From: Chen-Yu Tsai
[ Upstream commit 55b271af765b0e03d1ff29502f81644b1a3c87fd ]
The device tree currently only assigns the a supply for the first CPU
core, when in reality the regulator supply is shared by all four cores.
This might cause an issue if the implementation does not realize the
shari
From: Erwan Le Ray
[ Upstream commit 391e437eedc0dab0a9f2c26997e68e040ae04ea3 ]
Fix uart7_pins_a comments to indicate UART7 pins instead of UART4 pins.
Fixes: bf4b5f379fed ("ARM: dts: stm32: Add missing pinctrl definitions for
STM32MP157")
Signed-off-by: Erwan Le Ray
Signed-off-by: Alexandre
From: Tiezhu Yang
[ Upstream commit 66a535c495f72e1deacc37dfa34acca2a06e3578 ]
Check the return value of irq_domain_translate_twocell() due to
it may returns -EINVAL if failed and use variable fwspec for it,
and then use a new variable parent_fwspec which is proper for
irq_domain_alloc_irqs_pare
From: Vincent Guittot
[ Upstream commit 3ea2f097b17e13a8280f1f9386c331b326a3dbef ]
With commit:
'b7031a02ec75 ("sched/fair: Add NOHZ_STATS_KICK")'
rebalance_domains of the local cfs_rq happens before others idle cpus have
updated nohz.next_balance and its value is overwritten.
Move the update
From: Jon Lin
[ Upstream commit 4294e4accf8d695ea5605f6b189008b692e3e82c ]
The RXFLR is possible larger than rx_left in Rockchip SPI, fix it.
Fixes: 01b59ce5dac8 ("spi: rockchip: use irq rather than polling")
Signed-off-by: Jon Lin
Tested-by: Emil Renner Berthing
Reviewed-by: Heiko Stuebner
From: Sibi Sankar
[ Upstream commit 72fe996f9643043c8f84e32c0610975b01aa555b ]
The Protection Domains (PD) have a mechanism to keep its resources
enabled until the PD down indication is acked. Reorder the PD state
indication ack so that clients get to release the relevant resources
before the PD
From: Niklas Söderlund
[ Upstream commit 59692ac5a7bb8c97ff440fc8917828083fbc38d6 ]
When adding the adv7612 device node the ports node was misspelled as
port, fix this.
Fixes: bc63cd87f3ce924f ("ARM: dts: gose: add HDMI input")
Signed-off-by: Niklas Söderlund
Link:
https://lore.kernel.org/r/2
From: Gregory Herrero
[ Upstream commit ea0eada45632f4807b2f49de951072283e2d781c ]
Currently, if a section has a relocation to '_mcount' symbol, a new
__mcount_loc entry will be added whatever the relocation type is.
This is problematic when a relocation to '_mcount' is in the middle of a
sectio
From: Sagi Grimberg
[ Upstream commit 9f98772ba307dd89a3d17dc2589f213d3972fc64 ]
commit fe35ec58f0d3 ("block: update hctx map when use multiple maps")
exposed an issue where we may hang trying to wait for queue freeze
during I/O. We call blk_mq_update_nr_hw_queues which in case of multiple
queue
From: Chengming Zhou
[ Upstream commit d9012a59db54442d5b2fcfdfcded35cf566397d3 ]
We shouldn't skip iocg when its abs_vdebt is not zero.
