ably already solved it?
> Any other suggestions for approaching the problem? Any preferred
> solution?
I think we have the same problem. Can you provide more detail on the hardware
implementation of your wake irq controller? I presume you have some set of
registers, an irq maybe, and some other stuff? And how does it fit into the
overall architecture from a hardware perspective?
Regards,
Andy Gross
On Wed, Jul 20, 2016 at 06:16:06AM -0700, Sören Brinkmann wrote:
> Hi Marc,
>
> On Wed, 2016-07-20 at 09:17:16 +0100, Marc Zyngier wrote:
> > On 20/07/16 00:34, Sören Brinkmann wrote:
> > > Hi Andy,
> > >
> > > On Tue, 2016-07-19 at 17:47:13 -0500, And
On Tue, Jun 21, 2016 at 06:39:53PM +0100, Srinivas Kandagatla wrote:
> This patch adds support to sdc2 sdhci controller, which is used on some
> of the boards.
>
> Signed-off-by: Srinivas Kandagatla
> ---
> Hi Andy,
>
> Am resending just this one patch, as It does not make sense
> to resend ent
On Fri, Jun 17, 2016 at 04:14:12PM +0100, Srinivas Kandagatla wrote:
> This patch adds pinctrl required for sdhci for external sd card
> controller.
>
> Signed-off-by: Srinivas Kandagatla
> ---
I presume this is the right patch 15? As it matches the subject in your cover
letter?
Andy
low compile testing without SMD support after patch 2
>
> include/linux/soc/qcom/wcnss_ctrl.h | 13 +
> 1 file changed, 13 insertions(+)
>
This is fine.
Acked-by: Andy Gross
On Thu, Sep 08, 2016 at 09:21:59PM -0700, Bjorn Andersson wrote:
> On Thu 08 Sep 10:35 PDT 2016, Kalle Valo wrote:
>
> > Bjorn Andersson writes:
> >
> > > On Thu, Sep 8, 2016 at 5:16 AM, Kalle Valo wrote:
> > >> Bjorn Andersson writes:
> > >>
> > >>> The wcn36xx wifi driver follows the life cy
issue by executing qup_i2c_pm_suspend_runtime
> conditionally in qup_i2c_suspend.
>
> Cc: Andy Gross
> Cc: David Brown
> Cc: Wolfram Sang
> Signed-off-by: Sudeep Holla
Reviewed-by: Andy Gross
On Thu, Sep 01, 2016 at 05:58:17PM +0300, Stanimir Varbanov wrote:
> Hi,
>
> Cc: Marek
>
> On 08/30/2016 08:17 PM, Bjorn Andersson wrote:
> > On Mon 29 Aug 04:48 PDT 2016, Stanimir Varbanov wrote:
> >
> > [..]
> >>> Trying to wrap my head around how the iommu part works here. The
> >>> downstrea
On Thu, Aug 04, 2016 at 05:57:48PM -0700, Stephen Boyd wrote:
> On 07/11, Andy Gross wrote:
> > On Mon, Jul 11, 2016 at 02:50:08PM -0700, Stephen Boyd wrote:
> > > The voltage ranges listed here are wrong. The pma8084 pldo
> > > supports three different over
On Thu, Aug 04, 2016 at 05:58:26PM -0700, Stephen Boyd wrote:
> On 07/11, Andy Gross wrote:
> > On Mon, Jul 11, 2016 at 02:50:07PM -0700, Stephen Boyd wrote:
> >
> > > static const struct regulator_desc pm8941_pldo = {
> > > .linear_ranges
On Fri, Jul 01, 2016 at 10:11:00AM -0500, Timur Tabi wrote:
> Christopher Covington wrote:
> >Due to distribution differences [1][2], I see =y built-in as the default
> >on mobile platforms and =m modular as the default on server platforms.
