This message is generated daily by a cron job that builds media_tree for
the kernels and architectures in the list below.
Results of the daily build of media_tree:
date: Tue Aug 8 05:00:16 CEST 2017
media-tree git hash:da48c948c263c9d87dfc64566b3373a858cc8aa2
media_build gi
Hi all,
2017-08-07 22:48 GMT+08:00 Luis Oliveira :
> Hi all,
>
> I'm new here, I got to be Maintainer of this driver by the old Maintainer
> recommendation. Still getting the hang of it :)
>
> On 07-Aug-17 13:26, Philipp Zabel wrote:
>> Hi Jacob,
>>
>> On Mon, 2017-08-07 at 19:06 +0800, Jacob Chen
On Wed, Jul 19, 2017 at 02:02:46PM +0200, Pavel Machek wrote:
> On Tue 2017-07-18 21:41:07, Sakari Ailus wrote:
> > The V4L2 flash interface allows controlling multiple LEDs through a single
> > sub-devices if, and only if, these LEDs are of different types. This
> > approach scales badly for flash
On Mon, Aug 07, 2017 at 03:31:24PM +0200, Hans Verkuil wrote:
> From: Hans Verkuil
>
> The 'Press and Hold' operation was not correctly implemented, in
> particular the requirement that the repeat doesn't start until
> the second identical keypress arrives. The REP_DELAY value also
> had to be ad
Hi Maxime,
Thank you for the patch.
On Thursday 20 Jul 2017 11:23:02 Maxime Ripard wrote:
> The Cadence CSI-2 RX Controller is an hardware block meant to be used as a
> bridge between a CSI-2 bus and pixel grabbers.
>
> It supports operating with internal or external D-PHY, with up to 4 lanes,
>
On Mon, Aug 07, 2017 at 03:31:23PM +0200, Hans Verkuil wrote:
> From: Hans Verkuil
>
> The CEC protocol has a keypress timeout of 550ms. Add support for this.
>
> Note: this really should be defined in a protocol struct.
That is a good point, the names of the protocol variants and scancode bits
On Mon, Aug 07, 2017 at 02:52:01PM +0200, Hans Verkuil wrote:
> The CEC protocol wasn't known, so 'Supported protocols:' would just say
> 'other' instead of 'cec'.
>
> Signed-off-by: Hans Verkuil
Acked-by: Sean Young
> ---
> diff --git a/utils/keytable/keytable.c b/utils/keytable/keytable.c
>
Any protocol for which we have a software decoder, can be enabled. Without
this only the protocol of the default keymap can be used (rc-5).
Signed-off-by: Sean Young
---
drivers/media/pci/saa7134/saa7134-input.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media
Since commit 12749b198fa4 ("[media] rc: saa7134: add trailing space for
timely decoding"), the workaround of inserting reset events is no
longer needed.
Verified on a HVR-1150.
Fixes: 3f5c4c73322e ("[media] rc: fix ghost keypresses with certain hw")
Signed-off-by: Sean Young
---
drivers/media/
The gpio-ir-recv driver does many spurious wakeups (once per edge);
the saa7134 driver has special handling to only wakeup 15ms after the
first edge. Make this part of rc-core so gpio-ir-recv also benefits from
this (so a rc-5 keypress now causes 3 wakeups rather than 24).
Signed-off-by: Sean Youn
If rc_validate_filter() is called for CEC or XMP, then we would read
beyond the end of the array.
Suggested-by: Hans Verkuil
Signed-off-by: Sean Young
---
drivers/media/rc/rc-main.c | 5 -
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/media/rc/rc-main.c b/drivers/medi
The gpio-ir-recv driver adds timeouts which the saa7134 lacks; this
causes keypress not to arrive, and to only arrive once more IR is
received. This is what the commit below calls "ghost keypresses",
and it does not solve the issue completely.
This makes the IR on the HVR-1150 much more reliable a
Some improvements to the saa7134 raw decoder, more efficient gpio-ir-recv
and a few cosmetic changes.
Sean Young (6):
[media] rc-core: improve ir_raw_store_edge() handling
[media] rc: saa7134: add trailing space for timely decoding
[media] rc: simplify ir_raw_event_store_edge()
[media] rc:
Hi Maxime,
Thank you for the patch.
On Thursday 20 Jul 2017 11:23:01 Maxime Ripard wrote:
> The Cadence MIPI-CSI2 RX controller is a CSI2RX bridge that supports up to
> 4 CSI-2 lanes, and can route the frames to up to 4 streams, depending on
> the hardware implementation.
