Use the defined variable "dev" to make the code cleaner.
Signed-off-by: Zhang Shengju
Signed-off-by: Tang Bin
---
sound/soc/qcom/lpass-apq8016.c | 9
sound/soc/qcom/lpass-cpu.c | 39 --
2 files changed, 22 insertions(+), 26 deletions(-)
diff --git
On Fri 01-05-20 09:39:24, Yafang Shao wrote:
> On Fri, May 1, 2020 at 2:27 AM Shakeel Butt wrote:
> >
> > Lowering memory.max can trigger an oom-kill if the reclaim does not
> > succeed. However if oom-killer does not find a process for killing, it
> > dumps a lot of warnings.
> >
>
> I have been
The TI PCIe-to-PCI bridge prevents the Intel SoC from entering power
state deeper than PC3, consumes lots of unnecessary power.
On Windows ASPM L1 is enabled on the device and its upstream bridge,
so it can make the Intel SoC reach PC8 or PC10 to save lots of power.
So enable ASPM L1 like Windows
syzbot suspects this bug was fixed by commit:
commit 10476e6304222ced7df9b3d5fb0a043b3c2a1ad8
Author: Peter Zijlstra
Date: Fri Mar 13 08:56:38 2020 +
locking/lockdep: Fix bad recursion pattern
bisection log: https://syzkaller.appspot.com/x/bisect.txt?x=142baee410
start commit:
On Mon, 4 May 2020 10:02:35 +0800
"Ramuthevar, Vadivel MuruganX"
wrote:
> Hi Boris,
>
> On 30/4/2020 9:01 pm, Boris Brezillon wrote:
> > On Thu, 30 Apr 2020 14:36:00 +0200
> > Boris Brezillon wrote:
> >
> >> On Thu, 30 Apr 2020 17:07:03 +0800
> >> "Ramuthevar, Vadivel MuruganX"
> >> wrote:
Gentle reminder.
> -Original Message-
> From: Sandipan Patra
> Sent: Monday, April 20, 2020 9:24 PM
> To: Thierry Reding ; robh...@kernel.org; u.kleine-
> koe...@pengutronix.de; Jonathan Hunter
> Cc: Bibek Basu ; Laxman Dewangan
> ; linux-...@vger.kernel.org;
> devicet...@vger.kernel.org
Hi Amit,
On Mon, Mar 30, 2020 at 1:42 PM Amit Daniel Kachhap
wrote:
> This option can be used in Kconfig files to compare the ld version
> and enable/disable incompatible config options if required.
>
> This option is used in the subsequent patch along with GCC_VERSION to
> filter out an incompat
changes v5:
- set MASTER_SLAVE_CFG_UNSUPPORTED as default value
- send a netlink error message on validation error
- more code fixes
changes v4:
- rename port_mode to master_slave
- move validation code to net/ethtool/linkmodes.c
- add UNSUPPORTED state and avoid sending unsupported fields
- mor
The TJA11xx PHYs have a vendor specific Master/Slave configuration bit,
which is not compatible with IEEE 803.2-2018 spec for 100Base-T1
devices. So, provide a custom config_ange call back to solve this
problem.
Signed-off-by: Oleksij Rempel
---
drivers/net/phy/nxp-tja11xx.c | 43 +++
This UAPI is needed for BroadR-Reach 100BASE-T1 devices. Due to lack of
auto-negotiation support, we needed to be able to configure the
MASTER-SLAVE role of the port manually or from an application in user
space.
The same UAPI can be used for 1000BASE-T or MultiGBASE-T devices to
force MASTER or S
On Fri, May 01, 2020 at 10:47:22AM -0500, Jeremy Linton wrote:
> Hi,
>
> Thanks for taking a look at this.
>
> On 5/1/20 2:05 AM, Greg KH wrote:
> > On Thu, Apr 30, 2020 at 04:19:22PM -0500, Jeremy Linton wrote:
> > > On arm64, and possibly other architectures, requesting
> > > IO coherent memory
Hi!
There's something going wrong with the version numbers:
> I'm pleased to announce the 4.4.220-rt196 stable release.
>
> This release is just an update to the new stable 4.4.215 version
> Or to build 4.4.220-rt196 directly, the following patches should be
...
> You can also build from 4.4.2
Gentle reminder.
