On 21.7.2016 11:48, Maxime Ripard wrote:
> On Fri, Jul 15, 2016 at 12:38:54PM +0200, Ondřej Jirman wrote:
>> On 15.7.2016 10:53, Maxime Ripard wrote:
>>> On Fri, Jul 01, 2016 at 02:50:57AM +0200, Ondřej Jirman wrote:
>>>>>> /**
>>>>>>
Hello Michal,
On 30.6.2016 13:13, Michal Suchanek wrote:
> Hello,
>
> On 25 June 2016 at 05:45, wrote:
>> From: Ondrej Jirman
>>
>> Use Xulong Orange Pi One GPIO based regulator for
>> passive cooling and thermal management.
>>
>> Signed-off-by: Ondrej Jirman
>> ---
>> arch/arm/boot/dts/sun8
Hi Maxime,
I don't have your sunxi-ng clock patches in my mailbox, so I'm replying
to this.
On 26.7.2016 08:32, Maxime Ripard wrote:
> On Thu, Jul 21, 2016 at 11:52:15AM +0200, Ondřej Jirman wrote:
>>>>> If so, then yes, trying to switch to the 24MHz oscillator befor
On 28.7.2016 23:00, Maxime Ripard wrote:
> Hi Ondrej,
>
> On Thu, Jul 28, 2016 at 01:27:05PM +0200, Ondřej Jirman wrote:
>> Hi Maxime,
>>
>> I don't have your sunxi-ng clock patches in my mailbox, so I'm replying
>> to this.
>
> You c
Hi,
On 31.7.2016 12:31, Maxime Ripard wrote:
> Hi,
>
> On Fri, Jul 29, 2016 at 12:01:09AM +0200, Ondřej Jirman wrote:
>> On 28.7.2016 23:00, Maxime Ripard wrote:
>>> Hi Ondrej,
>>>
>>> On Thu, Jul 28, 2016 at 01:27:05PM +0200, Ondřej Jirman wrote:
&
Hello,
Thanks for your patches. I've been working with CSI on A83T, so I have
a few notes. My review is below. :)
Yong Deng píše v Po 13. 11. 2017 v 15:30 +0800:
> Allwinner V3s SoC have two CSI module. CSI0 is used for MIPI interface
> and CSI1 is used for parallel interface. This is not documen
Hello Mylène,
On Wed, Jul 18, 2018 at 08:27:17PM +0200, Mylène Josserand wrote:
> Add the support of regulator to use it as VCC source.
>
> Signed-off-by: Mylène Josserand
> ---
> .../bindings/input/touchscreen/edt-ft5x06.txt | 1 +
> drivers/input/touchscreen/edt-ft5x06.c | 2
Hi,
On Fri, Jan 26, 2018 at 04:19:35PM +0100, Philipp Rossak wrote:
> This patch adds support for the A83T ths sensor.
>
> The A83T does not support interrupts. This seems to be broken.
Though, you use support_irq = true below. And in my tests, IRQ for THS works on
A83T.
regards,
o.
> The ca
Hi,
On Thu, Mar 01, 2018 at 10:34:32PM +0100, Jernej Skrabec wrote:
> Currently exclusive TCON clock lock is never released, which, for
> example, prevents changing resolution on HDMI.
>
> In order to fix that, release clock when disabling TCON. TCON is always
> disabled first before new mode is
Hi Jernej,
On Thu, Mar 08, 2018 at 11:57:40PM +0100, Jernej Škrabec wrote:
> Hi,
>
> Dne četrtek, 08. marec 2018 ob 23:47:17 CET je Ondřej Jirman napisal(a):
> > Hi,
> >
> > On Thu, Mar 01, 2018 at 10:34:32PM +0100, Jernej Skrabec wrote:
> > > Currentl
set_status(..., 1,
false)
is called multiple times, which leads to unbalanced calls to
clk_set_rate_exclusive
and clk_rate_exclusive_put.
I don't know how to fix this.
regards,
o.
On Fri, Mar 09, 2018 at 01:13:14AM +0100, 'Ondřej Jirman' via linux-sunxi wrote:
> Hi Jernej,
Hi,
On Fri, Mar 09, 2018 at 07:19:33AM +0100, Jernej Škrabec wrote:
> Hi,
>
> Dne petek, 09. marec 2018 ob 01:44:55 CET je Ondřej Jirman napisal(a):
> > Hi,
> >
> > I've debugged this further and it seems that the code has incorrect
> > assumptions. See
On Thu, Nov 15, 2018 at 05:35:48PM +0800, Chen-Yu Tsai wrote:
> Hi everyone,
>
> This is v2 of my Broadcom-based Bluetooth controllers on Allwinner SoC-
> based SBCs series.
