform_driver() to register the platform driver.
Signed-off-by: Ezequiel Garcia
---
drivers/usb/musb/musb_core.c | 1
This USB controller can work in as host-only, gadget-only or dual-role
modes. Rework the dependency on the USB and USB_GADGET configs in order
to allow building the driver when !USB or !USG_GADGET.
Signed-off-by: Ezequiel Garcia
---
This is just a resend of a recently sent, standalone patch.
dr
Hi Kamil,
On Fri, Dec 20, 2013 at 6:54 PM, Kamil Debski wrote:
> Add support to PHY of USB2 of the Exynos 5250 SoC.
>
> Signed-off-by: Kamil Debski
> ---
> arch/arm/boot/dts/exynos5250.dtsi | 33 ---
> drivers/phy/phy-exynos5250-usb2.c | 64
> ++
Hi Kamil,
On Fri, Dec 20, 2013 at 6:54 PM, Kamil Debski wrote:
> Change the phy provider used from the old one using the USB phy
> framework to a new one using the Generic phy framework.
>
> Signed-off-by: Kamil Debski
> Signed-off-by: Kyungmin Park
Commit title:
s/ehci-s5p/ehci-exynos
> ---
> > On Tue, 24 Dec 2013, Alan Stern wrote:
> > I think this will fix it. Take a close look and do some careful testing.
> >
> > Alan Stern
> >
> > Index: usb-3.13/drivers/usb/core/hub.c
> >
> ==
> > --- usb-3.13.orig/drivers/usb/core/hub.c
>
Add clock enable/disable at .set_suspend if the PHY has
suspend requirement, it can be benefit of power saving for
phy and the whole system (parent clock may also be disabled).
Signed-off-by: Peter Chen
---
drivers/usb/phy/phy-generic.c | 10 ++
1 files changed, 10 insertions(+), 0 del
40 matches
Mail list logo