> -Original Message-
> From: Sandipan Patra
> Sent: Friday, April 17, 2020 7:03 PM
> To: Thierry Reding ; robh...@kernel.org; u.kleine-
> koe...@pengutronix.de; Jonathan Hunter
> Cc: Bibek Basu ; Bitan Biswas ;
> linux-...@vger.kernel.org; devicet...@vger.kernel.org; lin
On Mon, May 04, 2020 at 11:47:56AM +1000, Stephen Rothwell wrote:
> Hi all,
>
> [Just adding cc]
>
> On Mon, 4 May 2020 11:46:25 +1000 Stephen Rothwell
> wrote:
> >
> > Hi all,
> >
> > After merging the char-misc tree, Friday's linux-next build (arm64
> > allmodconfig) failed like this:
> >
>
Gentle reminder.
> -Original Message-
> From: Sandipan Patra
> Sent: Friday, April 17, 2020 7:03 PM
> To: Thierry Reding ; robh...@kernel.org; u.kleine-
> koe...@pengutronix.de; Jonathan Hunter
> Cc: Bibek Basu ; Bitan Biswas ;
> linux-...@vger.kernel.org; devicet...@vger.kernel.org; lin
Hi Wesley,
On 09-04-20, 15:52, Wesley Cheng wrote:
> This series adds support for the Synopsis 7nm HSPHY USB driver being
> used in QCOM chipsets. The HSPHY register map differs compared to
> other PHY revisions. In addition, modifications and updates are done
> to the QMP driver to add new reg
Hi Boris,
Thank you very much for the prompt review and suggestions...
On 4/5/2020 3:08 pm, Boris Brezillon wrote:
On Mon, 4 May 2020 10:02:35 +0800
"Ramuthevar, Vadivel MuruganX"
wrote:
Hi Boris,
On 30/4/2020 9:01 pm, Boris Brezillon wrote:
On Thu, 30 Apr 2020 14:36:00 +0200
Boris Brez
On Mon, 4 May 2020 15:15:08 +0800
"Ramuthevar, Vadivel MuruganX"
wrote:
> Hi Boris,
>
>Thank you very much for the prompt review and suggestions...
>
> On 4/5/2020 3:08 pm, Boris Brezillon wrote:
> > On Mon, 4 May 2020 10:02:35 +0800
> > "Ramuthevar, Vadivel MuruganX"
> > wrote:
> >
>
On Sun, May 3, 2020 at 12:29 PM Siddharth Gupta wrote:
>
> Misuse of CONFIG_* in UAPI headers should result in an error as it exposes
> configuration of different targets to userspace.
Sorry, I missed to point out this.
This statement is not precious; it does not expose the kernel
configuration
On 03/05/2020 14.58, Peter Zijlstra wrote:
> On Sat, May 02, 2020 at 03:08:00PM +0200, Rasmus Villemoes wrote:
>> On 01/05/2020 22.29, Peter Zijlstra wrote:
>>> +#define static_cond_call(name)
>>> \
>>> + if (STATIC_CALL_KEY(name).func)
Below is the list of build error/warning regressions/improvements in
v5.7-rc4[1] compared to v5.6[2].
Summarized:
- build errors: +1/-3
- build warnings: +95/-80
JFYI, when comparing v5.7-rc4[1] to v5.7-rc3[3], the summaries are:
- build errors: +3/-123
- build warnings: +8/-160
Happy fi
On Fri 01-05-20 07:59:57, Yafang Shao wrote:
> On Thu, Apr 30, 2020 at 10:57 PM Michal Hocko wrote:
> >
> > On Wed 29-04-20 12:56:27, Johannes Weiner wrote:
> > [...]
> > > I think to address this, we need a more comprehensive solution and
> > > introduce some form of serialization. I'm not sure y
On 4/05/20 9:39 am, Ben Chuang wrote:
> From: Ben Chuang
>
> Need to clear some bits in a vendor-defined register after reboot from
> Windows 10.
>
> Fixes: e51df6ce668a ("mmc: host: sdhci-pci: Add Genesys Logic GL975x support")
> Reported-by: Grzegorz Kowal
> Signed-off-by: Ben Chuang
Acked-
Use devm_platform_ioremap_resource_byname() instead of
platform_get_resource_byname() + devm_ioremap_resource().
