Re: Kernel 2.4.1 on RHL 6.2

Make sure you have the following symlinks in your /usr/include directory, assuming you're on an x86 machine: asm -> /usr/src/linux/include/asm-i386/ linux -> /usr/src/linux/include/linux/ If you're using a different archetecture, check the /usr/src/linux/include/ directory and make the link with

Re: Kernel 2.4.1 on RHL 6.2

Smoorenburg wrote: > In article <[EMAIL PROTECTED]>, > Stephen "M." Williams <[EMAIL PROTECTED]> wrote: > >Make sure you have the following symlinks in your /usr/include > >directory, assuming you're on an x86 machine: > > > >asm -> /usr/src/linu

Re: IP Alias with 2.2.18?

Marco, Recompile your kernel and select IP: aliasing support under Networking Options Steve On 17 Mar 2001 22:06:44 +0100, Marco Calistri wrote: > My first post on the "top of mailing-list"... > > Is there same IP aliasing support with kernel 2.2.18? > > My eth0:0 doesn't works anym

swap file vs swap partition

there any performance issues with a swap partition vs a swap file. without resizing, i am stuck with the 128mb partition. thanks, -- Robert M. Love [EMAIL PROTECTED] [EMAIL PROTECTED] - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message

sqrt in kernel?

M. Love [EMAIL PROTECTED] [EMAIL PROTECTED] - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/

Re: Background to the argument about CML2 design philosophy

ake oldconfig!). I like your design to abstract away low levels features to a more general design. This makes it easier for the novice, and more intuitive for everyone. But not at the expense of limiting possible cases. -- Robert M. Love [EMAIL PROTECTED] [EMAIL PROTECTED] - To unsubscribe from th

Re: [kbuild-devel] Re: CML2 design philosophy heads-up

ython1 and they just are not going to change on someone's whim. im not installing python2 from source just so i can run some new config utility. (on another note, about the coexist issue: am i going to have a python and python2 binary? so now the config tool will find which to use, ala the kgc

Re: [kbuild-devel] Re: CML2 design philosophy heads-up

On 21 May 2001 02:11:39 -0400, Mike A. Harris wrote: > On 20 May 2001, Robert M. Love wrote: >>(on another note, about the coexist issue: am i going to have a python >>and python2 binary? so now the config tool will find which to use, ala >>the kgcc mess? great) > > For

Re: USB mouse wheel breakage was Re: Linux 2.4.5-ac5

c, but the Maintainer may already realize the problem? -- Robert M. Love [EMAIL PROTECTED] [EMAIL PROTECTED] - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/

Re: USB mouse wheel breakage was Re: Linux 2.4.5-ac5

think not. My mouse is fairly unusable in X, and unfortunately I can not figure out a fix. -- Robert M. Love [EMAIL PROTECTED] [EMAIL PROTECTED] - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More maj

Re: New USB HID driver in -ac series

blem is in the new hid-core.c. See the thread "USB mouse wheel breakage" for more information. I CC the last e-mail to the Maintainer, hopefully he can figure a solution. -- Robert M. Love [EMAIL PROTECTED] [EMAIL PROTECTED] - To unsubscribe from this list: send the line "unsubscr

[PATCH] 2.4.5-ac6: hid-core.c Mouse Wheel Fix

since the merging of the new USB HID code (hid.c -> hid-core.c) in ac4, the mouse wheel has been broken (losing events). this patch, by Micheal <[EMAIL PROTECTED]>, fixes the problem. Alan, please consider applying to the next -ac release. thanks, -- Robert M. Love [EMAIL PROTECTE

Re: A simple question.

ng. note most distributions link /boot/System.map to the correct System.map (in boot) on startup. if your's does not, its a simple script: ln -sf /boot/System.map-`uname -r` /boot/System.map -- Robert M. Love [EMAIL PROTECTED] [EMAIL PROTECTED] - To unsubscribe from this list: send the lin

Max number of posix queues in vanilla kernel (/proc/sys/fs/mqueue/queues_max)

Hi Folks, I have recently ported my multi-process application (like a classical open system) which uses POSIX Queues as IPC to one of the latest Linux kernels, and I have faced issue that number of maximum queues are dramatically limited down to 1024 (see include/linux/ipc_namespace.h, #define HAR

