[AMD Official Use Only - Internal Distribution Only]
So Actually for rt5682 codec Now in 5.8 there are three flags :
SND_SOC_RT5682
SND_SOC_RT5682_I2C
SND_SOC_RT5682_SDW
But till 5.7.8 we have
SND_SOC_RT5682
SND_SOC_RT5682_SDW
So in our design we were using SND_SOC_RT5682 which build snd_soc_rt5
Hi Brian Norris,
I'm wishing to change a driver from using "hard_header_len" to using
"needed_headroom" to declare its needed headroom. I submitted a patch
and it is decided it needs to be reviewed. I see you submitted a similar
patch in the past. So I think you might be able to help review my pat
The scope of select_idle_sibling idle cpu search is LLC. This
becomes a problem for the AMD CCX architecture, as the sd_llc is only
4 cores. On a many core machine, the range of search is too small to
reach a satisfactory level of statistical multiplexing / efficient
utilization of short idle time
On 06.07.20 18:41, Alan Stern wrote:
> On Tue, Jun 30, 2020 at 20:49:58PM -0400, Alan Stern wrote:
>> On Tue, Jun 30, 2020 at 04:31:58PM -0700, Bart Van Assche wrote:
>>> On 2020-06-30 12:38, Alan Stern wrote:
Assume that BLK_MQ_REQ_PREEMPT is set in flags. Then where exactly
does blk_q
Hi Abhishek,
> Unregister from suspend notifications and cancel suspend preparations
> before running hci_dev_do_close. Otherwise, the suspend notifier may
> race with unregister and cause cmd_timeout even after hdev has been
> freed.
>
> Signed-off-by: Abhishek Pandit-Subedi
> Reviewed-by: Miao
On Mon, 27 Jul 2020, Linus Walleij wrote:
> This converts the DaVinci DM355EVM LEDs to use GPIO
> descriptor look-ups.
>
> Cc: Sekhar Nori
> Cc: Bartosz Golaszewski
> Signed-off-by: Linus Walleij
> ---
> drivers/mfd/dm355evm_msp.c | 49 --
> 1 file changed,
Hello Martin,
On Mon, Jul 27, 2020 at 11:16:57PM +0200, Martin Botka wrote:
> Mo 27. 7. 2020 at 22:10 Uwe Kleine-König
> wrote:
> >
> > On Fri, Jul 24, 2020 at 11:36:53PM +0200, Martin Botka wrote:
> > > From: Fenglin Wu
> > >
> > > Add pwm_chip to support QTI LPG module and export LPG channels
Hi Boris,
On Sun, Jul 12, 2020 at 9:01 AM Souptick Joarder wrote:
>
> This series contains few clean up, minor bug fixes and
> Convert get_user_pages() to pin_user_pages().
>
> I'm compile tested this, but unable to run-time test,
> so any testing help is much appriciated.
>
> v2:
> Addre
On Mon, Jul 27, 2020 at 11:42:17PM -0700, Rustam Kovhaev wrote:
> in case of an error tty_register_device_attr() returns ERR_PTR(),
> add IS_ERR() check
>
> Reported-and-tested-by: syzbot+67b2bd0e34f952d03...@syzkaller.appspotmail.com
> Link: https://syzkaller.appspot.com/bug?extid=67b2bd0e34f952d
Hi Nicolas,
> HCI_UART_RESET_ON_INIT belongs in hdev_flags, not flags.
>
> Fixes: ce945552fde4a09 ("Bluetooth: hci_h5: Add support for serdev enumerated
> devices")
> Signed-off-by: Nicolas Boichat
>
> ---
>
> drivers/bluetooth/hci_h5.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Hi Max,
> The original return is NOTIFY_STOP, but notifier_call_chain would stop
> the future call for register_pm_notifier even registered on other Kernel
> modules with the same priority which value is zero.
>
> Signed-off-by: Max Chou
> ---
> net/bluetooth/hci_core.c | 2 +-
> 1 file changed,
On Tue, Jul 28, 2020 at 08:40:25AM +0200, Jiri Slaby wrote:
> On 28. 07. 20, 8:20, Christoph Hellwig wrote:
> > On Tue, Jul 28, 2020 at 08:05:36AM +0200, Jiri Slaby wrote:
> >> On 27. 07. 20, 15:05, Christoph Hellwig wrote:
> >>> Since commit 1355cba9c3ba ("tty/synclink: remove ISA support"), the
>
在 2020/7/28 上午7:34, Alexander Duyck 写道:
>> @@ -847,11 +847,21 @@ static bool too_many_isolated(pg_data_t *pgdat)
>> * contention, to give chance to IRQs. Abort completely if
>> * a fatal signal is pending.