Fixes: 0b80f9866e6b ("iocost: protect iocg->abs_vdebt with iocg->waitq.lock")
Signed-off-by: Chengming Zhou
Acked-by: Tejun Heo
Signed-off-by: Jens Axboe
S
From: Brendan Higgins
[ Upstream commit d43c7fb05765152d4d4a39a8ef957c4ea14d8847 ]
Commit 01397e822af4 ("kunit: Fix TabError, remove defconfig code and
handle when there is no kunitconfig") and commit 45ba7a893ad8 ("kunit:
kunit_tool: Separate out config/build/exec/parse") introduced two
closely
From: Zenghui Yu
[ Upstream commit d1bd7e0ba533a2a6f313579ec9b504f6614c35c4 ]
Booting the latest kernel with DEBUG_ATOMIC_SLEEP=y on a GICv4.1 enabled
box, I get the following kernel splat:
[0.053766] BUG: sleeping function called from invalid context at
mm/slab.h:567
[0.053767] in_ato
From: Qiushi Wu
[ Upstream commit 17ed808ad243192fb923e4e653c1338d3ba06207 ]
When kobject_init_and_add() returns an error, it should be handled
because kobject_init_and_add() takes a reference even when it fails. If
this function returns an error, kobject_put() must be called to properly
clean u
From: Marek Szyprowski
[ Upstream commit 9ff416cf45a08f28167b75045222c762a0347930 ]
Commit 1019fe2c7280 ("ARM: dts: exynos: Adjust bus related OPPs to the
values correct for Exynos5422 Odroids") changed the parameters of the
OPPs for the FSYS bus. Besides the frequency adjustments, it also remov
From: Heiko Stuebner
[ Upstream commit 2300e6dab473e93181cf76e4fe6671aa3d24c57b ]
The lion gmac node currently uses opposite active-values for the
gmac phy reset pin. The gpio-declaration uses active-high while the
separate snps,reset-active-low property marks the pin as active low.
While on th
From: Peng Liu
[ Upstream commit 9b1b234bb86bcdcdb142e900d39b599185465dbb ]
During sched domain init, we check whether non-topological SD_flags are
returned by tl->sd_flags(), if found, fire a waning and correct the
violation, but the code failed to correct the violation. Correct this.
Fixes: 1
From: Finn Thain
[ Upstream commit 931fc82a6aaf4e2e4a5490addaa6a090d78c24a7 ]
When writing values to the IOP status/control register make sure those
values do not have any extraneous bits that will clear interrupt flags.
To place the SCC IOP into bypass mode would be desirable but this is not
a
From: Stephan Gerhold
[ Upstream commit 1b6a1a162defe649c5599d661b58ac64bb6f31b6 ]
msm8916-pins.dtsi specifies "bias-pull-none" for most of the audio
pin configurations. This was likely copied from the qcom kernel fork
where the same property was used for these audio pins.
However, "bias-pull-n
From: Herbert Xu
[ Upstream commit 3906f640224dbe7714b52b66d7d68c0812808e19 ]
The crypto notify call occurs with a read mutex held so you must
not do any substantial work directly. In particular, you cannot
call crypto_alloc_* as they may trigger further notifications
which may dead-lock in the
From: Chen-Yu Tsai
[ Upstream commit e4dae01bf08b754de79072441c357737220b873f ]
The Bananapi M2+ uses a GPIO line to change the effective resistance of
the CPU supply regulator's feedback resistor network. The voltages
described in the device tree were given directly by the vendor. This
turns ou
From: Lu Wei
[ Upstream commit 64dd4a5a7d214a07e3d9f40227ec30ac8ba8796e ]
In the function check_acpi_dev(), if it fails to create
platform device, the return value is ERR_PTR() or NULL.
Thus it must use IS_ERR_OR_NULL() to check return value.
Fixes: 332e081225fc ("intel-vbtn: new driver for Int
From: Yoshihiro Shimoda
[ Upstream commit a6cb262af1e1adfa6287cb43f09021ee42beb21c ]
Fix the device node names as "mmc@".
Fixes: 663386c3e1aa ("arm64: dts: renesas: r8a774a1: Add SDHI nodes")
Fixes: 9b33e3001b67 ("arm64: dts: renesas: Initial r8a774b1 SoC device tree")
Fixes: 77223211f44d ("arm
From: Marek Szyprowski
[ Upstream commit ea9dd8f61c8a890843f68e8dc0062ce78365aab8 ]
Call exynos_cpu_power_up(cpunr) unconditionally. This is needed by the
big.LITTLE cpuidle driver and has no side-effects on other code paths.
The additional soft-reset call during little core power up has been a
From: Qais Yousef
[ Upstream commit d81ae8aac85ca2e307d273f6dc7863a721bf054e ]
struct uclamp_rq was zeroed out entirely in assumption that in the first
call to uclamp_rq_inc() they'd be initialized correctly in accordance to
default settings.
But when next patch introduces a static key to skip
From: Gilad Ben-Yossef
[ Upstream commit 9bc6165d608d676f05d8bf156a2c9923ee38d05b ]
Fix a small resource leak on the error path of cipher processing.
