[snip]
> >> >
> >>
> >> H Hermann
> >>
> >> thanks for your suggestion .
> >> No improvement with changing the quirk to 0xfd ,
> >> I still get the same error messages :
> >> i2c-adapter i2c-1: Invalid 7-bit address 0x7a
> >> saa7133[0]: i2c xfer: < 8e >
> >> input: i2c IR (Pinnacle PCTV) as
On 9 Jul, hermann pitton wrote:
>
>
> Am Mittwoch, den 08.07.2009, 21:07 +0200 schrieb
> eric.patur...@orange.fr:
>> > Hi Eric,
>> >
>> > yes, arbitration lost on i2c is an error condition.
>> >
>> > As far I know we did not change the bus speed or anything, but some
>> > cards need and i2c qu
Am Mittwoch, den 08.07.2009, 21:07 +0200 schrieb
eric.patur...@orange.fr:
> > Hi Eric,
> >
> > yes, arbitration lost on i2c is an error condition.
> >
> > As far I know we did not change the bus speed or anything, but some
> > cards need and i2c quirk to work correctly with the clients.
> >
> >
> Hi Eric,
>
> yes, arbitration lost on i2c is an error condition.
>
> As far I know we did not change the bus speed or anything, but some
> cards need and i2c quirk to work correctly with the clients.
>
> Mike recently changed the old quirk with good reasons and it was widely
> tested, also by
[snip]
> > > Maybe your card is a rare case needing the old quirk.
> >
> > I've already testes in the Pinnacle board and the quirk did not cause
> > any new problems.
> >
Mike, I don't have any doubts in your testing on the Pinnacle 300i,
around 2004/2005, but the 50i is a very different kind of
Hi Mike,
Am Dienstag, den 07.07.2009, 19:18 -0400 schrieb Michael Krufky:
> On Tue, Jul 7, 2009 at 4:45 PM, hermann pitton wrote:
> > As far I know we did not change the bus speed or anything, but some
> > cards need and i2c quirk to work correctly with the clients.
> >
> > Mike recently changed t
On Tue, Jul 7, 2009 at 4:45 PM, hermann pitton wrote:
> As far I know we did not change the bus speed or anything, but some
> cards need and i2c quirk to work correctly with the clients.
>
> Mike recently changed the old quirk with good reasons and it was widely
> tested, also by me, without any ne
Am Dienstag, den 07.07.2009, 08:44 +0200 schrieb
eric.patur...@orange.fr:
> >
> > Hi Eric,
> >
> > on a first short look only at lsmod and your kernel .config,
> > I can see tda8290 and tda827x are not loaded and you have nothing
> > conflicting in your kernel .config.
> >
> > Must be a bug in
>
> Hi Eric,
>
> on a first short look only at lsmod and your kernel .config,
> I can see tda8290 and tda827x are not loaded and you have nothing
> conflicting in your kernel .config.
>
> Must be a bug in the build system and I need to get a recent 2.6.30 I
> guess, since else not reproducible.
Am Montag, den 06.07.2009, 23:47 +0200 schrieb eric.patur...@orange.fr:
> >
> > I did fake your card on 2.6.29 to exclude to have "improvements" on
> > those cards I have, which also support DVB-T and DVB-S.
> >
> > What was learned previously is, that a missing tda8290 module is
> > replaced by
Hi Eric,
Am Sonntag, den 05.07.2009, 09:08 +0200 schrieb eric.patur...@orange.fr:
> On 4 Jul, hermann pitton wrote:
> >
> >
> > Am Samstag, den 04.07.2009, 20:05 +0200 schrieb eric.patur...@orange.fr:
> >> On 4 Jul, hermann pitton wrote:
> >> >
> >> > Hello,
> >> >
> >> > Am Samstag, den 04.
Am Samstag, den 04.07.2009, 20:05 +0200 schrieb eric.patur...@orange.fr:
> On 4 Jul, hermann pitton wrote:
> >
> > Hello,
> >
> > Am Samstag, den 04.07.2009, 15:16 +0200 schrieb eric.patur...@orange.fr:
> >> hello
> >>
> >> I had my Pinnacle PCTV 50i analog tv card working quite well for sev
On 4 Jul, hermann pitton wrote:
>
> Hello,
>
> Am Samstag, den 04.07.2009, 15:16 +0200 schrieb eric.patur...@orange.fr:
>> hello
>>
>> I had my Pinnacle PCTV 50i analog tv card working quite well for several
>> years
>> with linux . but since mid june it can not tune anymore when using the
Hello,
Am Samstag, den 04.07.2009, 15:16 +0200 schrieb eric.patur...@orange.fr:
> hello
>
> I had my Pinnacle PCTV 50i analog tv card working quite well for several
> years
> with linux . but since mid june it can not tune anymore when using the latest
> mercurial version
> of the v4l2 drive
hello
I had my Pinnacle PCTV 50i analog tv card working quite well for several years
with linux . but since mid june it can not tune anymore when using the latest
mercurial version
of the v4l2 drivers .
It is working fine up to the official V4l2 driver of 2.6.30 .
here is an example of /var
15 matches
Mail list logo
