Hello Mauro,
Please pull from
http://kernellabs.com/hg/~dheitmueller/em28xx-audio-panic for the
following:
em28xx: fix panic that can occur when starting audio streaming
Since this is a rather nasty kernel panic, we should probably look at
getting this back into stable as well.
Thanks,
Devin
On Wed, Oct 14, 2009 at 11:12 PM, Andy Walls wrote:
> On Wed, 2009-10-14 at 12:01 +0100, Simon Farnsworth wrote:
>> Andy Walls wrote:
>> > Have your remote user read
>> >
>> > http://www.ivtvdriver.org/index.php/Howto:Improve_signal_quality
>> >
>> > and take any actions that seem appropriate/easy
On Wed, 2009-10-14 at 12:01 +0100, Simon Farnsworth wrote:
> Andy Walls wrote:
> > Have your remote user read
> >
> > http://www.ivtvdriver.org/index.php/Howto:Improve_signal_quality
> >
> > and take any actions that seem appropriate/easy.
> >
> I'll try that again - they're grouching, because t
Strange, but changeing the tvaudio_addr = 0xb0 to 88, (half of the
decimal value of b0) made tvaudio find my tda9874.
[ 1186.725140] tvaudio: TV audio decoder + audio/video mux driver
[ 1186.725142] tvaudio: known chips: tda9840, tda9873h, tda9874h/a/ah,
tda9875, tda9850, tda9855, tea6300, tea6320
I'm looking to take advantage of "blind-scan" support in the STV0903
DVB-S/S2 frontend. What does this entail? I'm not seeing anything in
linux/dvb/frontend.h in regards to frontend capabilities and the ability
to do frequency and symbol rate scans.
drivers/media/dvb/dvb-core/dvb_frontend.h
Hi Fabio,
Am Mittwoch, den 14.10.2009, 13:54 + schrieb fabio tirapelle:
> - Messaggio originale -
> > Da: hermann pitton
> > A: fabio tirapelle
>
> > > > > I have installed mythtv on this configuration:
> > > > > Asus M3N78-VM GF8200 RGVSM
> > > > > AMD Ath64 X2LV 3100BOX6000+ 1MB
>
On 10/14/2009 10:12 PM, Andrea wrote:
Hi,
I've read that they are going to start trial for HD DVB on Freeview
http://www.bbc.co.uk/blogs/bbcinternet/2009/06/whats_happening_with_freeview.html
http://www.dtg.org.uk/dtg/press_release.php?id=14
They mention September, October and Decembre 2009,
Hi,
some time ago, I made some improvements and fixed some bugs in the
stv090x and stv6110x frontend drivers. These include:
- increased search range on STV090x based on symbol rate
- fixed some STV090x register definitions and typos
- fix STR and SNR calculation and normalize the value into t
Hi,
I've read that they are going to start trial for HD DVB on Freeview
http://www.bbc.co.uk/blogs/bbcinternet/2009/06/whats_happening_with_freeview.html
http://www.dtg.org.uk/dtg/press_release.php?id=14
They mention September, October and Decembre 2009, does anybody know more
detailed info?
I
Simon Kenyon wrote:
James Peters wrote:
I have followed this one too for a longer time too. In general it
seems like that people were
just fighting the existing and working solution from Marcus. I'm
actually glad that someone is standing
up and trying to make everything easier now. It would be m
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Wed Oct 14 19:00:05 CEST 2009
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 13101:3919b17dc88e
gcc version: gcc
On Wednesday 14 October 2009 15:02:14 Sakari Ailus wrote:
> Hi,
>
>
> Here's the second version of the video events RFC. It's based on Laurent
> Pinchart's original RFC. My aim is to address the issues found in the
> old RFC during the V4L-DVB mini-summit in the Linux plumbers conference
> 200
You guys with more experience could tell me why this strange behavior
with my app.
First of all, I built my app from a code well known in the Video For
Linux spec. It is a capture example.
1º - Why is this /* Buggy driver paranoia. */?
min = fmt.fmt.pix.width * 2;
if (fmt.
On Wed, 14 Oct 2009 12:02:43 -0300
Guilherme Longo wrote:
> Do we need include any other header file than
>
> libv4l2.h
> libv4lconvert.h
>
> to get libv4l working?