>
> I don't think we should mix "server" defconfing entri
. Wysocki"
> Signed-off-by: Sudeep Holla
I tested this patch on the Qualcomm 410c platform. It worked like a
charm. Thanks for working on this!
Tested-by: Andy Gross
On 24 August 2016 at 07:18, Nayak, Rajendra wrote:
>
> On 8/24/2016 3:52 PM, Paolo Pisati wrote:
>>
>> On Wed, Aug 17, 2016 at 02:33:40PM -0500, Andy Gross wrote:
>>>
>>> On Wed, Aug 17, 2016 at 10:48:43AM +0530, Rajendra Nayak wrote:
>>>>
>>&
On 17 June 2016 at 05:16, Pramod Gurav wrote:
> @@ -1635,6 +1732,7 @@ static int msm_serial_remove(struct platform_device
> *pdev)
> struct uart_port *port = platform_get_drvdata(pdev);
>
> uart_remove_one_port(&msm_uart_driver, port);
> + pm_runtime_disable(&pdev->dev);
On 24 August 2016 at 22:13, Bjorn Andersson wrote:
> On Wed 24 Aug 03:22 PDT 2016, Paolo Pisati wrote:
>
>> On Wed, Aug 17, 2016 at 02:33:40PM -0500, Andy Gross wrote:
>> > On Wed, Aug 17, 2016 at 10:48:43AM +0530, Rajendra Nayak wrote:
>> > > Hey Andy,
>>
s/clk/clk.c:476
> clk_core_unprepare+0x80/0x90
> Modules linked in:
>
Thanks for fixing this. I had noticed this yesterday when I was testing your
freeze patch but hadn't had time to dig in.
Tested-by: Andy Gross
se address of
> the reserved memory region.
>
> This patch adds an accessor for such drivers to acquire a handle to
> their associated reserved-memory for this purpose.
>
> Signed-off-by: Bjorn Andersson
Reviewed-by: Andy Gross
: Bjorn Andersson
Acked-by: Andy Gross
f-by: Alex Elder
> Acked-by: Bjorn Andersson
Acked-by: Andy Gross
lex Elder
> Acked-by: Bjorn Andersson
Acked-by: Andy Gross
On Tue, Oct 24, 2017 at 05:20:20PM -0700, Stephen Boyd wrote:
> On 10/20, Alex Elder wrote:
> > This series deletes three config options related to USB on Qualcomm
> > SoCs from the arm64 "defconfig", along with the code that they
> > enable. The code is no longer needed by any Qualcomm hardware.
nterface for making secure monitor call for
> memory ownership switching request.
>
> Signed-off-by: Avaneesh Kumar Dwivedi
Looks fine to me.
Acked-by: Andy Gross
This patch creates a platform driver for the SCM so that we can adequately
manage resources. This removes clients having to carry the necessary
clocks to use the SCM resources.
Signed-off-by: Andy Gross
---
.../devicetree/bindings/firmware/qcom,scm.txt | 25
drivers/firmware
On Mon, Oct 12, 2015 at 10:19:12AM +1100, Stephen Rothwell wrote:
> Hi Andy,
>
> Today's linux-next merge of the qcom tree got a conflict in:
>
> arch/arm/configs/multi_v7_defconfig
>
> between commits:
>
> b605aded4491 ("ARM: multi_v7_defconfig: Add missing QCOM APQ8064 configs")
> cc688
On Fri, Oct 09, 2015 at 09:35:37PM -0700, Bjorn Andersson wrote:
> Update the SMEM items for the second set of SMD channels, as these where
> incorrect.
>
> Signed-off-by: Bjorn Andersson
Nice. Good catch. I verified by counting through the #defines in the
codeaurora code.
Revie
On Mon, Oct 12, 2015 at 05:49:52PM -0700, Bjorn Andersson wrote:
> The set_load() op deals with uA while the SMD packets used mA, so
> convert as we're building the packet.
>
> Signed-off-by: Bjorn Andersson
> ---
Looks fine to me. Thanks for the fix.