Re: Max number of posix queues in vanilla kernel (/proc/sys/fs/mqueue/queues_max)

Hello! Any comments or concerns about this? many thanks, Madars > Hi Folks, > > I have recently ported my multi-process application (like a classical open > system) which uses POSIX Queues as IPC to one of the latest Linux kernels, > and I have faced issue that number of maximum queues are drama

Re: Max number of posix queues in vanilla kernel (/proc/sys/fs/mqueue/queues_max)

Yes, limiting queue count to the memory sounds correct! Thanks, Madars > On 2/7/2014 3:11 PM, Davidlohr Bueso wrote: >> On Thu, 2014-02-06 at 12:21 +0200, m...@silodev.com wrote: >>> Hi Folks, >>> >>> I have recently ported my multi-process application (

Re: Grant

-- I Mikhail Fridman has selected you specially as one of my beneficiaries for my Charitable Donation. Reply as soon as possible with further directives. Best Regards, Mikhail Fridman.

Re: Financial Aid

-- I Mikhail Fridman. has selected you specially as one of my beneficiaries for my Charitable Donation, Just as I have declared on May 23, 2016 to give my fortune as charity. Reply as soon as possible with further directives. Best Regards, Mikhail Fridman.

Re: Grant-

I Mikhail Fridman. has selected you specially as one of my beneficiaries for my Charitable Donation, Just as I have declared on May 23, 2016 to give my fortune as charity. Check the link below for confirmation: http://www.ibtimes.co.uk/russias-second-wealthiest-man-mikhail-fridman-plans-leaving-1

Re: Grant-

I Mikhail Fridman. has selected you specially as one of my beneficiaries for my Charitable Donation, Just as I have declared on May 23, 2016 to give my fortune as charity. Check the link below for confirmation: http://www.ibtimes.co.uk/russias-second-wealthiest-man-mikhail-fridman-plans-leaving-1

Re: Charity Support

I, Mikhail Fridman have selected you specifically as one of my beneficiaries for my Charitable Donation of $5 Million Dollars, Check the link below for confirmation: https://www.rt.com/business/343781-mikhail-fridman-will-charity/ I await your earliest response for further directives. Best Reg

Re: Grant

I, Mikhail Fridman have selected you specifically as one of my beneficiaries for my Charitable Donation of $5 Million Dollars, Check the link below for confirmation: https://www.rt.com/business/343781-mikhail-fridman-will-charity/ I await your earliest response for further directives. Best Reg

Re: Grant

I Mikhail Fridman. has selected you specially as one of my beneficiaries for my Charitable Donation, Just as I have declared on May 23, 2016 to give my fortune as charity. Check the link below for confirmation: http://www.ibtimes.co.uk/russias-second-wealthiest-man-mikhail-fridman-plans-leaving

Re: Charity Support

I Mikhail Fridman. has selected you specially as one of my beneficiaries for my Charitable Donation, Just as I have declared on May 23, 2016 to give my fortune as charity. Check the link below for confirmation: http://www.ibtimes.co.uk/russias-second-wealthiest-man-mikhail-fridman-plans-leavin

Free Will Offer

I, Mikhail Fridman have selected you specifically as one of my beneficiaries for my Charitable Donation of $5 Million Dollars, Check the link below for confirmation: https://www.rt.com/business/343781-mikhail-fridman-will-charity/ I await your earliest response for further directives. Best

Free Will Offer

I, Mikhail Fridman have selected you specifically as one of my beneficiaries for my Charitable Donation of $5 Million Dollars, Check the link below for confirmation: https://www.rt.com/business/343781-mikhail-fridman-will-charity/ I await your earliest response for further directives. Best

Re: Donation

I, Mikhail Fridman have selected you specifically as one of my beneficiaries for my Charitable Donation of $5 Million Dollars, Check the link below for confirmation: https://www.rt.com/business/343781-mikhail-fridman-will-charity/ I await your earliest response for further directives. Best