Signed-off-by: Gilad Ben-Yossef
Fixes: 63ee04c8b491e ("crypto: ccree - add skcipher support")
Cc: Markus Elfring
Signed-off-by: Herbert Xu
Sig
From: yu kuai
[ Upstream commit f87a4f022c44e5b87e842a9f3e644fba87e8385f ]
if of_find_device_by_node() succeed, at91_pm_sram_init() doesn't have
a corresponding put_device(). Thus add a jump target to fix the exception
handling for this function implementation.
Fixes: d2e467905596 ("ARM: at91:
From: Luis Chamberlain
[ Upstream commit bad8e64fb19d3a0de5e564d9a7271c31bd684369 ]
On commit 6ac93117ab00 ("blktrace: use existing disk debugfs directory")
merged on v4.12 Omar fixed the original blktrace code for request-based
drivers (multiqueue). This however left in place a possible crash,
From: Zhenzhong Duan
[ Upstream commit 5d7f7d1d5e01c22894dee7c9c9266500478dca99 ]
The original code is a nop as i_mce.status is or'ed with part of itself,
fix it.
Fixes: a1300e505297 ("x86/ras/mce_amd_inj: Trigger deferred and thresholding
errors interrupts")
Signed-off-by: Zhenzhong Duan
Sig
From: Luis Chamberlain
[ Upstream commit bad8e64fb19d3a0de5e564d9a7271c31bd684369 ]
On commit 6ac93117ab00 ("blktrace: use existing disk debugfs directory")
merged on v4.12 Omar fixed the original blktrace code for request-based
drivers (multiqueue). This however left in place a possible crash,
From: Florian Fainelli
[ Upstream commit 9808357ff2e5bfe1e0dcafef5e78cc5b617a7078 ]
cpu_logical_map is only defined for CONFIG_SMP builds, when we are in an
UP configuration, the boot CPU is 0.
Fixes: 6468fc18b006 ("irqchip/irq-bcm7038-l1: Add PM support")
Reported-by: kernel test robot
Signed
From: Chengming Zhou
[ Upstream commit d9012a59db54442d5b2fcfdfcded35cf566397d3 ]
We shouldn't skip iocg when its abs_vdebt is not zero.
Fixes: 0b80f9866e6b ("iocost: protect iocg->abs_vdebt with iocg->waitq.lock")
Signed-off-by: Chengming Zhou
Acked-by: Tejun Heo
Signed-off-by: Jens Axboe
S
From: Sibi Sankar
[ Upstream commit 72fe996f9643043c8f84e32c0610975b01aa555b ]
The Protection Domains (PD) have a mechanism to keep its resources
enabled until the PD down indication is acked. Reorder the PD state
indication ack so that clients get to release the relevant resources
before the PD
From: Hannes Reinecke
[ Upstream commit fbd6a42d8932e172921c7de10468a2e12c34846b ]
When nvme_round_robin_path() finds a valid namespace we should be using it;
falling back to __nvme_find_path() for non-optimized paths will cause the
result from nvme_round_robin_path() to be ignored for non-optim
From: Sagi Grimberg
[ Upstream commit 2875b0aecabe2f081a8432e2bc85b85df0529490 ]
commit fe35ec58f0d3 ("block: update hctx map when use multiple maps")
exposed an issue where we may hang trying to wait for queue freeze
during I/O. We call blk_mq_update_nr_hw_queues which in case of multiple
queue
From: Gilad Ben-Yossef
[ Upstream commit 9bc6165d608d676f05d8bf156a2c9923ee38d05b ]
Fix a small resource leak on the error path of cipher processing.
Signed-off-by: Gilad Ben-Yossef
Fixes: 63ee04c8b491e ("crypto: ccree - add skcipher support")
Cc: Markus Elfring
Signed-off-by: Herbert Xu
Sig
From: Vladimir Zapolskiy
[ Upstream commit 9177514ce34902b3adb2abd490b6ad05d1cfcb43 ]
The change corrects registration and deregistration on error path
of a regulator, the problem was manifested by a reported memory
leak on deferred probe:
as3722-regulator as3722-regulator: regulator 13 reg
From: Gregory Herrero
[ Upstream commit ea0eada45632f4807b2f49de951072283e2d781c ]