>> */
>> - if (!(low_pfn
Hi Nicolas,
> We should not call hci_unregister_dev if the device was not
> successfully registered.
>
> Fixes: c34dc3bfa7642fd ("Bluetooth: hci_serdev: Introduce
> hci_uart_unregister_device()")
> Signed-off-by: Nicolas Boichat
>
> ---
>
> drivers/bluetooth/hci_serdev.c | 3 ++-
> 1 file chan
On Sun, 26 Jul 2020, Michael Walle wrote:
> There are I2C devices which contain several different functions but
> doesn't require any special access functions. For these kind of drivers
> an I2C regmap should be enough.
>
> Create an I2C driver which creates an I2C regmap and enumerates its
> chi
On 2020-07-28 11:58, Bjorn Andersson wrote:
On Mon 27 Jul 21:40 PDT 2020, Sai Prakash Ranjan wrote:
On 2020-07-28 02:28, Bjorn Andersson wrote:
> On Tue 23 Jun 23:56 PDT 2020, Sai Prakash Ranjan wrote:
>
> > Hi Bjorn,
> >
> > On 2020-06-21 13:39, Sai Prakash Ranjan wrote:
> > > Hi Bjorn,
> > >
On Mon, Jul 27, 2020 at 08:11:09AM +, Peng Fan wrote:
> > Subject: Re: [PATCH 03/10] remoteproc: imx: use devm_ioremap
> >
> > On Mon, Jul 27, 2020 at 06:51:00AM +, Peng Fan wrote:
> > > > Subject: Re: [PATCH 03/10] remoteproc: imx: use devm_ioremap
> > > >
> > > > On Mon, Jul 27, 2020 at
The variable authmode can be uninitialized. The danger would be if
it equals to _WPA_IE_ID_ (0xdd) or _WPA2_IE_ID_ (0x33). We can avoid
this by setting it to zero instead. This is the approach that was
used in the rtl8723bs driver.
Fixes: 7b464c9fa5cc ("staging: r8188eu: Add files for new driver -
On Sun, 26 Jul 2020, Michael Walle wrote:
> Add a device tree bindings for the board management controller found on
> the Kontron SMARC-sAL28 board.
>
> Signed-off-by: Michael Walle
> Reviewed-by: Rob Herring
> ---
> Changes since v5:
> - none
>
> Changes since v4:
> - fix the regex of the u
On Sun, 26 Jul 2020, Michael Walle wrote:
> Add the core support for the board management controller found on the
> SMARC-sAL28 board.
>
> At the moment, this controller is used on the Kontron SMARC-sAL28 board.
>
> Signed-off-by: Michael Walle
> ---
> Changes since v5:
> - none
>
> Changes s
On Tue, Jul 28, 2020 at 02:49:59AM +0100, Matthew Wilcox wrote:
> On Sun, Jul 26, 2020 at 04:18:10PM +0100, Christoph Hellwig wrote:
> > Zone append is a protocol context that ha not business showing up
> > in a file system interface. The right interface is a generic way
> > to report the written
On Mon, Jul 27, 2020 at 09:18:31AM +, Peng Fan wrote:
> > Subject: Re: [PATCH 00/10] remoteproc: imx_rproc: support iMX8M and early
> > boot
> >
> > On Mon, Jul 27, 2020 at 06:44:32AM +, Peng Fan wrote:
> > > Hi Oleksij,
> > >
> > > > Subject: Re: [PATCH 00/10] remoteproc: imx_rproc: suppo
Hi,
On 7/27/20 9:44 PM, Andy Shevchenko wrote:
On Mon, Jul 27, 2020 at 10:04 PM Martin Blumenstingl
wrote:
On Mon, Jul 27, 2020 at 11:23 AM Amelie Delaunay wrote:
> - p->activate_stm_id_vb_detection = true;
> + p->activate_stm_id_vb_detection =
> + !of_property_re
Met vriendelijke groet / kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands
T: +31 (0) 499 33 69 69
E: mike.looijm...@topicproducts.com
W: www.topicproducts.com
Please consider the environment before printing this e-mail
On 2
On Mon, 27 Jul 2020 at 19:48, Greg Kroah-Hartman
wrote:
>
> This is the start of the stable review cycle for the 5.4.54 release.