Re: Donation-

I, Mikhail Fridman have selected you specifically as one of my beneficiaries for my Charitable Donation of $5 Million Dollars, Check the link below for confirmation: https://www.rt.com/business/343781-mikhail-fridman-will-charity/ I await your earliest response for further directives. Best Reg

Re: Donation-

I, Mikhail Fridman have selected you specifically as one of my beneficiaries for my Charitable Donation of $5 Million Dollars, Check the link below for confirmation: https://www.rt.com/business/343781-mikhail-fridman-will-charity/ I await your earliest response for further directives. Best Reg

Re: Financial Aid

I, Mikhail Fridman have selected you specifically as one of my beneficiaries for my Charitable Donation of $5 Million Dollars, Check the link below for confirmation: https://www.rt.com/business/343781-mikhail-fridman-will-charity/ I await your earliest response for further directives. Best

Re: Donation

I, Mikhail Fridman have selected you specifically as one of my beneficiaries for my Charitable Donation of $5 Million Dollars, Check the link below for confirmation: https://www.rt.com/business/343781-mikhail-fridman-will-charity/ I await your earliest response for further directives. Best

Re: Charity Venture

I, Mikhail Fridman have selected you specifically as one of my beneficiaries for my Charitable Donation of $5 Million Dollars, Check the link below for confirmation: https://www.rt.com/business/343781-mikhail-fridman-will-charity/ I await your earliest response for further directives. Best

Re: Financial Aid

I, Mikhail Fridman have selected you specifically as one of my beneficiaries for my Charitable Donation of $5 Million Dollars, Check the link below for confirmation: https://www.rt.com/business/343781-mikhail-fridman-will-charity/ I await your earliest response for further directives. Best

Re: Financial Aid

I, Mikhail Fridman have selected you specifically as one of my beneficiaries for my Charitable Donation of $5 Million Dollars, Check the link below for confirmation: https://www.rt.com/business/343781-mikhail-fridman-will-charity/ I await your earliest response for further directives. Best

Re: Grant-

I Mikhail Fridman picked you for $5,000,000 donatiion,Reply for more details IZJAVA O ODRICANJU ODGOVORNOSTI: Ova elektronicka posta moze sadrzavati povjerljive informacije i namijenjena je samo osobama na koje je naslovljena. Ukoliko Vi niste navedeni primatelj nije Vam dopusteno koristiti nje

RE: Charity Support

-- I, Mikhail Fridman have selected you specifically as one of my beneficiaries for my Charitable Donation of $5 Million Dollars, Check the link below for confirmation: https://www.rt.com/business/343781-mikhail-fridman-will-charity/ I await your earliest response for further directives.

Re: Grant

-- I, Mikhail Fridman have selected you specifically as one of my beneficiaries for my Charitable Donation of $5 Million Dollars, Check the link below for confirmation: https://www.rt.com/business/343781-mikhail-fridman-will-charity/ I await your earliest response for further directives.

Re: RE: Generous Grant

I Mikhail Fridman. has selected you specially as one of my beneficiaries for my Charitable Donation, Just as I have declared on May 23, 2016 to give my fortune as charity. Check the link below for confirmation: http://www.ibtimes.co.uk/russias-second-wealthiest-man-mikhail-fridman-plans-leaving-1

Re: Grant-

I Mikhail Fridman. has selected you specially as one of my beneficiaries for my Charitable Donation, Just as I have declared on May 23, 2016 to give my fortune as charity. Check the link below for confirmation: http://www.ibtimes.co.uk/russias-second-wealthiest-man-mikhail-fridman-plans-leaving-1

Re: Grant

I Mikhail Fridman. has selected you specially as one of my beneficiaries for my Charitable Donation, Just as I have declared on May 23, 2016 to give my fortune as charity. Check the link below for confirmation: http://www.ibtimes.co.uk/russias-second-wealthiest-man-mikhail-fridman-plans-leaving-1

Re: Grant

I Mikhail Fridman. has selected you specially as one of my beneficiaries for my Charitable Donation, Just as I have declared on May 23, 2016 to give my fortune as charity. Check the link below for confirmation: http://www.ibtimes.co.uk/russias-second-wealthiest-man-mikhail-fridman-plans-leaving-1