Signed-off-by: Zhang Shengju
Signed-off-by: Tang Bin
---
sound/soc/qcom/lpass-cpu.c | 6 ++
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/sound/soc/qcom/lpass-cpu
On Mon, May 4, 2020 at 3:03 PM Michal Hocko wrote:
>
> On Fri 01-05-20 09:39:24, Yafang Shao wrote:
> > On Fri, May 1, 2020 at 2:27 AM Shakeel Butt wrote:
> > >
> > > Lowering memory.max can trigger an oom-kill if the reclaim does not
> > > succeed. However if oom-killer does not find a process f
On 2/05/20 5:28 pm, Wolfram Sang wrote:
> The 'pengutronix' address is defunct for years. Use the proper contact
> address.
>
> Signed-off-by: Wolfram Sang
Acked-by: Adrian Hunter
> ---
> drivers/mmc/host/sdhci-esdhc.h | 2 +-
> include/linux/platform_data/mmc-esdhc-imx.h | 2 +-
On 30-04-20, 15:15, Dilip Kota wrote:
> +enum {
> + PHY_0,
> + PHY_1,
> + PHY_MAX_NUM
PHY_MAX_NUM = PHY_1?
> +static inline void combo_phy_w32_off_mask(void __iomem *base, unsigned int
> reg,
> + u32 mask, u32 val)
> +{
> + u32 reg_val;
> +
On Mon, May 04, 2020 at 07:05:50AM +, Rajan Vaja wrote:
> Hi Greg,
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing in e-mail?
A: No.
Q: Should I include quotations after my reply?
On Mon, May 4, 2020 at 9:24 AM Geert Uytterhoeven wrote:
> JFYI, when comparing v5.7-rc4[1] to v5.7-rc3[3], the summaries are:
> - build errors: +3/-123
> [1]
> http://kisskb.ellerman.id.au/kisskb/branch/linus/head/0e698dfa282211e414076f9dc7e83c1c288314fd/
> (all 239 configs)
> [3]
> http://
Add a second reset of the I2S block after the audio parameters are set.
Without this, it was observed on the R-Car Gen3 platform that in ~50% of
audio stream starts, the samples on each odd-numbered channel were delayed
by one sample relative to the even-numbered channels: A stereo test stream
was
> But when nfp_nsp_has_hwinfo_lookup fail, the pointer is not released,
Do you distinguish between releasing items and the role of such a pointer?
> which can lead to a memory leak bug.
Would you like to reconsider the usage of the word “can” for
such change descriptions?
Regards,
Markus
On Mon 04-05-20 15:26:52, Yafang Shao wrote:
> On Mon, May 4, 2020 at 3:03 PM Michal Hocko wrote:
> >
> > On Fri 01-05-20 09:39:24, Yafang Shao wrote:
> > > On Fri, May 1, 2020 at 2:27 AM Shakeel Butt wrote:
> > > >
> > > > Lowering memory.max can trigger an oom-kill if the reclaim does not
> > >
Hi all,
Changes since 20200501:
My fixes tree contains:
bbefc924d0ff ("ubsan: disable UBSAN_ALIGNMENT under COMPILE_TEST")
7cb1d38f52b1 ("drm/msm: Fix undefined "rd_full" link error")
The qcom tree still had its build failure for which I reverted a commit.
The keys tree gained a conflict a
It's not necessary to specify 'void const __force *' casting
for 'drvdata->lpaif'.
Signed-off-by: Zhang Shengju
Signed-off-by: Tang Bin
---
sound/soc/qcom/lpass-cpu.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.
On 03-05-20, 22:18, Robert Marko wrote:
> Add a driver to setup the USB PHY-s on Qualcom m IPQ40xx series SoCs.
> The driver sets up HS and SS phys.
Applied, thanks
--
~Vinod
On 03-05-20, 22:18, Robert Marko wrote:
> This patch adds the binding documentation for the HS/SS USB PHY found
> inside Qualcom Dakota SoCs.
Applied, thanks
--
~Vinod
On 03-05-20, 22:18, Robert Marko wrote:
> From: John Crispin
>
> Since we now have driver for the USB PHY, lets add the necessary nodes to
> DTSI.
