On Fri, 2010-01-08 at 08:55 -0500, Andy Walls wrote:
> On Thu, 2010-01-07 at 10:53 -0500, Devin Heitmueller wrote:
> > On Wed, Jan 6, 2010 at 8:10 PM, Andy Walls wrote:
> > >> I am
> > >> looking to setup a mythtv box in the house - and I am stuck on
> > >> satellite. The only way I can see to
On Fri, Jan 8, 2010 at 8:55 PM, Ralph Siemsen wrote:
> Now the driver loads, and I follow it up with "modprobe tuner".
> Unfortunately, no luck yet using tvtime, it just reports:
> videoinput: No inputs available on video4linux2 device '/dev/video0'.
> But I suspect that is a different issue!
The
On Fri, Jan 08, 2010 at 02:14:59PM -0500, Ralph Siemsen wrote:
>
> I tried replacing only the cx23885.ko driver, as well as installing all
> of the v4l-dvb drivers -- behaviour seemed to be the same. With all
> drivers installed, system bootup does not complete, udev hangs, but I
> see the same k
Signed-off-by: Antonio Ospite
---
Historical note:
This has been re-tested on a reliable machine and it works from guvcview for
all the framerates; on my old PC I am still having problems with 640x...@60fps
_regardless_ of this change, so it must be a USB problem.
Thanks,
Antonio
Index: gs
When capturing with mplayer I have this erros and the bottom of the image is
black.
[mjpeg @ 0xd2f300]error y=29 x=0
[mjpeg @ 0xd2f300]mjpeg_decode_dc: bad vlc: 0:0 (0x2c565b0)
[mjpeg @ 0xd2f300]error dc
[mjpeg @ 0xd2f300]error y=29 x=0
drivers/media/common: Remove unnecessary casts of void *
void pointers do not need to be cast to other pointer types.
Signed-off-by: H Hartley Sweeten
Cc: Michael Hunold
Cc: Mauro Carvalho Chehab
---
drivers/media/common/saa7146_vbi.c |6 +++---
drivers/media/common/saa7146_video.c |
jelle, that you?
Here's the patch against go7007 driver in 2.6.32 kernel (run with -p1).
The main purpose of the patch is to include support for ADS Tech DVD Xpress DX2
usb capture card and make it usable with v4l2-ctl utility.
I also did a general clean-up in a few areas and *temporarily* added
On Fri, Jan 8, 2010 at 2:07 PM, TJ wrote:
> Pete and anybody else out there with go7007 devices, what do you use for
> capture?
>
> Without GO7007 ioctls, I was only able to get vlc to capture in MJPEG format.
Never actually used one myself, but MythTV has support for at least
the Plextor Conver
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Fri Jan 8 19:00:02 CET 2010
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 13879:b6b82258cf5e
gcc version: gcc (
I picked up an HVR-1800 but the box contained an 1850. Encouraged by
other reports of success on this list, I plunged ahead and tried it.
However, the driver oopses during loading, and oddly, after that point
my terminal loses job control (can't ^C or ^Z anymore... weird.)
System is running Fedor
Pete and anybody else out there with go7007 devices, what do you use for
capture?
Without GO7007 ioctls, I was only able to get vlc to capture in MJPEG format.
-TJ
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More
Hi,
At http://linuxtv.org/hg/~jfrancois/gspca/rev/b0a374674388 :
> From: Jean-Francois Moine
>
> Without the delay, the usb_control_msg() may fail when loading the
> page 3 with error -71 or -62.
>
> Priority: normal
>
> Signed-off-by: Jean-Francois Moine
include/asm-generic/errno.h:
> #define
"Hiremath, Vaibhav" writes:
>>
> [Hiremath, Vaibhav] Hi Kevin and Murali,
>
> Sorry for jumping into this discussion so late,
>
> Can we use clk_add_alias() function exported by clkdev.c file here?
> With this board specific file can define aliases for all required
> platform_data keeping CLK()
On Wed, 2010-01-06 at 23:00 -0500, Devin Heitmueller wrote:
> Mauro,
>
> Please PULL from
> http://www.kernellabs.com/hg/~dheitmueller/hvr-1600-alsa-2 for the
> following:
In case it's needed:
Acked-by: Andy Walls
Regards,
Andy
> cx18-alsa: Fix the rates definition and move some buffer freei
On Tue, 05 Jan 2010 21:11:59 +0100, Samuel Rakitničan
wrote:
Hi,
I have an old bt878 based analog card. It's 'Hauppauge WinTV Radio'
model 44914,
rev C121.
I'm trying to workout support for this shipped remote control. I have
tried to add
following lines to bttv-cards.c and bttv-input.c,
Hi
Some customers has problem with quality of DVB-T
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/446575
After this patch http://patchwork.kernel.org/patch/23345/
This is patch for fix regression with DVB-T. Tested with many people.
diff -u ./saa7134.orig/saa7134-core.c ./saa7134/saa713
> -Original Message-
> From: davinci-linux-open-source-boun...@linux.davincidsp.com
> [mailto:davinci-linux-open-source-boun...@linux.davincidsp.com] On
> Behalf Of Karicheri, Muralidharan
> Sent: Friday, January 08, 2010 4:55 AM
> To: Kevin Hilman
> Cc: davinci-linux-open-sou...@linux.dav
Hi,
Please refer to the XCEIVE document.
And set the correct SCODE.
>> 380.912010] xc2028 4-0061: Loading SCODE for >>type=DTV6 QAM DTV7 DTV78
>> (What is this type ???)
>>DTV8 ZARLINK456 SCODE HAS_IF_4760
>>(620003e0), id .
Terry
2010/1/8 Terry Wu :
> Hi,
>
> XCEIVE's do
18 matches
Mail list logo
