f-by: Christian Hewitt
---
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 12
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index 70325b2..dd12e02 100644
--- a/arch/arm64/boot/dts/aml
On 9 Nov 2018, at 1:29 pm, Andreas Färber wrote:
>
>> Smartlabs LLC are a professional integrator of Interactive TV solutions
>> and IPTV/VOD devices (https://www.smartlabs.tv/en/about/).
>>
>> Signed-off-by: Christian Hewitt
>> ---
>> Documentation/devi
On 15 Oct 2018, at 9:07 pm, Jerome Brunet wrote:
>
> On Sat, 2018-10-13 at 18:08 +0200, Michael Turquette wrote:
>> Quoting Christian Hewitt (2018-10-13 12:04:46)
>>> On the Khadas VIM2 (GXM) and LePotato (GXL) board there are problems
>>> with reboot; e.g. a ~6
Smartlabs are a professional integrator of Interactive TV solutions
and IPTV/VOD devices.
[1] (https://www.smartlabs.tv/en/about/)
Signed-off-by: Christian Hewitt
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation
front panel
1x reset button on the front panel
HDMI 2.0 (4k@60p) video
Composite video + 2-channel audio output on 3.5mm jack
S/PDIF audio output
Single DVB-S tuner (AVL6762/MxL608)
2x USB 2.0 ports
1x micro SD card slot
UART pins (internal)
Signed-off-by: Christian Hewitt
---
Documentation
accessed after opening the case; soldered pins exist
Signed-off-by: Christian Hewitt
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts | 327 +
2 files changed, 328 insertions(+)
create mode 100644 arch/arm64
front panel
1x reset button on the front panel
HDMI 2.0 (4k@60p) video
Composite video + 2-channel audio output on 3.5mm jack
S/PDIF audio output
Single DVB-S tuner (AVL6762/MxL608)
2x USB 2.0 ports
1x micro SD card slot
UART pins (internal)
Signed-off-by: Christian Hewitt
---
Documentation
Smartlabs are a professional integrator of Interactive TV solutions
and IPTV/VOD devices.
[1] (https://www.smartlabs.tv/en/about/)
Signed-off-by: Christian Hewitt
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation
This series adds new bindings and a device-tree file for the Smartlabs
SML-5442TW set-top box.
v2 - removed audio nodes
- changes soundcard name to "meson-gx-audio"
- added missing uart-has-rtscts;
Christian Hewitt (3):
dt-bindings: Add vendor prefix for Smartlabs
dt-bin
accessed after opening the case; soldered pins exist
Signed-off-by: Christian Hewitt
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts | 316 +
2 files changed, 317 insertions(+)
create mode 100644 arch/arm64
This series adds new bindings and a device-tree file for the Smartlabs
SML-5442TW set-top box.
v3 - change to Smartlabs LLC
- removed sound node
v2 - removed audio nodes
- changes soundcard name to "meson-gx-audio"
- added missing uart-has-rtscts;
Christian Hewitt (3):
d
accessed after opening the case; soldered pins exist
Signed-off-by: Christian Hewitt
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts | 292 +
2 files changed, 293 insertions(+)
create mode 100644 arch/arm64
Smartlabs LLC are a professional integrator of Interactive TV solutions
and IPTV/VOD devices (https://www.smartlabs.tv/en/about/).
Signed-off-by: Christian Hewitt
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation
front panel
1x reset button on the front panel
HDMI 2.0 (4k@60p) video
Composite video + 2-channel audio output on 3.5mm jack
S/PDIF audio output
Single DVB-S tuner (AVL6762/MxL608)
2x USB 2.0 ports
1x micro SD card slot
UART pins (internal)
Signed-off-by: Christian Hewitt
---
Documentation
e as critical to ensure
nothing can disable it.
Signed-off-by: Christian Hewitt
---
drivers/clk/meson/gxbb.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index 86d3ae5..4c8925d 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meso
a kernel
patch to drivers/bluetooth/btbcm.c so 0x2209 loads BCM43438A1 or the
BCM43438A1.hcd firmware must be renamed to BCM43430A1.hcd.
