On 08/21/2013 08:34 AM, Arun Kumar K wrote:
> This patch adds subdev driver for Samsung S5K4E5 raw image sensor.
> Like s5k6a3, it is also another fimc-is firmware controlled
> sensor. This minimal sensor driver doesn't do any I2C communications
> as its done by ISP firmware. It can be updated if n
Hi,
On Tuesday 20 August 2013 07:26 PM, Laurent Pinchart wrote:
Hi Archit,
On Tuesday 20 August 2013 18:46:38 Archit Taneja wrote:
On Tuesday 20 August 2013 05:09 PM, Laurent Pinchart wrote:
+static int vpdma_load_firmware(struct vpdma_data *vpdma)
+{
+ int r;
+ struct device *
Some sensors to be used with fimc-is are exclusively controlled
by the fimc-is firmware. This minimal sensor driver provides
the required info for the firmware to configure the sensors
sitting on I2C bus.
Signed-off-by: Arun Kumar K
Reviewed-by: Sylwester Nawrocki
---
drivers/media/platform/exy
This patch adds subdev driver for Samsung S5K4E5 raw image sensor.
Like s5k6a3, it is also another fimc-is firmware controlled
sensor. This minimal sensor driver doesn't do any I2C communications
as its done by ISP firmware. It can be updated if needed to a
regular sensor driver by adding the I2C c
This patch adds the crucial hardware pipeline control for the
fimc-is driver. All the subdev nodes will call this pipeline
interfaces to reach the hardware. Responsibilities of this module
involves configuring and maintaining the hardware pipeline involving
multiple sub-ips like ISP, DRC, Scalers,
Adds Kconfig and Makefile for exynos5-is driver files.
Signed-off-by: Shaik Ameer Basha
Signed-off-by: Arun Kumar K
Reviewed-by: Sylwester Nawrocki
---
drivers/media/platform/Kconfig |1 +
drivers/media/platform/Makefile|1 +
drivers/media/platform/exynos5-is/Kc
The hardware interface module finally sends the commands to the
FIMC-IS firmware and runs the interrupt handler for getting the
responses.
Signed-off-by: Arun Kumar K
Signed-off-by: Kilyeon Im
Reviewed-by: Sylwester Nawrocki
---
.../media/platform/exynos5-is/fimc-is-interface.c | 810 +++
s5k6a3 sensor has actual pixel resolution of 1408x1402 against
the active resolution 1392x1392. The real resolution is needed
when raw sensor SRGB data is dumped to memory by fimc-lite.
Signed-off-by: Arun Kumar K
Reviewed-by: Sylwester Nawrocki
---
drivers/media/i2c/s5k6a3.c | 19 +++
fimc-is driver takes video data input from the ISP video node
which is added in this patch. This node accepts Bayer input
buffers which is given from the IS sensors.
Signed-off-by: Arun Kumar K
Signed-off-by: Kilyeon Im
Reviewed-by: Sylwester Nawrocki
---
drivers/media/platform/exynos5-is/fimc
This patch adds the register definition file for the fimc-is driver
and also the header file containing the main context for the driver.
Signed-off-by: Arun Kumar K
Signed-off-by: Kilyeon Im
Reviewed-by: Sylwester Nawrocki
---
drivers/media/platform/exynos5-is/fimc-is-regs.h | 105 +++
From: Shaik Ameer Basha
This patch adds support for media device for EXYNOS5 SoCs.
The current media device supports the following ips to connect
through the media controller framework.
* MIPI-CSIS
Support interconnection(subdev interface) between devices
* FIMC-LITE
Support capture interfa
The patch adds the DT binding documentation for Samsung
Exynos5 SoC series imaging subsystem (FIMC-IS).
Signed-off-by: Arun Kumar K
Reviewed-by: Sylwester Nawrocki
---
.../devicetree/bindings/media/exynos5-fimc-is.txt | 46
1 file changed, 46 insertions(+)
create mode 1
The patch series add support for Exynos5 camera subsystem. It
re-uses mipi-csis and fimc-lite from exynos4-is and adds a new
media device and fimc-is device drivers for exynos5.
The media device supports asynchronos subdev registration for the
fimc-is sensors and is tested on top of the patch serie
This driver is for the FIMC-IS IP available in Samsung Exynos5
SoC onwards. This patch adds the core files for the new driver.
