Hi Anton,
On Wed, Aug 28, 2013 at 3:27 AM, Anton Vorontsov wrote:
> On Thu, Aug 22, 2013 at 12:45:10AM +0200, Marek Belisko wrote:
>> In twl4030_madc header exist defines for fixed channels
>> + add rx51 specific channels and replace all hardcoded channels
>> values.
>>
>> Signed-off-by: Marek Be
Hi Tomi,
On Fri, Aug 30, 2013 at 9:57 AM, Tomi Valkeinen wrote:
> On 29/08/13 15:35, Marek Belisko wrote:
>> Signed-off-by: H. Nikolaus Schaller
>> Signed-off-by: Marek Belisko
>> ---
>> drivers/video/omap2/displays/panel-generic-dpi.c | 53
>>
>> 1 file changed, 53 i
Hi,
On Tue, Nov 13, 2012 at 12:32 PM, Belisko Marek wrote:
> On Tue, Nov 13, 2012 at 11:11 AM, Ondrej Zary
> wrote:
>> On Monday 12 November 2012, Belisko Marek wrote:
>>> Hi Ondrej,
>>>
>>> On Fri, Nov 9, 2012 at 10:42 PM, Ondrej Zary
>> wrote:
On Mon, Dec 3, 2012 at 8:29 PM, Bryan Wu wrote:
> On Fri, Nov 30, 2012 at 2:00 PM, Marek Belisko
> wrote:
>> Signed-off-by: Marek Belisko
>> ---
>> Documentation/devicetree/bindings/leds/tca6507.txt | 33
>>
>> 1 file changed, 33 insertions(+)
>> create mode 100644 Docu
On Tue, Nov 13, 2012 at 11:11 AM, Ondrej Zary
wrote:
> On Monday 12 November 2012, Belisko Marek wrote:
>> Hi Ondrej,
>>
>> On Fri, Nov 9, 2012 at 10:42 PM, Ondrej Zary
> wrote:
>> > Unify struct ft1000_info between ft1000-usb and ft1000-pcmcia an
CC' Grant & Rob
On Tue, Oct 30, 2012 at 10:42 PM, Marek Belisko
wrote:
> Signed-off-by: Marek Belisko
> ---
> arch/arm/boot/dts/omap3-gta04.dts | 65
> +
> 1 file changed, 65 insertions(+)
> create mode 100644 arch/arm/boot/dts/omap3-gta04.dts
>
> diff --
CC'ing Tony
On Thu, Nov 15, 2012 at 12:59 PM, Grant Likely
wrote:
> On Wed, 14 Nov 2012 21:26:58 +0100, Belisko Marek
> wrote:
>> CC' Grant & Rob
>
> Hi Marek
>
> Since this is an OMAP board, you should send the changes to Tony and
> they should
On Sun, Dec 2, 2012 at 6:51 PM, Ondrej Zary wrote:
> After unifying struct ft1000_info, struct ft1000_device is now wrong name.
> Rename it to ft1000_usb to match its semantics.
>
> Signed-off-by: Ondrej Zary
Reviewed-by: Marek Belisko
> ---
> drivers/staging/ft1000/ft1000-usb/ft1000_debug.c
Hi Alexey,
On Mon, Jun 10, 2013 at 9:29 PM, Alexey Khoroshilov
wrote:
> ft1000dev->tx_urb and ft1000dev->rx_urb are not deallocated
> if something goes wrong in ft1000_probe(). Also there is no
> check for success of urb allocation. The patch fixes the both issues.
>
> By the way, there is no sen
Hi,
I got this today when boot gta04 machine (dts is mostly same as for
beagle-xm) on today's linux-next (with 3.11-rc4 it's not happening):
[4.404602] ==
[4.411102] [ INFO: possible circular locking dependency detected ]
[4.417694]
Dear Paolo Bolzini,
On Mon, Jul 22, 2013 at 2:58 PM, Paolo Bolzoni
wrote:
> Dear kernel list,
> I bought a DVI to VGA adapter[0] hoping to make it work with the
> modules udl or udlfb. The program lsusb does recognize it as a
> DisplayLink:
>
> lsmod output:
> Bus 002 Device 004: ID 17e9:430
On Tue, Jul 23, 2013 at 10:15 AM, Paolo Bolzoni
wrote:
> On Mon, Jul 22, 2013 at 10:07 PM, Belisko Marek
> wrote:
>>> But, it does not matter what of the two modules I have loaded it
>>> seems the kernel does not recognize it
>> Matching is done by VID = 0x17e
Hi All,
On Sat, Aug 10, 2013 at 1:09 PM, Pavel Machek wrote:
> On Fri 2013-08-02 01:43:55, Pavel Machek wrote:
>> On Sun 2013-07-28 15:44:09, Pavel Machek wrote:
>> > On Mon 2013-07-15 01:28:19, Aaro Koskinen wrote:
>> > > Hi,
>> > >
>> > > On Sat, Jul 13, 2013 at 02:17:09PM +0200, Pavel Machek w
Ping. Any objections to that patch?
