On 01/04/2017 07:26 AM, Fabio Estevam wrote:
On Tue, Jan 3, 2017 at 6:57 PM, Steve Longerbeam wrote:
+ camera: ov5642@3c {
+ compatible = "ovti,ov5642";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ov5642>;
+ clocks = <&cl
On 01/04/2017 04:33 AM, Vladimir Zapolskiy wrote:
+
+ camera: ov5642@3c {
ov5642: camera@3c
done.
+ pwdn-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* SD1_DAT0 */
+ reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; /* SD1_DAT1 */
Comments about SD1_* pad names are
On Tue, Jan 3, 2017 at 6:57 PM, Steve Longerbeam wrote:
> + camera: ov5642@3c {
> + compatible = "ovti,ov5642";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ov5642>;
> + clocks = <&clks IMX6QDL_CLK_CKO>;
> + c
On 01/03/2017 10:57 PM, Steve Longerbeam wrote:
> Enables the OV5642 parallel-bus sensor, and the OV5640 MIPI CSI-2 sensor.
>
> The OV5642 connects to the parallel-bus mux input port on ipu1_csi0_mux.
>
> The OV5640 connects to the input port on the MIPI CSI-2 receiver on
> mipi_csi. It is set to
Enables the OV5642 parallel-bus sensor, and the OV5640 MIPI CSI-2 sensor.
The OV5642 connects to the parallel-bus mux input port on ipu1_csi0_mux.
The OV5640 connects to the input port on the MIPI CSI-2 receiver on
mipi_csi. It is set to transmit over MIPI virtual channel 1.
Until the OV5652 sen