>
> Changes since v1:
>
> - Collected tags
> - Re-organize dt binding clocks and clock-names properties
> - Simplify
Hello,
On Tue, Oct 30, 2018 at 04:09:48PM +0800, Yong Deng wrote:
> I can't make v4l2-compliance always happy.
> The V3s CSI support many pixformats. But they are not always available.
> It's dependent on the input bus format (MEDIA_BUS_FMT_*).
> Example:
> V4L2_PIX_FMT_SBGGR8: MEDIA_BUS_FMT_SBGG
Hi Pavel,
On Thu, Feb 01, 2024 at 11:41:56AM +0100, Pavel Machek wrote:
> From: Ondrej Jirman
>
> This is driver for ANX7688 USB-C HDMI, with flashing and debugging
> features removed. ANX7688 is rather criticial piece on PinePhone,
> there's no display and no battery charging without it.
Don't
Hi Krzysztof,
On Mon, Apr 08, 2024 at 01:17:32PM GMT, Krzysztof Kozlowski wrote:
> On 08/04/2024 12:51, Pavel Machek wrote:
> > Add binding for anx7688 usb type-c bridge. I don't have a datasheet,
> > but I did best I could.
> >
> > Signed-off-by: Pavel Machek
>
> ...
>
> > + cabledet-gpios:
On Mon, Apr 08, 2024 at 01:24:03PM GMT, Krzysztof Kozlowski wrote:
> On 08/04/2024 13:21, Pavel Machek wrote:
> > Hi!
> >
> >>> Add binding for anx7688 usb type-c bridge. I don't have a datasheet,
> >>> but I did best I could.
> >>>
> >>> Signed-off-by: Pavel Machek
> >>
> >> ...
> >>
> >>> + ca
On Mon, Apr 08, 2024 at 01:59:12PM GMT, Krzysztof Kozlowski wrote:
> On 08/04/2024 13:52, Ondřej Jirman wrote:
> > On Mon, Apr 08, 2024 at 01:24:03PM GMT, Krzysztof Kozlowski wrote:
> >> On 08/04/2024 13:21, Pavel Machek wrote:
> >>> Hi!
> >>>
> >&
On Mon, Apr 08, 2024 at 03:27:00PM GMT, Krzysztof Kozlowski wrote:
> On 08/04/2024 14:48, Ondřej Jirman wrote:
> > Yeah, I understand where the confusion is. The driver is not for anx7688
> > chip
> > really. The driver is named anx7688, but that's mostly a historical
On Mon, Apr 08, 2024 at 10:12:30PM GMT, Krzysztof Kozlowski wrote:
> On 08/04/2024 17:17, Ondřej Jirman wrote:
> >
> > Now for things to not fail during suspend/resume based on PM callbacks
> > invocation order, anx7688 driver needs to enable this regulator too, as lo
On Tue, Apr 09, 2024 at 06:35:50PM GMT, Dmitry Baryshkov wrote:
> On Tue, Apr 09, 2024 at 01:04:12PM +0200, Pavel Machek wrote:
> > Hi!
> >
> > > > This is driver for ANX7688 USB-C HDMI, with flashing and debugging
> > > > features removed. ANX7688 is rather criticial piece on PinePhone,
> > > > t
On Wed, Apr 10, 2024 at 01:32:27PM GMT, megi xff wrote:
> On Tue, Apr 09, 2024 at 06:35:50PM GMT, Dmitry Baryshkov wrote:
> > On Tue, Apr 09, 2024 at 01:04:12PM +0200, Pavel Machek wrote:
> > > Hi!
> > >
> > > > > This is driver for ANX7688 USB-C HDMI, with flashing and debugging
> > > > > feature
On Wed, Apr 24, 2024 at 02:16:06AM GMT, Andy Shevchenko wrote:
> On Wed, Apr 24, 2024 at 1:41 AM Aren Moynihan wrote:
> >
> > From: Ondrej Jirman
> >
> > VDD power input can be used to completely power off the chip during
> > system suspend. Do so if available.
>
> ...