On Thu, Jan 24, 2013 at 7:34 PM, Marek Belisko
wrote:
> Signed-off-by: Marek Belisko
> ---
> arch/arm/boot/dts/omap3-gta04.dts | 94
> +
> 1 file changed, 94 insertions(+)
> create mode 100644 arch/arm/boot/dts/omap3-gt
On Mon, Aug 6, 2012 at 2:27 AM, Christopher Sacchi
wrote:
> Here is a new patch that should be tested that fixes a function issue
> in the description for the Mac80211 driver in tar.bz2 format.
Please don't send patches as attachment (send in email body). More can
be found in
kernel source: Docume
Hi,
using barebox to boot 3.5 kernel with device tree for pandaboard (A2)
stuck after some seconds. Any ideas?
Log:
bootm -o /boot/omap4-panda.dtb /boot/uImage
Image Name: Linux-3.5.0-01676-g84de33d-dirty
OS: Linux
Architecture: ARM
Type: Kernel Image
Compressi
On Sat, Aug 18, 2012 at 12:55 PM, Kelvin Cheung wrote:
> This adds clock support to Loongson1B SoC using the common clock
> infrastructure.
>
> Signed-off-by: Kelvin Cheung
> ---
> drivers/clk/Makefile |1 +
> drivers/clk/clk-ls1x.c | 108
> +++
On Mon, Nov 26, 2012 at 7:59 AM, Woody Wu wrote:
> Hi, List
>
> I enabled an ax88796 Ethernet driver in the kernel configuration menu.
> Kernel version is 3.4.19. The arch is ARM and the system type is
> Samsung S3C2410.
>
> In my debugging, I found the probe function of the driver did not get
> i
Hi Stephen,
On Thu, Oct 8, 2015 at 3:04 AM, Stephen Rothwell wrote:
> Hi Sebastian,
>
> On Fri, 2 Oct 2015 11:49:32 +1000 Stephen Rothwell
> wrote:
>>
>> On Tue, 29 Sep 2015 11:45:31 +1000 Stephen Rothwell
>> wrote:
>> >
>> > After merging the battery tree, today's linux-next build (arm
>> >
Hi,
On Tue, Oct 13, 2015 at 1:53 AM, Sebastian Reichel wrote:
> Hi,
>
> On Mon, Oct 12, 2015 at 03:20:10PM -0700, Tony Lindgren wrote:
>> * Tony Lindgren [151012 14:43]:
>> > * Belisko Marek [150926 13:02]:
>> > > Tony sorry I forgot to add you to the reci
Adding Tony to CC
On Wed, Oct 21, 2015 at 12:32 AM, Stephen Rothwell
wrote:
> Hi Sebastian,
>
> On Fri, 16 Oct 2015 01:26:39 +1100 Stephen Rothwell
> wrote:
>>
>> On Thu, 8 Oct 2015 12:04:24 +1100 Stephen Rothwell
>> wrote:
>> >
>> > On Fri, 2 Oct 2015 11:49:32 +1000 Stephen Rothwell
>> >
Hello,
I'm trying to fix warning (for omap5 board) produced by recent change
to avoid using IRQ_TYPE_NONE like:
[1.818666] WARNING: CPU: 1 PID: 778 at
drivers/irqchip/irq-gic.c:1016 gic_irq_domain_translate+0x78/0x100
[1.828839] Modules linked in:
I did look to other commit which did upda
Hi Tony,
On Tue, Jul 3, 2018 at 10:45 AM Tony Lindgren wrote:
>
> * Belisko Marek [180620 09:40]:
> > Hello,
> >
> > I'm trying to fix warning (for omap5 board) produced by recent change
> > to avoid using IRQ_TYPE_NONE like:
> > [1.818666] WARNIN
On Thu, Dec 4, 2014 at 10:56 PM, Ray Jui wrote:
> Device tree binding documentation for Broadcom Cygnus pinctrl driver
>
> Signed-off-by: Ray Jui
> Reviewed-by: Scott Branden
> ---
> .../bindings/pinctrl/brcm,cygnus-pinctrl.txt | 92
>
> 1 file changed, 92 insertio
Tomi can you please pick up this series for 3.20 release? Thanks
On Wed, Dec 3, 2014 at 10:33 PM, Marek Belisko wrote:
> changes from v3:
> - use GPL v2 instead GPL
> - fix wrong gpios property name in doc and DT
> - set gpio to NULL if invalid
> - drop unnecessary header
>
> changes from v2:
> -
Ping for input maintainer. DT changes was acked. Thanks.
