On Wed, Oct 30, 2024 at 8:28 AM Sicelo wrote:
>
> Hi
>
> On Wed, Oct 30, 2024 at 01:38:11PM +0100, Joerg Roedel wrote:
> > On Wed, Oct 30, 2024 at 12:20:31PM +0100, H. Nikolaus Schaller wrote:
> > > Why that? There was a discussion and everyone agreed to remove omap2,
> > > but not omap3 and later
On Sun, Oct 20, 2019 at 2:16 PM Adam Ford wrote:
>
> On Sun, Oct 20, 2019 at 1:02 PM Laurent Pinchart
> wrote:
> >
> > Hi Adam,
> >
> > On Sun, Oct 20, 2019 at 09:45:25AM -0500, Adam Ford wrote:
> > > I am running a DM3730 connected to an mt9p031 sen
On Mon, Oct 21, 2019 at 3:48 AM Philipp Zabel wrote:
>
> Hi Adam, Fabio,
>
> On Fri, 2019-10-18 at 16:00 -0300, Fabio Estevam wrote:
> > Hi Adam,
> >
> > Adding Steve and Philipp in case they can help.
> >
> > On Tue, Oct 15, 2019 at 1:52 AM Adam Ford wr
On Sun, Oct 20, 2019 at 1:02 PM Laurent Pinchart
wrote:
>
> Hi Adam,
>
> On Sun, Oct 20, 2019 at 09:45:25AM -0500, Adam Ford wrote:
> > I am running a DM3730 connected to an mt9p031 sensor, and the ISP is
> > running in 8-bit parallel mode.
> >
> > I ha
On Sun, Oct 20, 2019 at 12:39 PM Laurent Pinchart
wrote:
>
> Hi Hans,
>
> On Sun, Oct 20, 2019 at 07:26:20PM +0200, Hans Verkuil wrote:
> > On 10/20/19 7:35 AM, Laurent Pinchart wrote:
> > > On Sat, Oct 19, 2019 at 11:14:03AM -0500, Adam Ford wrote:
> > >>
I am running a DM3730 connected to an mt9p031 sensor, and the ISP is
running in 8-bit parallel mode.
I have the sensor endpoint configured as:
mt9p031_out: endpoint {
input-clock-frequency = <2400>;
pixel-clock-frequency = <7200>;
remote-endpoint = <&ccdc_ep>;
};
I was loo
On Sun, Oct 20, 2019 at 12:35 AM Laurent Pinchart
wrote:
>
> Hi Adam,
>
> On Sat, Oct 19, 2019 at 11:14:03AM -0500, Adam Ford wrote:
> > On Fri, Oct 18, 2019 at 4:17 PM Sakari Ailus wrote:
> > > On Fri, Oct 18, 2019 at 04:10:23PM -0500, Adam Ford wrote:
> > &
On Fri, Oct 18, 2019 at 4:17 PM Sakari Ailus wrote:
>
> On Fri, Oct 18, 2019 at 04:10:23PM -0500, Adam Ford wrote:
> > On Fri, Oct 18, 2019 at 4:00 PM Sakari Ailus wrote:
> > >
> > > HI Adam,
> > >
> > > On Fri, Oct 18, 2019 at 02:38:57PM -0500,
On Fri, Oct 18, 2019 at 4:00 PM Sakari Ailus wrote:
>
> HI Adam,
>
> On Fri, Oct 18, 2019 at 02:38:57PM -0500, Adam Ford wrote:
> > I have a DM3730 with a parallel mt9p031 sensor attached. I am trying
> > to troubleshoot some issues with streaming video with G-streame
I have a DM3730 with a parallel mt9p031 sensor attached. I am trying
to troubleshoot some issues with streaming video with G-streamer, but
I I think the issue is in how the ISP driver reports the video info.
I have the pipeline to grab from the resizer:
media-ctl -v -V '"mt9p031 1-0048":0 [SGRBG
I have an i.MX6Q with an ov5640 connected to the mipi-csi2 interface.
I am routing ov5640 -> ipu1_csi0_mux -> ip1_csi0 -> ip1_csi0 capture.