--
Qualcomm Innovation Center, Inc.
The Q
On Tue, Oct 13, 2015 at 01:57:43PM -0700, Bjorn Andersson wrote:
> The BIT() was incorrectly inherited from family A and should not be used
> on family B where the state is denoted by an enum.
>
> Reported-by: Georgi Djakov
> Signed-off-by: Bjorn Andersson
> ---
> drivers/soc/qcom/smd-rpm.c | 2
This patch moves the qcom,smd-rpm.txt to the correct location and splits
out the smd and rpm documentation. In addition, a smd-rpm-regulator
document is added.
Signed-off-by: Andy Gross
---
.../devicetree/bindings/soc/qcom,smd-rpm.txt | 117
.../bindings/soc/qcom
This patch adds support and documentation for the PM8916 regulators
found on MSM8916 platforms.
Signed-off-by: Andy Gross
---
.../bindings/soc/qcom/qcom,smd-rpm-regulator.txt | 18 ++
drivers/regulator/qcom_smd-regulator.c | 64
2 files changed, 82
This patch adds support and documentation for the PMA8084 regulators
found on APQ8084 platforms.
Signed-off-by: Andy Gross
---
.../bindings/soc/qcom/qcom,smd-rpm-regulator.txt | 35
drivers/regulator/qcom_smd-regulator.c | 95
2 files changed, 130
This patch adds all the nodes required to support the PM8841 and PM8941
PMIC regulators present on MSM8974 platforms.
Signed-off-by: Andy Gross
---
arch/arm/boot/dts/qcom-msm8974.dtsi | 75 +++
1 file changed, 75 insertions(+)
diff --git a/arch/arm/boot/dts
This patch adds support for the PMA8084 regulators found on APQ8084
platforms.
Signed-off-by: Andy Gross
---
arch/arm/boot/dts/qcom-apq8084.dtsi | 52 +++
1 file changed, 52 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi
b/arch/arm/boot/dts
This patch adds support for RPM and SMD nodes that are present on APQ8084
platforms.
Signed-off-by: Andy Gross
---
arch/arm/boot/dts/qcom-apq8084.dtsi | 20
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi
b/arch/arm/boot/dts/qcom
This patch adds support and documentation for the PM8916 regulators
found on MSM8916 platforms.
Signed-off-by: Andy Gross
---
.../bindings/soc/qcom/qcom,smd-rpm-regulator.txt | 18 ++
drivers/regulator/qcom_smd-regulator.c | 64
2 files changed, 82
This patch adds all the required nodes to support SMEM on APQ8084
Signed-off-by: Andy Gross
---
arch/arm/boot/dts/qcom-apq8084.dtsi | 31 +++
1 file changed, 31 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi
b/arch/arm/boot/dts/qcom-apq8084.dtsi
Add support for the SMD and RPM devices found on MSM8916 platforms.
Signed-off-by: Andy Gross
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 20
1 file changed, 20 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi
b/arch/arm64/boot/dts/qcom/msm8916.dtsi
This patch adds the nodes necessary to support the SMEM driver on MSM8916
platforms.
Signed-off-by: Andy Gross
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 36 +
1 file changed, 36 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi
b/arch/arm64
for the regulators and their
dependencies for all of the platforms which support SMD-RPM regulators.
Andy Gross (11):
soc: qcom: documentation: Update SMD/RPM Docs
soc: qcom: smd-rpm: Add existing platform support
arm64: dts: qcom: Add MSM8916 SMEM nodes
arm64: dts: qcom: Add RPM/SMD support
This patch adds the PM8916 regulator nodes found on MSM8916 platforms.
Signed-off-by: Andy Gross
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 28
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi
b/arch/arm64/boot/dts/qcom
This patch adds support for all current Qualcomm platforms which utilize
RPM over SMD. This includes both MSM8916 and APQ8084.