On Tue, Sep 30, 2014 at 10:17 PM, Marek Belisko wrote:
> This patch adds new parameters that allow to address typical hardware
> design differences: touch screens may be wired or oriented differently
> (portrait or landscape). And usually t
Hi Krzystof,
On Tue, Jan 27, 2015 at 12:30 PM, Krzysztof Kozlowski
wrote:
> The return value of power_supply_register() call was not checked and
> even on error probe() function returned 0. If registering failed then
> during unbind the driver tried to unregister power supply which was not
> actu
+CC Sebastian
On Thu, Apr 30, 2015 at 3:30 PM, Evgeniy Polyakov wrote:
> HI Marek
>
> 28.04.2015, 23:25, "Marek Belisko" :
>> bq2700 slave driver depends on bq27x00-battery driver thus adding this
>> dependency to config. When bq2700 is build as module bq27x00-battery
>> will be loaded automatica
On Mon, Jul 16, 2012 at 10:12 AM, Toshiaki Yamane wrote:
> The below checkpatch warns was fixed,
>
> drivers/staging/cptm1217/clearpad_tm1217.c:400: WARNING: quoted string split
> across lines
> drivers/staging/cptm1217/cp_tm1217.h:5: ERROR: open brace '{' following
> struct go on the same line
On Sat, Jun 6, 2015 at 3:09 PM, Pavel Machek wrote:
> Hi!
>
>> None was ?wonderful?. They were valid concerns about my proposal
>> and I have replied to them how I see it.
>>
>> Generally, if you are not interested in people dedicated and committed to
>> fight for the better solution with (technic
CC-ing author of below reply
On Sat, Jun 6, 2015 at 8:53 PM, Belisko Marek wrote:
> On Sat, Jun 6, 2015 at 3:09 PM, Pavel Machek wrote:
>> Hi!
>>
>>> None was ?wonderful?. They were valid concerns about my proposal
>>> and I have replied to them how I see it.
Hi Sebastian,
On Wed, Feb 26, 2014 at 1:24 AM, Sebastian Reichel wrote:
> Hi,
>
> This is RFCv3 for converting twl4030-madc to the IIO API and
> adding DT support. The patchset compiles and has been tested
> on my Nokia N900.
>
> Changes since RFCv2:
> * Use "--find-renames" for the move from mf
Hi Sebastian,
On Wed, Feb 26, 2014 at 1:46 AM, Sebastian Reichel wrote:
> Update rx51-battery driver to use the new IIO API of
> twl4030-madc and add DT support.
>
> Signed-off-by: Sebastian Reichel
> ---
> drivers/power/rx51_battery.c | 68
> +---
> 1 f
Hi,
ping.
On Mon, Oct 14, 2013 at 11:02 PM, Marek Belisko wrote:
> This patches is adding bypass and acbias functionality to omapdss venc driver.
> In first patch we export updatin bypass and acbias in devconf1 register. Next
> patch
> add handling for updating in venc driver and last patch add
Hi Sebastian,
On Sat, Mar 1, 2014 at 12:22 AM, Sebastian Reichel wrote:
> Hi Marek,
>
> On Fri, Feb 28, 2014 at 11:32:22PM +0100, Belisko Marek wrote:
>> Seems I found issue. I have missing property ti,system-uses-second-madc-irq
>> as original twl4030_madc_battery use
Hi,
On Tue, Mar 4, 2014 at 11:05 PM, Sebastian Reichel wrote:
> Hi,
>
> This is PATCHv2 for converting twl4030-madc to the IIO API and
> adding DT support. The plan is to remove the private twl4030-madc
> API once all users have been removed or converted to the IIO API.
> The patchset compiles an
Hi Sebastian,
On Thu, Mar 6, 2014 at 12:25 AM, Sebastian Reichel wrote:
> Hi Marek,
>
> I just have one comment:
>
> On Wed, Mar 05, 2014 at 09:52:17PM +0100, Marek Belisko wrote:
>> [...]
>> -static int madc_read(int index)
>> +static int madc_read(struct iio_channel *channel)
>> {
>> - str
Hi Sebastian,
On Wed, Feb 26, 2014 at 10:54 PM, Sebastian Reichel wrote:
> Hi,
>
> On Wed, Feb 26, 2014 at 10:43:40PM +0100, Belisko Marek wrote:
>> [...]