Currently, if a section has a relocation to '_mcount' symbol, a new
__mcount_loc entry will be added whatever the relocation type is.
This is problematic when a relocation to '_mcount' is in the middle of a
sectio
From: Alim Akhtar
[ Upstream commit b072714bfc0e42c984b8fd6e069f3ca17de8137a ]
Once regulators are disabled after kernel boot, on Espresso board silent
hang observed because of LDO7 being disabled. LDO7 actually provide
power to CPU cores and non-cpu blocks circuitries. Keep this regulator
alw
From: Heiko Stuebner
[ Upstream commit 8a445086f8af0b7b9bd8d1901d6f306bb154f70d ]
The puma gmac node currently uses opposite active-values for the
gmac phy reset pin. The gpio-declaration uses active-high while the
separate snps,reset-active-low property marks the pin as active low.
While on th
From: Stephen Smalley
[ Upstream commit 382c2b5d23b4245f1818f69286db334355488dc4 ]
commit e3e0b582c321 ("selinux: remove unused initial SIDs and improve
handling") broke scripts/selinux/mdp since the unused initial SID names
were removed and the corresponding generation of policy initial SID
def
From: Niklas Söderlund
[ Upstream commit 59692ac5a7bb8c97ff440fc8917828083fbc38d6 ]
When adding the adv7612 device node the ports node was misspelled as
port, fix this.
Fixes: bc63cd87f3ce924f ("ARM: dts: gose: add HDMI input")
Signed-off-by: Niklas Söderlund
Link:
https://lore.kernel.org/r/2
From: yu kuai
[ Upstream commit f87a4f022c44e5b87e842a9f3e644fba87e8385f ]
if of_find_device_by_node() succeed, at91_pm_sram_init() doesn't have
a corresponding put_device(). Thus add a jump target to fix the exception
handling for this function implementation.
Fixes: d2e467905596 ("ARM: at91:
From: Yu Kuai
[ Upstream commit 3ad7b4e8f89d6bcc9887ca701cf2745a6aedb1a0 ]
if of_find_device_by_node() succeed, socfpga_setup_ocram_self_refresh
doesn't have a corresponding put_device(). Thus add a jump target to
fix the exception handling for this function implementation.
Fixes: 44fd8c7d4005
From: Chen-Yu Tsai
[ Upstream commit 55b271af765b0e03d1ff29502f81644b1a3c87fd ]
The device tree currently only assigns the a supply for the first CPU
core, when in reality the regulator supply is shared by all four cores.
This might cause an issue if the implementation does not realize the
shari
From: Herbert Xu
[ Upstream commit 3906f640224dbe7714b52b66d7d68c0812808e19 ]
The crypto notify call occurs with a read mutex held so you must
not do any substantial work directly. In particular, you cannot
call crypto_alloc_* as they may trigger further notifications
which may dead-lock in the
From: Vladimir Zapolskiy
[ Upstream commit 9177514ce34902b3adb2abd490b6ad05d1cfcb43 ]
The change corrects registration and deregistration on error path
of a regulator, the problem was manifested by a reported memory
leak on deferred probe:
as3722-regulator as3722-regulator: regulator 13 reg
From: Sudeep Holla
[ Upstream commit fcd2e0deae50bce48450f14c8fc5611b08d7438c ]
Currently we are not initializing the scmi clock with discrete rates
correctly. We fetch the min_rate and max_rate value only for clocks with
ranges and ignore the ones with discrete rates. This will lead to wrong
in
From: Vincent Guittot
[ Upstream commit 3ea2f097b17e13a8280f1f9386c331b326a3dbef ]
With commit:
'b7031a02ec75 ("sched/fair: Add NOHZ_STATS_KICK")'
rebalance_domains of the local cfs_rq happens before others idle cpus have
updated nohz.next_balance and its value is overwritten.
Move the update
From: Qais Yousef
[ Upstream commit d81ae8aac85ca2e307d273f6dc7863a721bf054e ]
struct uclamp_rq was zeroed out entirely in assumption that in the first
call to uclamp_rq_inc() they'd be initialized correctly in accordance to
default settings.