Signed-off-by: Andy Gross
---
.../devicetree/bindings/soc/qcom/qcom,smd-rpm.txt |2 ++
drivers/soc/qcom/smd-rpm.c |2 ++
2 files
This patch enables all of the options required to support SMD RPM based
regulators.
Signed-off-by: Andy Gross
---
arch/arm/configs/qcom_defconfig |8 +---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
This patch enables all of the options necessary to support the Qualcomm SMD
RPM regulator driver.
Signed-off-by: Andy Gross
---
arch/arm/configs/multi_v7_defconfig |5 +
1 file changed, 5 insertions(+)
diff --git a/arch/arm/configs/multi_v7_defconfig
b/arch/arm/configs
On Tue, Sep 08, 2015 at 04:35:31PM -0500, Andy Gross wrote:
> This patch adds all the nodes required to support the PM8841 and PM8941
> PMIC regulators present on MSM8974 platforms.
>
> Signed-off-by: Andy Gross
> ---
This patch dupes work done by Bjorn. So I'll take his in
Disregard this one. Dupe with different subject line of the other patch 6
--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-ke
serial and
> then runs a getty on ttyMSM0. This patch should supersede Paul's earlier
> patch that removes the module code from this driver.
>
> drivers/tty/serial/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Reviewed-by: Andy Gross
--
Qualcomm Innovation
river anymore, but comes from the board layout, so
> that is why it should be in DT anyway.
>
> Signed-off-by: Georgi Djakov
> ---
Looks good to me.
Reviewed-by: Andy Gross
--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora For
On Thu, Sep 03, 2015 at 02:33:22PM -0700, Stephen Boyd wrote:
> On 07/20, Andy Gross wrote:
> > This patch creates a platform driver for the SCM so that we can adequately
> > manage resources. This removes clients having to carry the necessary
> > clocks to use the SCM resou
On Wed, Sep 02, 2015 at 03:46:43PM -0700, Stephen Boyd wrote:
> This supersedes the 3 "series" of patches to move smem to big endian,
> smd to big endian, and make qcom_smem_get() return a pointer.
>
> I've moved the qcom_smem_get() returning a pointer part to the beginning
> of the series so it c
On Fri, Oct 23, 2015 at 01:01:51PM -0700, Stephen Boyd wrote:
> Now that we have a generic library function for this, replace the
> open-coded instance.
>
> Cc: Bjorn Andersson
> Signed-off-by: Stephen Boyd
> ---
Acked-by: Andy Gross
--
Qualcomm Innovation Center,
er Baker
> Signed-off-by: Srinivas Kandagatla
> ---
> arch/arm/configs/multi_v7_defconfig | 8
> 1 file changed, 8 insertions(+)
Works like a charm.
Tested-by: Andy Gross
--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Au
+ olof
On Tue, Jul 24, 2018 at 05:59:42PM +0100, Mark Brown wrote:
> On Tue, Jul 24, 2018 at 08:43:46AM -0700, Doug Anderson wrote:
> > On Tue, Jul 24, 2018 at 8:25 AM, Mark Brown wrote:
>
> > > There was also some other thing called command DB as well which was a
> > > separate series. Ideally
On Thu, Jul 19, 2018 at 12:53:04PM +0200, Nicolas Dechesne wrote:
> hi Niklas,
>
> On Wed, Jul 18, 2018 at 4:53 PM Niklas Cassel
> wrote:
> >
> > Drop legacy suffix for clocks used by MSM DRM driver.
>
> I had the same patch locally, which I forgot to send.. so thanks for
> sending it ;)
>
> y
On Wed, Jul 18, 2018 at 03:52:26PM +0530, Amit Kucheria wrote:
> On Fri, May 25, 2018 at 4:02 PM, Viresh Kumar wrote:
> > The OPP properties, like "operating-points", should either be present
> > for all the CPUs of a cluster or none. If these are present only for a
> > subset of CPUs of a cluster
On 19 January 2018 at 09:37, Sudeep Holla wrote:
> Hi Andy,
>
> On 18/01/18 10:43, Sudeep Holla wrote:
>> We need to call of_node_put() for device nodes obtained with
>> of_find_node_by_path().