Signed-off-by: Christian Hewitt
---
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 7 +++
1 file changed, 7 insertions(+)
diff --git a/arch
Add the board bindings for the ODROID-HC4 device.
Signed-off-by: Christian Hewitt
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml
b/Documentation/devicetree/bindings/arm/amlogic.yaml
in my amlogic-5.11.y dev branch [1].
For reference, here's dmesg from LibreELEC on 5.11-rc5 [2].
[0]
https://patchwork.ozlabs.org/project/linux-mtd/patch/20201220224314.2659-1-andr...@rammhold.de/
[1] https://github.com/chewitt/linux/commits/amlogic-5.11.y
[2] http://ix.io/2NCi
Christian
Sort the Makefile before adding new SM1 devices.
Signed-off-by: Christian Hewitt
---
arch/arm64/boot/dts/amlogic/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/Makefile
b/arch/arm64/boot/dts/amlogic/Makefile
index dce41cd3f347
ODROID-HC4 is a derivative of the C4 with minor differences:
- 128MB SPI-NOR flash
- 2x SATA ports via ASM1061 PCIe to SATA controller
- 7-pin header with SPI and I2C for 1-inch OLED display and RTC
- 1x USB 2.0 host port
Signed-off-by: Christian Hewitt
---
arch/arm64/boot/dts/amlogic/Makefile
Convert the ODRIOD-C4 dts to meson-sm1-odroid.dtsi and C4 board dts in
preparation for adding additional C4 family boards.
Signed-off-by: Christian Hewitt
---
.../boot/dts/amlogic/meson-sm1-odroid-c4.dts | 427 +
.../boot/dts/amlogic/meson-sm1-odroid.dtsi| 441
Sort the bindings before adding new SM1 devices.
Signed-off-by: Christian Hewitt
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml
b/Documentation/devicetree/bindings
> On 29 Jan 2021, at 10:51 am, Christian Hewitt
> wrote:
>
> ODROID-HC4 is a derivative of the C4 with minor differences:
>
> - 128MB SPI-NOR flash
^ should be 16MB, I forgot to amend. I can send a v2 series if needed.
HC4:~ # dmesg | grep spi
[0.453235] spi-nor
rammhold.de/
[1] https://github.com/chewitt/linux/commits/amlogic-5.11.y
[2] http://ix.io/2NCi
Christian Hewitt (5):
dt-bindings: arm: amlogic: sort SM1 bindings
arm64: dts: meson: sort Amlogic dtb Makefile
arm64: dts: meson: convert meson-sm1-odroid-c4 to dtsi
dt-bindings: arm: amlogic:
Sort the Makefile before adding new SM1 devices.
Signed-off-by: Christian Hewitt
Acked-by: Neil Armstrong
---
arch/arm64/boot/dts/amlogic/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/Makefile
b/arch/arm64/boot/dts/amlogic/Makefile
Add the board bindings for the ODROID-HC4 device.
Signed-off-by: Christian Hewitt
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml
b/Documentation/devicetree/bindings/arm/amlogic.yaml
Convert the ODROID-C4 dts to meson-sm1-odroid.dtsi and C4 board dts in
preparation for adding additional C4 family boards.
Signed-off-by: Christian Hewitt
Reviewed-by: Neil Armstrong
---
.../boot/dts/amlogic/meson-sm1-odroid-c4.dts | 427 +
.../boot/dts/amlogic/meson-sm1
ODROID-HC4 is a derivative of the C4 with minor differences:
- 16MB XT25F128B SPI-NOR flash
- 2x SATA ports via ASM1061 PCIe to SATA controller
- 7-pin header with SPI and I2C for 1-inch OLED display and RTC
- 1x USB 2.0 host port
Signed-off-by: Christian Hewitt
Reviewed-by: Neil Armstrong
Sort the bindings before adding new SM1 devices.
Signed-off-by: Christian Hewitt
Acked-by: Neil Armstrong
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml
b
Add a keymap and bindings for the simple IR (NEC) remote used with
Minix 'NEO' branded Android STB devices.
