Hi Ilia,
Thanks for your answer.
On 16-06-2016 13:39, Ilia Mirkin wrote:
> On Thu, Jun 16, 2016 at 8:09 AM, Jose Abreu wrote:
>> Hi Daniel,
>>
>> Sorry to bother you again. I promise this is the last time :)
>>
>> On 15-06-2016 11:15, Daniel Vetter wrote:
>
Hi,
On 24-06-2016 03:40, Kuninori Morimoto wrote:
> From: Kuninori Morimoto
>
> Current dw-hdmi is supporting sound via AHB bus, but it has
> I2S audio feature too. This patch adds I2S audio support to dw-hdmi.
> This HDMI I2S is supported by using ALSA SoC common HDMI encoder
> driver.
>
> Sign
Thank you for your test. I'm happy if it could have it.
>
> Mark, Thierry, Daniel
> I wonder who can be maintainer for this patch ??
>
> Best regards
> ---
> Kuninori Morimoto
Tested-by: Jose Abreu
Best regards,
Jose Miguel Abreu
Hi Russell,
On 04-08-2016 15:31, Russell King - ARM Linux wrote:
> On Thu, Aug 04, 2016 at 02:58:00PM +0100, Jose Abreu wrote:
>> Hi Russell,
>>
>> I am not sure if this is a bug in DRM or a bad implementation of
>> dw-hdmi. I've seen at least two more drivers th
Hi Russell,
On 04-08-2016 16:32, Russell King - ARM Linux wrote:
> On Thu, Aug 04, 2016 at 11:44:50AM +0100, Jose Abreu wrote:
>> Currently ISCR and ACP packets are not being sent causing
>> HDMI compliance tests like CTS 7-19 HDMI 1.4b to fail.
> Hmm. Reading the HDMI sp
Hi Russell,
On 04-08-2016 16:04, Russell King - ARM Linux wrote:
> On Thu, Aug 04, 2016 at 03:57:21PM +0100, Jose Abreu wrote:
>> Hmm, I am not debugging it right now but I remember that
>> drm_fb_helper_probe_connector_modes() was not being called at the
>> time I set
Hi,
On 05-08-2016 09:13, Chris Wilson wrote:
> On Fri, Aug 05, 2016 at 10:06:08AM +0200, Daniel Vetter wrote:
>> On Fri, Aug 05, 2016 at 12:01:25AM +0100, Russell King - ARM Linux wrote:
>>> On Thu, Aug 04, 2016 at 06:13:18PM +0100, Jose Abreu wrote:
>>>> Hi Russe
Hi Sylwester,
On 19-06-2017 22:18, Sylwester Nawrocki wrote:
> On 06/19/2017 11:01 AM, Jose Abreu wrote:
>> Using fixed-clock was already in my todo list. Regarding phy I
>> need to pass pdata so that the callbacks between controller and
>> phy are established. I also need
HI Sylwester,
On 19-06-2017 23:10, Sylwester Nawrocki wrote:
> On 06/19/2017 11:33 AM, Jose Abreu wrote:
>> On 18-06-2017 19:04, Sylwester Nawrocki wrote:
>>> On 06/16/2017 06:38 PM, Jose Abreu wrote:
>>>> This is an initial submission for the Synopsys Designware
Add a entry for Synopsys Designware HDMI Receivers drivers
and phys.
Signed-off-by: Jose Abreu
Cc: Carlos Palminha
---
MAINTAINERS | 7 +++
1 file changed, 7 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index c4be6d4..7ebc6dd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11354,6
Document the bindings for the Synopsys Designware HDMI RX.
Signed-off-by: Jose Abreu
Cc: Carlos Palminha
Cc: Rob Herring
Cc: Mark Rutland
Cc: Mauro Carvalho Chehab
Cc: Hans Verkuil
Cc: Sylwester Nawrocki
Changes from v3:
- Document the new DT bindings suggested by Sylwester
tform.
Jose Abreu (4):
[media] platform: Add Synopsys Designware HDMI RX PHY e405 Driver
[media] platform: Add Synopsys Designware HDMI RX Controller Driver
MAINTAINERS: Add entry for Synopsys Designware HDMI drivers
dt-bindings: media: Document Synopsys Designware HDMI RX
Cc: Carlos Palminh
some sources might not be
very stable at sending the video (i.e. we must react
accordingly).