>>
>> Fixes: 3aa0582fdb82 ("of: platform: populate /firmware/ node from
>> of_platform_default_populate
gt;
> Return the adjusted physical base address to the caller.
>
> Signed-off-by: Bjorn Andersson
This looks fine.
Acked-by: Andy Gross
On Tue, Jan 16, 2018 at 08:45:49AM -0800, Bjorn Andersson wrote:
> On Fri 15 Dec 05:40 PST 2017, Loys Ollivier wrote:
>
> > When using other platform architectures, in the init of the qcom_scm
> > driver, of_node_put is called on /firmware if no qcom dt is found.
> > This results in a kernel error
n
> ---
> drivers/remoteproc/Kconfig | 1 +
> drivers/soc/qcom/Kconfig | 2 +-
> samples/Kconfig| 1 +
> 3 files changed, 3 insertions(+), 1 deletion(-)
Acked-by: Andy Gross
On Tue, Sep 25, 2018 at 06:46:51AM -0400, Brian Masney wrote:
> The following commits used IRQ_TYPE_NONE since that matched what was
> already in the file and I do not have access to the datasheets for
> these devices. After these patches were submitted, commit dcf145011400
> ("ARM: dts: qcom-msm89
On Wed, Nov 28, 2018 at 04:53:35AM -0500, Brian Masney wrote:
> This patch correctly sets the gpios property for the ak8963
> magnetometer's DRDY pin so that interrupts work properly.
>
> Signed-off-by: Brian Masney
> ---
Queued. Thanks for the patch.
Andy
On Thu, Nov 29, 2018 at 08:38:26AM -0800, Stephen Boyd wrote:
> We need to check the call to cmd_db_read_aux_data() for the error case,
> so that we don't continue and use potentially uninitialized values for
> 'pri_count' and 'sec_count'. Otherwise, we get the following compiler
> warnings:
>
>
On Thu, Nov 29, 2018 at 04:36:00PM -0600, Andy Gross wrote:
> On Thu, Nov 29, 2018 at 08:38:26AM -0800, Stephen Boyd wrote:
> > We need to check the call to cmd_db_read_aux_data() for the error case,
> > so that we don't continue and use potentially uninitialized values for
This patch removes the linux-soc mailing list from the Qualcomm SoC
entry. We use the linux-msm and there is no need to have the second
one and this clears the list for use by others.
Signed-off-by: Andy Gross
---
MAINTAINERS | 1 -
1 file changed, 1 deletion(-)
diff --git a/MAINTAINERS b
On Fri, Nov 30, 2018 at 01:12:01PM +1100, Stephen Rothwell wrote:
> Hi Andy,
>
> On Thu, 29 Nov 2018 16:42:34 -0600 Andy Gross wrote:
> >
> > On Thu, Nov 29, 2018 at 04:36:00PM -0600, Andy Gross wrote:
> > > On Thu, Nov 29, 2018 at 08:38:26AM -0800, Stephen Boyd wro
On Thu, Nov 15, 2018 at 10:18:11AM -0700, Jeffrey Hugo wrote:
> The externally accessible SD card slot on the MTP is driven by SDCC2.
> Wire it up for use.
>
> Signed-off-by: Jeffrey Hugo
> ---
> arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 13 +
> arch/arm64/boot/dts/qcom/msm8998.dts
On Thu, Nov 15, 2018 at 09:15:18AM +0530, Vinod Koul wrote:
> On 01-10-18, 11:51, Vinod Koul wrote:
> > This adds prng-ee nodes for msm8996 and sdm845
>
> Ping Andy, would appreciate if you can pick these up.