Signed-off-by: Christian Hewitt
---
.../devicetree/bindings/media/rc.yaml | 1 +
drivers/media/rc/keymaps/Makefile | 1 +
drivers/media/rc/keymaps/rc-m
headphone output
- 3x USB 2.0 ports (1x OTG)
- IR receiver
- 1x Power LED (white)
- 1x Power button (rear)
- 1x Update/Reset button (underside)
- 1x micro SD card slot
Tested-by: Wes Bradley
Signed-off-by: Christian Hewitt
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../dts/amlogic
The Minix NEO U9-H is a small form-factor Android STB based on the
Amlogic Q200 reference board with an S912-H chip.
Signed-off-by: Christian Hewitt
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm
Sort the bindings before adding new SM1 devices.
Signed-off-by: Christian Hewitt
Acked-by: Neil Armstrong
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml
b
Sort the Makefile before adding new SM1 devices.
Signed-off-by: Christian Hewitt
Acked-by: Neil Armstrong
---
arch/arm64/boot/dts/amlogic/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/Makefile
b/arch/arm64/boot/dts/amlogic/Makefile
Convert the ODROID-C4 dts to meson-sm1-odroid.dtsi and C4 board dts in
preparation for adding additional C4 family boards.
Signed-off-by: Christian Hewitt
Reviewed-by: Neil Armstrong
---
.../boot/dts/amlogic/meson-sm1-odroid-c4.dts | 427 +
.../boot/dts/amlogic/meson-sm1
ODROID-HC4 is a derivative of the C4 with minor differences:
- 16MB XT25F128B SPI-NOR flash
- 2x SATA ports via ASM1061 PCIe to SATA controller
- 7-pin header with SPI and I2C for 1-inch OLED display and RTC
- 1x USB 2.0 host port
Signed-off-by: Christian Hewitt
Reviewed-by: Neil Armstrong
Add the board bindings for the ODROID-HC4 device.
Signed-off-by: Christian Hewitt
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml
b/Documentation/devicetree/bindings/arm/amlogic.yaml
g/project/linux-mtd/patch/20201220224314.2659-1-andr...@rammhold.de/
[1] https://github.com/chewitt/linux/commits/amlogic-5.11.y
[2] http://ix.io/2NCi
Christian Hewitt (5):
dt-bindings: arm: amlogic: sort SM1 bindings
arm64: dts: meson: sort Amlogic dtb Makefile
arm64: dts: meson: convert m
> On 2 Feb 2021, at 4:42 am, Kevin Hilman wrote:
>
> Hi Christian,
>
> Christian Hewitt writes:
>
>> This series fixes minor sort-order issues in the Amlogic bindings yaml and
>> dtb Makefile, then converts the existing ODROID-C2 dts into dtsi so we can
>>
ks on bindings from Rob as these did not change.
v4 - rebased against Kevin's v5.8/dt64 branch
v3 - amend author full-name on bindings patch
[1] https://patchwork.kernel.org/patch/11497105/
[2] https://patchwork.kernel.org/project/linux-amlogic/list/?series=273483
Christian Hewitt (5):
- 2x USB 3.0 ports
- IR receiver
- 1x micro SD card slot
Signed-off-by: Christian Hewitt
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../boot/dts/amlogic/meson-g12b-gtking.dts| 145 ++
2 files changed, 146 insertions(+)
create mode 100644 arch/arm64/boot/dts
Convert the Ugoos AM6 dts into meson-g12b-w400.dtsi, and then create
a new AM6 dts that references it. This is in preparation for several
new G12B devices that will share the common w400 dtsi.
Signed-off-by: Christian Hewitt
---
.../boot/dts/amlogic/meson-g12b-ugoos-am6.dts | 375
The Shenzen AZW (Beelink) GT-King Pro is based on the Amlogic W400 reference
board with an S922X chip.
Acked-by: Rob Herring
Signed-off-by: Christian Hewitt
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree
The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference
board with an S922X chip.
Acked-by: Rob Herring
Signed-off-by: Christian Hewitt
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings
USB 3.0 ports
- IR receiver
- 1x micro SD card slot
- 1x Power on/off button
Signed-off-by: Christian Hewitt
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../dts/amlogic/meson-g12b-gtking-pro.dts | 125 ++
2 files changed, 126 insertions(+)
create mode 100644
Enable the onboard pcf8563 rtc hardware on ODROID N2/N2+ boards via the
common dtsi. Also add aliases to ensure vrtc does not claim /dev/rtc0.
