neilsi...@ti.com writes:
> From: Neil Sikka
>
> This has platform and board setup changes to support the vpfe capture
> driver for DM365 EVMs.
>
> Reviewed-by: Muralidharan Karicheri
> Mandatory-Reviewer: Hans Verkuil
> Mandatory-Reviewer: Kevin Hilman
> Signed-off-by: Neil Sikka
Signed-off-
Devin Heitmueller ha scritto:
Hello all,
I have setup a tree that removes the mode switching code when
starting/stopping streaming. If you have one of the em28xx dvb
devices mentioned in the previous thread and volunteered to test,
please try out the following tree:
http://kernellabs.com/hg/~d
Hi Theunis,
Am Donnerstag, den 15.10.2009, 11:25 +0200 schrieb Theunis Potgieter:
> On 14/10/2009, Theunis Potgieter wrote:
> > Hi, what is the procedure to request drivers for specific new, perhaps
> > unknown supported cards?
> >
> > I did have a look at http://www.linuxtv.org/wiki/index.php/
I have a program where I use libv4l's read() emulation for simplicity.
But with most v4l2 webcams I've tried, I get kernel panics.
I have pics of the message if anyone cares to see them, I don't want
to flood the mailing list.
Basically, the names I see in the kernel panic from a uvcvideo card is
On Thursday 15 October 2009 23:11:33 Laurent Pinchart wrote:
> Hi Sakari,
>
> On Wednesday 14 October 2009 19:48:33 Hans Verkuil wrote:
> > On Wednesday 14 October 2009 15:02:14 Sakari Ailus wrote:
> > > Here's the second version of the video events RFC. It's based on Laurent
> > > Pinchart's orig
Hi Sakari,
On Wednesday 14 October 2009 19:48:33 Hans Verkuil wrote:
> On Wednesday 14 October 2009 15:02:14 Sakari Ailus wrote:
> > Here's the second version of the video events RFC. It's based on Laurent
> > Pinchart's original RFC. My aim is to address the issues found in the
> > old RFC during
Hi,
I search a webcam which has a higher framerate than 30fps. I have a
Philips SPC1030NC which should make up to 60 fps when I believe the
package of the camera but luvcview show me a possible framerate of max
30fps...
Is there any usb webcam with a higher framerate than 30fps?
Regards, J
yay
[ 2478.224015] tda9887 4-0043: configure for: Radio Stereo
[ 2478.224017] tda9887 4-0043: writing: b=0xcc c=0x90 e=0x3d
/Magnus
2009/10/15 Magnus Alm :
> Strange, but changeing the tvaudio_addr = 0xb0 to 88, (half of the
> decimal value of b0) made tvaudio find my tda9874.
>
> [ 1186.725140]
writes:
> From: Santiago Nunez-Corrales
>
> This patch provides support for TVP7002 in architecture definitions
> within DM365.
>
> Signed-off-by: Santiago Nunez-Corrales
> ---
> arch/arm/mach-davinci/board-dm365-evm.c | 170
> ++-
> 1 files changed, 166 insertion
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Thu Oct 15 19:00:04 CEST 2009
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 13101:3919b17dc88e
gcc version: gcc
On 14/10/09 21:08, Antti Palosaari wrote:
In my understanding they will start new DVB-T2 standard and due to that
new devices are needed. There is no DVB-T2 devices publicly sold
currently. Few vendors like Pace and Humax have public prototypes.
Basically new demodulator chips are needed and I
On Thursday 15 October 2009 16:43:54 santiago.nu...@ridgerun.com wrote:
> From: Santiago Nunez-Corrales
>
> This patch provides the implementation of the TVP7002 decoder
> driver for DM365.
>
> Signed-off-by: Santiago Nunez-Corrales
> ---
> drivers/media/video/tvp7002.c | 1585
> +
From: Santiago Nunez-Corrales
This patch provides required chip identification definitions
within v4l2. Changed order of THS7353.
Signed-off-by: Santiago Nunez-Corrales
---
include/media/v4l2-chip-ident.h |9 +
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/include/
From: Santiago Nunez-Corrales
This patch provides menu configuration options for the TVP7002
decoder driver in DM365.
Signed-off-by: Santiago Nunez-Corrales
---
drivers/media/video/Kconfig | 32
drivers/media/video/Makefile |2 ++
2 files changed, 34 ins
2009/9/28 Marios Andreopoulos :
> On Monday 28 of September 2009, Devin Heitmueller wrote:
>>
>> Hello Marios,
>>
>> I started doing some debugging em28xx audio on the HVR-950 and hit
>> what is probably the same panic (which occurs as soon as you run the
>> arecord command). I've got a stack dump
Bill Davidsen wrote:
Is this list to promote video on Linux, or just some particular
implementation of it?
a particular implementation
ie. the set of drivers that are developed around the linuxtv.org web
site for inclusion in the linux kernel
Is there a better list, where all competing
hardw
On Thursday 15 October 2009 16:42:52 santiago.nu...@ridgerun.com wrote:
> From: Santiago Nunez-Corrales
>
> This patch provides required chip identification definitions
> within v4l2. Removed HD and control defines.