> There are 138 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Res
selftests can be built from the toplevel kernel makefile (e.g. make
kselftest-all) or directly (make -C tools/testing/selftests all).
The toplevel kernel makefile explicitly disables implicit rules with
"MAKEFLAGS += -rR", which is passed to tools/testing/selftests. Some
selftest makefiles requir
On Mon, 27 Jul 2020 at 19:49, Greg Kroah-Hartman
wrote:
>
> This is the start of the stable review cycle for the 5.7.11 release.
> There are 179 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Res
On Tue, Jul 28, 2020 at 8:37 AM Jisheng Zhang
wrote:
>
> Hi arm-soc,
>
>
> On Fri, 26 Jun 2020 10:06:41 +0200 Krzysztof Kozlowski wrote:
>
> >
> >
> > Fix dtschema validator warnings like:
> > l2-cache-controller@ac: $nodename:0:
> > 'l2-cache-controller@ac' does not match
> >
Hi Greg,
On Mon, 27 Jul 2020 11:24:48 +0200 Greg KH wrote:
>
> On Mon, Jul 27, 2020 at 06:08:31PM +1000, Stephen Rothwell wrote:
> > Hi all,
> >
> > After merging the char-misc tree, today's linux-next build (x86_64
> > allmodconfig) failed like this:
> >
> > In file included from drivers/misc/
On Sat, 25 Jul 2020 12:21:10 +0200
Ingo Molnar wrote:
>
> * Jarkko Sakkinen wrote:
>
> > On Fri, Jul 24, 2020 at 11:17:11AM +0200, Ingo Molnar wrote:
> > >
> > > * Jarkko Sakkinen wrote:
> > >
> > > > --- a/kernel/kprobes.c
> > > > +++ b/kernel/kprobes.c
> > > > @@ -564,7 +564,7 @@ static v
On Tue, Jul 28, 2020 at 7:37 AM Peilin Ye wrote:
>
> xsk_getsockopt() is copying uninitialized stack memory to userspace when
> `extra_stats` is `false`. Fix it.
>
> Fixes: 8aa5a33578e9 ("xsk: Add new statistics")
> Suggested-by: Dan Carpenter
> Signed-off-by: Peilin Ye
Acked-by: Arnd Bergmann
On Tue, Jul 28, 2020 at 03:00:10AM +0530, Ankit wrote:
> From: Ankit Baluni
You need a ' ' before the '<' character.
>
> Fixed a coding style issue.
Be more descriptive of what you are doing, this is vague.
>
> Signed-off-by: Ankit Baluni
Same here with the ' '.
thanks,
greg k-h
On 28.07.20 09:10, Souptick Joarder wrote:
Hi Boris,
On Sun, Jul 12, 2020 at 9:01 AM Souptick Joarder wrote:
This series contains few clean up, minor bug fixes and
Convert get_user_pages() to pin_user_pages().
I'm compile tested this, but unable to run-time test,
so any testing help is much
Friendly ping.
Is this an effective bugfix?
On 2020/7/17 17:21, Keqian Zhu wrote:
> ARM virtual counter supports event stream. It can only trigger an event
> when the trigger bit of CNTVCT_EL0 changes from 0 to 1 (or from 1 to 0),
> so the actual period of event stream is 2 ^ (cntkctl_evnti + 1).
On Tue, 28 Jul 2020 09:33:05 +0200 Arnd Bergmann wrote:
>
>
> On Tue, Jul 28, 2020 at 8:37 AM Jisheng Zhang
> wrote:
> >
> > Hi arm-soc,
> >
> >
> > On Fri, 26 Jun 2020 10:06:41 +0200 Krzysztof Kozlowski wrote:
> >
> > >
> > >
> > > Fix dtschema validator warnings like:
> > > l2-cache-co
Am 2020-07-28 09:19, schrieb Lee Jones:
On Sun, 26 Jul 2020, Michael Walle wrote:
There are I2C devices which contain several different functions but
doesn't require any special access functions. For these kind of
drivers
an I2C regmap should be enough.