Done. I did have to massage the location in dts for both of these patches to
keep the a
On Wed, Oct 03, 2018 at 05:53:50PM +0530, Alok Chauhan wrote:
> when the kernel inits a SE, its quite possible we have pending interrupts
> from bootloaders which did not handle/clear them. So do this in kernel at
> the SE init, to avoid some of it causing bad behavior, while at it also
> club all
On Mon, Oct 01, 2018 at 11:55:54AM +0200, Niklas Cassel wrote:
> The help text is visible in menuconfig, however QCOM_QMI_HELPERS is a
> hidden kconfig, so it is not selectable in menuconfig.
>
> Remove the help text so that it is more clear that this is intentionally
> a hidden kconfig.
>
> Sign
On Mon, Nov 12, 2018 at 02:11:24PM -0800, Matthias Kaehlcke wrote:
> This series adds a channel for the die temperature to the QCOM SPMI
> PMIC5 ADC. It also fixes an example in the DT documentation.
>
> Matthias Kaehlcke (2):
> dt-bindings: iio: vadc: Add unit address to ADC channel node in
>
On Mon, Dec 03, 2018 at 03:32:11PM -0600, Rob Herring wrote:
> Convert QCom SoC bindings to DT schema format using json-schema.
>
> Cc: Andy Gross
> Cc: David Brown
> Cc: Mark Rutland
> Cc: devicet...@vger.kernel.org
> Signed-off-by: Rob Herring
Acked-by: Andy Gross
On Tue, Dec 04, 2018 at 12:37:18PM -0800, Matthias Kaehlcke wrote:
> Hi Andy,
>
> can this be landed or are any more changes needed?
>
> Thanks
I'll see about adding it to the second pull request.
Thank,
Andy
On Wed, Dec 05, 2018 at 09:37:21AM -0800, Bjorn Andersson wrote:
> + linux-arm-msm
>
> On Wed 21 Nov 18:32 PST 2018, Jonathan Marek wrote:
>
> > This fixes the case when CONFIG_QCOM_SCM is not enabled, and linux/errno.h
> > has not been included previously.
> >
> > Signed-off-by: Jonathan Marek
driver on MSM8996
* Fix issue with xo clk name on MSM8998
* Add cooling maps on MSM8916
* Add UART nodes on SDM845
* Add camera subsystem support on MSM8996 and MSM8916
Andy Gross (1):
arm64: dts: qcom: msm8998: Fixup clock to
The following changes since commit b601f73130a375c912d9f2ec93c5f3cea5d6a3da:
drm: msm: Check cmd_db_read_aux_data() for failure (2018-11-29 17:41:53 -0600)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux.git
tags/qcom-drivers-for-4.21-2
fo
nding clocks protected for the MTP, in order to allow it to boot.
>
> Cc: Stephen Boyd
> Signed-off-by: Bjorn Andersson
This looks fine to me.
Acked-by: Andy Gross
18 at 11:37:40PM -0500, Andy Gross wrote:
> The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
>
> Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/agross/linu
used
> by self-authenticating remoteproc as well.
>
> Signed-off-by: Sricharan R
> Signed-off-by: Bjorn Andersson
looks fine to me
Acked-by: Andy Gross
On Tue, Jun 12, 2018 at 03:48:06PM +0100, Srinivas Kandagatla wrote:
> Access to UART0 is disabled by bootloaders. By leaving it enabled by
> default would reboot the board.
> Disable this for now, this would alteast give a board which boots.