>> > + int val, err;
>> > + err = iio_read_channel_average_raw(channel, &val);
>> Wh
Hi Sebastian,
On Fri, Feb 28, 2014 at 3:05 AM, Sebastian Reichel wrote:
> On Thu, Feb 27, 2014 at 10:34:35PM +0100, Belisko Marek wrote:
>> Well I've tried and it's worse :). I got during booting:
>> [2.218383] ERROR: could not get IIO channel /battery:temp(0)
&
On Fri, Feb 28, 2014 at 9:32 PM, Belisko Marek wrote:
> Hi Sebastian,
>
> On Fri, Feb 28, 2014 at 3:05 AM, Sebastian Reichel wrote:
>> On Thu, Feb 27, 2014 at 10:34:35PM +0100, Belisko Marek wrote:
>>> Well I've tried and it's worse :). I got during booting:
&
On Fri, Feb 28, 2014 at 10:08 PM, Sebastian Reichel wrote:
> On Fri, Feb 28, 2014 at 09:32:12PM +0100, Belisko Marek wrote:
>> On Fri, Feb 28, 2014 at 3:05 AM, Sebastian Reichel wrote:
>> > On Thu, Feb 27, 2014 at 10:34:35PM +0100, Belisko Marek wrote:
>> >> Well I
On Fri, Feb 28, 2014 at 10:13 PM, Belisko Marek wrote:
> On Fri, Feb 28, 2014 at 10:08 PM, Sebastian Reichel wrote:
>> On Fri, Feb 28, 2014 at 09:32:12PM +0100, Belisko Marek wrote:
>>> On Fri, Feb 28, 2014 at 3:05 AM, Sebastian Reichel wrote:
>>> > On Thu, Fe
Hi Tony,
On Fri, Feb 28, 2014 at 11:25 PM, Tony Lindgren wrote:
> * Marek Belisko [140125 13:31]:
>
> Hmm care to add descriptions and repost the remaining patches
> that I did not yet pick up for the fixes?
Sure I'll do.
>
>> Signed-off-by: NeilBrown
>
> Hmm should this also have From: NeilBro
Hi,
booting latest 3.14-rc7 on gta04 board gives following warning:
[3.101409] Driver for 1-wire Dallas network protocol.
[3.109649] omap_hdq omap_hdq: OMAP HDQ Hardware Rev 0.5. Driver in
Interrupt mode
[3.330810]
[3.332397] =
[3.33
On Mon, Feb 10, 2014 at 9:54 AM, Dr. H. Nikolaus Schaller
wrote:
> Am 10.02.2014 um 09:27 schrieb Johannes Berg:
>
>> On Fri, 2014-02-07 at 20:48 +0100, Marek Belisko wrote:
>>
>>> +#define RFKILL_TYPE_ALL (0)
>>> +#define RFKILL_TYPE_WLAN(1)
>>> +#define RFKILL_TYPE_BLUETOOTH
On Mon, Feb 10, 2014 at 11:18 AM, Mark Rutland wrote:
> On Fri, Feb 07, 2014 at 07:48:49PM +, Marek Belisko wrote:
>> Signed-off-by: NeilBrown
>> Signed-off-by: Marek Belisko
>> ---
>> Based on Neil's patch and extend for documentation and bindings include.
>>
>> .../bindings/net/rfkill/rfk
Hi Tomi,
On Wed, Feb 12, 2014 at 2:18 PM, Tomi Valkeinen wrote:
> Hi Tero, Christoph,
>
> On 07/02/14 12:12, Christoph Fritz wrote:
>> On Tue, 2014-02-04 at 17:50 +0200, Tero Kristo wrote:
>>> On 01/29/2014 01:21 PM, Christoph Fritz wrote:
> Currently I only analyzed sys_clkout2 (see attachme
Hi Jonathan,
On Tue, Feb 18, 2014 at 11:40 AM, Jonathan Cameron wrote:
> On 14/02/14 14:25, Marek Belisko wrote:
>>
>> Signed-off-by: Marek Belisko
>
> I wonder how this got missed. However, for those data elements to be
> useful, you will
> need to read them somewhere in the driver I think
Hello,
booting linux-next (not actual but older from 20.12 gives me following warning).
I'm booting gta04 device via devicetree with added sound node (copied
from beagleboard)
[1.962524] [ cut here ]
[1.967498] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:52
sysfs_warn
Any pointers? Still present in 3.13-rc7.
On Wed, Dec 4, 2013 at 1:22 PM, Roger Quadros wrote:
> +Kishon
>
> On 12/03/2013 11:33 PM, Belisko Marek wrote:
>> Hi,
>>
>> current 3.13-rcX break usb support on gta04 board (similar to
>> beagleboard) when booting via bo
c7 issue with unable to find phy
(phy was twl4030_usb). After that
issue is gone.