Signed-off-by: Jose Abreu
Cc: Carlos Palminha
Cc: Mauro Carvalho Chehab
Cc: Hans Verkuil
Cc: Sylwester Nawrocki
Changes from v3:
- Use v4l2 async API (Sylwester)
- D
.
configuration functions) and the controller must provide read/write
callbacks, as well as other specific functions.
Signed-off-by: Jose Abreu
Cc: Carlos Palminha
Cc: Mauro Carvalho Chehab
Cc: Hans Verkuil
Cc: Sylwester Nawrocki
Changes from v3:
- Use v4l2 async API (Sylwester)
- Use
Hi Daniel, Alexey,
On 25-05-2017 15:19, Jose Abreu wrote:
> Now that we have a callback to check if crtc supports a given mode
> we can use it in arcpgu so that we restrict the number of probbed
> modes to the ones we can actually display.
>
> This is specially useful because
Hi,
This adds support for a new IP version (5) of dwmac and for
TSN features as defined by IEEE802.1Qbv-2015 and IEEE802.1Qbu.
Please review.
Best regards,
Jose Miguel Abreu
Jose Abreu (2):
net: stmmac: Add support for DWMAC5 with TSN features
bindings: net: stmmac: Add documentation for
transmission in this time window/slot.
FPE:
The IEEE802.1Qbu defines a mechanism which breaks interfering
frames into smaller fragments shuch that we have a more efficient
use of network bandwidth. This needs EST enabled.
Signed-off-by: Jose Abreu
Cc: David S. Miller
Cc: Joao Pinto
Cc: Giuseppe
This adds the documentation for TSN feature EST and FP.
Signed-off-by: Jose Abreu
Cc: David S. Miller
Cc: Joao Pinto
Cc: Giuseppe Cavallaro
Cc: Alexandre Torgue
Cc: Rob Herring
---
Documentation/devicetree/bindings/net/stmmac.txt | 20
1 file changed, 20 insertions
Hi Florian,
On 25-10-2017 20:34, Florian Fainelli wrote:
> On 10/25/2017 07:04 AM, Jose Abreu wrote:
>> This adds the documentation for TSN feature EST and FP.
>>
>> Signed-off-by: Jose Abreu
>> Cc: David S. Miller
>> Cc: Joao Pinto
>> Cc: Giuseppe Ca
According to DT bindings documentation we are expecting a
property called "snps,read-requests" but we are parsing
instead a property called "read,read-requests".
This is clearly a typo. Fix it.
Signed-off-by: Jose Abreu
Cc: Joao Pinto
Cc: David S. Miller
Cc: Giuseppe Cava
According to DWMAC databook the first queue operating mode
must always be in DCB.
As MTL_QUEUE_DCB = 1, we need to always set the first queue
operating mode to DCB otherwise driver will think that queue
is in AVB mode (because MTL_QUEUE_AVB = 0).
Signed-off-by: Jose Abreu
Cc: Joao Pinto
Cc
Hi Andrew,
On 26-10-2017 10:03, Andrew Lunn wrote:
>> These parameters may also need to change in runtime depending on
>> the scheduled traffic. Unfortunately, net subsystem does not yet
>> support TSN so this will have to wait and for now we will use
>> fixed parameters.
> Hi Jose
>
> what you sh
Hi Andrew,
On 26-10-2017 10:03, Andrew Lunn wrote:
>> These parameters may also need to change in runtime depending on
>> the scheduled traffic. Unfortunately, net subsystem does not yet
>> support TSN so this will have to wait and for now we will use
>> fixed parameters.