>
> I read Hans saying that:
>
> Just replace open("dev/video0", ...) with v4l2_open
> ("dev/video0", ...), ioctl with v4l2_ioc
On Wed, Oct 14, 2009 at 5:42 PM, Simon Kenyon wrote:
> James Peters wrote:
>>
>> I have followed this one too for a longer time too. In general it
>> seems like that people were
>> just fighting the existing and working solution from Marcus. I'm
>> actually glad that someone is standing
>> up and
Em Sun, 11 Oct 2009 08:21:24 -0400
Andy Walls escreveu:
> On Sun, 2009-10-11 at 07:37 -0300, Mauro Carvalho Chehab wrote:
> > Em Sun, 27 Sep 2009 20:12:12 -0400
> > Andy Walls escreveu:
> >
> > > Mauro,
> > >
> > > Please pull from http://linuxtv.org/hg/~awalls/cx23888-ir-part2
> > >
> > > fo
James Peters wrote:
I have followed this one too for a longer time too. In general it
seems like that people were
just fighting the existing and working solution from Marcus. I'm
actually glad that someone is standing
up and trying to make everything easier now. It would be more helpful
if you co
Hi Patrick,
I tried linux-2.6.31.4 and tuning still does not work.
$ tzap $sender -r
status 00 | signal | snr | ber 001f | unc |
status 04 | signal | snr | ber 001f | unc |
status 04 | signal | snr | ber 001f | unc |
status
Em Mon, 12 Oct 2009 22:20:23 +0200
Helmut Auer escreveu:
> Hello List
>
> AFAIK there are different v4l repositories supporting differnet hardware, e.g
> v4l-dvb(missing
> skystar HD), liplianin (missing knc1) etc.
> To add another one, we have a repository supporting the pci-e dual dvb-s low
Do we need include any other header file than
libv4l2.h
libv4lconvert.h
to get libv4l working?
I read Hans saying that:
Just replace open("dev/video0", ...) with v4l2_open("dev/video0", ...),
ioctl with v4l2_ioctl, etc. libv4l2 will then do conversion of any known
(webcam) pixelformats to bg
On Wed, Oct 14, 2009 at 10:30 AM, Mauro Carvalho Chehab
wrote:
> Devin,
>
> You can't simply remove the DVB gpio setup there. It is used when you change
> from analog/digital, when you restore from hibernation and to turn on the
> demod
> on hybrid devices, and to turn it off after stopping DVB.
Em Wed, 14 Oct 2009 10:11:48 -0400
Devin Heitmueller escreveu:
> On Wed, Oct 14, 2009 at 10:06 AM, Giuseppe Borzi wrote:
> > Hello Devin,
> > I did as you suggested. Unplugged the stick reboot and plug it again.
> > And just to be sure I did it two times. Now the device works, but it is
> > unab
On Wed, Oct 14, 2009 at 10:06 AM, Giuseppe Borzi wrote:
> Hello Devin,
> I did as you suggested. Unplugged the stick reboot and plug it again.
> And just to be sure I did it two times. Now the device works, but it is
> unable to change channel. That is to say, when I use the command "vlc
> channel
> Did you run "make unload" before you plugged in the device?
>
> Do me a favor - unplug the device, reboot the PC, plug it back in and
> see if it still happens. I just want to be sure this isn't some sort
> of issue with conflict between the new and old modules before I debug
> this any furthe
- Messaggio originale -
> Da: hermann pitton
> A: fabio tirapelle
> > > > I have installed mythtv on this configuration:
> > > > Asus M3N78-VM GF8200 RGVSM
> > > > AMD Ath64 X2LV 3100BOX6000+ 1MB
> > > > Haupp. WinTV HVR-1100 -t/a PCI
> > > > TechniSat SkyStar 2 DVB-S PCI
> > > > nVidia
Mauro Carvalho Chehab wrote:
have it implemented). This is the case of xc3028, so you'll need to turn off
signal detection while tuning, and be sure that you're loading the proper
frequency
table used on your Country.
It should be noticed that several tuner drivers don't have signal
detecti
Just a little observation,
I am looking for this library because my webcan has a sn9c10x chipset
and I can´t find how sn9c10x pixelformat is captured.
There are a huge list of pixelformats in v4l2 spec but there is just a
reserved word for this format. They say it exist but I can´t find how i
Hi, what is the procedure to request drivers for specific new, perhaps
unknown supported cards?
I did have a look at http://www.linuxtv.org/wiki/index.php/Main_Page
but it didn't contain any information about supported cards. Neither
did 2.6.30 /usr/src/linux/Documentation/dvb/cards.txt for the
fo
Hi, I been searching for a tutorial or a documentation for libv4l to
convert the pixelformat supported by my webcan but I can´t find any.
I found a article saying that I only should open my device using
v4l_open(/dev/video0) instead of open(/dev/video0) and the lib should do
the conversion, bu
On Wed, Oct 14, 2009 at 7:01 AM, Simon Farnsworth
wrote:
> Andy Walls wrote:
>> Have your remote user read
>>
>> http://www.ivtvdriver.org/index.php/Howto:Improve_signal_quality
>>
>> and take any actions that seem appropriate/easy.