>
> Not sure what's causing those failures :-s
>
> -Kishon
>
>>
>> cheers,
>> -roger
>>
>> On 01/09/2014 02:31 AM, Belisko Marek wrote:
>>> Any pointers?
Hi Tony,
On Mon, Nov 11, 2013 at 5:49 PM, Tony Lindgren wrote:
> * Marek Belisko [131014 14:11]:
>> devconf1 reg access is localized only in mach-omap2 and we need to export
>> updating of devconf1 from omapdss venc driver (bypass and acbias bits).
>> Add simple api call which update only necess
Hi Tony,
On Mon, Nov 11, 2013 at 5:49 PM, Tony Lindgren wrote:
> * Marek Belisko [131014 14:11]:
>> devconf1 reg access is localized only in mach-omap2 and we need to export
>> updating of devconf1 from omapdss venc driver (bypass and acbias bits).
>> Add simple api call which update only necess
Hi Tomi,
On Fri, Oct 11, 2013 at 10:17 AM, Tomi Valkeinen wrote:
> On 11/10/13 10:42, Dr. H. Nikolaus Schaller wrote:
>
>> I am not sure if there is a SPI driver for a McBSP port [1]? And to make that
>> work (reliably) and tested it might need a lot of work for us. At least I
>> think
>> such a
Hi Tomi,
On Tue, Oct 29, 2013 at 12:07 PM, Tomi Valkeinen wrote:
> On 17/10/13 17:14, Marek Belisko wrote:
>> Signed-off-by: Marek Belisko
>> Signed-off-by: H. Nikolaus Schaller
>> ---
>>
>> changes from v1:
>> - reworked to be spi driver instead platform with custom spi bitbang
>> this confi
Hi,
On Tue, Dec 3, 2013 at 9:58 AM, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Tuesday 03 December 2013 02:03 PM, Marek Belisko wrote:
>> Without this change when booting omap3 device (gta04) with board file
>> leads to follwing errors:
>>
>> [1.203308] musb-hdrc musb-hdrc.0.auto: unable to f
On Tue, Dec 3, 2013 at 10:08 AM, Belisko Marek wrote:
> Hi,
>
> On Tue, Dec 3, 2013 at 9:58 AM, Kishon Vijay Abraham I wrote:
>> Hi,
>>
>> On Tuesday 03 December 2013 02:03 PM, Marek Belisko wrote:
>>> Without this change when booting omap3 device (gta04) w
Hi,
current 3.13-rcX break usb support on gta04 board (similar to
beagleboard) when booting via board file.
In console we can see messages:
[ 5227.287841] twl4030_usb twl4030_usb: Timeout setting T2 HSUSB PHY DPLL clock
[ 5232.936096] omap_musb_mailbox: musb core is not yet ready
[ 5233.958160]
Hi Tony,
On Tue, Dec 10, 2013 at 11:46 PM, Tony Lindgren wrote:
> * Belisko Marek [131210 14:13]:
>> On Tue, Nov 12, 2013 at 12:31 AM, Tony Lindgren wrote:
>> >
>> > It would be best to set it up as omap-ctrl.c driver under drivers
>> > somewhere with fe
On Mon, Dec 9, 2013 at 6:50 PM, Tony Lindgren wrote:
> * Belisko Marek [131208 23:36]:
>> Hi Tony,
>>
>> On Thu, Dec 5, 2013 at 7:43 PM, Tony Lindgren wrote:
>> > * Belisko Marek [131203 01:21]:
>> >> On Tue, Dec 3, 2013 at 10:08 AM, Belisko Marek
&
Hi Sebastian,
On Thu, Aug 14, 2014 at 11:03 PM, Sebastian Reichel wrote:
> Hi Marek,
>
> On Mon, Aug 11, 2014 at 09:52:52PM +0200, Belisko Marek wrote:
>> can you please take this series (I'll post update version with
>> removing debug code). Thanks.
>
> mh.
Ping? Benoit can you please merge this trivial update. Thanks.
On Sat, Dec 21, 2013 at 4:12 PM, Marek Belisko wrote:
> BMP085 EOC (End Of Conversion) irq line is connected to
> gpio113 on gta04. Set irq properties to have driver using irq
> instead polling for EOC.
>
> Signed-off-by: Marek Belisk
Hi Mark,
On Mon, Sep 22, 2014 at 1:03 PM, Mark Rutland wrote:
> Hi,
>
> On Wed, Mar 05, 2014 at 08:52:19PM +, Marek Belisko wrote:
>> Signed-off-by: Marek Belisko
>> ---
>> .../bindings/power_supply/twl4030_madc_battery.txt | 43
>> ++
>> 1 file changed, 43 insertions(+
Hi,
I've upgraded kernel on my PC to 3.15-rc5 and I got today freeze
(recovery possibly only by power off/on) when waking from suspend.