> Hi Jose
>
> what you sh
Hi Bhadram,
On 26-10-2017 11:51, Bhadram Varka wrote:
> Hi Jose,
>
>> -Original Message-
>> From: netdev-ow...@vger.kernel.org [mailto:netdev-
>> ow...@vger.kernel.org] On Behalf Of Jose Abreu
>> Sent: Thursday, October 26, 2017 2:37 PM
>> To:
On 26-10-2017 15:44, Bhadram Varka wrote:
> Hi Jose,
>
>> -Original Message-----
>> From: Jose Abreu [mailto:jose.ab...@synopsys.com]
>> Sent: Thursday, October 26, 2017 5:19 PM
>> To: Bhadram Varka ; net...@vger.kernel.org;
>> linux-kernel@vger.kernel.org
Hi Jesus,
On 26-10-2017 17:28, Jesus Sanchez-Palencia wrote:
> Hi Jose,
>
>
> On 10/25/2017 07:02 AM, Jose Abreu wrote:
>> Hi,
>>
>> This adds support for a new IP version (5) of dwmac and for
>> TSN features as defined by IEEE802.1Qbv-2015 and IEEE802.1Qbu
Hi Jesus,
On 26-10-2017 17:23, Jesus Sanchez-Palencia wrote:
> Hi Jose,
>
>
> On 10/26/2017 03:08 AM, Jose Abreu wrote:
>> Hi Andrew,
>>
>> On 26-10-2017 10:03, Andrew Lunn wrote:
>>>> These parameters may also need to change in runtime depending on
>
Hi Andrew,
On 26-10-2017 22:56, Andrew Lunn wrote:
>> About my patches, what I think would be better now would be to
>> drop the configuration by DT and integrate the remaining
>> configuration, letting the EST parameters be populated by SoC
>> specific wrappers.
> Hi Jose
>
> The problem with SoC
Hi Peppe,
On 27-10-2017 13:29, Giuseppe CAVALLARO wrote:
> Hello
>
> On 10/27/2017 11:05 AM, Jose Abreu wrote:
>> I think we should take advantage of the fact that this is working
>> and ready to be merged. Its just HW configuration but maybe it
>> can serve as momentu
transmission in this time window/slot.
FPE:
The IEEE802.1Qbu defines a mechanism which breaks interfering
frames into smaller fragments shuch that we have a more efficient
use of network bandwidth. This needs EST enabled.
Signed-off-by: Jose Abreu
Cc: David S. Miller
Cc: Joao Pinto
Cc: Giuseppe
Hi Jerome,
On 24-08-2018 10:04, Jerome Brunet wrote:
> This reverts commit 4ae0169fd1b3c792b66be58995b7e6b629919ecf.
>
> This change in the handling of the coalesce timer is causing regression on
> (at least) amlogic platforms.
>
> Network will break down very quickly (a few seconds) after startin
Add a new helper to call crtc->mode_valid, connector->mode_valid
and encoder->mode_valid callbacks.
Suggested-by: Ville Syrjälä
Signed-off-by: Jose Abreu
Cc: Carlos Palminha
Cc: Alexey Brodkin
Cc: Ville Syrjälä
Cc: Daniel Vetter
Cc: Dave Airlie
Cc: Andrzej Hajda
Cc: Arch
also change the documentation so that the new and old callbacks
are correctly documented.
Only the callbacks were implemented to simplify review process,
following patches will make use of them.
Signed-off-by: Jose Abreu
Cc: Carlos Palminha
Cc: Alexey Brodkin
Cc: Ville Syrjälä
Cc: Daniel
g/patch/9702233/
Jose Abreu (6):
drm: Add crtc/encoder/bridge->mode_valid() callbacks
drm: Add drm_{crtc/encoder/connector}_mode_valid()
drm: Introduce drm_bridge_mode_valid()
drm: Use new mode_valid() helpers in connector probe helper
drm: Use mode_valid() in atomic modeset
this clock
does not support all the needed ranges.
Also, remove the atomic_check() callback as mode_valid() callback
will be called before.
Signed-off-by: Jose Abreu
Cc: Carlos Palminha
Cc: Alexey Brodkin
Cc: Ville Syrjälä
Cc: Daniel Vetter
Cc: Dave Airlie
Cc: Andrzej Hajda
Cc: Archit
ode loops
through all the connector's encodersXbridgesXcrtcs and calls the
callback.
If at least a valid encoderXbridgeXcrtc combination is found which
accepts the mode then the function returns MODE_OK.
Signed-off-by: Jose Abreu
Cc: Carlos Palminha
Cc: Alexey Brodkin
Cc: Ville Syrjä
Introduce a new helper function which calls mode_valid() callback
for all bridges in an encoder chain.
Signed-off-by: Jose Abreu
Cc: Carlos Palminha
Cc: Alexey Brodkin
Cc: Ville Syrjälä
Cc: Daniel Vetter
Cc: Dave Airlie
Cc: Andrzej Hajda
Cc: Archit Taneja
---
drivers/gpu/drm/drm_bridge.c
omponents.