Signed-off-by: Christian Hewitt
---
.../boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 14 ++
1 file changed, 14 insertions(+)
diff --git
The Shenzen AZW (Beelink) GS-King-X is based on the Amlogic W400 reference
board with an S922X-H chip.
Signed-off-by: Christian Hewitt
Acked-by: Rob Herring
Reviewed-by: Martin Blumenstingl
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
1 file changed, 1 insertion(+)
diff
RT6862 audio amps
- Analogue headphone output
- 1x USB 2.0 OTG port
- 3x USB 3.0 ports
- IR receiver
- 1x micro SD card slot (internal)
- USB SATA controller with 2x 3.5" drive bays
- 1x Power on/off button
Signed-off-by: Christian Hewitt
Acked-by: Martin Blumenstingl
Tested-by: Neil Arms
m TDM_B to TDM_A
- drop S/PDIF content
- add Rob's bindings ack
Christian Hewitt (2):
dt-bindings: arm: amlogic: add support for the Beelink GS-King-X
arm64: dts: meson: add initial Beelink GS-King-X device-tree
.../devicetree/bindings/arm/amlogic.yaml | 1 +
arch/arm64/boot/dts/a
This series adds bindings and device-tree for the Beelink (AZW) GS-King-X,
which like GT-King and GT-King Pro is based on the W400 reference design.
Changes since v1:
- move audio from TDM_B to TDM_A
- drop S/PDIF content
- add Rob's bindings ack
Christian Hewitt (2):
dt-bindings: arm: am
RT6862 audio amps
- Analogue headphone output
- 1x USB 2.0 OTG port
- 3x USB 3.0 ports
- IR receiver
- 1x micro SD card slot (internal)
- USB SATA controller with 2x 3.5" drive bays
- 1x Power on/off button
Signed-off-by: Christian Hewitt
---
arch/arm64/boot/dts/amlogic/Makefile
The Shenzen AZW (Beelink) GS-King-X is based on the Amlogic W400 reference
board with an S922X-H chip.
Signed-off-by: Christian Hewitt
Acked-by: Rob Herring
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree
> On 31 Dec 2020, at 4:23 am, Martin Blumenstingl
> wrote:
>
> On Wed, Dec 30, 2020 at 11:38 AM Christian Hewitt
> wrote:
>>
>> The Shenzen AZW (Beelink) GS-King-X is based on the Amlogic W400 reference
>> board with an S922X-H chip.
>>
>> -
Add keymaps and bindings for the simple IR (NEC) remotes used with
the MeCool KII-Pro and MeCool KIII-Pro Android STB devices.
Tested-by: Drazen Spio
Signed-off-by: Christian Hewitt
---
.../devicetree/bindings/media/rc.yaml | 2 +
drivers/media/rc/keymaps/Makefile | 2
ssues.
[0] https://forum.libreelec.tv/thread/23590-nightbuild-on-mecool-kiii-pro/
Christian Hewitt (3):
dt-bindings: arm: amlogic: add MeCool KII/KIII Pro bindings
arm64: dts: meson: add initial device-tree for MeCool KII Pro
arm64: dts: meson: add initial device-tree for MeCool KIII Pro
.../
optical output
- CVBS/Analogue output
- 4x USB 2.0 ports
- IR receiver
- 1x Power button (with integrated blue LED)
- 1x micro SD card slot
Tested-by: Drazen Spio
Signed-off-by: Christian Hewitt
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../meson-gxl-s905d-mecool-kii-pro.dts
optical output
- CVBS/Analogue output
- 4x USB 2.0 ports
- IR receiver
- 1x Power button (with integrated blue LED)
- 1x Update/Reset button (underside)
- 1x micro SD card slot
Tested-by: Drazen Spio
Signed-off-by: Christian Hewitt
---
arch/arm64/boot/dts/amlogic/Makefile | 1
Add the board bindings for the MeCool (Videostrong Technology Co., Ltd)
KII-Pro (S905D) and KIII-Pro (S912) devices.