Signed-off-by: Arun Kumar K
Signed-off-by: Kilyeon Im
Reviewed-by: Sylwester Nawrocki
---
drivers/media/platform/exynos5-is/fimc-is-core.c | 413 +
FIMC-IS has two hardware scalers named as scaler-codec and
scaler-preview. This patch adds the common code handling the
video nodes and subdevs of both the scalers.
Signed-off-by: Arun Kumar K
Signed-off-by: Kilyeon Im
Reviewed-by: Sylwester Nawrocki
---
drivers/media/platform/exynos5-is/fimc-
Used the generic PHY framework API to create the PHY. For powering on
and powering off the PHY, power_on and power_off ops are used. Once the
MUSB OMAP glue is adapted to the new framework, the suspend and resume
ops of usb phy library will be removed. Also twl4030-usb driver is moved
to drivers/ph
Added a generic PHY framework that provides a set of APIs for the PHY drivers
to create/destroy a PHY and APIs for the PHY users to obtain a reference to
the PHY with or without using phandle.
This framework will be of use only to devices that uses external PHY (PHY
functionality is not embedded w
Used the generic PHY framework API to create the PHY. Now the power off and
power on are done in omap_usb_power_off and omap_usb_power_on respectively.
The omap-usb2 driver is also moved to driver/phy.
However using the old USB PHY library cannot be completely removed
because OTG is intertwined wi
Now that omap-usb2 is adapted to the new generic PHY framework,
*set_suspend* ops can be removed from omap-usb2 driver.
Signed-off-by: Kishon Vijay Abraham I
Acked-by: Felipe Balbi
Reviewed-by: Sylwester Nawrocki
---
drivers/phy/phy-omap-usb2.c | 25 -
1 file changed,
Updated the usb_otg_hs dt data to include the *phy* and *phy-names*
binding in order for the driver to use the new generic PHY framework.
Also updated the Documentation to include the binding information.
The PHY binding information can be found at
Documentation/devicetree/bindings/phy/phy-bindings
The PHY framework uses the phy consumer data populated in platform data in the
case of non-dt boot to return the reference to the PHY when the controller
(PHY consumer) requests for it. So populated the phy consumer data in the
platform
data of twl usb.
Signed-off-by: Kishon Vijay Abraham I
---
Use the generic PHY framework API to get the PHY. The usb_phy_set_resume
and usb_phy_set_suspend is replaced with power_on and
power_off to align with the new PHY framework.
musb->xceiv can't be removed as of now because musb core uses xceiv.state and
xceiv.otg. Once there is a separate state mach
Now that twl4030-usb is adapted to the new generic PHY framework,
*set_suspend* and *phy_init* ops can be removed from twl4030-usb driver.
Signed-off-by: Kishon Vijay Abraham I
Acked-by: Felipe Balbi
Reviewed-by: Sylwester Nawrocki
---
drivers/phy/phy-twl4030-usb.c | 57 ++---
The PHY framework provides a set of APIs for the PHY drivers to
create/destroy a PHY and APIs for the PHY users to obtain a reference to the
PHY with or without using phandle. For dt-boot, the PHY drivers should
also register *PHY provider* with the framework.
PHY drivers should create the PHY by
Hi Sakari,
On Saturday 10 August 2013 15:16:29 Sakari Ailus wrote:
> On Fri, Aug 09, 2013 at 01:34:46AM +0200, Laurent Pinchart wrote:
> > On Friday 19 July 2013 20:55:07 Sakari Ailus wrote:
> > > Do not allow streaming if a pad with MEDIA_PAD_FL_MUST_CONNECT flag is
> > > not connected by an acti
This message is generated daily by a cron job that builds media_tree for
the kernels and architectures in the list below.
Results of the daily build of media_tree:
date: Wed Aug 21 04:00:13 CEST 2013
git branch: test
git hash: bfd22c490bc74f9603ea90c37823036660a313e2
gcc versi
Hello,
Can commit 4aab0398e003ac2effae98ba66a012ed715967ba be added to linux
stable?
Without this patch I get the following error (after unplugging and
reconnecting the dvb-t device):
[ 255.245514] BUG: unable to handle kernel NULL pointer dereference at
0050
[ 255.245705] IP: []
On 08/20/2013 10:03 AM, Andrzej Hajda wrote:
> Driver for Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor
> with embedded SoC ISP.
> The driver exposes the sensor as two V4L2 subdevices:
> - S5K5BAF-CIS - pure CMOS Image Sensor, fixed 1600x1200 format,
> no controls.
> - S5K5BAF-ISP - Image Signal
clk_prepare_enable() may fail, so let's check its return value and propagate it
in the case of error.