Re: Donation

-- I Mikhail Fridman. has selected you specially as one of my beneficiaries for my Charitable Donation, Just as I have declared on May 23, 2016 to give my fortune as charity. Check the link below for confirmation: http://www.ibtimes.co.uk/russias-second-wealthiest-man-mikhail-fridman-plans-l

Re: Donation

I Mikhail Fridman. has selected you specially as one of my beneficiaries for my Charitable Donation, Just as I have declared on May 23, 2016 to give my fortune as charity. Check the link below for confirmation: http://www.ibtimes.co.uk/russias-second-wealthiest-man-mikhail-fridman-plans-leaving-1

Re: [PATCH] zram: Prevent use of unmapped buffer

Good work. The patch fixes a serious bug on 3.6.5, 3.6.6, 3.6.7 and 3.6.8 I hope it gets mainlined ASAP Tomas M slax.org On Tue, Nov 27, 2012 at 8:26 AM, Nitin Gupta wrote: > The commit c8f2f0db1 ("zram: Fix handling of incompressible pages") > introduced a bug which caus

[3.7-rc8 regression] Buffer I/O error on device sda during boot (attempt to access beyond end of device)

Hello, booting vanilla 3.7-rc8 kernel on Acer Aspire 1810TZ yields these errors (I was using 3.6.9-1 and 3.5.5-1 from Debian experimental before without these errors) [9.265058] attempt to access beyond end of device [9.265063] sda1: rw=0, want=968382504, limit=968382503 [9.265066

Re: [3.7-rc8 regression] Buffer I/O error on device sda during boot (attempt to access beyond end of device)

On Mon, Dec 10, 2012 at 12:06 PM, Lekensteyn wrote: > On Monday 10 December 2012 11:42:22 M Z wrote: >> booting vanilla 3.7-rc8 kernel on Acer Aspire 1810TZ yields these >> errors (I was using 3.6.9-1 and 3.5.5-1 from Debian experimental >> before without these errors)

[PATCH] net: cpsw: Add support for wake-on-lan for cpsw

From: Matus Ujhelyi Signed-off-by: Matus Ujhelyi --- drivers/net/ethernet/ti/cpsw.c | 25 + 1 file changed, 25 insertions(+) diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 22a7a43..f59302e 100644 --- a/drivers/net/ethernet/ti/cpsw.c

[PATCHv2] net: cpsw: Add support for wake-on-lan for cpsw

From: Matus Ujhelyi Some phy's can be configured to enable wake on lan (e.g. at803x or marvell 88E1318S). There is no way how to enable wol on CPSW with such connected phys. This patch adds this support. It is provided by calling the phy's related code. Tested on board with at8030x connected ph

[PATCH net-next v3] net: cpsw: Add support for wake-on-lan for cpsw

From: Matus Ujhelyi Some phy's can be configured to enable wake on lan (e.g. at803x or marvell 88E1318S). There is no way how to enable wol on CPSW with such connected phys. This patch adds this support. It is provided by calling the phy's related code. Tested on board with at8030x connected ph

[PATCH net-next v4] net: cpsw: Add support for wake-on-lan for cpsw

From: Matus Ujhelyi Some phy's can be configured to enable wake on lan (e.g. at803x or marvell 88E1318S). There is no way how to enable wol on CPSW with such connected phys. This patch adds this support. It is provided by calling the phy's related code. Tested on board with at8030x connected ph

[ PATCH ] Memory leak fix for bug 57101.

= single_release, }; Regards, Anurup M -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/

RE: [ PATCH ] Memory leak fix for bug 57101.

= seq_release, + .release= single_release, }; Regards, Anurup M -Original Message- From: Lizefan Sent: 2013年4月25日 17:01 To: Anurup m Cc: 'linux-kernel@vger.kernel.org'; shyju pv; Sanil kumar; Nataraj m Subject: Re: [ PATCH ] Memory leak fix for

RE: [ PATCH ] Memory leak fix for bug 57101.