There is only warning in log but system was completely dead (no keys
reaction ).
May 14 15:53:15 nb kernel: [30404.485085] PM: Syncing filesystems ... done.
On Fri, Feb 14, 2014 at 2:31 PM, Mark Rutland wrote:
> On Fri, Feb 14, 2014 at 01:20:58PM +, Marek Belisko wrote:
>> Signed-off-by: Marek Belisko
>> ---
>> Documentation/devicetree/bindings/hwmon/twl4030-madc-hwmon.txt | 9
>> +
>> drivers/hwmon/twl4030-madc-hwmon.c
On Fri, Feb 14, 2014 at 2:43 PM, Mark Rutland wrote:
> On Fri, Feb 14, 2014 at 01:24:19PM +, Marek Belisko wrote:
>> Signed-off-by: Marek Belisko
>> ---
>> .../bindings/power_supply/twl4030_madc_battery.txt | 15 +++
>> drivers/power/twl4030_madc_battery.c | 109
>> ++
On Fri, Feb 14, 2014 at 2:48 PM, Lee Jones wrote:
>> Signed-off-by: Marek Belisko
>> ---
>> .../devicetree/bindings/mfd/twl4030-madc.txt | 18 +
>> drivers/mfd/twl4030-madc.c | 31
>> --
>
> Please separate these into different patches
Hi Sebastian,
On Fri, Feb 14, 2014 at 7:46 PM, Sebastian Reichel wrote:
> This converts twl4030-madc module to use the Industrial IO ADC
> framework and adds device tree support.
>
> Signed-off-by: Sebastian Reichel
> ---
> drivers/mfd/twl4030-madc.c | 121
> +++
Hi Sebastian,
On Fri, Feb 14, 2014 at 6:40 PM, Sebastian Reichel wrote:
> Hi Marek,
>
> I have prepared a patchset, which adds DT bindings for twl4030-madc
> using the standard IIO DT API. I have not yet send the patchset,
> since I have not yet found the time to test the patchset. I will
> send
Hi,
On Mon, Mar 24, 2014 at 1:01 PM, Evgeniy Polyakov wrote:
> Hi everyone
>
> 24.03.2014, 01:50, "David Fries" :
>> On Mon, Mar 17, 2014 at 10:38:13PM +0100, Belisko Marek wrote:
>>> booting latest 3.14-rc7 on gta04 board gives following warning:
>>
Hi Russel,
On Fri, Jul 4, 2014 at 1:01 AM, Russell King - ARM Linux
wrote:
> On Thu, Jul 03, 2014 at 10:49:23PM +0200, Marek Belisko wrote:
>> From: NeilBrown
>>
>> If a 'gpio_reset' is specified, then hold it low while
>> turning the power regulator on.
>> This is needed for some wi2wi wireless
Hi Michael,
On Mon, Jul 28, 2014 at 9:56 PM, Michael Trimarchi
wrote:
> Hi Marek
>
> Il 28/lug/2014 21:54 "Marek Belisko" ha scritto:
>
>
>>
>> Add model a5 which have additional jack detection.
>>
>> Signed-off-by: Marek Belisko
>> ---
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/ar
On Mon, Jul 28, 2014 at 10:04 PM, Michael Trimarchi
wrote:
> Hi
>
> Il 28/lug/2014 22:02 "Belisko Marek" ha scritto:
>
>
>>
>> Hi Michael,
>>
>> On Mon, Jul 28, 2014 at 9:56 PM, Michael Trimarchi
>> wrote:
>> > Hi
Sorry forgot to CC lkml. CCing now.
On Mon, Jun 30, 2014 at 9:49 PM, Marek Belisko wrote:
> From: NeilBrown
>
> A power_supply_changed should only be reported on significant changes
> such as transition between charging and not. Incremental changes
> such as charge increasing should not be repo
CCing lkml
On Mon, Jun 30, 2014 at 9:49 PM, Marek Belisko wrote:
> One an hdq buss, a missing device reads as 0xff, not -1.
> So do a translation to allow detecting of a missing bus.
>
> Signed-off-by: NeilBrown
> ---
> drivers/power/bq27x00_battery.c | 3 +++
> 1 file changed, 3 insertions(+)
PIng? Jonathan do you have any objections to this approach? Can you
please pick it? Thx.