I am trying to go through the steps to attempt to get 60fps at
640x480, but the best I can appear to acheive is 30fps.
v4l2-ctl --all
Streaming Parameters
On Sat, Dec 22, 2018 at 11:09 AM Tony Lindgren wrote:
>
> * Sebastian Reichel [181221 01:18]:
> > The new code has been tested on the Motorola Droid 4. For testing the audio
> > should be configured to route Ext to Speaker or Headphone. Then you need to
> > plug headphone, since its cable is used
On Fri, Dec 21, 2018 at 9:00 PM Sebastian Reichel wrote:
>
> Hi,
>
> On Fri, Dec 21, 2018 at 03:10:52PM -0600, Adam Ford wrote:
> > On Fri, Dec 21, 2018 at 2:13 AM Sebastian Reichel wrote:
> > >
> > > From: Sebastian Reichel
> > >
> > &g
On Fri, Dec 21, 2018 at 2:13 AM Sebastian Reichel wrote:
>
> From: Sebastian Reichel
>
> This driver has been superseded by the serdev based Bluetooth
> hci_ll driver, which is initialized from DT. All mainline users
> have been converted and this driver can be safely dropped.
There seems to be
On Thu, Dec 20, 2018 at 7:18 PM Sebastian Reichel wrote:
>
> From: Sebastian Reichel
>
> Add a node for the UART part of WiLink chip.
>
> Cc: Adam Ford
> Signed-off-by: Sebastian Reichel
> ---
> This is compile tested only!
I have tried this a few times, unfo
; Fixes: 6949d864776e ("media: ov5640: do not change mode if format or frame
> interval is unchanged")
> Signed-off-by: Jacopo Mondi
> Signed-off-by: Maxime Ripard
Tested-by: Adam Ford #imx6 w/ CSI2 interface on
4.19.6 and 4.20-RC5
> ---
> drivers/media/i2c/ov5640.c
On Mon, Dec 3, 2018 at 10:28 AM Adam Ford wrote:
>
> On Thu, Nov 29, 2018 at 8:49 AM Jacopo Mondi
> wrote:
> >
> > The MIPI clock generation tree uses the MIPI_DIV divider to generate both
> > the
> > MIPI SCALER CLOCK and the PIXEL_CLOCK. It seems t
;media: ov5640: do not change mode if format or frame
> interval is unchanged")
> Signed-off-by: Jacopo Mondi
For patch 1 of 2 only,
Tested-by: Adam Ford #imx6d with CSI2
interface on 4.19.6 and 4.20-RC5
It would be great if this could be applied to 4.19+
adam
> ---
> driver
On Thu, Nov 29, 2018 at 8:49 AM Jacopo Mondi wrote:
>
> The MIPI clock generation tree uses the MIPI_DIV divider to generate both the
> MIPI SCALER CLOCK and the PIXEL_CLOCK. It seems the MIPI BIT CLK frequency is
> generated by either the MIPI SCALER or the PIXEL CLOCK, depending if the
> current
On Thu, Nov 29, 2018 at 8:48 AM Jacopo Mondi wrote:
>
> Hello ov5640-ers,
>these two patches should be applied on top of Maxime's clock tree rework v5
> and 'fix' MIPI CSI-2 clock tree configuration.
>
> The first patch is a fix that appeard in various forms on the list several
> times: if the
On Wed, Nov 14, 2018 at 7:20 AM Adam Ford wrote:
>
> On Tue, Nov 13, 2018 at 7:04 AM Maxime Ripard
> wrote:
> >
> > The clock structure for the PCLK is quite obscure in the documentation, and
> > was hardcoded through the bytes array of each and every mode.
> >
On Fri, Oct 19, 2018 at 7:16 AM Philipp Zabel wrote:
>
> Hi,
>
> this is the fourth version of the i.MX mem2mem scaler series.
>
> An alignment issue with 24-bit RGB formats has been corrected in the
> seam position selection patch and a few new fixes by Steve have been
> added. If there are no mo
ra is talking at 60fps, but my imx6 is only
capturing at 30, but I don't think it's the fault of the ov5640
driver.
