On Tue, Aug 14, 2012 at 4:51 PM, Antti Palosaari wrote:
>> There seems to be a small regression on mediatree/for_v3.7-3
>> - dmesg/klog get flooded with these:
>>
>> [201145.140260] dvb_frontend_poll: 15 callbacks suppressed
>> [201145.586405] usb_urb_complete: 88 callbacks suppressed
>> [201150.5
> If you have the time to test it and stamp a "Tested-by" on it, I would
> appreciate it.
>
> Thanks,
>
> Ezequiel
I applied and tested on 3.7.0-rc3 - everything is ok.
Signed patch is bellow.
Signed-off-by: Ezequiel Garcia
Tested-by: Arvydas Sidorenko
---
drivers/media/usb/stkwebcam/stk-
This message is generated daily by a cron job that builds media_tree for
the kernels and architectures in the list below.
Results of the daily build of media_tree:
date:Fri Nov 2 19:00:23 CET 2012
git hash:8f7e91a31fb95c50880c76505b416630c0326d93
gcc version: i686-linux-gcc (GCC
Looks like the iommu framework does not have generic functions
exported for all the needs yet. The hardware specific functions
are defined in files like intel-iommu.h and amd-iommu.h. Follow
the same standard for omap-iommu.h.
This is needed because we are removing plat and mach includes
for ARM c
This file should not be in arch/arm. Move it to drivers/iommu
to allow making most of the header local to drivers/iommu.
This is needed as we are removing plat and mach includes
from drivers for ARM common zImage support.
Cc: Joerg Roedel
Cc: Ohad Ben-Cohen
Cc: Ido Yariv
Cc: Laurent Pinchart
* Tony Lindgren [121030 09:31]:
>
> OK so are people happy with the patches in this series?
>
> Please everybody ack if no more comments so we can move on
> towards getting CONFIG_MULTIPLATFORM to work for omaps.
Looks like Joerg has a new email address, I'll send this
series out one more time.
Thanks Mauro, for pointing out and clarifying. -- Charlie
-Original Message-
From: linux-media-ow...@vger.kernel.org
[mailto:linux-media-ow...@vger.kernel.org] On Behalf Of Mauro Carvalho
Chehab
Sent: Friday, November 02, 2012 5:48 AM
To: Charlie X. Liu
Cc: 'Richard'; linux-media
Hello Steffen,
On Wed, Oct 31, 2012 at 2:58 PM, Steffen Trumtrar
wrote:
> Signed-off-by: Steffen Trumtrar
> ---
> .../devicetree/bindings/video/display-timings.txt | 139 +++
> drivers/of/Kconfig |6 +
> drivers/of/Makefile
On Fri, Nov 02, 2012 at 03:42:21PM +0100, Hans Verkuil wrote:
> Thanks for the ping, I forgot about this patch...
Thanks for the reply. Have to run now - will try to rework it in several
days.
Thanks again,
Kirill
> On Tue October 23 2012 15:35:21 Kirill Smelkov wrote:
> > On Tue, Oct 23, 2012
Thanks Hans and Mauro.
On any of the CX drivers, if we do not have any "maintainer" or "odd fixer",
you could add me to the "odd fixer" list.
Rgds,
Palash
-Original Message-
From: media-workshop-boun...@linuxtv.org
[mailto:media-workshop-boun...@linuxtv.org] On Behalf Of Mauro Carval
Thanks for the ping, I forgot about this patch...