>
> > ret = stk33
On Wed, Apr 24, 2024 at 06:20:41PM GMT, Andy Shevchenko wrote:
> On Wed, Apr 24, 2024 at 3:59 PM Ondřej Jirman wrote:
> > On Wed, Apr 24, 2024 at 02:16:06AM GMT, Andy Shevchenko wrote:
> > > On Wed, Apr 24, 2024 at 1:41 AM Aren Moynihan
> > > wrote:
>
On Wed, Apr 24, 2024 at 08:31:27PM GMT, Andy Shevchenko wrote:
> On Wed, Apr 24, 2024 at 7:14 PM Ondřej Jirman wrote:
> > On Wed, Apr 24, 2024 at 06:20:41PM GMT, Andy Shevchenko wrote:
> > > On Wed, Apr 24, 2024 at 3:59 PM Ondřej Jirman wrote:
> > > > On Wed, Apr 24
Hello Samuel,
On Thu, Jan 28, 2021 at 10:22:08AM +0100, Wolfram Sang wrote:
> On Sun, Jan 03, 2021 at 04:51:46AM -0600, Samuel Holland wrote:
> > To save power, gate the clock when the bus is inactive, during system
> > sleep, and during shutdown. On some platforms, specifically Allwinner
> > A13/
Hello Dmitry,
thanks for looking into the patch. :)
On Wed, Jul 29, 2020 at 11:19:39PM -0700, Dmitry Torokhov wrote:
> Hi Ondrej,
>
> On Tue, Jul 14, 2020 at 12:23:01PM +0200, Ondrej Jirman wrote:
> > Make enable-gpio optional to allow using this driver with boards that
> > have vibrator connect
Hello,
On Wed, Jul 29, 2020 at 05:48:09PM +0200, Guido Günther wrote:
> Hi,
> On Sat, Jul 18, 2020 at 07:42:15PM +0200, Ondřej Jirman wrote:
> > Hello,
> >
> > On Sat, Jul 18, 2020 at 07:31:24PM +0200, Guido Günther wrote:
> > > Hi,
> > > On Thu, Jul 1
Hello Samuel,
On Mon, Aug 19, 2019 at 10:23:01PM -0500, Samuel Holland wrote:
> This series adds support for the "hardware message box" in sun8i, sun9i,
> and sun50i SoCs, used for communication with the ARISC management
> processor (the platform's equivalent of the ARM SCP). The end goal is to
>
Hi,
On Sun, Sep 08, 2019 at 10:54:17PM -0500, Samuel Holland wrote:
> On 9/8/19 10:22 PM, Ondřej Jirman wrote:
> > Hello Samuel,
> >
> > On Mon, Aug 19, 2019 at 10:23:01PM -0500, Samuel Holland wrote:
> >> This series adds support for the "hardware message bo
Hello Yangtao,
On Sat, Aug 10, 2019 at 05:28:12AM +, Yangtao Li wrote:
> This patch adds the support for allwinner thermal sensor, within
> allwinner SoC. It will register sensors for thermal framework
> and use device tree to bind cooling device.
>
> Signed-off-by: Yangtao Li
> ---
> MAINT
Hello,
On Sat, Aug 10, 2019 at 05:28:12AM +, Yangtao Li wrote:
> This patch adds the support for allwinner thermal sensor, within
> allwinner SoC. It will register sensors for thermal framework
> and use device tree to bind cooling device.
I've tested this driver on H6 SoC, and it reports tem
Hello Yangtao,
On Sat, Aug 10, 2019 at 05:28:11AM +, Yangtao Li wrote:
> This patchset add support for A64, H3, H5, H6 and R40 thermal sensor.
>
> Thx to Icenowy and Vasily.
>
> BTY, do a cleanup in thermal makfile.
I've added support for A83T and also some cleanups, according to my
feedbac
Hello Maxime,
On Mon, Sep 02, 2019 at 09:27:35AM +0200, Maxime Ripard wrote:
> Hi,
>
> On Sun, Sep 01, 2019 at 11:52:14PM +0200, Ondřej Jirman wrote:
> > Hello Yangtao,
> >
> > On Sat, Aug 10, 2019 at 05:28:11AM +, Yangtao Li wrote:
> > > This patchset add
Hi,
On Wed, Jan 30, 2019 at 04:41:53PM +0800, Chen-Yu Tsai wrote:
> Hi everyone,
>
> This series enables DVFS for the CPU cores (aka cpufreq) on the
> Allwinner H5 SoC. The OPP table was taken from Armbian, with minor
> tweaks to the maximum voltage to account for slightly increased voltage
> on
Hi,
On Tue, Aug 27, 2019 at 03:34:43PM +0200, Maxime Ripard wrote:
> On Sun, Aug 25, 2019 at 03:03:36PM +0200, Jernej Skrabec wrote:
> > Depending on kernel and bootloader configuration, it's possible that
> > Realtek ethernet PHY isn't powered on properly. It needs some time
> > before it can be
Hello Maxime,
On Fri, Aug 23, 2019 at 12:08:07PM +0200, Maxime Ripard wrote:
> Hi,
>
> On Fri, Aug 23, 2019 at 11:42:28AM +0200, meg...@megous.com wrote:
> > From: Ondrej Jirman
> >
> > Orange Pi 3 has AP6256 WiFi/BT module. WiFi part of the module is called
> > bcm43356 and can be used with the
Hi,
On Sat, Aug 24, 2019 at 02:32:32PM +0200, Jernej Škrabec wrote:
> Hi!
>
> Dne torek, 20. avgust 2019 ob 17:19:33 CEST je meg...@megous.com napisal(a):
> > From: Ondrej Jirman
> >
> > RTC on H6 is mostly the same as on H5 and H3. It has slight differences
> > mostly in features that are not
Hi,
On Sat, Aug 24, 2019 at 10:06:14AM +0200, Jernej Škrabec wrote:
> Dne sobota, 24. avgust 2019 ob 10:04:24 CEST je Jernej Škrabec napisal(a):
> > Hi!