Create an I2C driver which creates an
Hello,
just a few minor issues left:
On Sun, Jul 26, 2020 at 01:18:27AM +0200, Michael Walle wrote:
> diff --git a/drivers/pwm/pwm-sl28cpld.c b/drivers/pwm/pwm-sl28cpld.c
> new file mode 100644
> index ..956fa09f3aba
> --- /dev/null
> +++ b/drivers/pwm/pwm-sl28cpld.c
> @@ -0,0 +1,223
On Mon, Jul 27, 2020 at 11:10 PM Suman Anna wrote:
>
> The DT node full name is currently being used in regmap_config
> which in turn is used to create the regmap debugfs directories.
> This name however is not guaranteed to be unique and the regmap
> debugfs registration can fail in the cases whe
When using usb-c connector (but it can also be the case with a micro-b
connector), iddig, avalid, bvalid, vbusvalid input signals may not be
connected to the DWC2 OTG controller.
DWC2 OTG controller features an overriding control of the PHY voltage valid
and ID input signals.
So, missing signals ca
This patch documents the usb-role-switch property in dwc2 bindings, now
that usb-role-switch support is available in dwc2 driver.
Reviewed-by: Martin Blumenstingl
Signed-off-by: Amelie Delaunay
---
Documentation/devicetree/bindings/usb/dwc2.yaml | 4
1 file changed, 4 insertions(+)
diff -
If usb-role-switch is present in the device tree, it means that ID and Vbus
signals are not connected to the OTG controller but to an external
component (GPIOs, Type-C controller). In this configuration, usb role
switch is used to force valid sessions on STM32MP15 SoCs.
Signed-off-by: Amelie Delau
This patch adds support for usb role switch to dwc2, by using overriding
control of the PHY voltage valid and ID input signals.
iddig signal (ID) can be overridden:
- when setting GUSBCFG_FORCEHOSTMODE, iddig input pin is overridden with 1;
- when setting GUSBCFG_FORCEDEVMODE, iddig input pin is o
Reviewed-by: Hugues Fruchet
On 7/28/20 8:37 AM, Alain Volmat wrote:
> In case of an error during the initialization of the sensor,
> the video device is still available since created at the
> probe of the dcmi driver. Moreover the device wouldn't
> be released even when removing the module since
Hi Christian,
On 20-07-27 14:45, Christian Eggers wrote:
> When hw_random device's quality is non-zero, it will automatically fill
> the kernel's entropy pool at boot. For this purpose, one conservative
> quality value is being picked up as the default value.
IMHO your value is not conservative
Reviewed-by: Hugues Fruchet
On 7/28/20 8:37 AM, Alain Volmat wrote:
> This commit add missing vb2_queue_release calls with the
> probe error path and module remove.
> Missing v4l2_async_notifier_unregister is also added within
> the probe error path
>
> Fixes: 37404f91ef8b ("[media] stm32-dcmi:
On Tue, 2020-07-28 at 01:10 +0200, Daniel Lezcano wrote:
> Now the calls to enable/disable a thermal zone are centralized in a
> call to a function, we can add in these the corresponding netlink
> notifications.
>
> Signed-off-by: Daniel Lezcano
Acked-by: Zhang Rui
> ---
> drivers/thermal/ther
> Subject: Re: [PATCH 00/10] remoteproc: imx_rproc: support iMX8M and early
> boot
>
> On Mon, Jul 27, 2020 at 09:18:31AM +, Peng Fan wrote:
> > > Subject: Re: [PATCH 00/10] remoteproc: imx_rproc: support iMX8M and
> > > early boot
> > >
> > > On Mon, Jul 27, 2020 at 06:44:32AM +, Peng Fan
etm4_count keeps track of number of ETMv4 registered and on some systems,
a race is observed on etm4_count variable which can lead to multiple calls
to cpuhp_setup_state_nocalls_cpuslocked(). This function internally calls
cpuhp_store_callbacks() which prevents multiple registrations of callbacks
f
Hello Martin,
On Mon, Jul 27, 2020 at 10:56:31PM +0200, Martin Botka wrote:
> Mo 27. 7. 2020 at 22:10 Uwe Kleine-König
> wrote:
> > On Fri, Jul 24, 2020 at 11:36:51PM +0200, Martin Botka wrote:
> > > +/*
> > > + * pwm_output_type_support()
> > > + * @pwm: PWM device
> > > + *
> > > + * Returns:
On Mon, 2020-07-27 at 10:10 -0700, David Miller wrote:
> From: Julia Lawall
> Date: Sun, 26 Jul 2020 12:58:29 +0200
>
> > list_for_each_entry is able to handle an empty list.
> > The only effect of avoiding the loop is not initializing the
> > index variable.