Reviewed-by: Vinod Koul
Bjorn, I have picked the phy and dt binding, feel free to apply this one
Thanks
--
~Vinod
On Mon, May 4, 2020 at 3:35 PM Michal Hocko wrote:
>
> On Mon 04-05-20 15:26:52, Yafang Shao wrote:
> > On Mon, May 4, 2020 at 3:03 PM Michal Hocko wrote:
> > >
> > > On Fri 01-05-20 09:39:24, Yafang Shao wrote:
> > > > On Fri, May 1, 2020 at 2:27 AM Shakeel Butt wrote:
> > > > >
> > > > > Lower
Hi, Corey:
On 2020/4/19 14:29, Tang Bin wrote:
Hi, Corey:
On 2020/4/18 21:49, Corey Minyard wrote:
On Sat, Apr 18, 2020 at 04:02:29PM +0800, Tang Bin wrote:
If the function platform_get_irq() failed, the negative
value returned will not be detected here. So fix error
handling in bt_bmc_config
30.04.2020 01:00, Sowjanya Komatineni пишет:
> +/*
> + * VI channel input data type enum.
> + * These data type enum value gets programmed into corresponding Tegra VI
> + * channel register bits.
> + */
> +enum tegra_image_dt {
> + TEGRA_IMAGE_DT_YUV420_8 = 24,
> + TEGRA_IMAGE_DT_YUV420_10,
On Mai 04 2020, Anup Patel wrote:
> Slightly improved text:
>
> This issue happens on random booting of multiple harts, which means
> it will manifest for BBL and OpenSBI v0.6 (or older version). In OpenSBI
> v0.7 (or higher version), we have HSM extension so all the secondary harts
> are brought-
On 5/4/2020 12:15 AM, Vinod Koul wrote:
> Hi Wesley,
>
> On 09-04-20, 15:52, Wesley Cheng wrote:
>> This series adds support for the Synopsis 7nm HSPHY USB driver being
>> used in QCOM chipsets. The HSPHY register map differs compared to
>> other PHY revisions. In addition, modifications and
On Mon, 4 May 2020 at 03:57, Hillf Danton wrote:
>
>
> The comment says, if there is an imbalance between LLC domains (IOW we
> could increase the overall cache use), we need some less-loaded LLC
> domain to pull some load.
>
> To show that imbalance, record busy CPUs as they come and go by doing
Hi,
On Sun, May 03, 2020 at 11:51:00AM -0700, Reinette Chatre wrote:
> I am struggling with what should follow ...
Since a diff is better than a thousand words :-) see below.
It builds here with my .config but I'm sure it still needs work but you
get the idea. When you do the final version, plea
On Mon 04-05-20 15:40:18, Yafang Shao wrote:
> On Mon, May 4, 2020 at 3:35 PM Michal Hocko wrote:
> >
> > On Mon 04-05-20 15:26:52, Yafang Shao wrote:
[...]
> > > As explianed above, no eligible task is different from no task.
> > > If there are some candidates but no one is eligible, the system w
Lantiq serial driver/IP is reused for a x86 based SoC as well.
Update the Kconfig accordingly.
Signed-off-by: Rahul Tanwar
---
drivers/tty/serial/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 0aea76cd67ff
Thanks for your review. I'll hopefully send a v2 later today.
As for the sensor count, I don't know how many there actually are. I'm
an independent dev and don't have access to any documentation and I'm
solely basing on what I find in downstream, and I think it's 10,
unless mainline expects the _0
@Michal,
i noticed that linkmodes_fill_reply() some times get not enough
tailroom.
if data->peer_empty == 0
linkmodes_reply_size() size: 476
linkmodes_fill_reply() skb tailroom: 724
if data->peer_empty == 1
linkmodes_reply_size() size: 216
linkmodes_fill_rep
On Mon, May 04, 2020 at 09:11:12AM +0200, Geert Uytterhoeven wrote:
> On Mon, Mar 30, 2020 at 1:42 PM Amit Daniel Kachhap
> wrote:
> > This option can be used in Kconfig files to compare the ld version
> > and enable/disable incompatible config options if required.
> >
> > This option is used in t
Am Sonntag, den 03.05.2020, 09:49 -0500 schrieb Adam Ford:
> On Thu, Apr 30, 2020 at 7:46 AM Schrempf Frieder
> wrote:
> > From: Frieder Schrempf
> >
> > According to the documents, the i.MX8M-Mini features a GC320 and a
> > GCNanoUltra GPU core. Etnaviv detects them as:
> >
> > etnaviv
Merge {CLEAN,MRPROPER,DISTCLEAN}_DIRS into {CLEAN,MRPROPER,DISTCLEAN}_FILES
because the difference is just the -r option passed to the 'rm' command.