>
> Signed-off-by: Srinivas Kandagatla
Thanks for thi
On Mon, Dec 10, 2018 at 02:20:47PM +0200, Stanimir Varbanov wrote:
> Hi Andy,
>
> On 12/8/18 7:13 AM, Andy Gross wrote:
> > The following changes since commit b601f73130a375c912d9f2ec93c5f3cea5d6a3da:
> >
> > drm: msm: Check cmd_db_read_aux_data() for failure (201
On Mon, Dec 10, 2018 at 11:36:48PM +0200, Stanimir Varbanov wrote:
>
>
> On 10.12.18 г. 21:05 ч., Andy Gross wrote:
> >On Mon, Dec 10, 2018 at 02:20:47PM +0200, Stanimir Varbanov wrote:
> >>Hi Andy,
> >>
> >>On 12/8/18 7:13 AM, Andy Gross wrot
On Mon, 7 Jan 2019 at 14:26, Jack Pham wrote:
>
> Hi Jorge,
>
> Sorry for the late reply as I was out during the holiday break.
>
> On Fri, Dec 28, 2018 at 01:38:59PM +0100, Jorge Ramirez wrote:
> > On 12/20/18 18:37, Jack Pham wrote:
> > >Hi Rob, Jorge,
> > >
> > >On Thu, Dec 20, 2018 at 11:05:31
On Fri, Dec 21, 2018 at 11:13:18AM +0100, Marc Gonzalez wrote:
> The private copy of readl_poll_timeout is no longer needed.
> Use the implementation in iopoll.h instead.
>
> Signed-off-by: Marc Gonzalez
Reviewed-by: Andy Gross
On Tue, Oct 02, 2018 at 11:36:11AM +0200, Arnd Bergmann wrote:
> On Sun, Sep 30, 2018 at 8:38 PM Andy Gross wrote:
> >
> > The following changes since commit 5b394b2ddf0347bef56e50c69a58773c94343ff3:
> >
> > Linux 4.19-rc1 (2018-08-26 14:11:59 -0700)
> >
> &
On Tue, Oct 02, 2018 at 11:30:29AM +0200, Arnd Bergmann wrote:
> On Sun, Sep 30, 2018 at 8:38 PM Andy Gross wrote:
> >
> > The following changes since commit 5b394b2ddf0347bef56e50c69a58773c94343ff3:
> >
> > Linux 4.19-rc1 (2018-08-26 14:11:59 -0700)
> >
> &
On Thu, Oct 25, 2018 at 10:55:32AM +0530, Amit Kucheria wrote:
> Andy,
>
> While you acked the tsens thermal DT patches[1] so they could go
> through the thermal tree[2] to avoid a dependency, Eduardo would
> prefer the DT changes for tsens to go through the arch tree.
>
> To avoid a scenario
On Tue, Sep 18, 2018 at 01:06:48PM +0800, zhong jiang wrote:
> Fix the following compile warning:
>
> drivers/soc/qcom/cmd-db.c:194:38: warning: ent.addr may be used
> uninitialized in this function [-Wmaybe-uninitialized]
> return ret < 0 ? 0 : le32_to_cpu(ent.addr);
>
> drivers/soc/qcom/cm
On Fri, Dec 05, 2014 at 12:53:33PM -0800, Stephen Boyd wrote:
> The interrupt is 16, not 32 (which it would be if we include PPIs
> in the count of interrupts).
>
> Cc: Andy Gross
> Signed-off-by: Stephen Boyd
This fixed my issue!
Reviewed-by: Andy Gross
Tested-by: Andy Gross
On Thu, Jan 22, 2015 at 10:59:14AM -0800, Jack Pham wrote:
> Hi Andy,
>
> On Fri, Sep 12, 2014 at 02:28:08PM -0500, Andy Gross wrote:
> > This patch adds a new driver for the Qualcomm USB 3.0 PHY that exists on
> > some
> > Qualcomm platforms. This driver uses the gen
On Wed, Jan 21, 2015 at 08:46:45PM -0800, Joe Perches wrote:
> > +L: linux-...@vger.kernel.org
> > S: Maintained
> > F: arch/arm/mach-qcom/
> > +F: drivers/soc/qcom
>
> Please add a terminating /
>
> F:drivers/soc/qcom/
Noted, will fix.
--
Qualcomm Innovation Center, Inc.