Signed-off-by: Fabio Estevam
---
Changes since v5:
- Rebased against latest Kamil's tree
drivers/media/platform/coda.c | 27 ++-
1 file changed, 22 insertions(+), 5 dele
When using devm_ioremap_resource(), we do not need to check the return value of
platform_get_resource(), so just remove it.
Signed-off-by: Fabio Estevam
Acked-by: Philipp Zabel
---
Changes since v5:
- Rebased against latest Kamil's tree
drivers/media/platform/coda.c | 5 -
1 file changed,
Some resources were not being released in the error path and some were released
in the incorrect order.
Signed-off-by: Fabio Estevam
---
Changes since v5:
- Rebased against latest Kamil's tree
drivers/media/platform/coda.c | 43 +--
1 file changed, 29 ins
Hello
Seeing that card=39 worked, and, that the A306 doesnt use the LowPower version
of the XC3028 , HC81 is an expressCard == lowpower
A306 is the PCIe minicard version == not LowPower ,
I decided to clone the HC81 entries in cx23885-video.c, cx23885.h ,
cx23885-cards.c
And intruct it to load
On Tue, Aug 13, 2013 at 06:19:35PM +0900, Inki Dae wrote:
> This patch adds a buffer synchronization framework based on DMA BUF[1]
> and and based on ww-mutexes[2] for lock mechanism.
>
> The purpose of this framework is to provide not only buffer access control
> to CPU and DMA but also easy-to-u
Hi Oliver,
On Monday 12 August 2013 11:01:55 Oliver Neukum wrote:
> On Fri, 2013-08-09 at 15:58 +0200, Laurent Pinchart wrote:
> > > This is necessary to let the new generation of cameras from LiteOn used
> > > in Haswell ULT notebook operate. Otherwise the images will be truncated.
> >
> > Could
Am 20.08.2013 17:31, schrieb Mauro Carvalho Chehab:
> Em Tue, 20 Aug 2013 15:38:57 +0200
> Laurent Pinchart escreveu:
>
>> Hi Mauro,
>>
>> On Sunday 18 August 2013 12:20:08 Mauro Carvalho Chehab wrote:
>>> Em Sun, 18 Aug 2013 13:40:25 +0200 Frank Schäfer escreveu:
Am 17.08.2013 12:51, schrieb
Am 20.08.2013 15:38, schrieb Laurent Pinchart:
> Hi Mauro,
>
> On Sunday 18 August 2013 12:20:08 Mauro Carvalho Chehab wrote:
>> Em Sun, 18 Aug 2013 13:40:25 +0200 Frank Schäfer escreveu:
>>> Am 17.08.2013 12:51, schrieb Guennadi Liakhovetski:
Hi Frank,
As I mentioned on the list, I'm cur
Em Tue, 20 Aug 2013 15:38:57 +0200
Laurent Pinchart escreveu:
> Hi Mauro,
>
> On Sunday 18 August 2013 12:20:08 Mauro Carvalho Chehab wrote:
> > Em Sun, 18 Aug 2013 13:40:25 +0200 Frank Schäfer escreveu:
> > > Am 17.08.2013 12:51, schrieb Guennadi Liakhovetski:
> > > > Hi Frank,
> > > > As I men
On 08/20/2013 12:57 AM, Stephen Warren wrote:
> On 08/19/2013 04:53 PM, Tomasz Figa wrote:
>> On Monday 19 of August 2013 16:30:45 Stephen Warren wrote:
>>> On 08/19/2013 11:25 AM, Sylwester Nawrocki wrote:
On 08/19/2013 03:25 PM, Pawel Moll wrote:
> On Mon, 2013-08-19 at 14:18 +0100, Andr
Hello,
I try from my own application out to grab an image with a ov3640 sensor. For
this I need to understand the media-api and the isp pipeline correctly.
I had problems with the use of media-ctl so I implemented the functionality
into my application and it seems to work fine. Without an error I
Hello
FYI
I digged into the firmware problem a little,
xc3028L-v36.fw gets loaded by default , and the errors are as you saw earlier
forcing the /lib/firmware/xc3028-v27.fw :
[ 3569.941404] xc2028 2-0061: Could not load firmware
/lib/firmware/xc3028-v27.fw
So i searched the original dell
Hi Mauro,
Please pull from my gspca tree for a new webcam driver + misc fixes.