But when next patch introduces a static key to skip
From: Finn Thain
[ Upstream commit aeb445bf2194d83e12e85bf5c65baaf1f093bd8f ]
In the following sequence of calls, iop_do_send() gets called when the
"send" channel is not in the IOP_MSG_IDLE state:
iop_ism_irq()
iop_handle_send()
(msg->handler)()
From: Kees Cook
[ Upstream commit 47e33c05f9f07cac3de833e531bcac9ae052c7ca ]
When SECCOMP_IOCTL_NOTIF_ID_VALID was first introduced it had the wrong
direction flag set. While this isn't a big deal as nothing currently
enforces these bits in the kernel, it should be defined correctly. Fix
the def
From: Heiko Stuebner
[ Upstream commit 7a7184f6cfa9279f1a1c10a1845d247d7fad54ff ]
The puma vcc5v0_host regulator node currently uses opposite active-values
for the enable pin. The gpio-declaration uses active-high while the
separate enable-active-low property marks the pin as active low.
While
From: Dilip Kota
[ Upstream commit 661ccf2b3f1360be50242726f7c26ced6a9e7d52 ]
In full duplex mode, rx overflow error is observed. To overcome the error,
wait until the complete data got received and proceed further.
Fixes: 17f84b793c01 ("spi: lantiq-ssc: add support for Lantiq SSC SPI
controll
From: Lu Wei
[ Upstream commit 64dd4a5a7d214a07e3d9f40227ec30ac8ba8796e ]
In the function check_acpi_dev(), if it fails to create
platform device, the return value is ERR_PTR() or NULL.
Thus it must use IS_ERR_OR_NULL() to check return value.
Fixes: 332e081225fc ("intel-vbtn: new driver for Int
From: Alim Akhtar
[ Upstream commit b072714bfc0e42c984b8fd6e069f3ca17de8137a ]
Once regulators are disabled after kernel boot, on Espresso board silent
hang observed because of LDO7 being disabled. LDO7 actually provide
power to CPU cores and non-cpu blocks circuitries. Keep this regulator
alw
From: Stephan Gerhold
[ Upstream commit 1b6a1a162defe649c5599d661b58ac64bb6f31b6 ]
msm8916-pins.dtsi specifies "bias-pull-none" for most of the audio
pin configurations. This was likely copied from the qcom kernel fork
where the same property was used for these audio pins.
However, "bias-pull-n
From: Heiko Stuebner
[ Upstream commit 2300e6dab473e93181cf76e4fe6671aa3d24c57b ]
The lion gmac node currently uses opposite active-values for the
gmac phy reset pin. The gpio-declaration uses active-high while the
separate snps,reset-active-low property marks the pin as active low.
While on th
From: Yu Kuai
[ Upstream commit 3ad7b4e8f89d6bcc9887ca701cf2745a6aedb1a0 ]
if of_find_device_by_node() succeed, socfpga_setup_ocram_self_refresh
doesn't have a corresponding put_device(). Thus add a jump target to
fix the exception handling for this function implementation.
Fixes: 44fd8c7d4005
From: Alim Akhtar
[ Upstream commit b072714bfc0e42c984b8fd6e069f3ca17de8137a ]
Once regulators are disabled after kernel boot, on Espresso board silent
hang observed because of LDO7 being disabled. LDO7 actually provide
power to CPU cores and non-cpu blocks circuitries. Keep this regulator
alw
From: Finn Thain
[ Upstream commit aeb445bf2194d83e12e85bf5c65baaf1f093bd8f ]
In the following sequence of calls, iop_do_send() gets called when the
"send" channel is not in the IOP_MSG_IDLE state:
iop_ism_irq()
iop_handle_send()
(msg->handler)()
From: Alim Akhtar
[ Upstream commit b072714bfc0e42c984b8fd6e069f3ca17de8137a ]
Once regulators are disabled after kernel boot, on Espresso board silent
hang observed because of LDO7 being disabled. LDO7 actually provide
power to CPU cores and non-cpu blocks circuitries. Keep this regulator
alw
From: Finn Thain
[ Upstream commit 931fc82a6aaf4e2e4a5490addaa6a090d78c24a7 ]
When writing values to the IOP status/control register make sure those
values do not have any extraneous bits that will clear interrupt flags.
To place the SCC IOP into bypass mode would be desirable but this is not
a
From: Lu Wei
[ Upstream commit 64dd4a5a7d214a07e3d9f40227ec30ac8ba8796e ]
In the function check_acpi_dev(), if it fails to create
platform device, the return value is ERR_PTR() or NULL.