> > Drop list_empty tests in cases wh
Stephen Boyd writes:
> Quoting Arnd Bergmann (2020-07-27 13:11:49)
>> On Mon, Jul 27, 2020 at 9:39 PM Stephen Boyd wrote:
>> >
>> > Why was the clk driver merged to linux-next outside of the clk tree? Was
>> > there some sort of dependency?
>>
>> I merged the entire series of the base platform
On Tue, Jul 28, 2020 at 05:33:31PM +1000, Stephen Rothwell wrote:
> Hi Greg,
>
> On Mon, 27 Jul 2020 11:24:48 +0200 Greg KH wrote:
> >
> > On Mon, Jul 27, 2020 at 06:08:31PM +1000, Stephen Rothwell wrote:
> > > Hi all,
> > >
> > > After merging the char-misc tree, today's linux-next build (x86_6
On Mon, 2020-07-27 at 13:24 -0700, David Miller wrote:
> From: "Gustavo A. R. Silva"
> Date: Mon, 27 Jul 2020 13:03:56 -0500
>
> > Replace the existing /* fall through */ comments and its variants
> with
> > the new pseudo-keyword macro fallthrough[1]. Also, remove
> unnecessary
> > fall-through
>
> Dumping testbus registers is heavy enough to cause stability issues
> sometime, just remove them as of now.
>
> Signed-off-by: Can Guo
Reviewed-by: Avri Altman
On Tue, Jul 28, 2020 at 07:50:04AM +, Peng Fan wrote:
> > Subject: Re: [PATCH 00/10] remoteproc: imx_rproc: support iMX8M and early
> > boot
> >
> > On Mon, Jul 27, 2020 at 09:18:31AM +, Peng Fan wrote:
> > > > Subject: Re: [PATCH 00/10] remoteproc: imx_rproc: support iMX8M and
> > > > ear
Hi
Am 07.07.20 um 04:58 schrieb Tian Tao:
> fixed the following warning:
> hibmc_drm_drv.c:296:1-18:WARNING: Assignment of 0/1 to bool variable.
> hibmc_drm_drv.c:301:2-19: WARNING: Assignment of 0/1 to bool variable.
>
> v2:
> using the pci_dev.msi_enabled instead of priv->msi_enabled.
>
> Sign
Am 2020-07-28 09:24, schrieb Lee Jones:
On Sun, 26 Jul 2020, Michael Walle wrote:
Add a device tree bindings for the board management controller found
on
the Kontron SMARC-sAL28 board.
Signed-off-by: Michael Walle
Reviewed-by: Rob Herring
---
Changes since v5:
- none
Changes since v4:
-
On Fri, 17 Jul 2020, David E. Box wrote:
> Intel Platform Monitoring Technology (PMT) is an architecture for
> enumerating and accessing hardware monitoring facilities. PMT supports
> multiple types of monitoring capabilities. This driver creates platform
> devices for each type so that they may b
On Mon, Jul 27, 2020 at 12:44 PM Arnd Bergmann wrote:
> On Mon, Jul 27, 2020 at 10:18 AM Anson Huang wrote:
> > > Why is this driver using syscore_ops rather than
> > > SIMPLE_DEV_PM_OPS() or similar?
> >
> > Below is the original patch of using syscore_ops, it has explanation:
> >
> > commit 1a
On Mon, 27 Jul 2020, Suman Anna wrote:
> The DT node full name is currently being used in regmap_config
> which in turn is used to create the regmap debugfs directories.
> This name however is not guaranteed to be unique and the regmap
> debugfs registration can fail in the cases where the syscon
Le 27/07/2020 à 18:09, Joe Perches a écrit :
On Mon, 2020-07-27 at 15:51 +0200, Christophe JAILLET wrote:
Avoid a memset after a call to 'dma_alloc_coherent()'.
This is useless since
commit 518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*")
[]
diff --git a/drivers/media/pci/bt
Le 27/07/2020 à 18:16, Joe Perches a écrit :
On Mon, 2020-07-27 at 09:09 -0700, Joe Perches wrote:
On Mon, 2020-07-27 at 15:51 +0200, Christophe JAILLET wrote:
Avoid a memset after a call to 'dma_alloc_coherent()'.