Signed-off-by: Christian Hewitt
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm
This series cleans-up and submits some minor patches used in HardKernel
Linux 5.10 and 5.11 images for the ODROID N2/N2+, and fixes a stray tab.
Christian Hewitt (1):
arm64: dts: meson: remove extra tab from ODROID N2/N2+ ext_mdio node
Hyeonki Hong (2):
arm64: dts: meson: add saradc node to
From: Hyeonki Hong
Add GPIO line-name identifiers to the ODROID N2/N2+ common dtsi.
Signed-off-by: Hyeonki Hong
---
.../dts/amlogic/meson-g12b-odroid-n2.dtsi | 45 +++
1 file changed, 45 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
b/ar
From: Hyeonki Hong
Add the meson saradc node to the ODROID N2/N2+ common dtsi.
Signed-off-by: Hyeonki Hong
---
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 4
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
b/arch/arm64/boot/
Remove an extra tab from the ext_mdio node in the ODROID N2/N2+ common
dtsi file.
Signed-off-by: Christian Hewitt
---
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
ilman/v5.13/dt64
Christian Hewitt (1):
arm64: dts: meson: remove extra tab from ODROID N2/N2+ ext_mdio node
Hyeonki Hong (2):
arm64: dts: meson: add saradc node to ODROID N2/N2+
arm64: dts: meson: add GPIO line names to ODROID N2/N2+
.../dts/amlogic/meson-g12b-odroid-n2.dtsi
From: Hyeonki Hong
Add the meson saradc node to the ODROID N2/N2+ common dtsi.
Signed-off-by: Hyeonki Hong
Signed-off-by: Christian Hewitt
---
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 5 +
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b
From: Hyeonki Hong
Add GPIO line-name identifiers to the ODROID N2/N2+ common dtsi.
Signed-off-by: Hyeonki Hong
Signed-off-by: Christian Hewitt
Reviewed-by: Neil Armstrong
---
.../dts/amlogic/meson-g12b-odroid-n2.dtsi | 45 +++
1 file changed, 45 insertions(+)
diff
Remove an extra tab from the ext_mdio node in the ODROID N2/N2+ common
dtsi file.
Signed-off-by: Christian Hewitt
Reviewed-by: Neil Armstrong
Reviewed-by: Martin Blumenstingl
---
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff
Add the board bindings for the MeCool (Videostrong Technology Co., Ltd)
KII-Pro (S905D) and KIII-Pro (S912) devices.
Signed-off-by: Christian Hewitt
Acked-by: Rob Herring
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation
ssues.
[0] https://forum.libreelec.tv/thread/23590-nightbuild-on-mecool-kiii-pro/
Changes since v1:
- Rebased on khilman/v5.13/dt64
- Add ack on bindings from Rob
- Add reviewed-by(s) from Neil
Christian Hewitt (3):
dt-bindings: arm: amlogic: add MeCool KII/KIII Pro bindings
arm64: dts:
optical output
- CVBS/Analogue output
- 4x USB 2.0 ports
- IR receiver
- 1x Power button (with integrated blue LED)
- 1x micro SD card slot
Tested-by: Drazen Spio
Signed-off-by: Christian Hewitt
Reviewed-by: Neil Armstrong
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../meson-gxl-s905d
optical output
- CVBS/Analogue output
- 4x USB 2.0 ports
- IR receiver
- 1x Power button (with integrated blue LED)
- 1x Update/Reset button (underside)
- 1x micro SD card slot
Tested-by: Drazen Spio
Signed-off-by: Christian Hewitt
Reviewed-by: Neil Armstrong
---
arch/arm64/boot/dts/amlogic
This remote ships with the Amlogic SML-5442TW IPTV/VOD Set-tob Box [0]
used by O2.cz. This keymap adds support for the default IR controls.