Signed-off-by: Jose Abreu
Cc: Carlos Palminha
Cc: Alexey Brodkin
Cc: Ville Syrjälä
Cc: Daniel Vetter
Cc: Dave Airlie
Cc: Andrzej Hajda
Cc: Archit Taneja
---
Changes v1->v2:
- Removed call to connector->mode_valid (Ville, Daniel)
- Change function name (Ville
Hi Laurent,
On 12-05-2017 10:35, Laurent Pinchart wrote:
> Hi Jose,
>
> Thank you for the patch.
>
> On Tuesday 09 May 2017 18:00:12 Jose Abreu wrote:
>> This changes the connector probe helper function to use the new
>> encoder->mode_valid() and crtc->
Hi Laurent,
Sorry for the late reply.
On 12-05-2017 10:57, Laurent Pinchart wrote:
> Hi Jose,
>
> Thank you for the patch.
>
> On Tuesday 09 May 2017 18:00:15 Jose Abreu wrote:
>> Now that we have a callback to check if crtc supports a given mode
>> we can use it in
Hi Niklas,
On 08-03-2018 10:30, Niklas Cassel wrote:
> These wmb() memory barriers are performed after the last descriptor write,
> and they are followed by enable_dma_transmission()/set_tx_tail_ptr(),
> i.e. a writel() to MMIO register space.
> Since writel() itself performs the equivalent of a w
On 29-11-2018 13:03, David Laight wrote:
> From: Jose Abreu [mailto:jose.ab...@synopsys.com]
>> On 29-11-2018 12:47, David Laight wrote:
>>> From: Jose Abreu
>>>> Sent: 29 November 2018 12:42
>>>>
>>>> Some ARC CPU's do not support unalig
e {get/put}_unaligned() helper instead of plain dereference of
pointer in order to fix this.
Changes from v1:
- Check if buffer is already aligned (David)
- Remove 64 bit mention (Alexey)
Signed-off-by: Jose Abreu
Tested-by: Vitor Soares
Cc: Vineet Gupta
Cc: Alexey Brodkin
Cc: Joao Pinto
Cc: Vitor
On 29-11-2018 14:38, David Laight wrote:
> From: Jose Abreu
>> Sent: 29 November 2018 14:29
>>
>> Some ARC CPU's do not support unaligned loads/stores. Currently, generic
>> implementation of reads{b/w/l}()/writes{b/w/l}() is being used with ARC.
>> This can
On 29-11-2018 14:42, Jose Abreu wrote:
> On 29-11-2018 14:38, David Laight wrote:
>> From: Jose Abreu
>>> Sent: 29 November 2018 14:29
>>>
>>> Some ARC CPU's do not support unaligned loads/stores. Currently, generic
>>> implementation of rea
Hi Corentin,
On 16-05-2018 19:32, Corentin Labbe wrote:
> Hello
>
> The dwmac-sun8i driver is broken in next-20180515, symptom are no RX and TX
> errors as shown by ifconfig:
> eth0: flags=4163 mtu 1500
> inet 192.168.1.204 netmask 255.255.255.0 broadcast 192.168.1.255
> ether
;r=WHDsc6kcWAl4i96Vm5hJ_19IJiuxx_p_Rzo2g-uHDKw&m=TBD6a7UY2VbpPmV9LOW_eHAyg8uPq1ZPDhq93VROTVE&s=4fvOST1HhWmZ4lThQe-dHCJYEXNOwey00BCXOWm8tKo&e=
>
> Signed-off-by: Kees Cook
>
I rather prefer the variables declaration in reverse-tree order,
but thats just a minor pick.
Reviewed-by: Jose Abreu
Thanks
On 02-05-2018 13:36, Kees Cook wrote:
> On Wed, May 2, 2018 at 1:54 AM, Jose Abreu wrote:
>> Hi Kees,
>>
>> On 01-05-2018 22:01, Kees Cook wrote:
>>> In the quest to remove all stack VLAs from the kernel[1], this switches
>>> the "status" stack
> drivers/net/ethernet/freescale/fec_main.c | 8 ++--
> drivers/net/ethernet/marvell/mvmdio.c | 5 +
> drivers/net/ethernet/renesas/sh_eth.c | 11 +++
> drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 5 +
For stmmac:
Reviewed-by
On 24-04-2018 14:17, Luc Van Oostenryck wrote:
> The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
> which is a typedef for an enum type, but the implementation in this
> driver returns an 'int'.
