On Tue, 2011-02-22 at 14:34 +0200, Dennis Kurten wrote:
> On Tue, Feb 15, 2011 at 4:23 PM, Dennis Kurten
> wrote:
> > Hello Andy, I've tried some of your suggestions, but no luck so far.
> >
> >
> > On Tue, Feb 15, 2011 at 4:09 AM, Andy Walls wrote:
> >> On Mon, 2011-02-14 at 13:35 +0200, Dennis
On Tue, Feb 15, 2011 at 4:23 PM, Dennis Kurten wrote:
> Hello Andy, I've tried some of your suggestions, but no luck so far.
>
>
> On Tue, Feb 15, 2011 at 4:09 AM, Andy Walls wrote:
>> On Mon, 2011-02-14 at 13:35 +0200, Dennis Kurten wrote:
>>> Hello,
>>>
>>> This card (technisat cablestar hd 2 d
I've finally managed to make some measurements on the adapter card
regarding power. At the soldering where the wires from the molex are
connected there is indeed both 5 & 12V. I haven't successfully measured
the PCI pins directly though, but they should be up the specs if there
isn't some internal
Hello Andy, I've tried some of your suggestions, but no luck so far.
On Tue, Feb 15, 2011 at 4:09 AM, Andy Walls wrote:
> On Mon, 2011-02-14 at 13:35 +0200, Dennis Kurten wrote:
>> Hello,
>>
>> This card (technisat cablestar hd 2 dvb-c) works fine when plugged
>> into a native PCI slot.
>> When
Dennis Kurten wrote:
>The power issue did cross my mind after some more research. Maybe
>that would explain why the card is registering correctly but not
>returning
>any tuned data. I haven't found any detailed requirement specs for the
>tv card but I assume that the tuner/demodulator could consu
The power issue did cross my mind after some more research. Maybe
that would explain why the card is registering correctly but not returning
any tuned data. I haven't found any detailed requirement specs for the
tv card but I assume that the tuner/demodulator could consume a fair
amount of power. H
last, but not least, that i totally forgot - on my tests with audio
card PEX 8111/8112 adapter is stuttering to transfer 8 channel, 192
kHz, 24-bit audio, which is very small data rate comparing to DVB data
- i'm not sure though, it's because of increased latency or PEX
8111/8112 adapter can't hand
oh, i have just noticed your DVB card is for Cable and not for
Satellite, but still it may use 12V PCI interface pins for something
else and not exactly for LNB power as i thought assuming it's DVB-S/S2
DVB card.
On Tue, Feb 15, 2011 at 10:18 AM, Konstantin Dimitrov
wrote:
> hi, does your DVB car
hi, does your DVB card can get signal lock when it's inserted into the
PCI-to-PCIE adapter, because as far as i know most PCI-to-PCIE
adapters based on PEX 8111/8112 don't provide power to 12V pins of the
PCI interface, which probably all PCI DVB card use for LNB power. so,
what i would check if i
On Mon, 2011-02-14 at 13:35 +0200, Dennis Kurten wrote:
> Hello,
>
> This card (technisat cablestar hd 2 dvb-c) works fine when plugged
> into a native PCI slot.
> When I try it with a PCI-adapter I intend to use in mITX-builds there
> doesn't seem
> to be any data coming in through the tuner. The
Hello,
This card (technisat cablestar hd 2 dvb-c) works fine when plugged
into a native PCI slot.
When I try it with a PCI-adapter I intend to use in mITX-builds there
doesn't seem
to be any data coming in through the tuner. The adapter is a
transparent bridge (with a
PEX 8112 chip) that goes into
11 matches
Mail list logo