Signed-off-by: Christian Hewitt
---
drivers/media/rc/keymaps/Makefile | 1 +
drivers/media/rc/keymaps/rc-khamsin.c | 75
:54
UTC (1606727814)
Signed-off-by: Christian Hewitt
---
.../boot/dts/amlogic/meson-g12b-gtking-pro.dts | 17 +
.../boot/dts/amlogic/meson-g12b-gtking.dts | 18 ++
2 files changed, 35 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking
valds/linux/commit/6eeaf4d2452ec8b1ece58776812140734fc2e088
Signed-off-by: Christian Hewitt
---
arch/arm64/boot/dts/amlogic/meson-gxm.dtsi | 20
1 file changed, 20 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
b/arch/arm64/boot/dts/amlogic/meson-gxm
read the hardware clock
[3.852632] rtc-hym8563 0-0051: no valid clock/calendar values available
Signed-off-by: Christian Hewitt
---
arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson
From: Artem Lapkin
The max frequency for the w25q32 (VIM v1.2) and w25q128 (VIM v1.4) spifc
chip should be 104Mhz not 30MHz.
Fixes: b8b74dda3908 ("ARM64: dts: meson-gxm: Add support for Khadas VIM2")
Signed-off-by: Artem Lapkin
---
This change was previously submitted as [0] which has style iss
Update the VIM3/3L common dtsi to use the new function/color bindings.
Suggested-by: Artem Lapkin
Signed-off-by: Christian Hewitt
---
This supersedes a previous submission from Art [0] and uses the updated
LED bindings suggested by Neil.
[0]
https://patchwork.kernel.org/project/linux-amlogic
This remote ships with the Amlogic SML-5442TW IPTV/VOD Set-Top Box
used by O2.cz. This keymap adds support for the default IR controls.
Signed-off-by: Christian Hewitt
---
v2 changes:
- added rc.yaml bindings
- fixed typos and removed stray URL reference
.../devicetree/bindings/media/rc.yaml
Set the IR keymap to the KHAMSIN remote shipped with the SML5442TW.
Signed-off-by: Christian Hewitt
---
The rc-khamsin keymap is queued (or in the process of being picked) via the
media tree [0] so it would be nice to add this within the 5.11 cycle.
[0]
https://patchwork.linuxtv.org/project
Add initial audio support limited to HDMI i2s.
Signed-off-by: Christian Hewitt
Acked-by: Jerome Brunet
---
.../amlogic/meson-gxl-s905x-khadas-vim.dts| 40 +++
1 file changed, 40 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
b/arch
Add initial audio support limited to HDMI i2s.
Signed-off-by: Christian Hewitt
Acked-by: Jerome Brunet
---
.../dts/amlogic/meson-gxbb-nexbox-a95x.dts| 40 +++
1 file changed, 40 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
b/arch/arm64
patches 2,3
- Add Jerome's acks
Changes from v2
- Drop p200/p201/p212-s905x/vega-s95 changes
- Add khadas-vim(1)
Changes from v1
- Drop nexbox-a1 and rbox-pro
Christian Hewitt (7):
arm64: dts: meson: add audio playback to a95x
arm64: dts: meson: add audio playback to khadas-vim
arm64
Add initial audio support limited to HDMI i2s.
Signed-off-by: Christian Hewitt
Acked-by: Jerome Brunet
---
.../boot/dts/amlogic/meson-gxbb-wetek-hub.dts | 40 +++
1 file changed, 40 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
b/arch/arm64
Add initial audio support limited to HDMI i2s.
Signed-off-by: Christian Hewitt
Acked-by: Jerome Brunet
---
.../boot/dts/amlogic/meson-gxbb-odroidc2.dts | 40 +++
1 file changed, 40 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
b/arch/arm64
Add initial support limited to HDMI i2s and SPDIF (LPCM).
Signed-off-by: Christian Hewitt
Acked-by: Jerome Brunet
---
.../dts/amlogic/meson-gxbb-wetek-play2.dts| 61 +++
1 file changed, 61 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
b
Add initial audio support limited to HDMI i2s.
Signed-off-by: Christian Hewitt
Acked-by: Jerome Brunet
---
.../dts/amlogic/meson-gxm-khadas-vim2.dts | 40 +++
1 file changed, 40 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
b/arch/arm64
Add initial audio support limited to HDMI i2s.
Signed-off-by: Christian Hewitt
Acked-by: Jerome Brunet
---
.../boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 40 +++
1 file changed, 40 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
b/arch/arm64
Reorder the VIM/VIM2 includes/bindings to follow the format of other dts
in the Amlogic tree and remove a stray empty line in the VIM2 dts.