Tested-by: Adam Ford #imx6dq
adam
> ---
> drivers/media/i2c/ov5640.c | 366 -
> 1 file changed, 365 insertions(+), 1 d
On Mon, Oct 29, 2018 at 8:49 AM Fabio Estevam wrote:
>
> Hi Adam,
>
> On Sun, Oct 28, 2018 at 3:58 PM Adam Ford wrote:
>
> > Does anyone know when the media branch get's merged into the mainline
> > kernel? I assume we're in the merge window with 4.19 just
On Wed, Oct 24, 2018 at 9:17 AM Adam Ford wrote:
>
> On Wed, Oct 24, 2018 at 9:08 AM jacopo mondi wrote:
> >
> > Hi Adam,
> >
> > On Wed, Oct 24, 2018 at 08:53:41AM -0500, Adam Ford wrote:
> > > On Tue, Oct 23, 2018 at 6:03 PM jacopo mondi wrote:
> >
On Wed, Oct 24, 2018 at 9:08 AM jacopo mondi wrote:
>
> Hi Adam,
>
> On Wed, Oct 24, 2018 at 08:53:41AM -0500, Adam Ford wrote:
> > On Tue, Oct 23, 2018 at 6:03 PM jacopo mondi wrote:
> > >
> > > Hi Adam,
> > >
> > > On Tue, Oct 23, 2018 at
On Tue, Oct 23, 2018 at 6:03 PM jacopo mondi wrote:
>
> Hi Adam,
>
> On Tue, Oct 23, 2018 at 12:54:12PM -0500, Adam Ford wrote:
> > On Tue, Oct 23, 2018 at 12:39 PM Steve Longerbeam
> > wrote:
> > >
> > >
> > > On 10/23/18 10:34 AM, Adam Ford wr
On Tue, Oct 23, 2018 at 12:39 PM Steve Longerbeam
wrote:
>
>
> On 10/23/18 10:34 AM, Adam Ford wrote:
> > On Tue, Oct 23, 2018 at 11:36 AM Steve Longerbeam
> > wrote:
> >> Hi Adam,
> >>
> >> On 10/23/18 8:19 AM, Adam Ford wrote:
> >&
On Tue, Oct 23, 2018 at 11:36 AM Steve Longerbeam
wrote:
>
> Hi Adam,
>
> On 10/23/18 8:19 AM, Adam Ford wrote:
> > On Mon, Oct 22, 2018 at 7:40 AM Fabio Estevam wrote:
> >> Hi Adam,
> >>
> >> On Mon, Oct 22, 2018 at 9:37 AM Adam Ford wrote:
>
On Mon, Oct 22, 2018 at 7:40 AM Fabio Estevam wrote:
>
> Hi Adam,
>
> On Mon, Oct 22, 2018 at 9:37 AM Adam Ford wrote:
>
> > Thank you! This tutorial web site is exactly what I need. The
> > documentation page in Linux touched on the media-ctl links, but it
> >
On Mon, Oct 22, 2018 at 6:33 AM jacopo mondi wrote:
>
> Hi Adam,
>
> On Fri, Oct 19, 2018 at 02:42:56PM -0500, Adam Ford wrote:
> > On Fri, Oct 19, 2018 at 8:45 AM Adam Ford wrote:
> > >
> > > On Wed, Oct 17, 2018 at 3:01 AM jacopo mondi wrote:
> > >
On Fri, Oct 19, 2018 at 8:45 AM Adam Ford wrote:
>
> On Wed, Oct 17, 2018 at 3:01 AM jacopo mondi wrote:
> >
> > Hi Adam, Seve,
> >
> > On Tue, Oct 16, 2018 at 05:13:24PM -0700, Steve Longerbeam wrote:
> > > Hi Adam,
> > >
> > >
> >
On Wed, Oct 17, 2018 at 3:01 AM jacopo mondi wrote:
>
> Hi Adam, Seve,
>
> On Tue, Oct 16, 2018 at 05:13:24PM -0700, Steve Longerbeam wrote:
> > Hi Adam,
> >
> >
> > On 10/16/18 12:46 PM, Adam Ford wrote:
> > >On Thu, Sep 20, 2018 at 9:58
On Thu, Sep 20, 2018 at 9:58 AM jacopo mondi wrote:
>
> Hi imx6 people,
>
> On Thu, May 31, 2018 at 08:39:20PM +0530, Jagan Teki wrote:
> > Hi All,
> >
> > I'm trying to verify MIPI-CSI2 OV5640 camera on i.MX6 platform with
> > Mainline Linux.
>
> Sorry to resurect this, but before diving deep int
From: Adam Ford
By default the camera driver only supports monochrome or color at 12-bit.
This patch will allow the camera to choose between 12-bit or 8-bit resolution.
Tested on Logic PD DM3730 Torpedo Development Kit.
Signed-off-by: Adam Ford
diff --git a/Documentation/devicetree/bindings
I have a Leopard Imaging LI-5M03 camera attached in 8-bit mode, and I
am trying to capture an image on camera and stream it to the LCD
(/dev/fb0) without using the DSP or proprietary codecs.
I was hoping to do it with either gstreamer (preferrably 1.0) or ffpeg.
My board has mainline device tree
36 matches
Mail list logo