Thus it must use IS_ERR_OR_NULL() to check return value.
Fixes: 332e081225fc ("intel-vbtn: new driver for Int
From: yu kuai
[ Upstream commit f87a4f022c44e5b87e842a9f3e644fba87e8385f ]
if of_find_device_by_node() succeed, at91_pm_sram_init() doesn't have
a corresponding put_device(). Thus add a jump target to fix the exception
handling for this function implementation.
Fixes: d2e467905596 ("ARM: at91:
From: Lu Wei
[ Upstream commit 71fbe886ce6dd0be17f20aded9c63fe58edd2806 ]
In the function check_acpi_dev(), if it fails to create
platform device, the return value is ERR_PTR() or NULL.
Thus it must use IS_ERR_OR_NULL() to check return value.
Fixes: ecc83e52b28c ("intel-hid: new hid event drive
From: Finn Thain
[ Upstream commit aeb445bf2194d83e12e85bf5c65baaf1f093bd8f ]
In the following sequence of calls, iop_do_send() gets called when the
"send" channel is not in the IOP_MSG_IDLE state:
iop_ism_irq()
iop_handle_send()
(msg->handler)()
From: yu kuai
[ Upstream commit f87a4f022c44e5b87e842a9f3e644fba87e8385f ]
if of_find_device_by_node() succeed, at91_pm_sram_init() doesn't have
a corresponding put_device(). Thus add a jump target to fix the exception
handling for this function implementation.
Fixes: d2e467905596 ("ARM: at91:
From: yu kuai
[ Upstream commit f87a4f022c44e5b87e842a9f3e644fba87e8385f ]
if of_find_device_by_node() succeed, at91_pm_sram_init() doesn't have
a corresponding put_device(). Thus add a jump target to fix the exception
handling for this function implementation.
Fixes: d2e467905596 ("ARM: at91:
From: Dilip Kota
[ Upstream commit 661ccf2b3f1360be50242726f7c26ced6a9e7d52 ]
In full duplex mode, rx overflow error is observed. To overcome the error,
wait until the complete data got received and proceed further.
Fixes: 17f84b793c01 ("spi: lantiq-ssc: add support for Lantiq SSC SPI
controll
From: Yu Kuai
[ Upstream commit 3ad7b4e8f89d6bcc9887ca701cf2745a6aedb1a0 ]
if of_find_device_by_node() succeed, socfpga_setup_ocram_self_refresh
doesn't have a corresponding put_device(). Thus add a jump target to
fix the exception handling for this function implementation.
Fixes: 44fd8c7d4005
From: Qiushi Wu
[ Upstream commit 17ed808ad243192fb923e4e653c1338d3ba06207 ]
When kobject_init_and_add() returns an error, it should be handled
because kobject_init_and_add() takes a reference even when it fails. If
this function returns an error, kobject_put() must be called to properly
clean u
From: Qiushi Wu
[ Upstream commit 17ed808ad243192fb923e4e653c1338d3ba06207 ]
When kobject_init_and_add() returns an error, it should be handled
because kobject_init_and_add() takes a reference even when it fails. If
this function returns an error, kobject_put() must be called to properly
clean u
From: Finn Thain
[ Upstream commit 931fc82a6aaf4e2e4a5490addaa6a090d78c24a7 ]
When writing values to the IOP status/control register make sure those
values do not have any extraneous bits that will clear interrupt flags.
To place the SCC IOP into bypass mode would be desirable but this is not
a
From: Yu Kuai
[ Upstream commit 3ad7b4e8f89d6bcc9887ca701cf2745a6aedb1a0 ]
if of_find_device_by_node() succeed, socfpga_setup_ocram_self_refresh
doesn't have a corresponding put_device(). Thus add a jump target to
fix the exception handling for this function implementation.
Fixes: 44fd8c7d4005
From: Vincent Guittot
[ Upstream commit 3ea2f097b17e13a8280f1f9386c331b326a3dbef ]
With commit:
'b7031a02ec75 ("sched/fair: Add NOHZ_STATS_KICK")'
rebalance_domains of the local cfs_rq happens before others idle cpus have
updated nohz.next_balance and its value is overwritten.