Do likewise as commit 1634f2bfdb84 ("kbuild: remove clean-dirs syntax").
Signed-off-by: Masahiro Yamada
---
Makefile | 22 ++-
This comment was added by commit ("kbuild: Restore build nr, improve
vmlinux link") [1].
It was talking about if_changed_rule at that time. Now, it is unclear
what to fix.
[1]:
https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=ea52ca1b3e3882b499cc6c043f384958b88b62ff
Stripe control programming is governed by following formula, which is
referenced from the HD Audio specification(Revision 1.0a).
{ ((num_channels * bits_per_sample) / number of SDOs) >= 8 }
Currently above is implemented in snd_hdac_get_stream_stripe_ctl().
This patch introduces a structure memb
Tegra194 supports 4 SDO lines but GCAP register indicates 2 lines. Thus it
does not reflect the true capability of the HW. This patch presents a
workaround by updating NSDO value accordingly in T_AZA_DBG_CFG_2 register.
Signed-off-by: Sameer Pujar
---
sound/pci/hda/hda_tegra.c | 33 +
This series proposes SW workarounds for Tegra194 HDA HW bugs.
Following are the two issues seen:
1. GCAP register does not reflect true capability.
The actual number of SDO lines is "4", where as it reflects "2".
2. With 4 SDO line configuration playback fails for,
44.1K/48K, 2-channel, 1
Tegra194 has 4 SDO lines and with this configuration playback fails
for 44.1K/48K, 2-channel and 16-bps. It results in below print,
"aplay: pcm_write:2011: write error: Input/output error"
Below relation is used to derive stripe control and is referenced
from HD Audio Specification: Revision 1.0
On Thu, 30 Apr 2020 at 20:28, Arvind Sankar wrote:
>
> This series is on top of efi/next.
>
> Patch 1 fixes the size allocated for x86 boot_params.
> Patch 2 refactors the setting of various hi/lo 32-bit fields, mainly on x86.
> Patch 3 renames pr_efi/pr_efi_err
> Patches 4-6 convert the remaining
Hi Arnd
On Tue, Apr 28, 2020 at 4:41 PM Baolin Wang wrote:
>
> On Tue, Apr 28, 2020 at 4:19 PM Lee Jones wrote:
> >
> > On Tue, 28 Apr 2020, Baolin Wang wrote:
> >
> > > On Tue, Apr 28, 2020 at 3:14 PM Lee Jones wrote:
> > > >
> > > > On Tue, 28 Apr 2020, Baolin Wang wrote:
> > > >
> > > > > On
The following commit has been merged into the ras/core branch of tip:
Commit-ID: 3b4ff4eb904fef04c36b39052ca8eb31fa41fad0
Gitweb:
https://git.kernel.org/tip/3b4ff4eb904fef04c36b39052ca8eb31fa41fad0
Author:He Zhe
AuthorDate:Wed, 04 Mar 2020 14:39:07 +08:00
Committer: Bo
> From: Jonathan Cameron
> Sent: Samstag, 2. Mai 2020 19:19
> To: Sa, Nuno
> Cc: Ardelean, Alexandru ; linux-
> i...@vger.kernel.org; linux-kernel@vger.kernel.org; l...@metafoo.de
> Subject: Re: [RFC PATCH 4/4] iio: Track enabled channels on a per channel
> basis
>
> [External]
>
> On Mon, 27 A
... and correct SPDX-License-Identifier.
Signed-off-by: Oleksij Rempel
---
.../devicetree/bindings/net/nxp,tja11xx.yaml | 51 ---
1 file changed, 32 insertions(+), 19 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
b/Documentation/devicetree/bi
On 5/4/2020 3:29 PM, Vinod Koul wrote:
On 30-04-20, 15:15, Dilip Kota wrote:
+enum {
+ PHY_0,
+ PHY_1,
+ PHY_MAX_NUM
PHY_MAX_NUM = PHY_1?
Driver is using it for no. of PHYs/maximum PHY id.