Hi, Please find the Signed-off-by for my patch. Signed-off-by: Anurup m Regards, Anurup M -Original Message- From: Andrew Morton [mailto:a...@linux-foundation.org] Sent: 2013年4月26日 1:59 To: Anurup m Cc: 'linux-kernel@vger.kernel.org'; 'David Howells'; Lizefan; sh

linux/scsi

are there samples of linux codes that can talk to SCSI harddisk, scanners and cameras in the Linux kernel. Like in windows NT, one does not need to write driver for his scsi device. Just use some scsi interface libraries to talk to the scsi device. Is there such examples in linux?.I need to lea

giga ethernet/National Semiconductor dp83820

Does anyone know the status of the alpha driver? Source for the driver is available from vendors, but only compiles on 2.2.x intel. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.o

SANE

Hi, I have a scsi camera of unknown brand and type. No driver. It has CCD chip on it. Can I use SANE as an interface to this camera?. I need to control it using my app that talks to SANE. J _ Get your FREE download of MSN Explorer a

linux 2.2.19pre14 SCSI v5.1.33 patch AIC7895 comments.

Hello Doug, Just to let you know that I've upgraded from linux 2.2.19pre5 to linux 2.2.19pre14 and here is an updated status. 1). My machine is a Dell optiplex 333mhz Intel with a 2940U2W AIC-7895 chipset and SCSI BIOS v1.33S2 (where S means special Dell stuff) 2). This newer patch

linux 2.2.19pre14 is marked as pre13, plus some config/other problems.(fwd)

Alan, See below for a list of problems with the linux 2.2.19pre14 patch. The errors should be apparent. I have a Dell optiplex 333mhz Intel with a 9gig SCSI card. A). The version of the linux 2.2.19pre14 on 2.2.18 is compiling and saying it is pre13. Thus the make fil

Re: linux 2.2.19pre14 is marked as pre13, plus some config/otherproblems. (fwd)

> A). The version of the linux 2.2.19pre14 on 2.2.18 > is compiling and saying it is pre13. Thus the > make file has the wrong version. Yep. Harmless > B). After doing "make menuconfig". The textboxes > displayed for the menu options "Processor family" > and "Maximum Physical m

Re: linux 2.2.19pre14 SCSI v5.1.33 patch AIC7895 comments. (fwd)

-- Forwarded message -- Date: Mon, 26 Feb 2001 17:19:00 -0500 From: Doug Ledford <[EMAIL PROTECTED]> To: M Sweger <[EMAIL PROTECTED]> Subject: Re: linux 2.2.19pre14 SCSI v5.1.33 patch AIC7895 comments. M Sweger wrote: > > Hello Doug, > > Just t

2.4.0 umount problem

I'm running redhat 6.2 halt scripts and strange problem appears when shutting system down with kernel-2.4.0. I get message that "/ device is busy". I've updated util-linux (kill,mount,umount) according to documentation without any success. I've got no problems with 2.2.18. Any ideas? _

Re: 2.4.0 umount problem

>>M T ([EMAIL PROTECTED]) said: I'm running redhat 6.2 halt scripts >>and strange problem appears >>when shutting system down with kernel-2.4.0. >>I get message that "/ >>device is busy". I've updated util-linux >>(kill,mount,umount) &g

[DOS] emulation under linux

Hi, There is a compiler package that runs on DOS but not on Linux. I was wondered how can i emulate DOS under linux so that i run the compile package?. I have kernel 2.2.14-12. RH 6.2. _ Get your FREE download of MSN Explorer at htt

[depmod] question

Hello all, I have kernel verison 2.2.14-12 version with RH6.2. I do "cd /sbin" and i see "depmod" there in the /sbin directory. But somehow seems like load module is not working. Maybe this is the reason why system freezes happen in my RH. A driver for a custom built pci card is not loaded properl

delete object file

Hi, How do i remove an object file. Like if I have a "mparallel.o" file and need to remove and regenerate it. how do i do this if i may ask?. "/lib/modules/misc/mparallel.o". J _ Get your FREE download of MSN Explorer at http://explor

quota and 2.4.0-ac9

When running 'quotaon -a' I get message 'quotaon: using /quota.user on /dev/hdc3: Invalid argument'. This occurs at least with 2.4.0-ac4 and 2.4.0-ac9, but not with 2.4.0. _ Get Your Private, Free E-mail from MSN Hotmail at

Re:test11-pre1 Parport/IMM/Zip Oops fixed -- Are we in Florida?