> >
> > Dne torek, 20. avgust 2019 ob 17:19:31 CEST je meg...@megous.com napisal(a):
> > > From: Ondrej Jirman
> > >
> > > I went through the
On Sat, Aug 24, 2019 at 02:51:54PM +0200, Jernej Škrabec wrote:
> Dne sobota, 24. avgust 2019 ob 14:46:54 CEST je Ondřej Jirman napisal(a):
> > Hi,
> >
> > On Sat, Aug 24, 2019 at 02:32:32PM +0200, Jernej Škrabec wrote:
> > > Hi!
> > >
> > > Dn
On Sat, Aug 24, 2019 at 03:16:41PM +0200, Jernej Škrabec wrote:
> Dne sobota, 24. avgust 2019 ob 15:05:44 CEST je Ondřej Jirman napisal(a):
> > On Sat, Aug 24, 2019 at 02:51:54PM +0200, Jernej Škrabec wrote:
> > > Dne sobota, 24. avgust 2019 ob 14:46:54 CEST je Ondřej Jirman napi
Hello Jernej,
On Sat, Aug 24, 2019 at 11:09:49PM +0200, Jernej Škrabec wrote:
> > Visually?
> >
> > That would explain why it doesn't work for you. The mainline RTC driver
> > disables auto-switch feature, and if your board doesn't have a crystal for
> > LOSC, RTC will not generate a clock for th
On Sat, Aug 24, 2019 at 11:36:26PM +0200, Jernej Škrabec wrote:
> Dne sobota, 24. avgust 2019 ob 23:27:46 CEST je Ondřej Jirman napisal(a):
> > Hello Jernej,
> >
> > On Sat, Aug 24, 2019 at 11:09:49PM +0200, Jernej Škrabec wrote:
> > > > Visually?
> >
Hi Maxime,
On Fri, Aug 23, 2019 at 12:31:34PM +0200, megous hlavni wrote:
> From: Ondrej Jirman
>
> (Resend to add missing lists, sorry for the noise.)
>
> This series implements bluetooth support for Xunlong Orange Pi 3 board.
>
> The board uses AP6256 WiFi/BT 5.0 chip.
>
> Summary of change
HI Icenowy,
On Sun, Oct 06, 2019 at 11:12:43PM +0800, Icenowy Zheng wrote:
> 在 2019-10-06日的 22:44 +0800，Icenowy Zheng写道：
> > 在 2019-10-03四的 09:53 +0530，Jagan Teki写道：
> > > Hi Wens,
> > >
> > > On Tue, Oct 1, 2019 at 1:34 PM Icenowy Zheng
> > > wrote:
> > > > This reverts commit 62e7511a4f4dcf07f
Hi Samuel,
On Mon, Aug 19, 2019 at 10:23:05PM -0500, Samuel Holland wrote:
> Allwinner sun8i, sun9i, and sun50i SoCs contain a hardware message box
> used for communication between the ARM CPUs and the ARISC management
> coprocessor. The hardware contains 8 unidirectional 4-message FIFOs.
>
> Add
Hi,
On Tue, Aug 20, 2019 at 08:07:53AM -0500, Samuel Holland wrote:
> On 8/20/19 6:18 AM, Ondřej Jirman wrote:
> > Hi Samuel,
> >
> > On Mon, Aug 19, 2019 at 10:23:05PM -0500, Samuel Holland wrote:
> >> Allwinner sun8i, sun9i, and sun50i SoCs contain a hard
Hi Andrew,
On Tue, Aug 20, 2019 at 05:39:39PM +0200, Andrew Lunn wrote:
> On Tue, Aug 20, 2019 at 04:53:40PM +0200, meg...@megous.com wrote:
> > From: Ondrej Jirman
> >
> > Use devm_regulator_get instead of devm_regulator_get_optional and rely
> > on dummy supply. This avoids NULL checks before
On Tue, Aug 20, 2019 at 05:39:39PM +0200, Andrew Lunn wrote:
> On Tue, Aug 20, 2019 at 04:53:40PM +0200, meg...@megous.com wrote:
> > From: Ondrej Jirman
> >
> > Use devm_regulator_get instead of devm_regulator_get_optional and rely
> > on dummy supply. This avoids NULL checks before regulator_en
Hi,
On Tue, Aug 20, 2019 at 05:57:44PM +0200, Andrew Lunn wrote:
> On Tue, Aug 20, 2019 at 05:47:14PM +0200, Ondřej Jirman wrote:
> > Hi Andrew,
> >
> > On Tue, Aug 20, 2019 at 05:39:39PM +0200, Andrew Lunn wrote:
> > > On Tue, Aug 20, 2019 at 04:53:40PM
On Tue, Aug 20, 2019 at 11:20:22AM -0500, Rob Herring wrote:
> On Tue, Aug 20, 2019 at 9:53 AM wrote:
> >
> > From: Ondrej Jirman
> >
> > Some PHYs require separate power supply for I/O pins in some modes
> > of operation. Add phy-io-supply property, to allow enabling this
> > power supply.