Code snippets:
struct intel_combo_phy {
...
struct reset_control *phy_r
This patch series cleans up the Altera TSE driver and adds support
for the newer msgdma prefetcher as well as ptp support when using
the msgdma prefetcher.
v2: Rename altera_ptp to intel_fpga_tod, modify msgdma and sgdma tx_buffer
functions to be of type netdev_tx_t, and minor suggested edits
From: Dalon Westergreen
The return from tx_buffer call in tse_start_xmit is
inapropriately ignored. tse_buffer calls should return
0 for success or NETDEV_TX_BUSY. tse_start_xmit should
return not report a successful transmit when the tse_buffer
call returns an error condition.
In addition to
From: Dalon Westergreen
It is more appropriate to set the rx and tx ring size before calling
the init function for the dma.
Signed-off-by: Dalon Westergreen
Signed-off-by: Joyce Ooi
---
v2: no change
---
drivers/net/ethernet/altera/altera_tse_main.c | 6 --
1 file changed, 4 insertions(+)
From: Dalon Westergreen
The declaration of struct altera_dmaops does not have
identifier names. Add identifier names to confrom with
required coding styles.
Signed-off-by: Dalon Westergreen
Signed-off-by: Joyce Ooi
---
v2: no change
---
drivers/net/ethernet/altera/altera_tse.h | 30 +
From: Dalon Westergreen
The sgdma and msgdma header files included function declarations
without identifier names for pointers. Add appropriate identifier
names.
Signed-off-by: Dalon Westergreen
Signed-off-by: Joyce Ooi
---
v2: this patch is added in patch version 2
---
drivers/net/ethernet/
From: Dalon Westergreen
Modify all msgdma and sgdma tx_buffer functions to be of type
netdev_tx_t, and also modify main tx function to be of
netdev_tx_t type.
Signed-off-by: Dalon Westergreen
Signed-off-by: Joyce Ooi
---
v2: this patch is added in patch set version 2
---
drivers/net/ethernet/
On Mon, 04 May 2020 10:16:13 +0200,
Sameer Pujar wrote:
>
> This series proposes SW workarounds for Tegra194 HDA HW bugs.
> Following are the two issues seen:
> 1. GCAP register does not reflect true capability.
> The actual number of SDO lines is "4", where as it reflects "2".
> 2. With 4 S
From: Dalon Westergreen
Move request_and_map and other shared functions to altera_utils. This
is the first step to moving common code out of tse specific code so
that it can be shared with future altera ethernet ip.
Signed-off-by: Dalon Westergreen
Signed-off-by: Joyce Ooi
---
v2: no change
--
From: Dalon Westergreen
Allow for optional start up of tx dma if the start_txdma
function is defined in altera_dmaops.
Signed-off-by: Dalon Westergreen
Signed-off-by: Joyce Ooi
---
v2: no change
---
drivers/net/ethernet/altera/altera_tse.h | 1 +
drivers/net/ethernet/altera/altera_tse_ma
From: Dalon Westergreen
Add support for the ptp clock used with the tse, and update
the driver to support timestamping when enabled. We also
enable debugfs entries for the ptp clock to allow some user
control and interaction with the ptp clock.
Cc: Richard Cochran
Signed-off-by: Dalon Westergr
From: Dalon Westergreen
Add support for the mSGDMA prefetcher. The prefetcher adds support
for a linked list of descriptors in system memory. The prefetcher
feeds these to the mSGDMA dispatcher.
The prefetcher is configured to poll for the next descriptor in the
list to be owned by hardware, t
From: Dalon Westergreen
Update devicetree bindings documentation to include msgdma
prefetcher and ptp bindings.
Cc: Rob Herring
Cc: devicet...@vger.kernel.org
Signed-off-by: Dalon Westergreen
Signed-off-by: Joyce Ooi
---
v2: no change
---
.../devicetree/bindings/net/altera_tse.txt |
the related system resources were not released when pci_iomap() return
error in the rtw_pci_io_mapping() function. add pci_release_regions() to
fix it.
Fixes: e3037485c68ec1a ("rtw88: new Realtek 802.11ac driver")
Cc: Andy Shevchenko
Signed-off-by: Dejin Zheng
---
drivers/net/wireless/realtek/r
On 5/4/2020 1:59 PM, Takashi Iwai wrote:
External email: Use caution opening links or attachments
On Mon, 04 May 2020 10:16:13 +0200,
Sameer Pujar wrote:
This series proposes SW workarounds for Tegra194 HDA HW bugs.
