> On Mon, 2010-01-04 at 21:27 -0500, Andy Walls wrote:
>> On Mon, 2010-01-04 at 15:27 +1100, Robert Lowery wrote:
>> > > Mauro,
>> > >
>> > > I've split the revert2.diff that I sent you previously to fix the
>> tuning
>> > > regression on my DViCO Dual Digital 4 (rev 1) into three separate
>> patch
On Tue, Jan 5, 2010 at 6:37 PM, Franz Fürbaß wrote:
> Ok, seems to work. I put an usleep(500); between close and open.
> I will try to apply this to MythTV and w_scan as well.
You can certainly try that with w_scan and MythTV to see if it
improves your situation. However, I want to be clear
Mauro,
Please pull from http://linuxtv.org/hg/~awalls/cx18-pvr2100
for the following 2 changesets:
01/02: cx18: Fix tuner reset pin in card entry for the Leadtek PVR2100
http://linuxtv.org/hg/~awalls/cx18-pvr2100?cmd=changeset;node=7cc248252f21
02/02: saa7127: Add support for generating SECAM o
Hi,
Johan wrote:
> I need some guidance on error messages..
>
> The machine receives these messages in the systemlog (dmesg)
>
> [ 7673.168026] dvb-ttpci: StartHWFilter error buf 0b07 0010 07e9 b96a
> ret 0 handle
> [ 7674.192025] dvb-ttpci: StartHWFilter error buf 0b07 0010 07ee b96a
Hi Mitar,
On Tuesday 29 December 2009 17:51:14 Mitar wrote:
> Hi!
>
> > Could be, but I'd like to know if increasing the control streaming
> > timeout is required as well.
>
> I had some time now and have tested it and it is enough just to increase
> UVC_CTRL_STREAMING_TIMEOUT to 5000, I left UV
m-kariche...@ti.com writes:
> From: Muralidharan Karicheri
>
> This combines the two patches sent earlier to change the clock configuration
> and converting ccdc drivers to platform drivers. This has updated comments
> against v2 of these patches. Two new clocks "master" and "slave" are defined
On Tue, Jan 5, 2010 at 7:43 PM, Hemmelig Konto wrote:
> Hi there
>
> I'm the owner of two Terratec Cinergy C PCI HD cards.
>
> I'm running on vanilla kernel 2.6.32.0 x64 and is using the s2-liblianin
> driver.
>
> My problem is that the driver only see 1 of my 2 cards.
> When I investigate the ca
On Tue, 5 Jan 2010, Sean wrote:
> Thanks so much for your help Alan. I also think this is definitely a bug
> in the hardware. Let's leave it at that, I'm happy.
Okay. You should mark the Bugzilla report as REJECTED and close it
out.
Alan Stern
--
To unsubscribe from this list: send the line
Hi,
I have an old bt878 based analog card. It's 'Hauppauge WinTV Radio' model 44914,
rev C121.
I'm trying to workout support for this shipped remote control. I have
tried to add
following lines to bttv-cards.c and bttv-input.c, but that gived
really bad results
(dmesg output is in attachment).
Alan Stern wrote:
On Mon, 4 Jan 2010, Sean wrote:
Alan Stern wrote:
Um, when you say it does the job, what do you mean?
It traps the error and prevents the kernel from crashing.
As did some of the earlier patches, right?
Yes, but this one is good because it works wi
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Tue Jan 5 19:00:02 CET 2010
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 13879:b6b82258cf5e
gcc version: gcc (
Hello Mauro,
Please pull from http://linuxtv.org/hg/~dougsland/autoconf
for the following:
- make_config_compat: make autoconf header compatible for
kernel >= 2.6.33
Cheers,
Douglas
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a messa
On Tue, Jan 5, 2010 at 12:50 PM, Franz Fürbaß wrote:
> Hello,
>
> [1] . Can't scan for DVB-T channels with Hauppauge HVR 4000 HD.
>
> [2] Got a scan problem with the Hauppauge HVR 4000 HD card.
> If I try to scan for channels with the DVB-T frontend
> (/dev/dvb/adapter0/frontend1)
> no lock is gen
Use the %pM kernel extension to display the MAC address.
Signed-off-by: H Hartley Sweeten
Cc: David S. Miller
---
Repost due to merge issues.