>
>
On Tue, Aug 20, 2019 at 11:57:06AM -0500, Rob Herring wrote:
> On Tue, Aug 20, 2019 at 11:34 AM Ondřej Jirman wrote:
> >
> > On Tue, Aug 20, 2019 at 11:20:22AM -0500, Rob Herring wrote:
> > > On Tue, Aug 20, 2019 at 9:53 AM wrote:
> > > >
> > > >
Hi Clément,
On Tue, Apr 28, 2020 at 04:26:29PM +0200, Clément Péron wrote:
> Tanix TX6 has a fixed regulator. As DVFS is instructed to change
> voltage to meet OPP table, the DVFS is not working as expected.
>
> Avoid to introduce a new dedicated OPP Table where voltage are
> equals to the fixed
On Wed, Oct 16, 2019 at 02:55:54PM -0500, Adam Ford wrote:
> I have an i.MX6Q with an LCD and PWM controlled backlight. On 5.4-RC1
> through the current master (16 Oct 2019), the backlight does not come
> on by default. I can get it come on by manually setting the
> brightness, but any video acti
On Tue, May 21, 2019 at 04:27:34PM +0200, Maxime Ripard wrote:
> On Tue, May 21, 2019 at 12:27:21PM +0200, Ondřej Jirman wrote:
> > On Tue, May 21, 2019 at 10:05:15AM +0200, Maxime Ripard wrote:
> > > On Sat, May 18, 2019 at 01:27:39AM +0800, Frank Lee wrote:
> > > >
Hi Maxime,
On Tue, Apr 09, 2019 at 04:52:25PM +0200, Maxime Ripard wrote:
> On Tue, Apr 09, 2019 at 04:40:40PM +0800, Chen-Yu Tsai wrote:
> > On Tue, Apr 9, 2019 at 4:28 PM Maxime Ripard
> > wrote:
> > >
> > > On Tue, Apr 09, 2019 at 04:07:34PM +0800, Chen-Yu Tsai wrote:
> > > > On Tue, Apr 9, 2
Hello Yangtao,
On Sat, May 18, 2019 at 12:34:57AM +0800, Frank Lee wrote:
> HI,
>
> On Fri, May 17, 2019 at 2:29 AM Ondřej Jirman wrote:
> >
> > Hi Yangtao,
> >
> > thank you for work on this driver.
> >
> > On Fri, May 17, 2019 at 02:06
Hi Maxime,
On Mon, May 20, 2019 at 01:10:49PM +0200, Maxime Ripard wrote:
> Hi Ondřej,
>
> On Sun, May 19, 2019 at 03:54:22PM +0200, Ondřej Jirman wrote:
> > On Tue, Apr 09, 2019 at 04:52:25PM +0200, Maxime Ripard wrote:
> > > On Tue, Apr 09, 2019 at 04:40:40PM +
On Mon, May 20, 2019 at 04:05:50PM +0200, Maxime Ripard wrote:
> On Mon, May 20, 2019 at 01:38:54PM +0200, Ondřej Jirman wrote:
> > Hi Maxime,
> >
> > On Mon, May 20, 2019 at 01:10:49PM +0200, Maxime Ripard wrote:
> > > Hi Ondřej,
> > >
> > > On Sun,
On Mon, May 20, 2019 at 05:06:34PM +0200, verejna wrote:
> From: Ondrej Jirman
>
> This is a re-send of Chen-Yu's A83T CSI patch series with review tags
> applied and removed address/size cells from csi_in port. Already applied
> patches from v1 were dropped.
>
> The series is ready to be merge
Hi Maxime,
On Tue, May 21, 2019 at 10:05:15AM +0200, Maxime Ripard wrote:
> On Sat, May 18, 2019 at 01:27:39AM +0800, Frank Lee wrote:
> > On Fri, May 17, 2019 at 3:36 PM Maxime Ripard
> > wrote:
> > >
> > > On Fri, May 17, 2019 at 01:51:56AM +0800, Frank Lee wrote:
> > > > > > +struct sun50i_th
Hi Maxime,
On Tue, May 21, 2019 at 01:46:11PM +0200, Maxime Ripard wrote:
> Hi,
>
> On Tue, May 21, 2019 at 01:50:08AM +0200, meg...@megous.com wrote:
> > From: Ondrej Jirman
> >
> > Orange Pi 3 board requires enabling a voltage shifting circuit via GPIO
> > for the DDC bus to be usable.