Following are the two issues seen:
1. GCAP register does not reflect true
The current GIT_COMMIT_ID will report error when the commit description
spans across three lines, for examples:
"...
To rehash a previous explanation given in commit 1c44ce560b4d ("net:
mscc: ocelot: fix vlan_filtering when enslaving to bridge before link is
up"), the switch driver operates the in
> Subject: [PATCH net v1] net: rtw88: fix an issue about leak system resources
>
> the related system resources were not released when pci_iomap() return
> error in the rtw_pci_io_mapping() function. add pci_release_regions() to
> fix it.
>
> Fixes: e3037485c68ec1a ("rtw88: new Realtek 802.11ac d
On Mon, May 04, 2020 at 10:04:17AM +0200, Oleksij Rempel wrote:
> @Michal,
>
> i noticed that linkmodes_fill_reply() some times get not enough
> tailroom.
> if data->peer_empty == 0
> linkmodes_reply_size() size: 476
> linkmodes_fill_reply() skb tailroom: 724
>
>
> if data->peer_empty == 1
> lin
Hi Richard,
Ricardo Ribalda Delgado wrote on Thu, 30 Apr 2020
15:17:21 +0200:
> From: Ricardo Ribalda Delgado
>
> When the nvmem framework is enabled, a nvmem device is created per mtd
> device/partition.
>
> It is not uncommon that a device can have multiple mtd devices with
> partitions tha
Hi all,
here is first attempt to rework this binding. So far I have following
questions and/or issues:
- currently this PHY is identified by ID, not by compatible. Should it
be probed by compatible?
Theoretically I can use:
compatible = "nxp,tja1102", "ethernet-phy-ieee802.3-c22";
B
Hi Robin,
On 5/1/2020 9:24 PM, Robin Murphy wrote:
> On 2020-05-01 3:46 pm, Lorenzo Pieralisi wrote:
>> [+Robin - to check on dma-ranges intepretation]
>>
>> I would need RobH and Robin to review this.
>>
>> Also, An ACK from Tom is required - for the whole series.
>>
>> On Fri, Apr 17, 2020 at 05
According to submitting-patches.rst, 'Fixes:' tag has a little
stricter condition about the one line summary than normal git
commit description:
“...
Do not split the tag across multiple lines, tags are exempt from
the "wrap at 75 columns" rule in order to simplify parsing scripts
...”
And there i
Am 30.04.20 um 16:02 schrieb Stefan Haberland:
> Am 30.04.20 um 15:13 schrieb Christoph Hellwig:
>> On Thu, Apr 30, 2020 at 01:17:54PM +0200, Stefan Haberland wrote:
>>> Remove the calls to ioctl_by_bdev from the DASD partition detection code
>>> to enable the removal of the specific code.
>>>
>>>
On Fri, May 1, 2020 at 9:59 AM Masami Hiramatsu wrote:
>
> Hi,
>
> On Wed, 29 Apr 2020 17:50:44 +0800
> Po-Hsu Lin wrote:
>
> > When the required module for the test does not exist, use
> > exit_unsupported instead of exit_unresolved to indicate this test is
> > not supported.
>
> Hmm, this doesn
Paolo / Maxim,
On 5/2/20 11:42 PM, Paolo Bonzini wrote:
On 02/05/20 15:58, Maxim Levitsky wrote:
The AVIC is disabled by svm_toggle_avic_for_irq_window, which calls
kvm_request_apicv_update, which broadcasts the KVM_REQ_APICV_UPDATE vcpu
request,
however it doesn't broadcast it to CPU on which
On Tue, Apr 28, 2020 at 05:16:20PM +0200, Joerg Roedel wrote:
> Subject: Re: [PATCH v3 10/75] x86/insn: Add insn_rep_prefix() helper
s/insn_rep_prefix/insn_has_rep_prefix/
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
On 5/4/2020 2:05 PM, Sameer Pujar wrote:
On 5/4/2020 1:59 PM, Takashi Iwai wrote:
External email: Use caution opening links or attachments
On Mon, 04 May 2020 10:16:13 +0200,
Sameer Pujar wrote:
This series proposes SW workarounds for Tegra194 HDA HW bugs.