>>
> I'll try that again - they're grouching, because their TV is
On Wed, Oct 14, 2009 at 6:25 AM, Giuseppe Borzi wrote:
>> Hello all,
>>
>> I have setup a tree that removes the mode switching code when
>> starting/stopping streaming. If you have one of the em28xx dvb
>> devices mentioned in the previous thread and volunteered to test,
>> please try out the fol
Hi,
Here's the second version of the video events RFC. It's based on Laurent
Pinchart's original RFC. My aim is to address the issues found in the
old RFC during the V4L-DVB mini-summit in the Linux plumbers conference
2009. To get a good grasp of the problem at hand it's probably a good
ide
On Wed, Oct 14, 2009 at 11:48 AM, Simon Kenyon wrote:
> Bill Davidsen wrote:
>>
>> The answer was responsive to the question, a couple of links to software
>> which might serve. I would think your going off about it was further
>> off-topic, it certainly didn't help the O.P. any. When someone ends
Loaded em28xx with i2c_scan and i2c_debug and tvaudio with tda9874a
option and debug.
sudo modprobe -v em28xx i2c_scan=1 i2c_debug=1
sudo modprobe -v tvaudio tda9874a=1 debug=1
And got this ouput:
[91083.588182] em28xx #0: found i2c device @ 0x30 [???]
[91083.590179] em28xx #0: found i2c device
Em Wed, 14 Oct 2009 13:45:22 +
Ali Abdallah escreveu:
> Follow up, i manager to get the hvr 900 instead the 900H, and i got the
> same result with the analog signal, i tried with my friend's windows
> system, same result, no analog channels detected, however i got all the
> channels a hvr
Devin Heitmueller wrote:
On Fri, Oct 9, 2009 at 1:22 PM, Ali Abdallah wrote:
Screenshots here for TV and S-Video input configuration with TV time.
http://ali.blogsite.org/files/tvtime/
Could you try the S-Video or composite input and see if the picture
quality is still bad (as this we
Hello,
On Thursday, October 08, 2009 11:26 PM Karicheri, Muralidharan wrote:
> > Why not? In a typical camera scenario, application can feed one frame and
> > get two output frames (one
> > for storing and another for sending over email (a lower resolution). I just
> > gave an example.
>
> > Y
Andy Walls wrote:
> Have your remote user read
>
> http://www.ivtvdriver.org/index.php/Howto:Improve_signal_quality
>
> and take any actions that seem appropriate/easy.
>
I'll try that again - they're grouching, because their TV is fine, and
the same card in a Windows PC is also fine. It's just
On Wed, 2009-10-14 at 09:54 +0100, Simon Farnsworth wrote:
> Hello,
>
> I'm having problems with glitchy reception on a HVR-1600 card using
> ClearQAM digital cable channels. Unfortunately, I'm remote from the box,
> so can't describe the visual appearance, but I do have SSH access.
>
> Looking a
> Hello all,
>
> I have setup a tree that removes the mode switching code when
> starting/stopping streaming. If you have one of the em28xx dvb
> devices mentioned in the previous thread and volunteered to test,
> please try out the following tree:
>
> http://kernellabs.com/hg/~dheitmueller/em28
Bill Davidsen wrote:
The answer was responsive to the question, a couple of links to software
which might serve. I would think your going off about it was further
off-topic, it certainly didn't help the O.P. any. When someone ends a
question with "please help" I would assume that any answer wou
Hello,
[Code modified a bit to shorten it; removed some error reporting;
irrelevant parts of the code removed.]
diff --git a/drivers/s3cmm/pmm-init.c b/drivers/s3cmm/pmm-init.c
new file mode 100644
index 000..f1e31a5
--- /dev/null
+++ b/drivers/s3cmm/pmm-init.c
@@ -0,0 +1,75 @@
+static unsi
Hi,
On Tue, Oct 13, 2009 at 12:52:08AM -0400, CityK wrote:
> Hi Henrik,
>
> > H. Langos wrote:
> >>
> >> It would be great if it was possible to get (immediate/daily/weekly?)
> >> change
> >> notifications by email in order not to lose track of what is happening to
> >> the pages that I care abo
Hello,
I'm having problems with glitchy reception on a HVR-1600 card using
ClearQAM digital cable channels. Unfortunately, I'm remote from the box,
so can't describe the visual appearance, but I do have SSH access.
Looking at the output of femon -c 100 (attached as femon.txt), I'm
seeing the occa
Alan Stern wrote On 13-10-2009 17:53:
> Can you add a dump_stack() call just after the ehci_err() line in
> drivers/usb/host/ehci-hcd.c:handshake_on_error_set_halt()? It should
> provide some clues.
>
> At the same time (i.e., during the same test) you should collect a
> usbmon trace.
>
> Alan
Hello,
On Monday, October 12, 2009 6:00 PM Russell King wrote:
> Below are some brief comments from having looked through the code. I
> don't intend to suggest that they're anywhere near complete though,
> but are observations I've spotted today.
Thank you for your review!
> On Thu, Oct 01, 20
46 matches
Mail list logo