This is useless since
commit 518a2f1925c3 ("dma-mapping: zero memory returned fr
From: Christoph Hellwig
> Sent: 27 July 2020 17:24
>
> On Mon, Jul 27, 2020 at 06:16:32PM +0200, Jason A. Donenfeld wrote:
> > Maybe sockptr_advance should have some safety checks and sometimes
> > return -EFAULT? Or you should always use the implementation where
> > being a kernel address is an e
On Mon, Jul 27, 2020 at 10:12 PM Mike Rapoport wrote:
>
> From: Mike Rapoport
>
> The function free_highpages() in both arm and xtensa essentially open-code
> for_each_free_mem_range() loop to detect high memory pages that were not
> reserved and that should be initialized and passed to the buddy
On Mon, Jul 27, 2020 at 1:57 PM Arnd Bergmann wrote:
> Overall, my feeling is that making sure all drivers that depend on the pinctrl
> driver can deal with deferred probing is a prerequisite before this can be
> made a loadable module itself (same for clk, irqchip, etc drivers that others
> may
Rob Herring writes:
> On Fri, Jul 24, 2020 at 01:14:02PM +0200, Lars Povlsen wrote:
>> This has the following changes for the snps,dw-apb-ss DT bindings:
>>
>> - Add "microchip,sparx5-spi" as the compatible for the Sparx5 SoC
>> controller
>>
>> - Add the property "rx-sample-delay-ns"
>>
>> Si
Hi all,
After merging the vhost tree, today's linux-next build (x86_64
allmodconfig) failed like this:
In file included from drivers/virtio/virtio_vdpa.c:17:
include/linux/vdpa.h:43:21: error: expected ':', ',', ';', '}' or
'__attribute__' before '.' token
43 | bool features_valid.
|
On Tue, Jul 28, 2020 at 3:45 AM Peilin Ye wrote:
>
> copy_one_buf() is copying uninitialized stack memory to userspace due to
> the compiler not initializing holes in statically allocated structures.
> Fix it by initializing `v` with memset().
I would add 'potentially' somewhere in that descripti
On Tue, 28 Jul 2020, Michael Walle wrote:
> Am 2020-07-28 09:19, schrieb Lee Jones:
> > On Sun, 26 Jul 2020, Michael Walle wrote:
> >
> > > There are I2C devices which contain several different functions but
> > > doesn't require any special access functions. For these kind of
> > > drivers
> > >
Alexander Graf writes:
> MSRs are weird. Some of them are normal control registers, such as EFER.
> Some however are registers that really are model specific, not very
> interesting to virtualization workloads, and not performance critical.
> Others again are really just windows into package conf
On Sun, 26 Jul 2020 19:06:20 +0300
Ard Biesheuvel wrote:
> On Sun, 26 Jul 2020 at 11:14, Mike Rapoport wrote:
> >
> > On Sat, Jul 25, 2020 at 06:16:48AM +0300, Jarkko Sakkinen wrote:
> > > On Fri, Jul 24, 2020 at 11:27:46AM +0200, Ingo Molnar wrote:
> > > >
> > > > * Jarkko Sakkinen wrote:
> >
On Tue, Jul 28, 2020 at 10:07 AM David Laight wrote:
>
> From: Christoph Hellwig
> > Sent: 27 July 2020 17:24
> >
> > On Mon, Jul 27, 2020 at 06:16:32PM +0200, Jason A. Donenfeld wrote:
> > > Maybe sockptr_advance should have some safety checks and sometimes
> > > return -EFAULT? Or you should alw
On Mon, Jul 27, 2020 at 11:50 PM Serge Semin
wrote:
> It turns out my "mostly" was wrong in this matter. It's 4 out of 17 patches,
> which make the initialization in the same order as mine:
I'll think about fixing them up to all look the same at some point
if noone beats me to it. Sorry for the
On Sun, Jul 26, 2020 at 06:54:52PM +0200, Samuel Thibault wrote:
> Thanks to Okash's latest work, the TODO list is essentially empty, so
> the way out from staging now seems open.
>
> The status of the remaining issue mentioned in TODO is not clear, we
> asked the speakup user mailing list for rep
Convert the sy8824x binding to DT schema format using json-schema.