On Tue, Feb 18, 2014 at 9:35 PM, Belisko Marek wrote:
> Hi Jonathan,
>
> On Tue, Feb 18, 2014 at 11:40 AM, Jonathan Cameron wrote:
>> On 14/02/14 14:25, Marek Belisko wrote:
>>>
Same on my side (some pending patches) but there was already
discussion: https://lkml.org/lkml/2014/5/16/504
On Mon, Jun 30, 2014 at 1:16 PM, Jenny Tc wrote:
> Hi all,
>
> I have few pending patches on power supply subsystem. So far I haven't seen
> any response from the power supply maintainers
On Tue, Jul 22, 2014 at 8:24 AM, Tony Lindgren wrote:
> * Marek Belisko [140721 14:08]:
>
> Can you please add the descriptions to all the patches?
OK thanks for review. I'll send v2.
> Other than that looks OK to me.
>
> Regards,
>
> Tony
BR,
marek
--
as simple and primitive as possible
On Tue, Jul 22, 2014 at 9:46 PM, Peter Meerwald wrote:
>
>> gta04 is using hmc5843l not hmc5843 so fix wrong compatible
>> entry.
>
> I guess you mean hmc5883l
Ah right. Thanks. I'll post update version.
>
>> Signed-off-by: Marek Belisko
>> ---
>> arch/arm/boot/dts/omap3-gta04.dts | 2 +-
>> 1 f
Hi,
any update on this issue? It's still present in 3.15 release.
Thanks.
On Tue, May 20, 2014 at 2:41 AM, Dave Airlie wrote:
>
>> Hi,
>
> cc'iong intel-gfx.
>
>>
>> I've upgraded kernel on my PC to 3.15-rc5 and I got today freeze
>> (recovery possibly only by power off/on) when waking from susp
Tomi,
any objections to this patch set? If not can you please take it? Thanks.
On Wed, Apr 23, 2014 at 10:15 PM, Marek Belisko wrote:
> This 3 patches adding display support for openmoko gta04 device.
> First patch add DT bindings for topolly td028 panel. Second add description
> for
> dss + pa
Hi Tomi,
On Wed, May 7, 2014 at 9:03 AM, Tomi Valkeinen wrote:
> On 23/04/14 23:15, Marek Belisko wrote:
>> This patch add support for lcd display on gta04 board. Display control
>> is connected on spi (used spi bitbang driver).
>>
>> Signed-off-by: Marek Belisko
>> ---
>> arch/arm/boot/dts/oma
On Fri, Jan 31, 2014 at 7:53 PM, Olof Johansson wrote:
> On Sat, Jan 25, 2014 at 1:38 PM, Marek Belisko wrote:
>> Signed-off-by: Marek Belisko
>> ---
>> Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/Documentation/devicetree/bin
Hi Tony,
On Thu, Dec 5, 2013 at 7:43 PM, Tony Lindgren wrote:
> * Belisko Marek [131203 01:21]:
>> On Tue, Dec 3, 2013 at 10:08 AM, Belisko Marek
>> wrote:
>> > Hi,
>> >
>> > On Tue, Dec 3, 2013 at 9:58 AM, Kishon Vijay Abraham I
>> > wrote
Hi Tony,
On Tue, Nov 12, 2013 at 12:31 AM, Tony Lindgren wrote:
> * Belisko Marek [13 14:01]:
>> Hi Tony,
>>
>> On Mon, Nov 11, 2013 at 5:49 PM, Tony Lindgren wrote:
>> > * Marek Belisko [131014 14:11]:
>> >> devconf1 reg access is localize
Hi Mark,
On Fri, Nov 15, 2013 at 4:30 PM, Mark Rutland wrote:
> On Thu, Nov 14, 2013 at 09:46:48PM +, Marek Belisko wrote:
>> Signed-off-by: Marek Belisko
>> ---
>> Documentation/devicetree/bindings/misc/bmp085.txt | 8
>> drivers/misc/bmp085.c | 53
>> +++
On Sat, Feb 8, 2014 at 7:22 AM, Bill Fink wrote:
> On Fri, 7 Feb 2014, Marek Belisko wrote:
>
>> Signed-off-by: NeilBrown
>> Signed-off-by: Marek Belisko
>> ---
>> Based on Neil's patch and extend for documentation and bindings include.
>>
>> .../bindings/net/rfkill/rfkill-relugator.txt
Hi,
I'm trying to boot gta04 board with DT with latest 3.13-rc4 kernel.
Most of the parts seems to work except of mmc. I can see for mmc0 only
messages (vmmc1 and vsim regulators seems to be fine):
[1.969573] VMMC1: 1850 <--> 3150 mV at 3000 mV
[2.016784] VSIM: 1800 <--> 3000 mV at 1800 m
OK seems I found solution:
http://marc.info/?l=linux-omap&m=138756097116464&w=2
@Tony: Is this going to 3.13?