>
> Fix this by returning 'netdev_tx_t' in this driver too.
>
> Signed-off-by: Luc
For -net. Please review!
Cc: Andrew Lunn
Cc: Florian Fainelli
Cc: "David S. Miller"
Cc: Joao Pinto
Jose Abreu (2):
net: phy: Use C45 Helpers in phy_read_status()
net: phy: Use C45 Helpers in PHY_FORCING state
drivers/net/phy/phy.c | 2 +-
include/linux/phy.h | 15
Currently phy_read_status() considers that either the PHY driver has the
read_status() callback or uses the generic callback.
For C45 PHYs we need to use the gen10g_read_status() callback.
Signed-off-by: Jose Abreu
Cc: Andrew Lunn
Cc: Florian Fainelli
Cc: "David S. Miller"
Cc:
When using a C45 PHY that is in PHY_FORCING state we are currently not
taking into account that this kind of PHY has different update_link
functions.
Use the C45 Helpers instead or the driver built-in read_status() helper,
if possible.
Signed-off-by: Jose Abreu
Cc: Andrew Lunn
Cc: Florian
From: Weifeng Voon
Date: Wed, Apr 24, 2019 at 18:17:14
> From: "Voon, Weifeng"
>
> This patch-set is to enable Ethernet controller (DW Ethernet QoS
> and DW Ethernet PCS) with SGMII interface in Elkhart Lake. The
> DW Ethernet PCS is the Physical Coding Sublayer that is between
> Ethernet MAC a
From: Vitor Soares
Date: Mon, Apr 08, 2019 at 11:31:23
> static const struct reset_control_ops axs10x_reset_ops = {
> - .reset = axs10x_reset_reset,
Eugeniy, Alexey,
I think the implementation of this callback is wrong: you should
readl_poll_timeout_atomic() until the reset bit is not cle
, Jose Abreu wrote:
> HDMI audio support was added to the AXS board using an
> I2S cpu driver and a custom platform driver.
>
> The platform driver supports two channels @ 16 bits with
> rates 32k, 44.1k and 48k.
>
> Although the mainline I2S driver uses ALSA DMA engine,
> this
rquette
Cc: Stephen Boyd
Cc: Alexey Brodkin
Cc: Vineet Gupta
Cc: linux-snps-...@lists.infradead.org
Cc: devicet...@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-...@vger.kernel.org
Jose Abreu (2):
clk/axs10x: Add I2S PLL clock driver
arc: axs10x: Add DT bindings for I2S PLL Clock
rate.
Signed-off-by: Jose Abreu
---
Changes v5 -> v6:
* Use parent clock to determine PLL input rate instead of using hardcoded values
* Documentation update (added 'clocks' field)
Changes v4 -> v5:
* Documentation update (as suggested by Alexey Brodkin)
* Changed compatible
Add device tree bindings for AXS10X I2S PLL Clock driver.
Signed-off-by: Jose Abreu
Acked-by: Alexey Brodkin
Acked-by: Vineet Gupta
---
Changes v5 -> v6:
* Added 'clocks' field
This patch was only introduced in v5.
Cc: Carlos Palminha
Cc: Rob Herring
Cc: Pawel Moll
Cc: Mar
Hi Vineet,
On 02-05-2016 10:39, Jose Abreu wrote:
> Add device tree bindings for AXS10X I2S PLL Clock driver.
>
> Signed-off-by: Jose Abreu
> Acked-by: Alexey Brodkin
> Acked-by: Vineet Gupta
> ---
>
> Changes v5 -> v6:
> * Added 'clocks' field
>
>
the reason why this extension was added.
The selection between the use of DMA engine or PIO mode
is detected by declaring or not the interrupt parameters
in the DT and using Kconfig.
Signed-off-by: Jose Abreu
Cc: Carlos Palminha
Cc: Mark Brown
Cc: Liam Girdwood
Cc: Jaroslav Kysela
Cc: Takashi
ad.org
Cc: alsa-de...@alsa-project.org
Cc: devicet...@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Jose Abreu (4):
ASoC: dwc: Add helper functions to disable/enable irqs
ASoC: dwc: Do not use devm_clk_get() if using platform data
ASoC: dwc: Add PIO PCM extension
ASoC: dwc: Ad
A parameter description for the interruptions of the
I2S controller was added. This interrupt parameter
should only be set when I2S does not have DMA support.