Signed-off-by: Jisheng Zhang
---
.../bindings/regulator/silergy,sy8824x.yaml | 40 +++
.../devicetree/bindings/regulator/sy8824x.txt | 24 ---
2 files changed, 40 insertions(+), 24 deletions(-)
create m
On Tue, Jul 28, 2020 at 7:55 AM Randy Dunlap wrote:
> From: Randy Dunlap
>
> Export mtk_is_virt_gpio() for the case when
> CONFIG_PINCTRL_MTK=y
> CONFIG_PINCTRL_MTK_V2=y
> CONFIG_PINCTRL_MTK_MOORE=y
> CONFIG_PINCTRL_MTK_PARIS=m
>
> to fix this build error:
>
> ERROR: modpost: "mtk_is_virt_gpio"
Hi,
Am 2020-07-28 09:43, schrieb Uwe Kleine-König:
Hello,
just a few minor issues left:
thanks for the review.
On Sun, Jul 26, 2020 at 01:18:27AM +0200, Michael Walle wrote:
diff --git a/drivers/pwm/pwm-sl28cpld.c b/drivers/pwm/pwm-sl28cpld.c
new file mode 100644
index ..956fa
Scott,
Scott Branden writes:
> Bios now updated to latest. Same kernel panic issue. Log below.
>
> I think it is related to power cycling quickly.
> Should APIC work if PC power cycled in a few seconds or is that the
> problem?
Yes, emphasis on should. Just to clarify, if you reboot it works a
Hi Greg,
On Tue, 28 Jul 2020 09:53:36 +0200 Greg KH wrote:
>
> On Tue, Jul 28, 2020 at 05:33:31PM +1000, Stephen Rothwell wrote:
> > Hi Greg,
> >
> > On Mon, 27 Jul 2020 11:24:48 +0200 Greg KH wrote:
> > >
> > > On Mon, Jul 27, 2020 at 06:08:31PM +1000, Stephen Rothwell wrote:
> > > > Hi al
From: Ankit Baluni
Removed braces for a 'if' condition as it contain only single line &
there is no need for braces for such case according to coding style
rules.
Signed-off-by: Ankit Baluni
---
drivers/staging/media/atomisp/pci/atomisp_cmd.c | 3 +--
1 file changed, 1 insertion(+), 2 deleti
* H. Nikolaus Schaller [200727 20:51]:
> Hi Tony,
> after trying v5.8-rc7 the Pyra boot hangs after ca. 3 seconds
> (a little random what the last log line is).
>
> I could bisect it to:
>
> 6cfcd5563b4fadbf49ba8fa481978e5e86d30322 is the first bad commit
> commit 6cfcd5563b4fadbf49ba8fa481978e5
Hi Randy,
> -Original Message-
> From: Randy Dunlap
> Sent: 28 July 2020 08:53
> To: Andrew Morton ; broo...@kernel.org; linux-
> fsde...@vger.kernel.org; linux-kernel@vger.kernel.org; linux...@kvack.org;
> linux-n...@vger.kernel.org; mho...@suse.cz; mm-comm...@vger.kernel.org;
> s...@can
Am 2020-07-28 10:15, schrieb Lee Jones:
On Tue, 28 Jul 2020, Michael Walle wrote:
Am 2020-07-28 09:19, schrieb Lee Jones:
> On Sun, 26 Jul 2020, Michael Walle wrote:
>
> > There are I2C devices which contain several different functions but
> > doesn't require any special access functions. For t
On Tue, 28 Jul 2020, Michael Walle wrote:
> Am 2020-07-28 09:24, schrieb Lee Jones:
> > On Sun, 26 Jul 2020, Michael Walle wrote:
> >
> > > Add a device tree bindings for the board management controller found
> > > on
> > > the Kontron SMARC-sAL28 board.
> > >
> > > Signed-off-by: Michael Walle
Hi, Mika,
On 7/23/20 12:05 PM, Alexander Sverdlin wrote:
>
> Hello Tudor,
>
> On 22/07/2020 19:03, tudor.amba...@microchip.com wrote:
>> On 7/22/20 7:37 PM, Alexander Sverdlin wrote:
>
> [...]
>
>>> I've performed my testing as well and got the following results:
>>>
>>> Vanilla Linux 4.9 (i.e
On 7/28/2020 11:19 AM, Stephen Rothwell wrote:
Hi all,
Today's linux-next merge of the devicetree tree got a conflict in:
Documentation/devicetree/bindings/pci/qcom,pcie.txt
between commits:
736ae5c91712 ("dt-bindings: PCI: qcom: Add missing clks")
b11b8cc161de ("dt-bindings: PCI: qc
Quoting Sai Prakash Ranjan (2020-07-28 00:51:02)
> diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c
> b/drivers/hwtracing/coresight/coresight-etm4x.c
> index 6d7d2169bfb2..adb71987a1e3 100644
> --- a/drivers/hwtracing/coresight/coresight-etm4x.c
> +++ b/drivers/hwtracing/coresight/coresi
AMD SoC general pupose clk is present in new platforms with
same MMIO mappings. We can reuse the same clk handler support
for other platforms. Hence, changing name from ST(SoC) to FCH(IP)
Signed-off-by: Akshu Agrawal
---
v2: pulled in clk changes so that patch compiles individually
drivers/acpi
Quoting peng@nxp.com (2020-07-27 19:54:48)
> From: Peng Fan
>
> Use devm_kzalloc to avoid memory leak when probe fail.
