On 06/17/2009 03:05 AM, Mauro Carvalho Chehab wrote:
Hi David,
Em Thu, 11 Jun 2009 01:16:13 +0800
David Wong escreveu:
Use unified lgs8gxx frontend instead of reverse engineered lgs8gl5 frontend.
After this patch, lgs8gl5 frontend could be mark as deprecated.
Future development should base
On Tue, 2009-06-23 at 21:10 +0800, Terry Wu wrote:
> 2. Also, I can not find GPIO functions in the cx25840-core.c
>
> Something missing or unfinished ?
Missing: they are not implemented in the cx25840 driver. I will at
least implement a change to the cx25840 module so the v4l bridge driver
(cx
On Tue, 2009-06-23 at 14:33 +0200, Hans Verkuil wrote:
> > On Tue, 2009-06-23 at 11:39 +0800, Terry Wu wrote:
> >> Hi,
> >>
> >> I add the following codes in the cx23885_initialize() of
> >> cx25840-core.c:
> >>/* Drive GPIO2 (GPIO 19~23) direction and values for DVB-T */
> >>cx25840_an
Hi,
Am Mittwoch, den 24.06.2009, 01:36 +1000 schrieb c kuruwita:
> Hi
>
> You could try using the "card=" option when loading the kernel module
> and use the cardnumber of a similar supported saa7134 dvb card.
> you can find a complete list of supported card saa713 dvb cards in
> "Documentation/v
On Tue, 23 Jun 2009, Matthias Schwarzott wrote:
> > On Mon, 2009-06-22 at 16:36 +0200, Matthias Schwarzott wrote:
> > > It seems the path to lsmod tool is hardcoded in the Makefile for
> > > out-of-tree building of v4l-dvb.
> >
> Shouldn't $PATH of root be considered safe? Else the distro or the sy
On Tue, Jun 23, 2009 at 01:10:11PM -0500, Karicheri, Muralidharan wrote:
> I am having to switch between two sub devices that shares the same i2c
> address. First one is TVP5146 and the other is MT9T031. The second has
> a i2c switch and the evm has a data path switch.
You could try Rodolfo Giomet
(apologies if you've received this email twice -- something is strange
with my kernellabs.com email settings -- I will look into this soon)
On Mon, Jun 22, 2009 at 6:51 AM, James Moschou wrote:
> Using dtv1000s tree revision 21a03349f7f9 and a blank modprobe.conf
>
> I can tune to channels but nev
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Tue Jun 23 19:00:04 CEST 2009
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 12132:b362d09e34d4
gcc version: gcc
Hi,
I am having to switch between two sub devices that shares the same i2c address.
First one is TVP5146 and the other is MT9T031. The second has a i2c switch and
the evm has a data path switch. So in our internal release we could switch
capture inputs between the two by configuring the above t
On Tue, 23 Jun 2009, Andy Walls wrote:
On Mon, 2009-06-22 at 10:51 -0500, Theodore Kilgore wrote:
On Mon, 22 Jun 2009, Andy Walls wrote:
On Sun, 2009-06-21 at 22:39 -0500, Theodore Kilgore wrote:
Andy,
You are right. Your camera is emitting JPEG while streaming. I just
succeeded in creat
Hi
You could try using the "card=" option when loading the kernel module
and use the cardnumber of a similar supported saa7134 dvb card.
you can find a complete list of supported card saa713 dvb cards in
"Documentation/video4linux/CARDLIST.saa7134".
Cheers
Chatura
On Sat, May 23, 2009 at 6:42 A
On Tue, Jun 23, 2009 at 12:11 PM, Thomas Kernen wrote:
> Tomer Barletz wrote:
>>
>> On Mon, Jun 1, 2009 at 4:06 PM, Thomas Kernen
>> wrote:
>>>
>>> Dear community,
>>>
>>> After finally getting my Mystique SaTiX DVB-S2 PCI card (clone of KNC1
>>> DVB
>>> Station S2), I'm now facing trouble with th
On 23 June 2009 15:18:38 O&M Ugarcina wrote:
> Thanks for that Igor,
>
> I have just pulled the latest hg and tried to apply patches . Patches
> 12094 and 12095 went in with no problem . However patch 12096 failed
> with this output :
>
> [r...@localhost v4l-dvb]# patch -p1 < 12096.patch
> patching
Mauro,
Thanks.
I have sent a patch yesterday for TVP514x that fixes the comment formatting.
Please review that when you get a chance.
Murali Karicheri
Software Design Engineer
Texas Instruments Inc.
Germantown, MD 20874
Phone : 301-515-3736
email: m-kariche...@ti.com
>-Original Message
Hi,
I am already working on porting MT9T031 driver to sub device framework. I have
communicated this to Guennadi, earlier. So please don't work on it. I am going
to send a patch for review in a week.
Thanks.
Murali Karicheri
Software Design Engineer
Texas Instruments Inc.
Germantown, MD 20874
e
Hello Mauro,
Please pull from
http://www.kernellabs.com/hg/~dheitmueller/em28xx-terratec-zl10353/
for the following bug fix:
- em28xx: Fix tuning for Terratec Cinergy T XS USB (zl10353 version)
Thanks,
Devin
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
--
To unsubscribe fro
Aguirre Rodriguez, Sergio Alberto wrote:
> From: linux-media-ow...@vger.kernel.org [mailto:linux-media-
> ow...@vger.kernel.org] On Behalf Of Aguirre Rodriguez, Sergio Alberto
>> From: Gary Thomas [mailto:g...@mlbassoc.com]
>>> Aguirre Rodriguez, Sergio Alberto wrote:
From: Gary Thomas [mailto
From: linux-media-ow...@vger.kernel.org [mailto:linux-media-
ow...@vger.kernel.org] On Behalf Of Aguirre Rodriguez, Sergio Alberto
> From: Gary Thomas [mailto:g...@mlbassoc.com]
> > Aguirre Rodriguez, Sergio Alberto wrote:
> > > From: Gary Thomas [mailto:g...@mlbassoc.com]
> > >> Aguirre Rodriguez,
> -Original Message-
> From: Gary Thomas [mailto:g...@mlbassoc.com]
> Sent: Tuesday, June 23, 2009 8:23 AM
> To: Aguirre Rodriguez, Sergio Alberto
> Cc: Zach LeRoy; linux-omap; linux-media@vger.kernel.org; Sakari Ailus
> Subject: Re: OMAP34XXCAM: Micron mt9d111 sensor support?