>
> Signed-off-by: Santiago Nunez-Corrales
> ---
> include/media/v4l2-chip-ide
Hi,
My Nebula DigiTV DVB-T (PCI) card no longer works. It's on a
multi-boot Kubuntu system and works fine when I boot into Intrepid
(v2.6.27-11-generic#1 SMP i686), but it does not work with Jaunty
(2.6.28-11-generic i686). I've also tried a beta of the latest Kubuntu
release Karmic and that also
From: Santiago Nunez-Corrales
This patch provides the implementation of the TVP7002 decoder
driver for DM365.
Signed-off-by: Santiago Nunez-Corrales
---
drivers/media/video/tvp7002.c | 1585 +
1 files changed, 1585 insertions(+), 0 deletions(-)
create m
From: Santiago Nunez-Corrales
This patch provides menu configuration options for the TVP7002
decoder driver in DM365.
Signed-off-by: Santiago Nunez-Corrales
---
drivers/media/video/Kconfig | 32
drivers/media/video/Makefile |2 ++
2 files changed, 34 ins
From: Santiago Nunez-Corrales
This patch provides the required definitions for the TVP7002 driver
in DM365.
Signed-off-by: Santiago Nunez-Corrales
---
drivers/media/video/tvp7002_reg.h | 150 +
include/media/tvp7002.h | 84 +
From: Santiago Nunez-Corrales
This patch adds support for TVP7002 in the DM365 VPFE inteface.
Added video modes.
Signed-off-by: Santiago Nunez-Corrales
---
drivers/media/video/davinci/vpfe_capture.c |9 +
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/drivers/media/
From: Santiago Nunez-Corrales
This patch provides support for TVP7002 in architecture definitions
within DM365.
Signed-off-by: Santiago Nunez-Corrales
---
arch/arm/mach-davinci/board-dm365-evm.c | 170 ++-
1 files changed, 166 insertions(+), 4 deletions(-)
diff --
From: Santiago Nunez-Corrales
This patch provides required chip identification definitions
within v4l2. Removed HD and control defines.
Signed-off-by: Santiago Nunez-Corrales
---
include/media/v4l2-chip-ident.h |6 ++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/inclu
This series of patches provide support for the TVP7002 decoder in DM365.
Support
includes:
* Inclusion of the chip in v4l2 definitions
* Definition in board specific data structures
* Linking within the VPFE architecture
* Definition of TVP7002 specific data structures
* Kconfig and Makefile sup
Hi,
Forgot to mention that this may need a new memory type as well.
Murali Karicheri
Software Design Engineer
Texas Instruments Inc.
Germantown, MD 20874
phone: 301-407-9583
email: m-kariche...@ti.com
>-Original Message-
>From: linux-media-ow...@vger.kernel.org [mailto:linux-media-
>ow..
Hans,
>
>Well, it is definitely not possible to do it in this manner since changing
>the size of struct v4l2_buffer will break the API. Furthermore, something
>like
>this will only work if the DMA engine can handle strides. Is that the case
>for your hardware? I don't think you mentioned what the
On 15/10/09 09:36, Laurent Pinchart wrote:
On Thursday 15 October 2009 10:01:39 Andrea wrote:
Hi,
I read and sometimes post to this mailing list, but I very much prefer to
use a newsreader from gmane rather than receiving all the mails.
In the old linux-dvb mailing list it was possible to sw
On 15/10/2009, H. Langos wrote:
> On Wed, Oct 14, 2009 at 03:07:00PM +0200, Theunis Potgieter wrote:
> > Hi, what is the procedure to request drivers for specific new, perhaps
> > unknown supported cards?
>
>
> The "procedure" is to hit google with something
> like "linux " and see what you fi
On Wed, Oct 14, 2009 at 03:07:00PM +0200, Theunis Potgieter wrote:
> Hi, what is the procedure to request drivers for specific new, perhaps
> unknown supported cards?
The "procedure" is to hit google with something
like "linux " and see what you find. :-)
Especially links to mailing list archiv
On 14/10/2009, Theunis Potgieter wrote:
> Hi, what is the procedure to request drivers for specific new, perhaps
> unknown supported cards?
>
> I did have a look at http://www.linuxtv.org/wiki/index.php/Main_Page
> but it didn't contain any information about supported cards. Neither
> did 2.6.
Andy Walls wrote:
> Right, the windows driver code for the mxl5005s is better. Inform him
> that the linux driver for the mxl5005s could be better. If he has any
> contacts at MaxLinear to get the datasheet and programming manual
> released to me, I can make the linux driver better.
>
We don't h
On Thursday 15 October 2009 10:01:39 Andrea wrote:
> Hi,
>
> I read and sometimes post to this mailing list, but I very much prefer to
> use a newsreader from gmane rather than receiving all the mails.
>
> In the old linux-dvb mailing list it was possible to switch off receiving
> all the email
Hi,
I read and sometimes post to this mailing list, but I very much prefer to use a newsreader from
gmane rather than receiving all the mails.
In the old linux-dvb mailing list it was possible to switch off receiving all
the emails,
is it still possible?
I could not find anything in the docu
I would like to contribute a DVB-T scan file for the transmitter at
Goulburn NSW Australia.
Who is responsible for this?
aF
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel
35 matches
Mail list logo