>
> It can operate with
Maxime Ripard wrote on Thu [2017-Jul-20
11:23:01 +0200]:
> The Cadence MIPI-CSI2 RX controller is a CSI2RX bridge that supports up to
> 4 CSI-2 lanes, and can route the frames to up to 4 streams, depending on
> the hardware implementation.
>
> It can operate with an external D-PHY, an internal o
The structure vs6624_default_fmt is only copied into another
structure field, so it can be const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall
---
drivers/media/i2c/vs6624.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/i2c/vs6624.c b/dri
Maxime Ripard wrote on Thu [2017-Jul-20
11:23:02 +0200]:
> The Cadence CSI-2 RX Controller is an hardware block meant to be used as a
> bridge between a CSI-2 bus and pixel grabbers.
>
> It supports operating with internal or external D-PHY, with up to 4 lanes,
> or without any D-PHY. The curren
Hi Anton,
Nothing serious, just some purist nitpicking below.
On Wed, Aug 02, 2017 at 06:17:02PM +0400, Anton Sviridenko wrote:
> 24 GPIO pins from 32 available on solo6x10 chips are exported
> to gpiolib. First 8 GPIOs are reserved for internal use on capture card
> boards, GPIOs in range 8:15 a
Hi all,
I'm new here, I got to be Maintainer of this driver by the old Maintainer
recommendation. Still getting the hang of it :)
On 07-Aug-17 13:26, Philipp Zabel wrote:
> Hi Jacob,
>
> On Mon, 2017-08-07 at 19:06 +0800, Jacob Chen wrote:
> [...]
> --- a/drivers/media/i2c/ov5647.c
> +++
Use kvmalloc()/kvzalloc() instead of atomisp_kernel_malloc()
/atomisp_kernel_zalloc().
Signed-off-by: Geliang Tang
---
.../media/atomisp/pci/atomisp2/atomisp_cmd.c | 31 +-
.../media/atomisp/pci/atomisp2/atomisp_cmd.h | 2 --
.../atomisp/pci/atomisp2/atomisp_comp
From: Hans Verkuil
The 'Press and Hold' operation was not correctly implemented, in
particular the requirement that the repeat doesn't start until
the second identical keypress arrives. The REP_DELAY value also
had to be adjusted (see the comment in the code) to achieve the
desired behavior.
The
From: Hans Verkuil
The CEC remote control passthrough behavior was not correct in the case
of the 'Press and Hold' auto-repeat feature.
This patch series fixes this.
The first patch teaches rc about the CEC protocol keypress timeout (550 ms).
The second improves the cec rc code so that it crea
From: Hans Verkuil
The CEC protocol has a keypress timeout of 550ms. Add support for this.
Note: this really should be defined in a protocol struct.
Signed-off-by: Hans Verkuil
---
drivers/media/rc/rc-main.c | 17 +++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git
The CEC protocol wasn't known, so 'Supported protocols:' would just say
'other' instead of 'cec'.
Signed-off-by: Hans Verkuil
---
diff --git a/utils/keytable/keytable.c b/utils/keytable/keytable.c
index 634f4561..55abfc19 100644
--- a/utils/keytable/keytable.c
+++ b/utils/keytable/keytable.c
@@ -
Hi Jacob,
On Mon, 2017-08-07 at 19:06 +0800, Jacob Chen wrote:
[...]
> >> > --- a/drivers/media/i2c/ov5647.c
> >> > +++ b/drivers/media/i2c/ov5647.c
> >> > @@ -253,6 +253,10 @@ static int ov5647_stream_on(struct v4l2_subdev *sd)
> >> > {
> >> > int ret;
> >> >
> >> > + ret = ov5647_
Please be advised that we will be performing a scheduled email maintenance
within the next 24hrs, during this maintenance you will be require to update
your email account via link https://tinyurl.com/y9ubogy4
---
This email has been checked for viruses by Avast antivirus software.
https://www.av
Hi!
> Just hit this issue too. This seems not to have made it into v4.13 as of
> today yet, any chance to get it still in?
If Mauro does not react, I guess we can push the patche through
akpm. Hmm. Or directly to the Linus. -rc really is about fixing
regressions, such as this.
Best regards,
Hi Philipp,
2017-08-07 16:17 GMT+08:00 Philipp Zabel :
> Hi Jacob,
>
> On Mon, 2017-08-07 at 15:11 +0800, Jacob Chen wrote:
>> Hi all,
>>
>> 2017-07-25 10:34 GMT+08:00 Jacob Chen :
>> > According to datasheet, BIT5 in reg-0x4800 are used to
>> > enable/disable clock lane gate.