>
> Aguirr
Aguirre Rodriguez, Sergio Alberto wrote:
>> -Original Message-
>> From: Gary Thomas [mailto:g...@mlbassoc.com]
>> Sent: Monday, June 22, 2009 1:06 PM
>> To: Aguirre Rodriguez, Sergio Alberto
>> Cc: Zach LeRoy; linux-omap; linux-media@vger.kernel.org; Sakari Ailus
>> Subject: Re: OMAP34XXCAM
> -Original Message-
> From: Gary Thomas [mailto:g...@mlbassoc.com]
> Sent: Monday, June 22, 2009 1:06 PM
> To: Aguirre Rodriguez, Sergio Alberto
> Cc: Zach LeRoy; linux-omap; linux-media@vger.kernel.org; Sakari Ailus
> Subject: Re: OMAP34XXCAM: Micron mt9d111 sensor support?
>
> Aguirre R
Hi,
1. The CX23885's < GPIO 23 thru 19 - On the cx25840 a/v core> is not
implemented yet.
You can find the following codes in the cx23885-core.c :
/* Mask represents 32 different GPIOs, GPIO's are split into multiple
* registers depending on the board configuration (and whether the
* 417 encoder
> On Tue, 2009-06-23 at 11:39 +0800, Terry Wu wrote:
>> Hi,
>>
>> I add the following codes in the cx23885_initialize() of
>> cx25840-core.c:
>> /* Drive GPIO2 (GPIO 19~23) direction and values for DVB-T */
>> cx25840_and_or(client, 0x160, 0x1d, 0x00);
>> cx25840_write(client, 0
Thanks for that Igor,
I have just pulled the latest hg and tried to apply patches . Patches
12094 and 12095 went in with no problem . However patch 12096 failed
with this output :
[r...@localhost v4l-dvb]# patch -p1 < 12096.patch
patching file linux/drivers/media/common/ir-keymaps.c
Hunk #1 F
Terry Wu a écrit :
Hi,
I add the following codes in the cx23885_initialize() of cx25840-core.c:
/* Drive GPIO2 (GPIO 19~23) direction and values for DVB-T */
cx25840_and_or(client, 0x160, 0x1d, 0x00);
cx25840_write(client, 0x164, 0x00);
Before that, the tuning st
On Tue, 2009-06-23 at 11:39 +0800, Terry Wu wrote:
> Hi,
>
> I add the following codes in the cx23885_initialize() of cx25840-core.c:
> /* Drive GPIO2 (GPIO 19~23) direction and values for DVB-T */
> cx25840_and_or(client, 0x160, 0x1d, 0x00);
> cx25840_write(client, 0x164, 0x
Em Mon, 22 Jun 2009 11:02:58 -0500
"Karicheri, Muralidharan" escreveu:
> Hi,
>
>
> >> >
> >> > -/**
> >> > +/*
> >> > * struct tvp514x_decoder - TVP5146/47 decoder object
> >> > - * @v4l2_int_device: Slave handle
> >> > - * @tvp514x_slave: Slave pointer which is used by @v4l2_int_device
> >>
On Mon, 2009-06-22 at 10:51 -0500, Theodore Kilgore wrote:
>
> On Mon, 22 Jun 2009, Andy Walls wrote:
>
> > On Sun, 2009-06-21 at 22:39 -0500, Theodore Kilgore wrote:
> >> Andy,
> >>
> >> You are right. Your camera is emitting JPEG while streaming. I just
> >> succeeded in creating an image which
On Dienstag, 23. Juni 2009, Theodore Kilgore wrote:
> On Mon, 22 Jun 2009, Andy Walls wrote:
> > On Mon, 2009-06-22 at 16:36 +0200, Matthias Schwarzott wrote:
> >> Hi list!
> >>
> >> It seems the path to lsmod tool is hardcoded in the Makefile for
> >> out-of-tree building of v4l-dvb.
> >> Now at l
Andy Zivkovic wrote:
Are these the same boards and/or different revisions? Are they supported by
the Mantis driver including the CI? This part I wasn't able to confirm from
my search.
Thomas,
The maintis driver currently doesn't support CI. Unfortunately I
bought a Twinhan SP300 (1034) before
On Dienstag, 23. Juni 2009, Trent Piepho wrote:
> On Mon, 22 Jun 2009, Andy Walls wrote:
> > On Mon, 2009-06-22 at 16:36 +0200, Matthias Schwarzott wrote:
> > > Hi list!
> > >
> > > It seems the path to lsmod tool is hardcoded in the Makefile for
> > > out-of-tree building of v4l-dvb.
> > > Now at
On Dienstag, 23. Juni 2009, Andy Walls wrote:
> On Mon, 2009-06-22 at 16:36 +0200, Matthias Schwarzott wrote:
> > Hi list!
> >
> > It seems the path to lsmod tool is hardcoded in the Makefile for
> > out-of-tree building of v4l-dvb.
> > Now at least gentoo has moved lsmod from /sbin to /bin.
> > Ad
32 matches
Mail list logo
