Hi Jan,
On 05/08/2018 07:13 AM, Jan Lübbe wrote:
Hi,
On Mon, 2018-05-07 at 11:21 -0700, Steve Longerbeam wrote:
In other words, if the sensor bus is parallel, only 8-bit bus UYVY_2x8
and YUYV_2x8 can be routed to the IC pad or component packed/unpacked
by the IDMAC pad. All other sensor forma
Hi,
On Mon, 2018-05-07 at 11:21 -0700, Steve Longerbeam wrote:
> On 05/07/2018 07:23 AM, Jan Lübbe wrote:
> > On Sat, 2018-05-05 at 15:22 -0700, Steve Longerbeam wrote:
> > > I reviewed this patch series, and while I don't have any
> > > objections to the code-level changes, but my question
> > >
On 05/07/2018 07:23 AM, Jan Lübbe wrote:
Hi Steve,
thanks for reviewing!
On Sat, 2018-05-05 at 15:22 -0700, Steve Longerbeam wrote:
I reviewed this patch series, and while I don't have any
objections to the code-level changes, but my question
is more specifically about how the IPU/CSI deals
Hi Steve,
thanks for reviewing!
On Sat, 2018-05-05 at 15:22 -0700, Steve Longerbeam wrote:
> I reviewed this patch series, and while I don't have any
> objections to the code-level changes, but my question
> is more specifically about how the IPU/CSI deals with
> receiving RGB565 over a parallel
Hi Jan, Philipp,
I reviewed this patch series, and while I don't have any
objections to the code-level changes, but my question
is more specifically about how the IPU/CSI deals with
receiving RGB565 over a parallel bus.
My understanding was that if the CSI receives RGB565
over a parallel 8-bit s
The IPU can only capture RGB565 with two 8-bit cycles in bayer/generic
mode on the parallel bus, compared to a specific mode on MIPI CSI-2.
To handle this, we extend imx_media_pixfmt with a cycles per pixel
field, which is used for generic formats on the parallel bus.
Before actually adding RGB565