James M wrote: > >My previously reported Parport/Zip Oops seems to have gone away. I > suspect the SMP race fixs were the culprit...thank you. >However my parport is still misdetected as SPP by the IMM driver when > it is actually set to EPP. This is an Epox/SMP Xeon (400

Parport/IMM/Zip Oops Revisited -- Filesys problem? Viro please look

James M wrote: Was just trying to find out why I can mount in 11pre1 and 11pre2 when Gert can't mount at all, so I removed my VFAT factory formatted zipdisk and put in an Ext2 formatted one.**BOOM** Al, my original oops report is here: http://boudicca.tux.org/hypermail/linux-k

Re: Parport/IMM/Zip Oops Revisited -- Filesys problem? Viro pleaselook

Gert Wollny wrote: > > Actually i never tried to mount in my testings, just did "modprobe imm". I > did not even load sd.o, which reads the size of the medium. Output after > successfull modprobe: > kernel: imm: Version 2.04 (for Linux 2.4.0) > kernel: imm_connect 1 > kernel: imm: Found device at

Re: Parport/IMM/Zip Oops Revisited -- Winbond

Gert Wollny wrote: > > On Tue, 14 Nov 2000, James M wrote: > >Was just trying to find out why I can mount in 11pre1 and 11pre2 when > > Gert can't mount at all, so I removed my VFAT factory formatted zipdisk > > and put in an Ext2 formatted one.**BOOM** &

JIT/JRE

Hi, I have a redhat 7.0 and I need to compile some codes. I need to use JIT (just in time) compiler and JRE on this redhat box. How do i know if have these on my system?. Or the installl CD for the RH7.0 may have it... J _ G

Re: BUG Report 2.4.0-test11-pre3: NMI Watchdoch detected LOCKUP atCPU[01]

// I don't know off top of my head if Zip250 can use ECP or not // Zip100 is EPP at best Imm driver reports Zip100 at 101 MB ECP/EPP setting in Bios yields SPP for Zip100. 1284 spec says you should be able to set mode 100 to get EPP and even tho it's a M$ extension most chipsets should su

New CD-R high capacity drive specs are coming. (fwd)

Hi, See the article below. I just read that the specs are out for three different types of CD-R drives in terms of disk capacity and speeds from Constellation 3D,and it is heading towards manufacturing. It's great for movies and coporate archiving, but was degraded for the consumer market --

ramdisk driver source code

Hi, Anyone know where i can find a copy of ramdisk dirver source code?. JM _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http

oops program

Hi, Does anyone know what is the exact download path to oops program as brought up in "linux device drivers" by Rubini published by O'reilly?. J _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. S

Re:test11-pre1 - Parport/IMM/Zip Oops fixed

My previously reported Parport/Zip Oops seems to have gone away. I suspect the SMP race fixs were the culprit...thank you. However my parport is still misdetected as SPP by the IMM driver when it is actually set to EPP. This is an Epox/SMP Xeon (400 mhz), EP-GXB-M with an Award Bios and

changelog

hi all, Sorry, but i could not find a more appropriate group list to post this on. my fault in anyways. I like to keep track of what is installed after each RPM or any other install command is performed. Like dates inatlled and who installed it, Like create a log of changes,... what is th

linux 2.2.18 inconsistencies/problems (minor)

Hello all/alan, I've got linux 2.2.18 (the latest) compiled and running on a Dell 333mhz optiplex GX1. It was compiled using egcs v1.1.2 with libc6 v2.0.7. Now that USB support is being added, I'm trying to get it working on this UMSDOS kernel version. Here is a list of the pro

linux 2.2.19pre1 a problem with APM and powering off

Hello, In linux 2.2.16 the poweroff command shutoff power to my Dell Optiplex GX1 333mhz without problem. The kernel compile options were CONFIG_APM_REAL_MODE_POWER_OFF=y CONFIG_SMP=y Shortly after 2.2.16 fixes were implemented for SMP support, and ever since then I've had

linux 2.2.19pre1 oops on cpuid

Hi, I have linux 2.2.19pre1 and have compiled the cpuid as a module. The kernel will oops if the cpuid module isn't loaded and one does /cat/dev/cpu/0/cpuid or /cat/dev/cpu/1/cpuid. Question: Is it possible to update the ksymoops utility to a newer version vs. the one supplied whic