The following changes since commit bfd22c490bc74f9603ea90c37823036660a313e2:
v4l2-common: warning fix (W=1): add a missed function prototype (2013-08-18
10:18:30 -0300)
are available in the git repository at:
Am 20.08.2013 15:21, schrieb Maarten Lankhorst:
Op 20-08-13 11:51, Christian König schreef:
Am 20.08.2013 11:36, schrieb Maarten Lankhorst:
[SNIP]
[SNIP]
+/**
+ * radeon_fence_enable_signaling - enable signalling on fence
+ * @fence: fence
+ *
+ * This function is called with fence_queue lock
Hi Archit,
On Tuesday 20 August 2013 18:46:38 Archit Taneja wrote:
> On Tuesday 20 August 2013 05:09 PM, Laurent Pinchart wrote:
>
>
>
> +static int vpdma_load_firmware(struct vpdma_data *vpdma)
> +{
> +int r;
> +struct device *dev = &vpdma->pdev->dev;
>
Hi,
Thanks, applied.
Regards,
Hans
On 08/20/2013 03:03 PM, Ondrej Zary wrote:
Hello,
this is a new gspca driver for Syntek STK1135 webcams. The code is completely
new, but register values are based on Syntekdriver (stk11xx) by Nicolas VIVIEN
(http://syntekdriver.sourceforge.net).
Only one w
Hi,
On 08/20/2013 03:13 PM, Antonio Ospite wrote:
On Tue, 20 Aug 2013 14:21:22 +0200
Hans de Goede wrote:
Hi,
Thanks for the patch I've added this to my "gspca" tree, and this
will be included in my next pull-request to Mauro for 3.12
Thanks HdG.
It's fine with me to have the patch in 3.
Hi Mauro,
On Sunday 18 August 2013 12:20:08 Mauro Carvalho Chehab wrote:
> Em Sun, 18 Aug 2013 13:40:25 +0200 Frank Schäfer escreveu:
> > Am 17.08.2013 12:51, schrieb Guennadi Liakhovetski:
> > > Hi Frank,
> > > As I mentioned on the list, I'm currently on a holiday, so, replying
> > > briefly.
>
Op 20-08-13 11:51, Christian König schreef:
> Am 20.08.2013 11:36, schrieb Maarten Lankhorst:
> [SNIP]
>
>> [SNIP]
>> +/**
>> + * radeon_fence_enable_signaling - enable signalling on fence
>> + * @fence: fence
>> + *
>> + * This function is called with fence_queue lock held,
Hi Laurent,
On Tuesday 20 August 2013 05:09 PM, Laurent Pinchart wrote:
+static int vpdma_load_firmware(struct vpdma_data *vpdma)
+{
+ int r;
+ struct device *dev = &vpdma->pdev->dev;
+
+ r = request_firmware_nowait(THIS_MODULE, 1,
+ (const char *) VPDMA_FIRMWA
On Tue, 20 Aug 2013 14:21:22 +0200
Hans de Goede wrote:
> Hi,
>
> Thanks for the patch I've added this to my "gspca" tree, and this
> will be included in my next pull-request to Mauro for 3.12
>
Thanks HdG.
It's fine with me to have the patch in 3.12 and then have it picked up
for inclusion i
Hello,
this is a new gspca driver for Syntek STK1135 webcams. The code is completely
new, but register values are based on Syntekdriver (stk11xx) by Nicolas VIVIEN
(http://syntekdriver.sourceforge.net).
Only one webcam type is supported now - vendor 0x174f, device 0x6a31.
It's Asus F5RL laptop fli
On Tuesday 20 August 2013 05:09 PM, Laurent Pinchart wrote:
Hi Archit,
On Wednesday 14 August 2013 16:27:57 Archit Taneja wrote:
On Friday 09 August 2013 03:34 AM, Laurent Pinchart wrote:
On Friday 02 August 2013 19:33:38 Archit Taneja wrote:
The primary function of VPDMA is to move data betw
Hi Sylwester,
On Tue, Aug 20, 2013 at 5:29 PM, Sylwester Nawrocki
wrote:
> Cc: Pawel, Kumar
>
> On 08/16/2013 11:20 AM, Arun Kumar K wrote:
>> From: Shaik Ameer Basha
>>
>> This patch adds support for media device for EXYNOS5 SoCs.