Signed-off-by: Jose Abreu
Cc: Carlos Palminha
Cc: Mark Brown
Cc: Liam Girdwood
Cc: Jaroslav Kysela
Cc: Takashi Iwai
Cc: Rob Herring
Helper functions to disable and enable the I2S interrupts were
added. Only the interrupts of the used channels are enabled.
Also, there is no need to enable irqs at dw_i2s_config(), they
are already enabled at startup.
Signed-off-by: Jose Abreu
Cc: Carlos Palminha
Cc: Mark Brown
Cc: Liam
When using platform data the devm_clk_get() function is
called causing a probe failure if the clock is not
declared. As we can pass the clock handler by platform
data call only devm_clk_get() when platform data is not
used.
Signed-off-by: Jose Abreu
Cc: Carlos Palminha
Cc: Mark Brown
Cc: Liam
Hi Mark,
Thanks for your comments.
On 24-05-2016 17:41, Mark Brown wrote:
> On Mon, May 23, 2016 at 11:02:24AM +0100, Jose Abreu wrote:
>
>> +config SND_DESIGNWARE_PCM
>> +bool "PCM PIO extension for I2S driver"
> Why can't this be built as a module?
Hi Mark,
On 24-05-2016 18:51, Mark Brown wrote:
> On Tue, May 24, 2016 at 06:07:14PM +0100, Jose Abreu wrote:
>> On 24-05-2016 17:41, Mark Brown wrote:
> Please fix your mail client to word wrap within paragraphs at something
> substantially less than 80 columns. Doing this make
Hi Mark,
On 25-05-2016 11:18, Mark Brown wrote:
> On Wed, May 25, 2016 at 11:11:47AM +0100, Jose Abreu wrote:
>
>> I think I will take the second option. Something like this:
>> "
>> ret = snd_dmaengine_pcm_register(...)
>> if (ret == -EPROBE_DEFER)
Hi all,
Currently I am trying to develop a DRM driver that will use
Xilinx VDMA to transfer video data to a HDMI TX Phy and I am
facing a difficulty regarding the understanding of the DRM DMA
Engine. I looked at several sources and at the DRM core source
but the flow of creating and interfacing wi
This patch updates documentation for the Designware I2S
driver.
Signed-off-by: Jose Abreu
Acked-by: Rob Herring
Cc: Rob Herring
Cc: Carlos Palminha
Cc: Alexey Brodkin
Cc: devicet...@vger.kernel.org
Cc: linux-snps-...@lists.infradead.org
Cc: alsa-de...@alsa-project.org
Cc: linux-kernel
necessary to add this custom platform driver so that
HDMI audio works in AXS boards.
The selection between the use of DMA engine or PIO mode
is detected by declaring or not the DMA parameters in
the device tree.
Signed-off-by: Jose Abreu
Cc: Carlos Palminha
Cc: Mark Brown
Cc: Liam Girdwood
Cc
c: Takashi Iwai
Cc: Rob Herring
Cc: Alexey Brodkin
Cc: linux-snps-...@lists.infradead.org
Cc: alsa-de...@alsa-project.org
Cc: devicet...@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Jose Abreu (2):
ASoC: dwc: Add custom PCM driver
ASoC: dwc: Update DOCUMENTATION for I2S Driver
.../devi
Hi Mark,
Sorry. Follows bellow.
On 27-04-2016 11:05, Jose Abreu wrote:
> This patch updates documentation for the Designware I2S
> driver.
>
> Signed-off-by: Jose Abreu
> Acked-by: Rob Herring
> Cc: Rob Herring
> Cc: Carlos Palminha
> Cc: Alexey Brodkin
> Cc: devi
Hi Stephen,
On 20-04-2016 02:54, Stephen Boyd wrote:
> On 04/19, Jose Abreu wrote:
>> @Stephen: can you give some input so that I can submit a v6?