On Tue October 23 2012 15:35:21 Kirill Smelkov wrote:
> On Tue, Oct 23, 2012 at 08:40:04AM +0200, Hans Verkuil wrote:
> > On Mon October 22 2012 19:01:40 Kirill Smelkov wrote:
> > > On Mon, Oct 22, 2012 at 04:16:14PM +0200, Hans Verkuil wrote:
> >
Em Fri, 2 Nov 2012 14:47:49 +0100
Hans Verkuil escreveu:
> On Fri November 2 2012 14:13:10 Mauro Carvalho Chehab wrote:
> > Em Thu, 1 Nov 2012 14:12:44 -0200
> > Mauro Carvalho Chehab escreveu:
> >
> > > Em Thu, 1 Nov 2012 16:44:50 +0100
> > > Hans Verkuil escreveu:
> > >
> > > > On Thu Octob
On Fri, Nov 02, 2012 at 02:48:43PM +0100, Hans Verkuil wrote:
> On Fri November 2 2012 14:10:29 Kirill Smelkov wrote:
> > Hello up there. I was trying to use vivi to generate multiple video streams
> > for
> > my test-lab environment on atom system and noticed it wastes a lot of cpu.
> >
> > Plea
On Tue, Oct 23, 2012 at 05:35:21PM +0400, Kirill Smelkov wrote:
> On Tue, Oct 23, 2012 at 08:40:04AM +0200, Hans Verkuil wrote:
> > On Mon October 22 2012 19:01:40 Kirill Smelkov wrote:
> > > On Mon, Oct 22, 2012 at 04:16:14PM +0200, Hans Verkuil wrote:
> > > > On Mon October 22 2012 15:54:44 Kiril
On Fri November 2 2012 14:10:29 Kirill Smelkov wrote:
> Hello up there. I was trying to use vivi to generate multiple video streams
> for
> my test-lab environment on atom system and noticed it wastes a lot of cpu.
>
> Please apply some optimization patches.
Looks good!
For the whole series:
A
On Fri November 2 2012 14:13:10 Mauro Carvalho Chehab wrote:
> Em Thu, 1 Nov 2012 14:12:44 -0200
> Mauro Carvalho Chehab escreveu:
>
> > Em Thu, 1 Nov 2012 16:44:50 +0100
> > Hans Verkuil escreveu:
> >
> > > On Thu October 25 2012 19:27:01 Mauro Carvalho Chehab wrote:
> > > > Hi Hans,
> > > >
Hi Arvydas,
On Fri, Nov 2, 2012 at 4:35 AM, Arvydas Sidorenko wrote:
>> why the heck do we need this first_init?
>
> first_init was introduced in 7b1c8f58fcdbed75 for turning off LED when
> the cam finishes
> the capture.
> Andrea Anacleto claimed that the change
> broke his webcam
> on the same
This should fix a potential race condition, when the irq handler
triggers while rc_register_device is still setting up the rdev->raw
device.
This crash has not been observed in practice, but there should be a very
small window where it could occur. Since ir_raw_event_store_with_filter
checks if rd
This fixes a problem in fintek-cir and nuvoton-cir where the
irq handler would trigger during module load before the rdev member was
set, causing a NULL pointer crash.
It seems this crash is very reproducible (just bombard the receiver with
IR signals during module load), probably because when req
Before, labels were simply numbered. Now, the labels are named after the
cleanup action they'll perform (first), based on how the winbond-cir
driver does it. This makes the code a bit more clear and makes changes
in the ordering of labels easier to review.
This change is applied only to the rc dri
(Please keep me CC'd, I'm not subscribed to the list)
Hi folks,
I've updated my patches to apply against Mauro's staging/for_v3.8
branch. The patches have only been modified to apply against recent
changes in some of the drivers.
Like before, these patches have been really tested only on nuvoton
Em Thu, 1 Nov 2012 14:12:44 -0200
Mauro Carvalho Chehab escreveu:
> Em Thu, 1 Nov 2012 16:44:50 +0100
> Hans Verkuil escreveu:
>
> > On Thu October 25 2012 19:27:01 Mauro Carvalho Chehab wrote:
> > > Hi Hans,
> > >
> > > Em Mon, 22 Oct 2012 10:35:56 +0200
> > > Hans Verkuil escreveu:
> > >
>
precalculate_line() is not very high on profile, but it calls expensive
gen_twopix(), so let's polish it too:
call gen_twopix() only once for every color bar and then distribute
the result.
before:
# cmdline : /home/kirr/local/perf/bin/perf record -g -a sleep 20
#
# Samples:
The "dev->mvcount % wmax" thing was showing high in profiles (we do it
for each line which ~ 500 per frame)
│ 10c0 :
...