Move the update
From: Peng Liu
[ Upstream commit 9b1b234bb86bcdcdb142e900d39b599185465dbb ]
During sched domain init, we check whether non-topological SD_flags are
returned by tl->sd_flags(), if found, fire a waning and correct the
violation, but the code failed to correct the violation. Correct this.
Fixes: 1
From: Stephan Gerhold
[ Upstream commit 1b6a1a162defe649c5599d661b58ac64bb6f31b6 ]
msm8916-pins.dtsi specifies "bias-pull-none" for most of the audio
pin configurations. This was likely copied from the qcom kernel fork
where the same property was used for these audio pins.
However, "bias-pull-n
From: Lu Wei
[ Upstream commit 64dd4a5a7d214a07e3d9f40227ec30ac8ba8796e ]
In the function check_acpi_dev(), if it fails to create
platform device, the return value is ERR_PTR() or NULL.
Thus it must use IS_ERR_OR_NULL() to check return value.
Fixes: 332e081225fc ("intel-vbtn: new driver for Int
From: Qiushi Wu
[ Upstream commit 17ed808ad243192fb923e4e653c1338d3ba06207 ]
When kobject_init_and_add() returns an error, it should be handled
because kobject_init_and_add() takes a reference even when it fails. If
this function returns an error, kobject_put() must be called to properly
clean u
From: Lu Wei
[ Upstream commit 71fbe886ce6dd0be17f20aded9c63fe58edd2806 ]
In the function check_acpi_dev(), if it fails to create
platform device, the return value is ERR_PTR() or NULL.
Thus it must use IS_ERR_OR_NULL() to check return value.
Fixes: ecc83e52b28c ("intel-hid: new hid event drive
From: Gilad Ben-Yossef
[ Upstream commit 9bc6165d608d676f05d8bf156a2c9923ee38d05b ]
Fix a small resource leak on the error path of cipher processing.
Signed-off-by: Gilad Ben-Yossef
Fixes: 63ee04c8b491e ("crypto: ccree - add skcipher support")
Cc: Markus Elfring
Signed-off-by: Herbert Xu
Sig
From: Finn Thain
[ Upstream commit aeb445bf2194d83e12e85bf5c65baaf1f093bd8f ]
In the following sequence of calls, iop_do_send() gets called when the
"send" channel is not in the IOP_MSG_IDLE state:
iop_ism_irq()
iop_handle_send()
(msg->handler)()
From: Niklas Söderlund
[ Upstream commit 59692ac5a7bb8c97ff440fc8917828083fbc38d6 ]
When adding the adv7612 device node the ports node was misspelled as
port, fix this.
Fixes: bc63cd87f3ce924f ("ARM: dts: gose: add HDMI input")
Signed-off-by: Niklas Söderlund
Link:
https://lore.kernel.org/r/2
From: Sudeep Holla
[ Upstream commit fcd2e0deae50bce48450f14c8fc5611b08d7438c ]
Currently we are not initializing the scmi clock with discrete rates
correctly. We fetch the min_rate and max_rate value only for clocks with
ranges and ignore the ones with discrete rates. This will lead to wrong
in
From: Heiko Stuebner
[ Upstream commit 8a445086f8af0b7b9bd8d1901d6f306bb154f70d ]
The puma gmac node currently uses opposite active-values for the
gmac phy reset pin. The gpio-declaration uses active-high while the
separate snps,reset-active-low property marks the pin as active low.
While on th
From: Zhenzhong Duan
[ Upstream commit 5d7f7d1d5e01c22894dee7c9c9266500478dca99 ]
The original code is a nop as i_mce.status is or'ed with part of itself,
fix it.
Fixes: a1300e505297 ("x86/ras/mce_amd_inj: Trigger deferred and thresholding
errors interrupts")
Signed-off-by: Zhenzhong Duan
Sig
From: yu kuai
[ Upstream commit f87a4f022c44e5b87e842a9f3e644fba87e8385f ]
if of_find_device_by_node() succeed, at91_pm_sram_init() doesn't have
a corresponding put_device(). Thus add a jump target to fix the exception
handling for this function implementation.