Re: linux 2.2.19pre1 oops on cpuid (fwd)

-- Forwarded message -- Date: Wed, 20 Dec 2000 15:56:38 -0500 (EST) From: Alan Cox <[EMAIL PROTECTED]> To: M Sweger <[EMAIL PROTECTED]> Cc: [EMAIL PROTECTED] Subject: Re: linux 2.2.19pre1 oops on cpuid (fwd) > How would I activate the usb-serial in such a way as

system freeze question

hi, there are times when newly installed driver just freezes the RH6.2 and mouse cursor is rock solid frozen. ALT+PRTScreen+... does not work. I now for fact that ALT+PRT... works because i tested it. Anything else can be done to reboot the system graciously than "reset"?. Any advice.. J

login script Q, did not work!!

Included it in the rc.local file as you told me but it did not work. I still had to go to "/dir1/drv" and do "su [password for root]" and then type "./upload", exit. Maybe some little script that can do this in the "bash_profile" or I am not familiar with scripting... This is a custom drive

linux 2.2.19pre5 /proc problem.

Alan, I have linux 2.2.19pre5 on a UMSDOS based Dell Optiplex Gx1 using libc5 v2.0.7. Below is my "lsmod" of all modules loaded. Note: the cpuid module when it isn'tloaded and oopsing the kernel is fixed now. However, I found a new problem in /proc. A). Problem: If you "cat /proc/sys/net/

trying to make boot disk

Hi, I have installed my linux, redhat. I do not have boot disk. How do i make boot floppy disk from the already installed linux on my harddrive?. Thanx, jm _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotma

linux recovery

hi, I made a mistake and can not boot from C: drive anymore. I boot from floppy and go into "linux recovery" mode and it gives the shx# prompt. How do i recover the C: to boot by using the floppy in rescue mode?. Like in Redhat,.. jm _

Re: lockup with parport_pc on 2.4.0-test10-pre1]

Kernel test10-pre2, Dual Xeon PII(400 mhz), Mandrake 7.1, microde updates enabled Mounting my zipdrive(IMM) will result in something like this: Sysrq does not work, machine is completely dead after 20-40 seconds.The usual progession is CPU's lockup, modprobe dies, kflushed and syslogd follow shor

Menuconfig has encountered a possible error...

Hello, if you want more informations, send me a mail or an icq msg. bye, Mat (ICQ# 23832402). === Menuconfig has encountered a possible error in one of the kernel's configuration files and is unable to continue. Here is the error report: Q>

Not just RealTek 8139/dhcpcd..epic100 broken also

15:44:24 windeath kernel: eth0: Transmit timeout using MII device, Tx status 0003. Followed by more of the same except with status 000b. Unlike the realtek errors a network stop/start/restart doesn't help. Looking at the patch for 2.4.4 shows one tiny change to epic100. -- James M. aka

Feature Request Into Kernel - Savage DRM to be added as a selectable DRM module in the kernel

Hi, i would like to request the savage drm listed here; --> http://dri.freedesktop.org/wiki/S3Savage I was hopeing that it could be added as a selectable DRM module in the kernel such as the ati rage and such are. This is a tested driver, proven working for most, making it selectable in the kernel

[PATCH 00/23] drm: introduce drm_zalloc

Hello, As there are many places in drm code where drm_alloc + memset is used this patch series introduces drm_zalloc and also makes use of drm_calloc where needed. Most of these patches save some bytes so the benefit is a few kB saved (gcc 4.1.2) with patch applied. Also some small (style,

[PATCH 01/23] introduce drm_zalloc as a drm_alloc + memset replacement

Add drm_zalloc(). Signed-off-by: Mariusz Kozlowski <[EMAIL PROTECTED]> drivers/char/drm/drmP.h |7 +++ drivers/char/drm/drm_memory_debug.h | 17 ++--- 2 files changed, 21 insertions(+), 3 deletions(-) --- linux-2.6.23-rc3-mm1.orig/drivers/char/drm/drmP.h +++ li

