27.02.2012 00:14, Ralph Metzler kirjoitti:
> Anssi Hannula writes:
> > > I had it running for an hour and had no discontinuities (except at
> > > restarts, might have to look into buffer flushing).
> > > I tested it with nGene and Octopus boards on an Asus ION2 board and on a
> > > Marvell Kirk
Anssi Hannula writes:
> > I had it running for an hour and had no discontinuities (except at
> > restarts, might have to look into buffer flushing).
> > I tested it with nGene and Octopus boards on an Asus ION2 board and on a
> > Marvell Kirkwood based ARM board.
>
> Should your test code (q
Hello,
13.05.2011 14:54, Ralph Metzler kirjoitti:
> Below my test code. You just need to adjust the device name.
>
> I had it running for an hour and had no discontinuities (except at
> restarts, might have to look into buffer flushing).
> I tested it with nGene and Octopus boards on an Asus ION2
Issa Gorissen writes:
> On 11/05/11 15:12, Issa Gorissen wrote:
> > From: Ralph Metzler
> >> Issa Gorissen writes:
> >> > Could you please take a look at the cxd2099 issues ?
> >> >
> >> > I have attached a version with my changes. I have tested a lot of
> >> > different settings with
On 11/05/11 15:12, Issa Gorissen wrote:
> From: Ralph Metzler
>> Issa Gorissen writes:
>> > Could you please take a look at the cxd2099 issues ?
>> >
>> > I have attached a version with my changes. I have tested a lot of
>> > different settings with the help of the chip datasheet.
>> >
>>
From: Ralph Metzler
> Issa Gorissen writes:
> > Could you please take a look at the cxd2099 issues ?
> >
> > I have attached a version with my changes. I have tested a lot of
> > different settings with the help of the chip datasheet.
> >
> > Scrambled programs are not handled correctly. I
> -Original Message-
> From: Issa Gorissen [mailto:flo...@usa.net]
> Sent: mercredi 11 mai 2011 15:13
> To: Ralph Metzler
> Cc: Linux Media Mailing List; S-bastien RAILLARD; Oliver Endriss
> Subject: Re: DVB nGene CI : TS Discontinuities issues
>
> From: Ralph Me
On 09/05/11 09:04, Sébastien RAILLARD (COEXSI) wrote:
>> I don't know if CAT needs to be in the stream passed through sec0 as
>> Sebastien mentioned, so I modified gnutv to add it to dvr.
>>
> Yes, the CAT table is mandatory, it must be sent to the CAM, as well as :
> * the EMM PID referenced in th
> -Original Message-
> From: Issa Gorissen [mailto:flo...@usa.net]
> Sent: lundi 9 mai 2011 02:42
> To: Ralph Metzler
> Cc: Linux Media Mailing List; "Sébastien RAILLARD (COEXSI)"; Oliver
> Endriss; Martin Vidovic
> Subject: Re: DVB nGene CI : TS Disconti
On 07/05/11 23:34, Ralph Metzler wrote:
> I do not have any cxd2099 issues.
> I have a simple test program which includes a 32bit counter as payload
> and can pump data through the CI with full speed and have no packet
> loss. I only tested decoding with an ORF stream and an Alphacrypt CAM
> but a
On 07/05/11 23:34, Ralph Metzler wrote:
> Before blaming packet loss on the CI data path also please make
> certain that you have no buffer overflows in the input part of
> the sec device.
> In the ngene driver you can e.g. add a printk in tsin_exchange():
>
> if (dvb_ringbuffer_free(&dev->tsin_rb
On 03/05/11 12:59, Sébastien RAILLARD (COEXSI) wrote:
> Dear all,
>
> I'm doing some tests with the CI interface of the "Linux4Media cineS2 DVB-S2
> Twin Tuner (v5)" card.
> I notice some TS discontinuities during my tests.
>
> My setup:
> - Aston Viaccess Pro CAM
> - Linux4Media cineS2 DVB-S2 Twin
12 matches
Mail list logo