0,39 │ 70:┌─→mov0x3ff4(%edi),%esi
0,22 │ 76:│ mov0x2a0(%edi),%eax
0,30 ││ mov-0x84(%ebp),%ebx
0,35
Though dev->line[] is u8 array we work with it as with u16, u24 or u32
pixels, and also pass it to memcpy() and it's better to align it to at
least 4.
Before the patch, on x86 offsetof(vivi_dev, line) was 1003 and after
patch it is 1004.
There is slight performance increase, but I think is is sli
I've noticed that vivi takes a lot of CPU to produce its frames.
For example for 8 devices and 8 simple programs running, where each
captures YUY2 640x480 and displays it to X via SDL, profile timing is as
follows:
# cmdline : /home/kirr/local/perf/bin/perf record -g -a sleep 20
# Samples
Hello up there. I was trying to use vivi to generate multiple video streams for
my test-lab environment on atom system and noticed it wastes a lot of cpu.
Please apply some optimization patches.
Thanks,
Kirill
Kirill Smelkov (4):
[media] vivi: Optimize gen_text()
[media] vivi: vivi_dev->line
On Fri, Nov 2, 2012 at 9:48 AM, YAMANE Toshiaki wrote:
> fixed below checkpatch warnings.
> - WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then
> pr_err(... to printk(KERN_ERR ...
> - WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then
> pr_info(... to printk(KE
On Fri, Nov 2, 2012 at 1:09 PM, YAMANE Toshiaki wrote:
> fixed below checkpatch warnings.
> - WARNING: Prefer netdev_dbg(netdev, ... then dev_dbg(dev, ... then
> pr_debug(... to printk(KERN_DEBUG ...
> - WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then
> pr_err(... to printk(K
Em Thu, 1 Nov 2012 16:15:41 -0700
"Charlie X. Liu" escreveu:
> You could check or refer to the following links, for start:
>
> http://linuxtv.org/wiki/index.php/Main_Page
> http://www.linuxtv.org/wiki/index.php/LinuxTV_dvb-apps
Be careful with the docs below:
> http://www.linuxtv.org/docs/dvba
On Fri, Nov 2, 2012 at 1:08 PM, YAMANE Toshiaki wrote:
> fixed below checkpatch error.
> - ERROR: that open brace { should be on the previous line
>
> Signed-off-by: YAMANE Toshiaki
Tested-by: Peter Senna Tschudin
> ---
> drivers/staging/media/go7007/wis-ov7640.c |3 +--
> 1 file changed, 1
fixed below checkpatch warnings.
- WARNING: Prefer netdev_dbg(netdev, ... then dev_dbg(dev, ... then
pr_debug(... to printk(KERN_DEBUG ...
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...
to printk(KERN_ERR ...
Signed-off-by: YAMANE Toshiaki
---
drivers/staging/
fixed below checkpatch error.
- ERROR: that open brace { should be on the previous line
Signed-off-by: YAMANE Toshiaki
---
drivers/staging/media/go7007/wis-ov7640.c |3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/staging/media/go7007/wis-ov7640.c
b/drivers/stagi
fixed below checkpatch warnings.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...
to printk(KERN_ERR ...
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then
pr_info(... to printk(KERN_INFO ...
- WARNING: Prefer netdev_warn(netdev, ... then dev_war
> why the heck do we need this first_init?
first_init was introduced in 7b1c8f58fcdbed75 for turning off LED when
the cam finishes
the capture.
Andrea Anacleto claimed that the change
broke his webcam
on the same laptop, so he introduced that variable to fix the issue.
It didn't have any
impact t
35 matches
Mail list logo