> >
> >
Hello Yangtao,
On Sun, May 26, 2019 at 02:48:13AM +0800, Frank Lee wrote:
> On Sun, May 19, 2019 at 10:22 PM Ondřej Jirman wrote:
> >
> > I know, I don't think it needs to be per-soc. These actions are all shared
> > by
> > all SoCs. Maybe with an exception
Hi Clément,
On Mon, May 27, 2019 at 12:25:26AM +0200, Clément Péron wrote:
> Hi,
>
> A64 IR support series[1] pointed out that an A31 bindings should be
> introduced.
>
> This series introduce the A31 compatible bindings, then switch it on
> the already existing board.
>
> Finally introduce A64
Hi Yangtao,
On Sat, May 25, 2019 at 02:13:27PM -0400, Yangtao Li wrote:
> This patch adds the support for allwinner thermal sensor, within
> allwinner SoC. It will register sensors for thermal framework
> and use device tree to bind cooling device.
>
> Signed-off-by: Yangtao Li
> ---
> MAINTAIN
Hi Clément,
On Mon, May 27, 2019 at 04:59:35PM +0200, Clément Péron wrote:
> Hi Ondřej,
>
> On Mon, 27 May 2019 at 15:48, Ondřej Jirman wrote:
> >
> > Hi Clément,
> >
> > On Mon, May 27, 2019 at 12:25:26AM +0200, Clément Péron wrote:
> > > Hi,
> &
Hi Clément,
On Mon, May 27, 2019 at 06:31:17PM +0200, verejna wrote:
> Hi Clément,
>
> On Mon, May 27, 2019 at 04:59:35PM +0200, Clément Péron wrote:
> > Hi Ondřej,
> >
> > On Mon, 27 May 2019 at 15:48, Ondřej Jirman wrote:
> > >
> > > Hi Clément,
&
Hi Clément,
On Mon, May 27, 2019 at 08:49:59PM +0200, Clément Péron wrote:
> Hi Ondrej,
>
> >
> > I'm testing on Orange Pi 3.
> >
> > With your patches, I get kernel lockup after ~1 minute of use (ssh stops
> > responding/serial console stops responding). I don't have RC controller to
> > test
>
Hi Clément,
On Mon, May 27, 2019 at 09:30:16PM +0200, verejna wrote:
> Hi Clément,
>
> On Mon, May 27, 2019 at 08:49:59PM +0200, Clément Péron wrote:
> > Hi Ondrej,
> >
> > >
> > > I'm testing on Orange Pi 3.
> > >
> > > With your patches, I get kernel lockup after ~1 minute of use (ssh stops
>
Hello Maxime,
On Sun, May 12, 2019 at 03:39:30PM +0200, Maxime Ripard wrote:
> Hi,
>
> Thanks a lot for working on this!
>
> On Sun, May 12, 2019 at 04:26:13AM -0400, Yangtao Li wrote:
> > This patch adds the support for allwinner thermal sensor, within
> > allwinner SoC. It will register sensor
Hello Yangtao,
On Sun, May 12, 2019 at 04:26:13AM -0400, Yangtao Li wrote:
> diff --git a/drivers/thermal/sun50i_thermal.c
> b/drivers/thermal/sun50i_thermal.c
> new file mode 100644
> index ..3bdb3677b3d4
> --- /dev/null
> +++ b/drivers/thermal/sun50i_thermal.c
> @@ -0,0 +1,357 @@
>
On Sun, May 12, 2019 at 04:26:13AM -0400, Yangtao Li wrote:
> This patch adds the support for allwinner thermal sensor, within
> allwinner SoC. It will register sensors for thermal framework
> and use device tree to bind cooling device.
>
> Based on driver code found here:
> https://megous.com/git
Hi,
On Tue, May 07, 2019 at 01:08:39AM +0800, Frank Lee wrote:
> On Tue, May 7, 2019 at 12:52 AM Icenowy Zheng wrote:
> >
> > 在 2019-05-06一的 14:28 +0200，Maxime Ripard写道：
> > > Hi,
> > >
> > > On Sun, May 05, 2019 at 04:22:15PM +0100, Jonathan Cameron wrote:
> > > > On Fri, 3 May 2019 03:28:07 -0
Hi Maxime,
On Thu, May 02, 2019 at 09:34:01AM +0200, Maxime Ripard wrote:
> On Sat, Apr 20, 2019 at 10:52:40AM -0400, Yangtao Li wrote:
> > Orangepi 3 has HDMI type A connector.
> >
> > Signed-off-by: Yangtao Li
>
> Queued for 5.3, thanks!
> Maxime
This patch is not enough. HDMI support on Oran
Hi Yangtao,
On Sat, Apr 20, 2019 at 10:52:40AM -0400, Yangtao Li wrote:
> Orangepi 3 has HDMI type A connector.