Fixes: d2e467905596 ("ARM: at91:
From: Qiushi Wu
[ Upstream commit 17ed808ad243192fb923e4e653c1338d3ba06207 ]
When kobject_init_and_add() returns an error, it should be handled
because kobject_init_and_add() takes a reference even when it fails. If
this function returns an error, kobject_put() must be called to properly
clean u
From: Lu Wei
[ Upstream commit 71fbe886ce6dd0be17f20aded9c63fe58edd2806 ]
In the function check_acpi_dev(), if it fails to create
platform device, the return value is ERR_PTR() or NULL.
Thus it must use IS_ERR_OR_NULL() to check return value.
Fixes: ecc83e52b28c ("intel-hid: new hid event drive
From: Finn Thain
[ Upstream commit 931fc82a6aaf4e2e4a5490addaa6a090d78c24a7 ]
When writing values to the IOP status/control register make sure those
values do not have any extraneous bits that will clear interrupt flags.
To place the SCC IOP into bypass mode would be desirable but this is not
a
From: Yu Kuai
[ Upstream commit 3ad7b4e8f89d6bcc9887ca701cf2745a6aedb1a0 ]
if of_find_device_by_node() succeed, socfpga_setup_ocram_self_refresh
doesn't have a corresponding put_device(). Thus add a jump target to
fix the exception handling for this function implementation.
Fixes: 44fd8c7d4005
From: Stephan Gerhold
[ Upstream commit 1b6a1a162defe649c5599d661b58ac64bb6f31b6 ]
msm8916-pins.dtsi specifies "bias-pull-none" for most of the audio
pin configurations. This was likely copied from the qcom kernel fork
where the same property was used for these audio pins.
However, "bias-pull-n
From: Niklas Söderlund
[ Upstream commit d344234abde938ae1062edb6c05852b0bafb4a03 ]
When adding the adv7180 device node the ports node was misspelled as
port, fix this.
Fixes: 8cae359049a88b75 ("ARM: dts: gose: add composite video input")
Signed-off-by: Niklas Söderlund
Link:
https://lore.ker
From: Jon Lin
[ Upstream commit 4294e4accf8d695ea5605f6b189008b692e3e82c ]
The RXFLR is possible larger than rx_left in Rockchip SPI, fix it.
Fixes: 01b59ce5dac8 ("spi: rockchip: use irq rather than polling")
Signed-off-by: Jon Lin
Tested-by: Emil Renner Berthing
Reviewed-by: Heiko Stuebner
From: Finn Thain
[ Upstream commit 931fc82a6aaf4e2e4a5490addaa6a090d78c24a7 ]
When writing values to the IOP status/control register make sure those
values do not have any extraneous bits that will clear interrupt flags.
To place the SCC IOP into bypass mode would be desirable but this is not
a
From: Heiko Stuebner
[ Upstream commit 7a7184f6cfa9279f1a1c10a1845d247d7fad54ff ]
The puma vcc5v0_host regulator node currently uses opposite active-values
for the enable pin. The gpio-declaration uses active-high while the
separate enable-active-low property marks the pin as active low.
While
From: Zhenzhong Duan
[ Upstream commit 5d7f7d1d5e01c22894dee7c9c9266500478dca99 ]
The original code is a nop as i_mce.status is or'ed with part of itself,
fix it.
Fixes: a1300e505297 ("x86/ras/mce_amd_inj: Trigger deferred and thresholding
errors interrupts")
Signed-off-by: Zhenzhong Duan
Sig
From: Hannes Reinecke
[ Upstream commit fbd6a42d8932e172921c7de10468a2e12c34846b ]
When nvme_round_robin_path() finds a valid namespace we should be using it;
falling back to __nvme_find_path() for non-optimized paths will cause the
result from nvme_round_robin_path() to be ignored for non-optim
From: Martin Wilck
[ Upstream commit 3f6e3246db0e6f92e784965d9d0edb8abe6c6b74 ]
Handle the special case where we have exactly one optimized path,
which we should keep using in this case.
Fixes: 75c10e732724 ("nvme-multipath: round-robin I/O policy")
Signed off-by: Martin Wilck
Signed-off-by: H
From: Peng Liu
[ Upstream commit 9b1b234bb86bcdcdb142e900d39b599185465dbb ]
During sched domain init, we check whether non-topological SD_flags are
returned by tl->sd_flags(), if found, fire a waning and correct the
violation, but the code failed to correct the violation. Correct this.
Fixes: 1
201 - 300 of 453 matches
Mail list logo
