Hi,
I made a change on the tuner parameters and it worked perfectly.
This is the change, on ec168.c, line 245:
.cap_select = MXL_CAP_SEL_DISABLE,
So if anyone has a MinTV usb 2.0 DUTV007 dvb-t card an it is not tuning
properly, changing MXL_CAP_SEL_ENABLE to MXL_CAP_SEL_DISABLE co
t.Hgch wrote:
Hi,
I found that my card isn't locking on certain frequencies,Could it be a
problem of signal strength? In widows it gets all channels though.
Your signal strength is not enough. I think Linux mxl5005s tuner driver
does not have as good performance as Windows. You can try to cha
Hi,
I found that my card isn't locking on certain frequencies,Could it be a
problem of signal strength? In widows it gets all channels though.
Here is the log:
[41630.298168] ec100_init
[41630.299611] 40 21 ff 00 c6 01 01 00 >>> 00
[41630.301225] 40 21 09 00 c6 01 02 00 >>> b1 fe
[41630.302605]
Tanguy PRUVOT wrote:
There is a Linux EC168 (with MxL) driver available Where can i find
it ?
http://linuxtv.org/hg/~anttip/ec168/
Antti
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at
Hi,
I opened de device and it is definitely an EC168 and a MXL5003s, also to
my surprise on the chipset it is written DUTV007 instead of DUTV002,
which was the model number that was written in the package.
However when scanning I get errors and only finds about a third of
available services at be
t.Hgch wrote:
Partially received? If there is really MT2060 tuner then channels should
not be received at all.
I checked again and i am getting a couple of dtv channels and some more
radio channels, and they display/sound pretty well.
Then the tuner must be MXL5003S because it is only tuner
Hi,
> Partially received? If there is really MT2060 tuner then channels should
> not be received at all.
I checked again and i am getting a couple of dtv channels and some more
radio channels, and they display/sound pretty well.
I'm sure that the card model is the one I previously mentioned,
moi,
t.Hgch wrote:
I also followed this post to get streams from the EC168:
https://www.dealextreme.com/forums/Default.dx/sku.8325~threadid.278942
However my card is a MinTv usb 2.0 dvb-t DUTV002, which seems to be
using a MT2060 tuner. Some channels where partially received. Let me
Partially
Antti Palosaari wrote:
I have done some work but not very much. Basically it now loads firmware
and and have some basic demod and tuner stuff. I have now one one
problem that I have no idea why. After firmware download device
reconnects (upon request as seen from sniff) with vendor and product
Tanguy,
are you still hacking with device? Or is there anyone else who is?
I have done some work but not very much. Basically it now loads firmware
and and have some basic demod and tuner stuff. I have now one one
problem that I have no idea why. After firmware download device
reconnects (upon
Tanguy Pruvot wrote:
#define CMD_EC168_RAM 0x00 //RW- Read/Write RAM (Firmware go to addr
0-0x1EFF)
#define CMD_EC168_GETSTATUS 0x01 //R-- ex:
dfu_ctrl_get(device,0x01,0x,0x01A0,buffer,0x1A);
#define CMD_EC168_STREAM0x03 //R-X ex: dfu_ctrl(device,0x03,0/0x20,0xFF00);
Peter Nemeik wrote:
Hallo,
I am looking for Firmware Drivers for the LogiLink VG0002 USB2.0 DVB-T
Stick.
There is a Tuner Chip Maxlinear MXL 5003S and
a Chip from EC168 (EC168.com) XCMK27819X.
I had the Information from the LogiLink Hotline.
MXL5003 is supported but EC168 is not. There is n
12 matches
Mail list logo