It also has DDC-IO-EN, whithout which HDMI will not work as expected
by most users.
I'm working on a proper solution (discussion here):
https://lkml.org/lkml/2019/4/26/910
regards,
On Mon, Aug 12, 2019 at 04:54:15PM -0700, Vasily Khoruzhick wrote:
> On Mon, Aug 12, 2019 at 4:46 PM Frank Lee wrote:
> >
> > HI Vasily,
> >
> > On Sat, Aug 10, 2019 at 2:17 PM Vasily Khoruzhick
> > wrote:
> > >
> > > On Fri, Aug 9, 2019 at 10:31 PM Yangtao Li wrote:
> > > >
> > > > H3 has extr
On Fri, Aug 09, 2019 at 01:39:30AM +0200, Alexandre Belloni wrote:
> On 08/08/2019 14:12:37+0200, Ondřej Jirman wrote:
> > On Wed, Aug 07, 2019 at 12:55:02PM +0200, Alexandre Belloni wrote:
> > > Hi,
> > >
> > > On 06/08/2019 20:30:45+0200, Ondřej Jirman wrote:
On Mon, Aug 05, 2019 at 06:16:14PM +0800, Chen-Yu Tsai wrote:
> On Fri, Apr 12, 2019 at 8:07 PM megous via linux-sunxi
> wrote:
> >
> > From: Ondrej Jirman
> >
> > RTC on H6 is mostly the same as on H5 and H3. It has slight differences
> > mostly in features that are not yet supported by this dri
On Mon, Aug 05, 2019 at 06:16:14PM +0800, Chen-Yu Tsai wrote:
> On Fri, Apr 12, 2019 at 8:07 PM megous via linux-sunxi
> wrote:
> >
> > From: Ondrej Jirman
> >
> > RTC on H6 is mostly the same as on H5 and H3. It has slight differences
> > mostly in features that are not yet supported by this dri
On Mon, Aug 05, 2019 at 06:54:17PM +0800, Chen-Yu Tsai wrote:
> On Mon, Aug 5, 2019 at 6:45 PM Ondřej Jirman wrote:
> >
> > On Mon, Aug 05, 2019 at 06:16:14PM +0800, Chen-Yu Tsai wrote:
> > > On Fri, Apr 12, 2019 at 8:07 PM megous via linux-sunxi
> > > wrote:
&g
On Mon, Apr 15, 2019 at 04:18:12PM +0800, Chen-Yu Tsai wrote:
> On Fri, Apr 12, 2019 at 8:07 PM megous via linux-sunxi
> wrote:
> >
> > From: Ondrej Jirman
> >
> > I went through the datasheets for H6 and H5, and compared the differences.
> > RTCs are largely similar, but not entirely compatible.
On Tue, Aug 06, 2019 at 08:30:45PM +0200, megous hlavni wrote:
> On Mon, Apr 15, 2019 at 04:18:12PM +0800, Chen-Yu Tsai wrote:
> > On Fri, Apr 12, 2019 at 8:07 PM megous via linux-sunxi
> > wrote:
> > >
> > > From: Ondrej Jirman
> > >
> > > I went through the datasheets for H6 and H5, and compare
On Wed, Aug 07, 2019 at 12:55:02PM +0200, Alexandre Belloni wrote:
> Hi,
>
> On 06/08/2019 20:30:45+0200, Ondřej Jirman wrote:
> > Maybe whether XO or DCXO is used also matters if you want to do some fine
> > tunning of DCXO (control register has pletny of options), but
Hello Yangtao,
On Sun, Jun 23, 2019 at 12:42:06PM -0400, Yangtao Li wrote:
> This patch adds the support for allwinner h3 thermal sensor.
>
> Signed-off-by: Yangtao Li
> ---
> drivers/thermal/sun8i_thermal.c | 72 +
> 1 file changed, 72 insertions(+)
>
> diff --
Hello Yangtao,
On Sun, Jun 23, 2019 at 12:41:56PM -0400, Yangtao Li wrote:
> This patch adds the support for allwinner thermal sensor, within
> allwinner SoC. It will register sensors for thermal framework
> and use device tree to bind cooling device.
>
> Signed-off-by: Yangtao Li
> ---
> MAINT
On Mon, Jun 24, 2019 at 08:23:33PM +0200, Maxime Ripard wrote:
> On Sun, Jun 23, 2019 at 12:42:03PM -0400, Yangtao Li wrote:
> > H3 has extra clock, so introduce something in ths_thermal_chip/ths_device
> > and adds the process of the clock.
> >
> > This is pre-work for supprt it.