[PATCH 02/23] drm_agpsupport.c: drm_alloc + memset to drm_zalloc

Signed-off-by: Mariusz Kozlowski <[EMAIL PROTECTED]> drivers/char/drm/drm_agpsupport.c | 13896 -> 13828 (-68 bytes) drivers/char/drm/drm_agpsupport.o | 120046 -> 119814 (-232 bytes) drivers/char/drm/drm_agpsupport.c | 13 +++-- 1 file changed, 7 insertions(+), 6 deletions(-) --- lin

[PATCH 03/23] drm_auth.c: drm_alloc + memset to drm_zalloc

Signed-off-by: Mariusz Kozlowski <[EMAIL PROTECTED]> drivers/char/drm/drm_auth.c | 5835 -> 5802 (-33 bytes) drivers/char/drm/drm_auth.o | 104968 -> 104860 (-108 bytes) drivers/char/drm/drm_auth.c |5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) --- linux-2.6.23-rc3-mm1.orig/drive

[PATCH 04/23] drm_bufs.c: drm_alloc + memset to drm_alloc

This patch does dma_alloc and memset conversion to drm_zalloc or drm_calloc. Signed-off-by: Mariusz Kozlowski <[EMAIL PROTECTED]> drivers/char/drm/drm_bufs.c | 44959 -> 44420 (-539 bytes) drivers/char/drm/drm_bufs.o | 149686 -> 146822 (-2864 bytes) drivers/char/drm/drm_bufs.c | 31 +

[PATCH 05/23] drm_dma.c: drm_alloc + memset to drm_zalloc

This patch does the conversion of drm_alloc + memset to drm_zalloc. The memset in loop is also superfluous and can be removed. Signed-off-by: Mariusz Kozlowski <[EMAIL PROTECTED]> drivers/char/drm/drm_dma.c | 4624 -> 4475 (-149 bytes) drivers/char/drm/drm_dma.o | 104277 -> 103917 (-360 bytes)

[PATCH 06/23] drm_drawable.c: drm_calloc to drm_zalloc

Signed-off-by: Mariusz Kozlowski <[EMAIL PROTECTED]> drivers/char/drm/drm_drawable.c | 5425 -> 5422 (-3 bytes) drivers/char/drm/drm_drawable.o | 108201 -> 107765 (-436 bytes) drivers/char/drm/drm_drawable.c |2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- linux-2.6.23-rc3-mm1.orig

[PATCH 07/23] drm_fops.c: drm_alloc + memset to drm_zalloc

Signed-off-by: Mariusz Kozlowski <[EMAIL PROTECTED]> drivers/char/drm/drm_fops.c | 11849 -> 11817 (-32 bytes) drivers/char/drm/drm_fops.o | 115963 -> 115177 (-786 bytes) drivers/char/drm/drm_fops.c |3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) --- linux-2.6.23-rc3-mm1.orig/driver

[PATCH 08/23] drm_irq.c: drm_alloc + memset to drm_zalloc

Signed-off-by: Mariusz Kozlowski <[EMAIL PROTECTED]> drivers/char/drm/drm_irq.c | 13062 -> 13003 (-59 bytes) drivers/char/drm/drm_irq.o | 114446 -> 114298 (-148 bytes) drivers/char/drm/drm_irq.c |8 ++-- 1 file changed, 2 insertions(+), 6 deletions(-) --- linux-2.6.23-rc3-mm1.orig/dri

[PATCH 09/23] drm_scatter.c: drm_alloc + memset to drm_alloc

Signed-off-by: Mariusz Kozlowski <[EMAIL PROTECTED]> drivers/char/drm/drm_scatter.c | 6113 -> 5945 (-168 bytes) drivers/char/drm/drm_scatter.o | 105552 -> 105584 (+32 bytes) drivers/char/drm/drm_scatter.c | 11 +++ 1 file changed, 3 insertions(+), 8 deletions(-) --- linux-2.6.23-rc3

  1   2   3   4   5   6   7   8   9   10   >