Hi ,
if i disconnect the hub, after the timeout error , i get these errors...
[ 295.496749] hub 4-1:1.0: cannot reset port 3 (err = -71)
[ 301.507153] xhci-hcd xhci-hcd: xHCI host not responding to stop endpoint
command.
[ 301.513153] xhci-hcd xhci-hcd: Assuming host is dying, halting host.
> Wow, you do realize just how old that kernel version is, right? And how
> far power management has come since it was released?
Yes, I do.
It is strange but Texas do not want to move to higher kernel for this family -
there is an official support only for 2.6.37 - maybe due to DSP in DM37 etc
On Fri, Aug 17, 2012 at 12:34:11PM +0200, Sebastian Andrzej Siewior wrote:
> On 08/17/2012 12:30 PM, Andrzej Pietrasiewicz wrote:
> >>There is a separation between "setting myself up" and "seeing that a host
> >>wants to talk to me". You are a woman. And if you not done yet done you
> >ignore
> >>t
Hi,
On Sat, Aug 18, 2012 at 9:34 PM, Peter Meerwald wrote:
>
> 3.6-rc2 fails to compile with
> CONFIG_USB_MUSB_HDRC=m
> CONFIG_USB_MUSB_OMAP2PLUS=m
>
> LD init/built-in.o
> drivers/built-in.o: In function `twl4030_usb_irq':
> /home/pmeerw/linux-3.6-rc2/drivers/usb/otg/twl4030-usb.c:518: un
On Sun, Aug 19, 2012 at 06:50:35PM +, Karl wrote:
> Hi,
>
> I want to decrease power and to start using usb power management on linux
> kernel
> 2.6.37 (from TI Argo project) for DM3730 (Cortex A8) - hardware used for
> prototyping is omap3evm or Beagleboard XM. I have connected HS usb dev
On Sun, Aug 19, 2012 at 1:17 PM, Sebastian Andrzej Siewior
wrote:
> On Sat, Aug 18, 2012 at 10:18:01AM -0700, Kevin Cernekee wrote:
>
> This is a quick look :)
Thanks for the review.
>> + for (i = 0; i < NUM_IUDMA; i++)
>> + if (udc->iudma[i].irq == irq)
>> +
On Sat, Aug 18, 2012 at 10:18:01AM -0700, Kevin Cernekee wrote:
This is a quick look :)
> diff --git a/drivers/usb/gadget/bcm63xx_udc.c
> b/drivers/usb/gadget/bcm63xx_udc.c
> new file mode 100644
> index 000..da68f43
> --- /dev/null
> +++ b/drivers/usb/gadget/bcm63xx_udc.c
> +static irqret
If USB2 host controller probes fine but USB3 does not then we don't
remove the USB controller properly and lock up the system while the HUB
code will try to enumerate the USB2 controller and access memory which
is no longer available in case the dummy_hcd was compiled as a module.
This is a proble
Without a reply for USB_DT_BOS the USB3 mode does not work since
448b6eb1 ("USB: Make sure to fetch the BOS desc for roothubs.).
Cc: sta...@kernel.org #v3.5
Signed-off-by: Sebastian Andrzej Siewior
---
drivers/usb/gadget/dummy_hcd.c | 33 +
1 file changed, 33 in
Hi,
I want to decrease power and to start using usb power management on linux
kernel
2.6.37 (from TI Argo project) for DM3730 (Cortex A8) - hardware used for
prototyping is omap3evm or Beagleboard XM. I have connected HS usb device with
autoidle turn on.
Is a good idea to turn on autoidle in
https://bugzilla.kernel.org/show_bug.cgi?id=46201
I have a device that uses a FTDI USB-to-serial chip identified by lsusb as:
Bus 001 Device 051: ID 0403:6014 Future Technology Devices International, Ltd
Only recently, within 24 hours, it will error like this, at which point the
FTDI driver beco
On Sun, Aug 19, 2012 at 12:23:38PM +0200, Bjørn Mork wrote:
> Ming Lei writes:
> > On Fri, Aug 17, 2012 at 10:42 PM, Greg Kroah-Hartman
> > wrote:
> >> On Fri, Aug 17, 2012 at 10:38:16AM -0400, Alan Stern wrote:
> >>> On Fri, 17 Aug 2012, Ming Lei wrote:
> >>>
> >>> > But, if HOTPLUG is not enab
On Sun, Aug 19, 2012 at 6:13 PM, Dr. Ing. Dieter Jurzitza
wrote:
> Dear Andiry,
> I do not know wether or not you received this email as you quit from AMD and I
> accidentally lost your new email address when the reply came in
> If you find the time to look further into this I would be very h
On Sun, 19 Aug 2012, [ISO-8859-1] Arnaud Ren� Ober wrote:
> Hello,
>
> I send you this mail because I have a problem with some usb components,
> especially webcam which isn't recognized after 2.6 kernel.
> My computer is an Acer Aspire v5-431, released in June / July.
Please post the dmesg log
On 17/08/12 13:39, Sebastian Andrzej Siewior wrote:
>> .lep= 0,
>> .eptype = EP_CTL_TYPE,
>> },
>> .ep[1] = {
>> .ep = {
>> .name = "ep1-int",
>> .ops=&lp
On 17/08/12 11:42, Sebastian Andrzej Siewior wrote:
> Some minor things:
> - please use to_udc() in start then
> - would it make sense to use platform_get_drvdata() in
> lpc32xx_udc_shutdown() ?
> - could you please remove struct usb_endpoint_descriptor from struct
> lpc32xx_ep? It has been rem
This patch removes an unused statically defined array and an associated #define.
Signed-off-by: Roland Stigge
---
Applies to v3.6-rc2
drivers/usb/phy/isp1301.c |6 --
1 file changed, 6 deletions(-)
--- linux-2.6.orig/drivers/usb/phy/isp1301.c
+++ linux-2.6/drivers/usb/phy/isp1301.c
@@
Ming Lei writes:
> On Fri, Aug 17, 2012 at 10:42 PM, Greg Kroah-Hartman
> wrote:
>> On Fri, Aug 17, 2012 at 10:38:16AM -0400, Alan Stern wrote:
>>> On Fri, 17 Aug 2012, Ming Lei wrote:
>>>
>>> > But, if HOTPLUG is not enabled, should device_add() trigger driver probe
>>> > further after kernel i
Hello,
I send you this mail because I have a problem with some usb components,
especially webcam which isn't recognized after 2.6 kernel.
My computer is an Acer Aspire v5-431, released in June / July.
Result of lsusb from 3.5 kernel :
/Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated R
19 matches
Mail list logo