> >
> > Signed-of
Hello Frank,
On Fri, Jun 07, 2019 at 09:50:08PM +0800, Frank Lee wrote:
> HI Ondřej,
>
>
> On Mon, May 27, 2019 at 10:25 PM Ondřej Jirman wrote:
> >
> > Hi Yangtao,
> >
> > On Sat, May 25, 2019 at 02:13:27PM -0400, Yangtao Li wrote:
> > > This
On Fri, Jun 07, 2019 at 07:18:21PM +0200, verejna wrote:
> Hello Frank,
>
> On Fri, Jun 07, 2019 at 09:50:08PM +0800, Frank Lee wrote:
> > HI Ondřej,
> >
> >
> > On Mon, May 27, 2019 at 10:25 PM Ondřej Jirman wrote:
> > >
> > > Hi Yangtao,
&
Hello Jose,
On Tue, Jun 11, 2019 at 05:18:44PM +0200, Jose Abreu wrote:
> [ Hope this diff looks better (generated with --minimal) ]
>
> This converts stmmac to use phylink. Besides the code redution this will
> allow to gain more flexibility.
I'm testing 5.3-rc1 and on Orange Pi 3 (uses stmmac-
On Mon, Jul 22, 2019 at 01:28:51PM +, Jose Abreu wrote:
> From: Ondřej Jirman
> Date: Jul/22/2019, 13:42:40 (UTC+00:00)
>
> > Hello Jose,
> >
> > On Tue, Jun 11, 2019 at 05:18:44PM +0200, Jose Abreu wrote:
> > > [ Hope this diff looks better (generated
On Mon, Jul 22, 2019 at 02:26:45PM +, Jose Abreu wrote:
> From: Andrew Lunn
> Date: Jul/22/2019, 15:19:43 (UTC+00:00)
>
> > On Mon, Jul 22, 2019 at 01:58:20PM +, Jose Abreu wrote:
> > > From: Andrew Lunn
> > > Date: Jul/22/2019, 14:40:23 (UTC+00:00)
> > >
> > > > Does this mean that all
Hello Giulio,
this patch breaks LVDS output on A83T. Without it, modesetting works,
with it there's no output.
Some more info below...
On Tue, Mar 13, 2018 at 12:20:19PM +0100, Giulio Benetti wrote:
> mode_valid function is missing for lvds.
>
> Add it making it pointed by encoder helper functi
Hello,
On Thu, Apr 19, 2018 at 04:02:08PM +0200, Giulio Benetti wrote:
> Hi everybody,
>
> Il 19/04/2018 15:36, Chen-Yu Tsai ha scritto:
> > On Thu, Apr 19, 2018 at 9:34 PM, Ondřej Jirman
> > wrote:
> > > Hello Giulio,
> > >
> > > this patch bre
Hello Mylène,
Please also add this:
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index ce53ceaf4cc5..d9c8ecf88ec6 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -51,7 +51,7 @@ config MACH_SUN9I
config ARCH_SUNXI_MC_SMP
bool
Dne 18.1.2017 v 17:56 Maxime Ripard napsal(a):
>>> What's your current plan to fix that? I guess the easiest (and most
>>> likely to be reusable) would be to allow for clock tables, instead of
>>> using the generic approach. We might have some other clocks (like
>>> audio or video) that would need
Hi Maxime,
Dne 16.1.2017 v 17:43 Maxime Ripard napsal(a):
>> It does lock up quickly with mainline ccu_nkmp_find_best algorithm
>> for finding factors.
>>
>> Even with linux kernel, it breaks. It's just more difficult to hit the
>> right conditions. I got oops only right after boot when running cp
Dne 16.1.2017 v 20:14 Icenowy Zheng napsal(a):
> The PHY0 on H3 can be wired either to MUSB controller or OHCI/EHCI
> controller.
>
> The original driver wired it to OHCI/EHCI controller; however, as the
> code to use PHY0 as OHCI/EHCI is missing, it makes the PHY fully
> unusable.
>
> Rename the
Maxime,
Dne 25.11.2016 v 01:28 meg...@megous.com napsal(a):
> From: Ondrej Jirman
>
> When adjusting PLL_CPUX on H3, the PLL is temporarily driven
> too high, and the system becomes unstable (oopses or hangs).
>
> Add a notifier to avoid this situation by temporarily switching
> to a known stab
Dne 9.1.2017 v 10:59 Maxime Ripard napsal(a):
> On Sat, Jan 07, 2017 at 04:49:18PM +0100, Ondřej Jirman wrote:
>> Maxime,
>>
>> Dne 25.11.2016 v 01:28 meg...@megous.com napsal(a):
>>> From: Ondrej Jirman
>>>
>>> When adjusting PLL_CPUX on H3, the
On 15.7.2016 10:53, Maxime Ripard wrote:
> On Fri, Jul 01, 2016 at 02:50:57AM +0200, Ondřej Jirman wrote:
>>>> /**
>>>> + * sun8i_h3_apply_pll1_factors() - applies n, k, m, p factors to the
>>>> + * register using an algorithm that tries to reserve the PLL
1 - 100 of 194 matches
Mail list logo