>> The current media device supports the following ips to connec
Hi Jiaquan,
On Thursday 15 August 2013 16:27:43 Su Jiaquan wrote:
> On Sat, Aug 10, 2013 at 1:06 AM, Su Jiaquan wrote:
> > On Fri, Aug 9, 2013 at 5:12 AM, Laurent Pinchart wrote:
> >> On Tuesday 06 August 2013 17:18:14 Su Jiaquan wrote:
> >>> On Mon, Aug 5, 2013 at 5:02 AM, Guennadi Liakhovetski
Hi,
On 08/20/2013 02:20 PM, Hans de Goede wrote:
Hi,
Thanks for the new version I've added this to my "gspca" tree, and this
will be included in my next pull-request to Mauro for 3.12
Ugh, correction. I've reverted this patch since stk1135.h is missing
from the patch, can you please send a v3
Hi,
On Mon, Aug 19, 2013 at 10:58:09AM +0530, Kishon Vijay Abraham I wrote:
> >> So maybe let's stop solving an already solved problem and just state that
> >> you need to explicitly assign device ID to use this framework?
> >
> > Felipe,
> > Can we have it the way I had in my v10 patch series t
Hi,
Thanks for the new version I've added this to my "gspca" tree, and this
will be included in my next pull-request to Mauro for 3.12
Regards,
Hans
On 08/11/2013 09:04 PM, Ondrej Zary wrote:
Hello,
this is a new gspca driver for Syntek STK1135 webcams. The code is completely
new, but regis
Hi,
Thanks for the patch I've added this to my "gspca" tree, and this
will be included in my next pull-request to Mauro for 3.12
Regards,
Hans
On 08/05/2013 10:16 PM, Alexey Khoroshilov wrote:
If v4l2_fh_open() fails in dev_open(), gspca_dev->module left locked.
The patch adds module_put(gspc
Hi,
Thanks for the patch I've added this to my "gspca" tree, and this
will be included in my next pull-request to Mauro for 3.12
Regards,
Hans
On 08/15/2013 12:29 PM, Antonio Ospite wrote:
sd_start() operates on device controls but after the conversion to the
v4l2 control framework in commi
Cc: Pawel, Kumar
On 08/16/2013 11:20 AM, Arun Kumar K wrote:
> The patch adds the DT binding documentation for Samsung
> Exynos5 SoC series imaging subsystem (FIMC-IS).
>
> Signed-off-by: Arun Kumar K
> Reviewed-by: Sylwester Nawrocki
> ---
> .../devicetree/bindings/media/exynos5-fimc-is.txt
Cc: Pawel, Kumar
On 08/16/2013 11:20 AM, Arun Kumar K wrote:
> From: Shaik Ameer Basha
>
> This patch adds support for media device for EXYNOS5 SoCs.
> The current media device supports the following ips to connect
> through the media controller framework.
>
> * MIPI-CSIS
> Support interconne
Hi Archit,
On Wednesday 14 August 2013 16:27:57 Archit Taneja wrote:
> On Friday 09 August 2013 03:34 AM, Laurent Pinchart wrote:
> > On Friday 02 August 2013 19:33:38 Archit Taneja wrote:
> >> The primary function of VPDMA is to move data between external memory and
> >> internal processing modul
Add hwmod data for the VPE IP, this is needed for the IP to be reset during
boot, and control the functional clock when the driver needs it via
pm_runtime apis. Add the corresponding ocp_if struct and add it DRA7XX's
ocp interface list.
Cc: Rajendra Nayak
Cc: Sricharan R
Signed-off-by: Archit Ta
Add support for the de-interlacer block in VPE.
For de-interlacer to work, we need to enable 2 more sets of VPE input ports
which fetch data from the 'last' and 'last to last' fields of the interlaced
video. Apart from that, we need to enable the Motion vector output and input
ports, and also allo
Add a DT node for VPE in dra7.dtsi. This is experimental because we might need
to split the VPE address space a bit more, and also because the IRQ line
described is accessible the IRQ crossbar driver is added for DRA7XX.
Cc: Rajendra Nayak
Cc: Sricharan R
Signed-off-by: Archit Taneja
---
arch/
Create functions which the VPE driver can use to create a VPDMA descriptor and
add it to a VPDMA descriptor list. These functions take a pointer to an existing
list, and append the configuration/data/control descriptor header to the list.
In the case of configuration descriptors, the creation of a
The primary function of VPDMA is to move data between external memory and
internal processing modules(in our case, VPE) that source or sink data. VPDMA is
capable of buffering this data and then delivering the data as demanded to the
modules as programmed. The modules that source or sink data are r
VPE(Video Processing Engine) is an IP found on DRA7xx, this series adds VPE as a
mem to mem v4l2 driver, and VPDMA as a helper library.