Please add () to functions in commit text.
>
> Signed-off-by: Peng Fan
AMD SoC general pupose clk is present in new platforms with
minor differences. We can reuse the same clk driver for other
platforms. Hence, changing name from ST(SoC) to FCH(IP)
Signed-off-by: Akshu Agrawal
---
v2: Moved some changes to acp:apd patch so that individual patches
compile
drivers/c
Since there is slight difference in AMD RV based soc in misc
clk architecture. The fmw property will help in differentiating
the SoCs.
Signed-off-by: Akshu Agrawal
---
drivers/acpi/acpi_apd.c | 4
include/linux/platform_data/clk-fch.h | 1 +
2 files changed, 5 insertions(+)
d
There is minor difference between previous family of SoC and
the current one. Which is the there is only 48Mh fixed clk.
There is no mux and no option to select another freq as there in previous.
Signed-off-by: Akshu Agrawal
---
v2: Consolidated the loops in remove.
v3: Removed negation in condit
The keys in smaps output are padded to fixed width with spaces.
All except for THPeligible that uses tabs (only since
commit c06306696f83 ("mm: thp: fix false negative of shmem vma's THP
eligibility")).
Unify the output formatting to save time debugging some naïve parsers.
(Part of the unification
On Mon, Jul 27, 2020 at 10:56:03PM +0200, Thomas Gleixner wrote:
> pet...@infradead.org writes:
> > Abuse the SMAP rules to ensure poke_int3_handler() doesn't call out to
> > anything.
>
> Yuck. Isn't that what noinstr is for or am I missing something?
Well, we don't want poke_int3_handler() to c
On Mon, 27 Jul 2020 at 19:40, Greg Kroah-Hartman
wrote:
>
> This is the start of the stable review cycle for the 4.19.135 release.
> There are 86 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Re
On Tue, 28 Jul 2020, Michael Walle wrote:
> Am 2020-07-28 10:15, schrieb Lee Jones:
> > On Tue, 28 Jul 2020, Michael Walle wrote:
> >
> > > Am 2020-07-28 09:19, schrieb Lee Jones:
> > > > On Sun, 26 Jul 2020, Michael Walle wrote:
> > > >
> > > > > There are I2C devices which contain several diffe
* Pavel Machek [200726 08:25]:
> Hi!
>
> > > Here's the updated set of these patches fixed up for Johan's and
> > > Pavel's earlier comments.
> > >
> > > This series does the following:
> > >
> > > 1. Adds functions to n_gsm.c for serdev-ngsm.c driver to use
> > >
> > > 2. Adds a generic serde
Am 2020-07-28 10:27, schrieb Lee Jones:
On Tue, 28 Jul 2020, Michael Walle wrote:
Am 2020-07-28 09:24, schrieb Lee Jones:
> On Sun, 26 Jul 2020, Michael Walle wrote:
>
> > Add a device tree bindings for the board management controller found
> > on
> > the Kontron SMARC-sAL28 board.
> >
> > Sign
On Mon, Jul 27, 2020 at 08:11:28PM +0200, Paul Cercueil wrote:
> The ROUT (right channel output of audio codec) was connected to INL
> (left channel of audio amplifier) instead of INR (right channel of audio
> amplifier).
>
> Fixes: 8ddebad15e9b ("MIPS: qi_lb60: Migrate to devicetree")
> Cc: sta..
On Mon, Jul 27, 2020 at 11:50:14AM -0600, Rob Herring wrote:
> On Fri, Jul 24, 2020 at 7:45 PM Jiaxun Yang wrote:
> >
> > So the parser can be used to parse range property of ISA bus.
> >
> > As they're all using PCI-like method of range property, there is no need
> > start a new parser.
> >
> > S
1 - 100 of 1385 matches
Mail list logo
