Hi!
> > > My testing shows that:
> > > 1. If I remove uvcvideo BEFORE suspend and reinsert it after resume,
> > >
> > > it works. However, I cannot always rmmod uvcvideo before suspend
> > > as it may be in use.
...
> > > I think uvcvideo is failing to reinitialize the camera on resume
On Sunday 04 April 2010 21:34:06 Pavel Machek wrote:
> Hi!
>
> > > If unload/reload of uvcvideo helps, it is most likely problem in that.
> > >
> > > If unload/reload of ehci_hcd is needed, it is most likely ehci problem.
> >
> > My testing shows that:
> > 1. If I remove uvcvideo BEFORE suspend
On Tue 2010-04-06 11:32:46, Mohamed Ikbel Boulabiar wrote:
> Hi !
>
> > Ok, that puts the problem firmly into uvcvideo area.
> >
> > Try changing its _resume routine to whatever is done on device
> > unplug... it should be rather easy, and is quite close to "correct"
> > solution.
>
> I am waitin
Hi !
> Ok, that puts the problem firmly into uvcvideo area.
>
> Try changing its _resume routine to whatever is done on device
> unplug... it should be rather easy, and is quite close to "correct"
> solution.
I am waiting to try that.
If I always need to rmmod/modprobe everytime, that is meaning
Hi!
> > If unload/reload of uvcvideo helps, it is most likely problem in that.
> >
> > If unload/reload of ehci_hcd is needed, it is most likely ehci problem.
>
> My testing shows that:
>
> 1. If I remove uvcvideo BEFORE suspend and reinsert it after resume,
> it works. However, I cannot
Pavel Machek writes:
> Hi!
>
> > > > Do you mean the dmesg output ?
> > > > A full dmesg is included in this address :
> > > > http://pastebin.com/8XU619Uk
> > > > Not in all suspend/hibernate the problem comes, only in some of them
> > > > and this included dmesg output is just after a non work
Hi!
> > > Do you mean the dmesg output ?
> > > A full dmesg is included in this address :
> > > http://pastebin.com/8XU619Uk
> > > Not in all suspend/hibernate the problem comes, only in some of them
> > > and this included dmesg output is just after a non working case of
> > > webcam fault.
> > >
Pavel Machek writes:
> > Do you mean the dmesg output ?
> > A full dmesg is included in this address :
> > http://pastebin.com/8XU619Uk
> > Not in all suspend/hibernate the problem comes, only in some of them
> > and this included dmesg output is just after a non working case of
> > webcam fault.
Hi!
> Do you mean the dmesg output ?
> A full dmesg is included in this address :
> http://pastebin.com/8XU619Uk
> Not in all suspend/hibernate the problem comes, only in some of them
> and this included dmesg output is just after a non working case of
> webcam fault.
>
>
> I also have found thi
Hi,
Do you mean the dmesg output ?
A full dmesg is included in this address :
http://pastebin.com/8XU619Uk
Not in all suspend/hibernate the problem comes, only in some of them
and this included dmesg output is just after a non working case of
webcam fault.
I also have found this in `/var/log/mes
Hi Mohamed,
On Tuesday 30 March 2010 23:55:38 Mohamed Ikbel Boulabiar wrote:
> Hi,
>
> After suspend/resume, I have my webcam no more working.
> The /dev/video0 file still exist, but the webcam won't be used until I do
> this : rmmod uvcvideo
> modprobe uvcvideo
> (2.6.31.8-0.1)
>
> This is
Hi,
After suspend/resume, I have my webcam no more working.
The /dev/video0 file still exist, but the webcam won't be used until I do this :
rmmod uvcvideo
modprobe uvcvideo
(2.6.31.8-0.1)
This is may be caused by a bug somewhere.
These are more information about my hardware :
I have Microdi
12 matches
Mail list logo