On Sun, Dec 22, 2013 at 12:26 AM, Belisko Marek wrote:
> Hi,
>
> I'm trying to boot gta04 board with DT with latest 3.13-rc4 kernel.
> Most of the parts seems
On Fri, Dec 27, 2013 at 7:16 PM, Tony Lindgren wrote:
> * Belisko Marek [131221 15:58]:
>> OK seems I found solution:
>> http://marc.info/?l=linux-omap&m=138756097116464&w=2
>
> Good to hear :)
>
>> @Tony: Is this going to 3.13?
>
> Sorry too intr
Hi Sebastian,
can you please take this series (I'll post update version with
removing debug code). Thanks.
On Thu, Mar 6, 2014 at 10:10 PM, Belisko Marek wrote:
> Hi Sebastian,
>
> On Thu, Mar 6, 2014 at 12:25 AM, Sebastian Reichel wrote:
>> Hi Marek,
>>
>> I
Hi Pali,
On Thu, Jul 23, 2015 at 10:15 PM, Pali Rohár wrote:
> On Thursday 23 July 2015 19:03:08 Andrew F. Davis wrote:
>> >> -#ifdef CONFIG_BATTERY_BQ27X00_I2C
>> >> -MODULE_ALIAS("i2c:bq27000-battery");
>> >> +#ifdef CONFIG_BATTERY_BQ27XXX_I2C
>> >> +MODULE_ALIAS("i2c:bq27xxx-battery");
>> >>
>
On Thu, Jul 23, 2015 at 11:15 PM, Pali Rohár wrote:
> On Thursday 23 July 2015 22:56:26 Belisko Marek wrote:
>> Hi Pali,
>>
>> On Thu, Jul 23, 2015 at 10:15 PM, Pali Rohár
>> wrote:
>> > On Thursday 23 July 2015 19:03:08 Andrew F. Davis wrote:
>>
Hi Dmitry,
On Thu, Jul 23, 2015 at 10:53 PM, Dmitry Torokhov
wrote:
> On Thu, Jul 23, 2015 at 10:38:34PM +0200, Marek Belisko wrote:
>> Fix following:
>> [8.862274] ERROR: Bad of_node_put() on /ocp/i2c@4807/twl@48/audio
>> [8.869293] CPU: 0 PID: 1003 Comm: modprobe Not tainted 4.2.0-r
Hi Jacob,
On Thu, Nov 19, 2015 at 2:40 PM, Jacob Siverskog
wrote:
> This is according to figure 12 ("I2C Programming Procedure") in
> "Si5351A/B/C Data Sheet"
> (https://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351-B.pdf).
>
> Without the PLL soft reset, we were unable to get three out
Hi,
randomly hit this issue from 4.4-rc1:
[ 35.926605] INFO: rcu_sched detected stalls on CPUs/tasks:
[ 35.932373] (detected by 0, t=2602 jiffies, g=519, c=518, q=38)
[ 35.938659] All QSes seen, last rcu_sched kthread activity 2602
(-26407--29009), jiffies_till_next_fqs=1, root ->qsmask 0x
Hi Tomi,
On Wed, Nov 12, 2014 at 2:57 PM, Tomi Valkeinen wrote:
> Hi,
>
>
> On 03/11/14 23:59, Marek Belisko wrote:
>> opa362 is amplifier for videoand can be connected to the tvout pads
>> of the OMAP3. It has one gpio control for enable/disable of the output
>> (high impedance).
>>
>> Signed-of
Hi Tony,
On Tue, Nov 11, 2014 at 12:36 AM, Tony Lindgren wrote:
> * Marek Belisko [141103 14:01]:
>> gta04 board need for tvout enabled 2 bits in devconf1 register (tvbypass and
>> acbias).
>> Add single pinmux entry and enable it.
>>
>> Signed-off-by: Marek Belisko
>> ---
>> arch/arm/boot/dt
Hi Anjana,
please update subject to something like staging: ft1000:
Marek
On Sat, Nov 29, 2014 at 2:34 PM, Anjana Sasindran
wrote:
> This patch fix the checkpatch.pl warning
>
> WARNING: Missing a blank line after declaration
>
> Signed-off-by: Anjana Sasindran
> ---
> drivers/staging/f
Please use shorter summary phrase (which appear an subject) + split
commit message to more line (not one long line).
marek
On Sat, Nov 29, 2014 at 3:49 AM, Geoff Darst wrote:
> Replace two instances of __attribute ((__packed__) with __packed macro to
> address the warning found by the checkpatc
1 - 100 of 122 matches
Mail list logo