The previous revision of the series described VPE in detail, you can have a look
at it here:
http://www.spinics.net/lists/linux-media/msg66518.html
There were a
Hello
I have just putdown my screwdrivers :)
Yes it was three ICs
on the bottom-side , no heatsinks (digital reception, that's why i guess) , is
an AF9013-N1
on the top-side, with a heatsink : CX23885-13Z , PCIe A/V controler
on the top-side, with heat-sink + "radio-isolation" (aluminum box)
Am 20.08.2013 11:36, schrieb Maarten Lankhorst:
[SNIP]
[SNIP]
+/**
+ * radeon_fence_enable_signaling - enable signalling on fence
+ * @fence: fence
+ *
+ * This function is called with fence_queue lock held, and adds a callback
+ * to fence_queue that checks if this fence is signaled, and if so
Su Jiaquan gmail.com> writes:
Hello,
>
> Hi Tom
>
>
> Well, for our practice, we QBUF before STREAMON (not on omap3 isp).
> You can try that and see what happens.
>
> As I check the omap3 code, you sequence maybe OK. Coz there is a
> restart mechanism in the code to restart CCDC hardware aft
Op 20-08-13 10:37, Christian König schreef:
> Am 19.08.2013 21:37, schrieb Maarten Lankhorst:
>> Op 19-08-13 14:35, Christian König schreef:
>>> Am 19.08.2013 12:17, schrieb Maarten Lankhorst:
[SNIP]
@@ -190,25 +225,24 @@ void radeon_fence_process(struct radeon_device
*rdev, int rin
On Tue, Aug 20, 2013 at 2:13 PM, Inki Dae wrote:
>
>
>> -Original Message-
>> From: linux-media-ow...@vger.kernel.org [mailto:linux-media-
>> ow...@vger.kernel.org] On Behalf Of Shaik Ameer Basha
>> Sent: Tuesday, August 20, 2013 5:07 PM
>> To: Inki Dae
>> Cc: Shaik Ameer Basha; LMML; linu
__qbuf_userptr checks whether provided buffer is large enough, and
it returns error without any log.
Signed-off-by: Seung-Woo Kim
Signed-off-by: Heejin Woo
---
drivers/media/v4l2-core/videobuf2-core.c |4
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/drivers/media/v4l2
> -Original Message-
> From: linux-media-ow...@vger.kernel.org [mailto:linux-media-
> ow...@vger.kernel.org] On Behalf Of Shaik Ameer Basha
> Sent: Tuesday, August 20, 2013 5:07 PM
> To: Inki Dae
> Cc: Shaik Ameer Basha; LMML; linux-samsung-...@vger.kernel.org;
> c...@samsung.com; Sylwest
On 08/20/13 10:26, nibble.max wrote:
Hello Hans,
I am the original author of sit2 source code based on the reference code from
silabs.
And we have signed NDA with silabs, it does not allow us to release the source
code to the public.
I donot know it is permited or not when you do decompiling t
Am 19.08.2013 21:37, schrieb Maarten Lankhorst:
Op 19-08-13 14:35, Christian König schreef:
Am 19.08.2013 12:17, schrieb Maarten Lankhorst:
[SNIP]
@@ -190,25 +225,24 @@ void radeon_fence_process(struct radeon_device *rdev, int
ring)
}
} while (atomic64_xchg(&rdev->fence_drv[r
Hello Hans,
I am the original author of sit2 source code based on the reference code from
silabs.
And we have signed NDA with silabs, it does not allow us to release the source
code to the public.
I donot know it is permited or not when you do decompiling the binary code.
What happened between
Hi Inki Dae,
Thanks for the review.
On Mon, Aug 19, 2013 at 6:18 PM, Inki Dae wrote:
> Just quick review.
>
>> -Original Message-
>> From: linux-media-ow...@vger.kernel.org [mailto:linux-media-
>> ow...@vger.kernel.org] On Behalf Of Shaik Ameer Basha
>> Sent: Monday, August 19, 2013 7:5
On Tue, Aug 20, 2013 at 11:57 AM, Hans Verkuil wrote:
> On 08/20/2013 07:43 AM, Shaik Ameer Basha wrote:
>> + linux-media, linux-samsung-soc
>>
>> Hi Hans,
>>
>> Thanks for the review.
>> Will address all your comments in v3.
>>
>> I have only one doubt regarding try_ctrl... (addressed inline)
>>
79 matches
Mail list logo