>>
> I don't prefer putting the second register in the same DT node,
> but that's really up to the DT reviewers
Hi Alexey,
On 20-04-2016 17:12, Alexey Brodkin wrote:
> Hi Jose, Stephen,
>
> On Wed, 2016-04-20 at 10:47 +0100, Jose Abreu wrote:
>> Hi Stephen,
>>
>>
>> On 20-04-2016 02:54, Stephen Boyd wrote:
>>> On 04/19, Jose Abreu wrote:
>>>> @Step
Hi Alexey,
On 21-04-2016 13:18, Alexey Brodkin wrote:
> Hi Jose,
>
> On Thu, 2016-04-21 at 10:51 +0100, Jose Abreu wrote:
>> Hi Alexey,
>
>>>>> Otherwise, I still prefer two DTS files for the two different FPGA
>>>>> versions. At the least, pl
sted by Vineet Gupta)
Changes v2 -> v3:
* Implemented recalc_rate
Changes v1 -> v2:
* Renamed folder to axs10x (as suggested by Alexey Brodkin)
* Added more supported rates
Jose Abreu (2):
clk/axs10x: Add I2S PLL clock driver
arc: axs10x: Add DT bindings for I2S PLL Clock
.../binding
rate.
Signed-off-by: Jose Abreu
---
Changes v5 -> v6:
* Use parent clock to determine PLL input rate instead of using hardcoded values
* Documentation update (added 'clocks' field)
Changes v4 -> v5:
* Documentation update (as suggested by Alexey Brodkin)
* Changed compatible
Add device tree bindings for AXS10X I2S PLL Clock driver.
Signed-off-by: Jose Abreu
---
Changes v5 -> v6:
* Added 'clocks' field
This patch was only introduced in v5.
arch/arc/boot/dts/axs10x_mb.dtsi | 13 +
1 file changed, 13 insertions(+)
diff --git a/arch
Adding device tree mailing list and Rob Herring.
On 21-04-2016 18:19, Jose Abreu wrote:
> The ARC SDP I2S clock can be programmed using a
> specific PLL.
>
> This patch has the goal of adding a clock driver
> that programs this PLL.
>
> At this moment the rate values are h
Adding device tree mailing list and Rob Herring.
On 21-04-2016 18:19, Jose Abreu wrote:
> Add device tree bindings for AXS10X I2S PLL Clock driver.
>
> Signed-off-by: Jose Abreu
> ---
>
> Changes v5 -> v6:
> * Added 'clocks' field
>
> This patch was only
gested by Alexey Brodkin)
* Removed defconfigs entries (as suggested by Alexey Brodkin)
NOTE:
Although the mainline I2S driver uses ALSA DMA engine,
this controller can be built without DMA support so it
was necessary to add this custom platform driver so that
HDMI audio works in AXS boards.
Jose
This patch makes Designware I2S driver use the fifo
depth value to program the fifo configuration register
instead of using hardcoded values.
Signed-off-by: Jose Abreu
---
This patch was only introduced in v4.
sound/soc/dwc/designware_i2s.c | 9 +++--
1 file changed, 7 insertions(+), 2
necessary to add this custom platform driver so that
HDMI audio works in AXS boards.
The selection between the use of DMA engine or custom
PCM can be made using a device tree boolean parameter
which was introduced in this patch ('snps,use-dmaengine').
Signed-off-by: Jose Abreu
---
This patch updates documentation for the Designware I2S
driver.
Signed-off-by: Jose Abreu
---
This patch was only introduced in v4.
Documentation/devicetree/bindings/sound/designware-i2s.txt | 5 +
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound
alogdevicesinc/linux/
The audio can be disabled using menu-config and/or device tree
so it is possible to use only video mode. The audio
(when enabled) registers as a codec into ALSA.
SPDIF DAI format was also added to ASoC as it is required
by adv7511 audio.
Signed-off-by: Jose Abreu
---
adding of audio
support.
Signed-off-by: Jose Abreu
---
No changes v3 -> v4.
This patch was only introduced in v3.
drivers/gpu/drm/i2c/Kconfig| 6 +---
drivers/gpu/drm/i2c/Makefile | 2 +-
drivers/gpu/drm/i2c/adv7511/Kconfig|
Hi Mark,
On 07-04-2016 18:53, Mark Brown wrote:
> On Thu, Apr 07, 2016 at 05:53:59PM +0100, Jose Abreu wrote:
>
>> + Optional properties:
>> + - snps,use-dmaengine: If set the driver will use ALSA DMA engine. If set
>> + it is required to use the properties 'dma
Hi Lars,
On 08-04-2016 16:52, Lars-Peter Clausen wrote:
> On 04/08/2016 12:06 PM, Jose Abreu wrote:
>> Hi Mark,
>>
>>
>> On 07-04-2016 18:53, Mark Brown wrote:
>>> On Thu, Apr 07, 2016 at 05:53:59PM +0100, Jose Abreu wrote:
>>>
>>>> + Opt
Hi Lars,
On 08-04-2016 16:46, Lars-Peter Clausen wrote:
> On 04/07/2016 06:53 PM, Jose Abreu wrote:
>> This patch adds audio support for the ADV7511 HDMI transmitter
>> using ALSA SoC.