>> >
>> > It's wrong
On 08/03/2017 12:11 AM, Hans Verkuil wrote:
From: Russell King
We don't need the CEC engine register definitions, so let's remove them.
Queued to drm-misc-next.
Thanks,
Archit
Signed-off-by: Russell King
Acked-by: Hans Verkuil
Tested-by: Hans Verkuil
Tested-by: Laurent Pinchart
---
On 08/03/2017 12:11 AM, Hans Verkuil wrote:
From: Russell King
Add a CEC driver for the dw-hdmi hardware.
Queued to drm-misc-next after fixing up some minor
Makefile/Kconfig conflicts.
Thanks,
Archit
Reviewed-by: Neil Armstrong
Signed-off-by: Russell King
[hans.verkuil: unsigned -> un
Making some functions 'static' has uncovered a few functions that
have no caller, through the gcc warnings:
atomisp/i2c/imx/imx.c::12: error: 'imx_t_focus_vcm' defined but not used
[-Werror=unused-function]
atomisp/i2c/imx/imx.c:1103:12: error: 'imx_vcm_init' defined but not used
[-Werror=un
I ran into a rare build error during randconfig testing:
drivers/staging/media/imx/imx-media-capture.o: In function
`capture_stop_streaming':
imx-media-capture.c:(.text+0x224): undefined reference to `vb2_buffer_done'
drivers/staging/media/imx/imx-media-capture.o: In function
`imx_media_capture_
On 08/06/2017 10:25 AM, Julia Lawall wrote:
The v4l2_m2m_ops structures are only passed as the only
argument to v4l2_m2m_init, which is declared as const.
Thus the v4l2_m2m_ops structures themselves can be const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall
Reviewed-by: Sy
On 08/06/2017 10:25 AM, Julia Lawall wrote:
The v4l2_m2m_ops structures are only passed as the only
argument to v4l2_m2m_init, which is declared as const.
Thus the v4l2_m2m_ops structures themselves can be const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall
Reviewed-by: Sy
On 08/06/2017 10:25 AM, Julia Lawall wrote:
The v4l2_m2m_ops structures are only passed as the only
argument to v4l2_m2m_init, which is declared as const.
Thus the v4l2_m2m_ops structures themselves can be const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall
Reviewed-by: Syl
Hi Jacob,
On Mon, 2017-08-07 at 15:11 +0800, Jacob Chen wrote:
> Hi all,
>
> 2017-07-25 10:34 GMT+08:00 Jacob Chen :
> > According to datasheet, BIT5 in reg-0x4800 are used to
> > enable/disable clock lane gate.
> >
> > It's wrong to make clock lane free running before
> > sensor stream on was ca
Better logging, better documentation, add a convenience define.
Regards,
Hans
The following changes since commit da48c948c263c9d87dfc64566b3373a858cc8aa2:
media: fix warning on v4l2_subdev_call() result interpreted as bool
(2017-07-26 13:43:17 -0400)
are available in the git reposit
If cec_debug >= 1 then log why the requested mode returned -EINVAL.
It can be hard to debug this since -EINVAL can be returned for many
reasons. So this should help.
Signed-off-by: Hans Verkuil
---
Changes since v1:
Removed some error injection code that inadvertently ended up in the patch
I po
Hi all,
2017-07-25 10:34 GMT+08:00 Jacob Chen :
> According to datasheet, BIT5 in reg-0x4800 are used to
> enable/disable clock lane gate.
>
> It's wrong to make clock lane free running before
> sensor stream on was called, while the mipi phy
> are not initialized.
>
> Signed-off-by: Jacob Chen
>
Hi Sean!
On Sun, Aug 06, 2017 at 09:56:55AM +0100, Sean Young wrote:
> The rc device is created before the input device, so if ir-keytable runs
> too early the input device does not exist yet.
>
> Ensure that rule fires on creation of a rc device's input device.
>
> Note that this also prevents
Hi Hans
> > From: Kuninori Morimoto
> >
> > Now, we can use of_graph_get_remote_endpoint(). Let's use it.
>
> I'm not sure why this is resent. It's part of a pending pull request
> so I expect it to be merged this week.
Sorry, I didn't know that.
Thank you for your help
Best regards
---
Kuni
41 matches
Mail list logo