Following are the two issues se
On Fri, May 01, 2020 at 11:40:16AM -0700, John Stultz wrote:
> On Fri, May 1, 2020 at 3:42 AM Brian Starkey wrote:
> >
> > Hi,
> >
> > On Fri, May 01, 2020 at 07:39:46AM +, John Stultz wrote:
> > > This patch adds a linux,cma-heap property for CMA reserved memory
> > > regions, which will be u
Hi Boris,
On 4/5/2020 3:17 pm, Boris Brezillon wrote:
On Mon, 4 May 2020 15:15:08 +0800
"Ramuthevar, Vadivel MuruganX"
wrote:
Hi Boris,
Thank you very much for the prompt review and suggestions...
On 4/5/2020 3:08 pm, Boris Brezillon wrote:
On Mon, 4 May 2020 10:02:35 +0800
"Ramuthevar
Hi Lorenzo,
On 5/1/2020 8:41 PM, Lorenzo Pieralisi wrote:
> On Fri, Apr 17, 2020 at 05:13:22PM +0530, Kishon Vijay Abraham I wrote:
>> The PCI Bus Binding specification (IEEE Std 1275-1994 Revision 2.1 [1])
>> defines both Vendor ID and Device ID to be 32-bits. Fix
>> pcie-cadence-host.c driver to
Hi all,
In commit
c76d6569de67 ("dmaengine: owl: Use correct lock in owl_dma_get_pchan()")
Fixes tag
Fixes: 47e20577c24d ("dmaengine: Add Actions Semi Owl family S900 DMA
has these problem(s):
- Subject has leading but no trailing parentheses
- Subject has leading but no trailing quot
On Mon, May 04, 2020 at 10:37:34AM +0200, Michal Kubecek wrote:
> On Mon, May 04, 2020 at 10:04:17AM +0200, Oleksij Rempel wrote:
> > @Michal,
> >
> > i noticed that linkmodes_fill_reply() some times get not enough
> > tailroom.
> > if data->peer_empty == 0
> > linkmodes_reply_size() size: 476
> >
On 04-05-20, 18:53, Stephen Rothwell wrote:
> Hi all,
>
> In commit
>
> c76d6569de67 ("dmaengine: owl: Use correct lock in owl_dma_get_pchan()")
>
> Fixes tag
>
> Fixes: 47e20577c24d ("dmaengine: Add Actions Semi Owl family S900 DMA
>
> has these problem(s):
>
> - Subject has leading bu
Hi Georgi,
On 4/28/2020 2:46 PM, Georgi Djakov wrote:
There is a repeated pattern in multiple drivers where they want to switch
the bandwidth between zero and some other value. This is happening often
in the suspend/resume callbacks. Let's add helper functions to enable and
disable the path, so
Hi all,
Commit
f080d93e1d41 ("sched/debug: Fix trival print_task() format")
is missing a Signed-off-by from its author.
Also, there should be a blank line before the commit message tags
(it actually looks like the end of the commit message got truncated -
probably by leading dahses on a line)
On Mon, 4 May 2020 16:50:08 +0800
"Ramuthevar, Vadivel MuruganX"
wrote:
> Hi Boris,
>
> On 4/5/2020 3:17 pm, Boris Brezillon wrote:
> > On Mon, 4 May 2020 15:15:08 +0800
> > "Ramuthevar, Vadivel MuruganX"
> > wrote:
> >
> >> Hi Boris,
> >>
> >> Thank you very much for the prompt review a
Hi Stefan, thanks for the review!
On Sat, 2020-05-02 at 11:05 +0200, Stefan Wahren wrote:
> > + /* Make sure we don't trigger a firmware load unnecesarely *
> s/unnecesarely/unnecessarily/
Noted
> > + pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET, &version);
> pci_read_config_d
On 02.05.20 04:38, Qian Cai wrote:
> This line,
>
> if (WARN_ON_ONCE(fc != 0x03))
>
> qemu-kvm-2.12.0-99.module+el8.2.0+5827+8c39933c with this kernel config,
>
> https://raw.githubusercontent.com/cailca/linux-mm/master/s390.config
>
> # /usr/libexec/qemu-kvm -name ubuntu-18.04-server-cloudi
>On 28-04-2020 16:25, Thierry Reding wrote:
On Wed, Apr 15, 2020 at 01:55:06PM +0530, Nagarjuna Kristam wrote:
Perform charger-detect operation if corresponding dt property is enabled.
Update usb-phy with the detected charger state and max current values.
Register charger-detect API's of usb-p
1 - 100 of 1599 matches
Mail list logo