>>
>> The code was ported from Analog Devices linux tree from
>> commit 177
Hi Lars,
On 09-04-2016 15:55, Lars-Peter Clausen wrote:
> On 04/08/2016 06:08 PM, Jose Abreu wrote:
>> Hi Lars,
>>
>>
>> On 08-04-2016 16:52, Lars-Peter Clausen wrote:
>>> On 04/08/2016 12:06 PM, Jose Abreu wrote:
>>>> Hi Mark,
>>>>
&
Hi Lars,
On 09-04-2016 16:02, Lars-Peter Clausen wrote:
> On 04/08/2016 06:12 PM, Jose Abreu wrote:
> [...]
>>> [...]
>>>> +- adi,enable-audio: If set the ADV7511 driver will register a codec
>>>> interface
>>>> + into ALSA SoC.
>>>
rate.
Signed-off-by: Jose Abreu
---
Changes v3 -> v4:
* Added binding document (as suggested by Stephen Boyd)
* Minor code style fixes (as suggested by Stephen Boyd)
* Use ioremap (as suggested by Stephen Boyd)
* Implement round_rate (as suggested by Stephen Boyd)
* Change to platform driver
Hi Lars,
On 11-04-2016 10:33, Lars-Peter Clausen wrote:
> On 04/11/2016 11:27 AM, Jose Abreu wrote:
>> Hi Lars,
>>
>>
>> On 09-04-2016 16:02, Lars-Peter Clausen wrote:
>>> On 04/08/2016 06:12 PM, Jose Abreu wrote:
>>> [...]
>>>>> [...
Hi Laurent,
On 04-04-2016 22:41, Laurent Pinchart wrote:
> Hi Jose,
>
> On Monday 04 Apr 2016 10:05:39 Jose Abreu wrote:
>> On 01-04-2016 18:10, Laurent Pinchart wrote:
>>> On Monday 28 Mar 2016 15:36:09 Jose Abreu wrote:
>>>> This patch adds audio supp
alogdevicesinc/linux/
The audio can be disabled using menu-config so it is possible
to use only video mode. The audio (when enabled) registers as
a codec into ALSA.
SPDIF DAI format was also added to ASoC as it is required
by adv7511 audio.
Signed-off-by: Jose Abreu
---
.../bindings/display/br
ine
* Dropped IRQ handler for I2S
Changes v1 -> v2:
* DT bindings moved to separate patch (as suggested by Alexey Brodkin)
* Removed defconfigs entries (as suggested by Alexey Brodkin)
Jose Abreu (3):
drm/i2c/adv7511: Rename and move to separate folder
drm/i2c/adv7511: Add audio support
ASo
There is no need to unmask all interrupts at I2S start. This
can cause performance issues in slower platforms.
Unmask only the interrupts for the used channels.
Signed-off-by: Jose Abreu
---
Changes v2 -> v3:
* Dropped custom platform driver, using now ALSA DMA engine
* Dropped IRQ handler
adding of audio
support.
Signed-off-by: Jose Abreu
---
This patch was only introduced in v3.
drivers/gpu/drm/i2c/Kconfig| 6 +---
drivers/gpu/drm/i2c/Makefile | 2 +-
drivers/gpu/drm/i2c/adv7511/Kconfig| 6
drivers/gpu/drm/i2c
Hi Stephen,
On 16-04-2016 00:46, Stephen Boyd wrote:
> On 04/11, Jose Abreu wrote:
>> new file mode 100644
>> index 000..3ba4e2f
>> --- /dev/null
>> +++ b/drivers/clk/axs10x/i2s_pll_clock.c
>> @@ -0,0 +1,217 @@
>> +
>> +static int i
1 - 100 of 807 matches
Mail list logo