The Qualcomm In
On Thu, Jan 22, 2015 at 12:34:26PM +0530, Archit Taneja wrote:
> Add register offset table entry for the newer (v1.7.0) version of the BAM IP
> found on MSM8916. Update the DT bindings documentation.
>
> Signed-off-by: Archit Taneja
> ---
Looks good.
Reviewed-by: Andy Gross
On Wed, Oct 15, 2014 at 10:18:30AM +0200, Kumar Gala wrote:
>
> On Oct 1, 2014, at 4:41 PM, Arnd Bergmann wrote:
>
> > On Monday 22 September 2014, Kumar Gala wrote:
> >> The following changes since commit
> >> 7d1311b93e58ed55f3a31cc8f94c4b8fe988a2b9:
> >>
> >> Linux 3.17-rc1 (2014-08-16 10:
Signed-off-by: Andy Gross
---
drivers/dma/Kconfig| 10 +
drivers/dma/Makefile |1 +
drivers/dma/qcom_adm.c | 899
3 files changed, 910 insertions(+)
create mode 100644 drivers/dma/qcom_adm.c
diff --git a/drivers/dma/Kconfig b
via other means.
Signed-off-by: Andy Gross
---
Documentation/devicetree/bindings/dma/qcom_adm.txt | 14 +-
1 file changed, 5 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/dma/qcom_adm.txt
b/Documentation/devicetree/bindings/dma/qcom_adm.txt
index
sub burst length transactions.
Selection of single or box descriptors depends on the sg length and burst
size.
- Removed use of crci in the dmas property. CRCI is now designated via the
slave_config structure and will be stored in slave_id.
Andy Gross (2):
dmaengine: Add ADM driveri
On Wed, Jan 07, 2015 at 09:26:11PM -0600, Andy Gross wrote:
I somehow managed to lose my commit message. I'll fix that in the next set.
The rest of the patch is fine.
> Signed-off-by: Andy Gross
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel"
On Thu, Jan 08, 2015 at 11:26:30AM -0500, Christopher Covington wrote:
> > +DMA clients must use the format descripted in the dma.txt file, using a two
> > cell specifier for each channel.
> >
> > Each dmas request consists of 3 cells:
>
> Now 2 cells?
Good catch. I'll fix in next rev. T
Add device tree binding support for the QCOM TCSR driver.
Signed-off-by: Andy Gross
---
.../devicetree/bindings/soc/qcom/qcom,tcsr.txt | 33 +++
include/dt-bindings/soc/qcom,tcsr.h| 34
2 files changed, 67 insertions(+)
create mode
configuration settings for the USB
PHY selection and ADM DMA CRCI muxing.
Andy Gross (2):
soc: qcom: Add TCSR driver
soc: qcom: Add device tree binding for TCSR
.../devicetree/bindings/soc/qcom/qcom,tcsr.txt | 33
drivers/soc/qcom/Kconfig |7
controller.
Signed-off-by: Andy Gross
---
drivers/soc/qcom/Kconfig |7
drivers/soc/qcom/Makefile|1 +
drivers/soc/qcom/qcom_tcsr.c | 83 ++
include/soc/qcom/qcom_tcsr.h | 21 +++
4 files changed, 112 insertions(+)
create mode
On Fri, Jan 09, 2015 at 10:08:20AM +0530, Archit Taneja wrote:
> Hi,
>
> On 01/08/2015 08:56 AM, Andy Gross wrote:
> >Signed-off-by: Andy Gross
>
>
> >+static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan
> >*chan,
> >+struc
On Thu, Jan 08, 2015 at 03:39:44PM -0800, Stephen Boyd wrote:
> On 01/08/2015 02:52 PM, Andy Gross wrote:
> > +
> > +static struct platform_driver qcom_tcsr_driver = {
> > + .driver = {
> > + .name = "tcsr",
> > + .owner
1 - 100 of 764 matches
Mail list logo
