Hi Anders,
Am Freitag, den 15.05.2009, 11:18 +0200 schrieb Anders Eriksson:
>
>
> Success!
>
> I've tracked down the offending change. switch_addr takes on the wrong value
> and setting the LNA fails. Here's a i2c dump:
>
> saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff f
I decided recently to work on support for the SN9C2028 dual-mode cameras,
which are supported as still cameras in libgphoto2/camlibs/sonix. Today, I
succeeded in getting three frames out of one of them, using svv -gr, and I
was able to convert two of the three frames to nice images using the s
> Is Wintv-CI, the Common Interface from Hauppauge, working on linux now ?
not
Goga
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, 15 May 2009, Laurent Pinchart wrote:
> Hi Guillaume,
>
> On Friday 15 May 2009 15:03:11 Guillaume wrote:
[snip]
> > My problem is, after the VIDIOC_S_FMT, the pixelformat field is set back to
> > JPEG FORMAT (and the colorspace too) and so, I don't get raw data, but
> > compressed jpeg
From: Muralidharan Karicheri
Remove outdated driver files from davinci git tree
This has comments incorporated from previous review.
Reviewed By "Hans Verkuil".
Reviewed By "Laurent Pinchart".
Signed-off-by: Muralidharan Karicheri
---
Applies to Davinci GIT Tree
drivers/media/video/ccdc_dav
From: Muralidharan Karicheri
DM644x platform and board setup
This adds plarform and board setup changes required to support
vpfe capture driver on DM644x
This has comments incorporated from previous review.
Reviewed By "Hans Verkuil".
Reviewed By "Laurent Pinchart".
Signed-off-by: Muralidhara
From: Muralidharan Karicheri
DM355 platform and board setup
This has platform and board setup changes to support vpfe capture
driver for DM355 EVMs.
This has comments incorporated from previous review.
Reviewed By "Hans Verkuil".
Reviewed By "Laurent Pinchart".
Signed-off-by: Muralidharan Kar
From: Muralidharan Karicheri
Makefile and config files for the driver
This adds Makefile and Kconfig changes to build vpfe capture driver.
This has comments incorporated from previous review.
Reviewed By "Hans Verkuil".
Reviewed By "Laurent Pinchart".
Signed-off-by: Muralidharan Karicheri
--
From: Muralidharan Karicheri
common types used across CCDC modules
This has the common types used by all ccdc hw modules
This has the comments incorporated from the previous review
Reviewed By "Hans Verkuil".
Reviewed By "Laurent Pinchart".
Signed-off-by: Muralidharan Karicheri
---
Applies t
From: Muralidharan Karicheri
DM644x CCDC hw module
This is the hw module for DM644x CCDC. This registers with the
vpfe capture driver and provides a set of hw_ops to configure
CCDC for a specific decoder device connected to the VPFE
This has the comments incorporated from the previous review
R
From: Muralidharan Karicheri
CCDC hw device header file
Adds ccdc hw device header for vpfe capture driver
This has comments incorporated from previous review.
Reviewed By "Hans Verkuil".
Reviewed By "Laurent Pinchart".
Signed-off-by: Muralidharan Karicheri
---
Applies to v4l-dvb repository
From: Muralidharan Karicheri
VPFE Capture driver for DaVinci Media SOCs :- DM355 and DM6446
These patches add support for VPFE (Video Processing Front End) based
video capture on DM355 and DM6446 EVMs. For more details on the hardware
configuration and capabilities, please refer the vpfe_capture
Hello,
here is the dmesg for the USB tv stick I purchased as Kworld/V-Stream DVB-T310U
DVB-T/Analog-Tuner,USB Stick.
It indeed seems to be from KWorld according to its labelling :-)
Picture works in tvtime. No sound. arecord -l lists no audio capture device
other than my audio chips.
V4L2 us
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Fri May 15 19:00:02 CEST 2009
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 11783:0018ed9bbca3
gcc version: gcc
From: Dean Anderson
Adding V4L2_MODE_HIGHQUALITY feature.
Signed-off-by: Dean Anderson
--- v4l-dvb-0018ed9bbca3/linux/drivers/media/video/s2255drv.c.orig
2009-05-15 10:15:36.0 -0700
+++ v4l-dvb-0018ed9bbca3/linux/drivers/media/video/s2255drv.c 2009-05-15
10:20:43.0 -07
ater, for example for those,
> wishing to test it on i.MX31, otherwise the series will not apply cleanly.
All available at
http://download.open-technology.de/soc-camera/20090515/
As you can see from -base it is still based on next of 20090507, i.e.,
9 days ago:-( If you take a newer
NOT FOR SUBMISSION. Probably, another solution has to be found. soc-camera
drivers need an .init() (marked as "don't use") and a .halt() methods.
Signed-off-by: Guennadi Liakhovetski
---
Hans, you moved s_standby to tuner_ops, and init is not recommended for
new drivers. Suggestions?
include/
Introduce a function similar to v4l2_i2c_new_subdev() but taking a pointer to a
struct i2c_board_info as a parameter instead of a client type and an I2C
address, and make v4l2_i2c_new_subdev() a wrapper around it.