Signed-off-by: Christian Hewitt
---
This patch depends on the v4 "arm64: dts: meson: add more GX soundcards" series
[0]
being merged first.
/alsa-configuration.rst#common-parameters-for-top-sound-card-modules
Signed-off-by: Christian Hewitt
---
I've been experimenting with alsa conf files to ensure alsa handles
multi-channel audio properly (else channels are messed up) and it's
been bugging me why an Odroid N2 showed surroundXX device
://patchwork.kernel.org/project/dri-devel/patch/20210121170445.19761-1-lukasz.l...@arm.com/
Signed-off-by: Christian Hewitt
---
I have been using Kodi as my test application. If you scroll in library
views with hundreds of list items and the panfrost values the slow GPU
ramp up is quite noticeable
> On 27 Jan 2021, at 3:11 pm, Lukasz Luba wrote:
>
> On 1/27/21 10:24 AM, Lukasz Luba wrote:
>> Hi Christian,
>> On 1/25/21 8:18 AM, Christian Hewitt wrote:
>>> This patch adapts the panfrost pre-defined thresholds change [0] to the
>>> lima driver
://patchwork.kernel.org/project/dri-devel/patch/20210121170445.19761-1-lukasz.l...@arm.com/
Signed-off-by: Christian Hewitt
---
Change since v1: increased upthreshold from 20 to 30, with a soft
dependency on Lukasz delayed timer patch [0]
[0] https://lore.kernel.org/lkml/20210127105121.20345-1
From: Jonas Karlman
Add a keymap for the pine64 IR remote [0]. The mouse key has been mapped to
KEY_EPG to provide a more useful remote.
[0] http://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg
Signed-off-by: Jonas Karlman
Signed-off-by: Christian Hewitt
---
Changes since
From: Jonas Karlman
Add a keymap for the pine64 IR remote [0]. The mouse key has been mapped to
KEY_EPG to provide a more useful remote.
[0] http://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg
Signed-off-by: Jonas Karlman
Signed-off-by: Christian Hewitt
---
Changes since
Blumenstingle. Add acks on patches 1/2 from Rob Herring.
Christian Hewitt (3):
dt-bindings: Add vendor prefix for Ugoos
dt-bindings: arm: amlogic: Add support for the Ugoos AM6
arm64: dts: meson-g12b-ugoos-am6: add initial device-tree
Documentation/devicetree/bindings/arm/amlogic.yaml | 1
>From c9402f747c02605fd8bf7e6495271edf855476c7 Mon Sep 17 00:00:00 2001
From: Christian Hewitt
Date: Fri, 6 Sep 2019 05:38:48 +0400
Subject: [PATCH v3 2/3] dt-bindings: arm: amlogic: Add support for the Ugoos AM6
The Ugoos AM6 is based on the Amlogic W400 (G12B) reference design using the
S9
: Christian Hewitt
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../boot/dts/amlogic/meson-g12b-ugoos-am6.dts | 557 +
2 files changed, 558 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
diff --git a/arch/arm64/boot/dts
Ugoos Industrial Co., Ltd. are a manufacturer of ARM based TV Boxes/Dongles,
Digital Signage and Advertisement Solutions [0].
[0] (https://ugoos.com)
Acked-by: Rob Herring
Signed-off-by: Christian Hewitt
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2
The Ugoos AM6 is based on the Amlogic W400 (G12B) reference design using the
S922X chipset.
Acked-by: Rob Herring
Signed-off-by: Christian Hewitt
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm
Ugoos Industrial Co., Ltd. are a manufacturer of ARM based TV Boxes/Dongles,
Digital Signage and Advertisement Solutions [0].
[0] (https://ugoos.com)
Acked-by: Rob Herring
Signed-off-by: Christian Hewitt
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2
Blumenstingle. Add acks on patches 1/2 from Rob Herring.
Christian Hewitt (3):
dt-bindings: Add vendor prefix for Ugoos
dt-bindings: arm: amlogic: Add support for the Ugoos AM6
arm64: dts: meson-g12b-ugoos-am6: add initial device-tree
Documentation/devicetree/bindings/arm/amlogic.yaml | 1
1 - 100 of 248 matches
Mail list logo