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index d533ea5..0a87749 100644
--- a/drivers/media/video/tveeprom.c
+++ b/d
Use the %pM kernel extension to display the MAC address and mask.
The only difference in the output is that the output is shown in
the usual colon-separated hex notation.
Signed-off-by: H Hartley Sweeten
Cc: David S. Miller
---
Repost due to merge issues.
diff --git a/drivers/media/dvb/dvb-c
Use the %pM kernel extension to display the MAC address.
Signed-off-by: H Hartley Sweeten
Cc: Steven Toth
Cc: David S. Miller
---
Repost due to merge issues.
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c
b/drivers/media/video/cx23885/cx23885-dvb.c
index e45d2df..f9243de 100644
---
Hi Mauro,
Please pull from http://linuxtv.org/hg/~jfrancois/v4l-dvb
for the following 9 changesets:
01/09: gspca - vc032x: Fix bad probe of the sensor mi1320.
http://linuxtv.org/hg/~jfrancois/v4l-dvb?cmd=changeset;node=89f9221d4555
02/09: gspca - vc032x: Add the H and V flip controls for sensor
Hi there
I'm the owner of two Terratec Cinergy C PCI HD cards.
I'm running on vanilla kernel 2.6.32.0 x64 and is using the s2-liblianin driver.
My problem is that the driver only see 1 of my 2 cards.
When I investigate the cards, I see that they have a different
subsystem identifiers : 153b:1178
On Mon, 4 Jan 2010, Sean wrote:
> Alan Stern wrote:
> > Um, when you say it does the job, what do you mean?
> It traps the error and prevents the kernel from crashing.
As did some of the earlier patches, right?
> > The job it was _intended_ to do was to prove that your problems are
> > caused by
On Mon, Jan 04, 2010 at 02:40:47PM +0300, Sergey Bolshakov wrote:
> > "Andy" == Andy Walls writes:
>
> > Sergey,
> > On IRC you mentioned a problem of improper detection of SECAM-D/K with
> > the Leadtek PVR2100 (XC2028 and CX23418) from an RF source.
>
> It was some misunderstanding, i s
Hi,
can anybody tell me if the RC support for the "CableStar HD 2" DVB-C
card is supposed to be working? I'm trying the drivers from the
http://linuxtv.org/hg/v4l-dvb repository in combination with the
current Fedora 12 kernel (2.6.31.9-174.fc12.i686.PAE kernel).
I managed to see the registration
On Tue, 5 Jan 2010, Jean Delvare wrote:
> > Trivial patch which adds the __init/__exit macros to the module_init/
> > module_exit functions of
> >
> > drivers/media/dvb/bt8xx/bt878.c
> >
> > Please have a look at the small patch and either pull it through
> > your tree, or please ack' it so Jiri
On Tue, 22 Dec 2009 09:38:14 +0100, peterhu...@gmx.de wrote:
> From: Peter Huewe
>
> Trivial patch which adds the __init/__exit macros to the module_init/
> module_exit functions of
>
> drivers/media/dvb/bt8xx/bt878.c
>
> Please have a look at the small patch and either pull it through
> your t
On Tue, 5 Jan 2010, Kuninori Morimoto wrote:
>
> Dear Guennadi
>
> Thank you for checking patch
>
> > Can you explain a bit why this patch is needed? Apart from a slight
> > stylistic improvement and a saving of 4 bytes of platform data per camera
> > instance? Is it going to be needed for so
Dear Guennadi
Thank you for checking patch
> Can you explain a bit why this patch is needed? Apart from a slight
> stylistic improvement and a saving of 4 bytes of platform data per camera
> instance? Is it going to be needed for some future changes?
This patch is not so important/necessary a
Hello,
a year ago I bought a device named "Hama Video Editor", which was not
(and is not yet) supported by the em28xx driver.
So I played around with the card parameter and got the device basically
working with card=38.
Basically working means, that I had a distortion when capturing old
VHS-Tapes
Hello Morimoto-san
On Tue, 5 Jan 2010, Kuninori Morimoto wrote:
> This patch remove "buswidth" struct member and add new flags for
> ov772x_camera_info.
> And it also modify ap325rxa/migor setup.c
Can you explain a bit why this patch is needed? Apart from a slight
stylistic improvement and a s
27 matches
Mail list logo