Signed-off-by: Guennadi Liakhovetski
---
Hans, renamed as you requested and update
We will be registering and unregistering the soc_camera_platform platform
device multiple times, therefore we need a .release() method and have to
nullify the kobj.
Signed-off-by: Guennadi Liakhovetski
---
Another one for "sh". Again have to synchronise.
arch/sh/boards/board-ap325rxa.c | 13
Signed-off-by: Guennadi Liakhovetski
---
include/media/soc_camera_platform.h |1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/include/media/soc_camera_platform.h
b/include/media/soc_camera_platform.h
index b144f94..bb70401 100644
--- a/include/media/soc_camera_platform.h
Update ap325rxa to specify .bus_id in struct soc_camera_link explicitly, remove
unused .iface from struct soc_camera_platform_info.
Signed-off-by: Guennadi Liakhovetski
---
Paul, you certainly could take this one, as well as a couple others, but
maybe easier to push them all together.
arch/sh
Add a struct device pointer to struct soc_camera_platform_info and let the user
(ap325rxa) pass it down to soc_camera_platform.c in its .add_device() method.
Signed-off-by: Guennadi Liakhovetski
---
Paul, another mixed one, should be quite easy to review though:-)
arch/sh/boards/board-ap325rxa
Signed-off-by: Guennadi Liakhovetski
---
This is actually a completion to the other single patches I've sent
earlier for various boards. As I said, pcm037 doesn't have all its
outstanding patches in next yet, so, you'll need to collect them from
trees / lists, or get them when I upload them.
soc_camera_platform.c is only used by y SuperH ap325rxa board. This patch
converts soc_camera_platform.c and its users for the soc-camera platform-
device conversion and also extends soc-camera core to handle non-I2C cameras.
Signed-off-by: Guennadi Liakhovetski
---
Paul, may I pull this one ove
Hi all,
this is the next round of soc-camera conversions. Run-tested on i.MX31,
PXA270, SH7722, compile-tested only for i.MX1. It should have been a
"straight-forward" port of the previous version to a more current tree,
but then I started converting soc_camera_platform, and things became a bit
On Thu, 14 May 2009, Randy Dunlap wrote:
Theodore Kilgore wrote:
On Thu, 14 May 2009, Randy Dunlap wrote:
Anyone have any good and clever ideas?
I suggest that you ask on the USB mailing list (linux-...@vger.kernel.org).
It occurs to me that the problem may not be in the command
On Fri, 2009-05-15 at 18:31 +0530, chaithrika wrote:
> Andy,
>
> Thanks for the patch. Please see my response below.
>
> > -Original Message-
> > From: Andy Walls [mailto:awa...@radix.net]
> > Sent: Friday, May 15, 2009 5:24 AM
> > To: david.w...@gatech.edu
> > Cc: Chaithrika U S; linux-m
Hello,
I have cheap Chinese noname card with 8 Philips 7130 chips, without
eeprom. It's dedicated to CCTV. Has no tv tuner, and I don't need sound.
Card looks exacly like http://www.cn-dvr.net/products/enproducts76.html and
AOP-8008A from
http://www.bttv-gallery.de/
I tried modprobe with all p
Hi Erik,
Erik Andrén wrote:
I have searched for some more hardware information than from the vendor
available but in vain (though the cam is about 1 year old already).
I know that especially the video format the webcam delivers would be
important to know for driver development.
If there are any
Laurent Pinchart skynet.be> writes:
> It depends on the camera. If the camera can deliver uncompressed data, you
> should be able to get that out of the driver. Otherwise you're stuck.
>
> [snip]
>
Ok, it's what I was afraid of.
> That probably means that the camera can't deliver uncompre
Hi Guillaume,
On Friday 15 May 2009 15:03:11 Guillaume wrote:
> Hello,
>
> I'm a French student and I'm doing an intern ship in a French image
> processing software company, and I've got some questions about V4L2 and more
> precisely, the video formats.
>
> In the application, I just need to captu
Hello,
I'm a French student and I'm doing an intern ship in a
French image processing software company,
and I've got some questions about V4L2 and more precisely,
the video formats.
In the application, I just need to capture frames
of webcams and display the result.
After research, I found t
Andy,
Thanks for the patch. Please see my response below.
> -Original Message-
> From: Andy Walls [mailto:awa...@radix.net]
> Sent: Friday, May 15, 2009 5:24 AM
> To: david.w...@gatech.edu
> Cc: Chaithrika U S; linux-media@vger.kernel.org
> Subject: Re: v4l-dvb rev 11757 broke building un
I have here more detailed output from dst module:
[9.070205] dst(0) dst_comm_init: Initializing DST.
[9.070273] dst(0) dst_gpio_outb: mask=[], enbb=[0001],
outhigh=[]
[9.072332] dst(0) rdc_reset_state: Resetting state machine
[9.072385] dst(0) dst_gpio_outb: mask=[0002]
Success!
I've tracked down the offending change. switch_addr takes on the wrong value
and setting the LNA fails. Here's a i2c dump:
saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]:
35 matches
Mail list logo
