Himanshu,
> Use dma_zalloc_coherent instead of dma_alloc_coherent followed by
> memset 0.
Does not apply to 4.16/scsi-queue. Please resubmit. Thanks!
--
Martin K. Petersen Oracle Linux Engineering
In some case, the node blocks has wrong blkaddr whose segment type is
NODE, e.g., recover inode has missing xattr flag and the blkaddr is in
the xattr range. Since fsck.f2fs does not check the recovery nodes, this
will cause __f2fs_replace_block change the curseg of node and do the
update_sit_entry
On Wed, 3 Jan 2018, Dan Williams wrote:
> [ adding Julia and Dan ]
>
> On Wed, Jan 3, 2018 at 5:07 PM, Alan Cox wrote:
> > On Wed, 3 Jan 2018 16:39:31 -0800
> > Linus Torvalds wrote:
> >
> >> On Wed, Jan 3, 2018 at 4:15 PM, Dan Williams
> >> wrote:
> >> > The 'if_nospec' primitive marks loca
On 2018/1/4 14:16, Jaegeuk Kim wrote:
> On 01/04, Chao Yu wrote:
>> On 2018/1/4 4:12, Jaegeuk Kim wrote:
>>> On 01/03, Chao Yu wrote:
If we need an array with variable size in the end of structure, we
can utilize flexible array feature which is supported in C99, so
let's change sit_n
On Wed, Jan 3, 2018 at 9:01 PM, Eric W. Biederman wrote:
> "Williams, Dan J" writes:
>
>
>
>> Note that these are "a human looked at static analysis reports and
>> could not rationalize that these are false positives". Specific domain
>> knowledge about these paths may find that some of them are
On Wed, Jan 3, 2018 at 9:55 PM, Al Viro wrote:
> On Thu, Jan 04, 2018 at 05:50:12AM +, Al Viro wrote:
>> On Wed, Jan 03, 2018 at 09:44:33PM -0800, Dan Williams wrote:
>> > On Wed, Jan 3, 2018 at 8:44 PM, Al Viro wrote:
>> > > On Thu, Jan 04, 2018 at 03:10:51AM +, Williams, Dan J wrote:
>>
On 04/01/18 03:00, Andi Kleen wrote:
> From: Andi Kleen
>
> Convert all indirect jumps in xen inline assembler code to use
> non speculative sequences.
>
> Based on code from David Woodhouse and Tim Chen
>
> Signed-off-by: Andi Kleen
> ---
> arch/x86/crypto/camellia-aesni-avx2-asm_64.S | 1 +
Hi Jeremy
> -Original Message-
> From: linux-arm-kernel
[mailto:linux-arm-kernel-boun...@lists.infradead.org]
> On Behalf Of Jeremy Linton
> Sent: Wednesday, January 3, 2018 10:28 PM
> To: vkil...@codeaurora.org
> Cc: 'Mark Rutland' ; jonathan.zh...@cavium.com;
> jayachandran.n...@cavium.c
Let's show precise # of blocks that user/root can use through bavail and bfree
respectively.
Signed-off-by: Jaegeuk Kim
---
Change log from v1:
- clean up obsolete values
fs/f2fs/super.c | 7 +++
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/fs/f2fs/super.c b/fs/f2fs/super
On Wed, Jan 03, 2018 at 09:17:26PM -0800, Florian Fainelli wrote:
> On 12/11/2017 09:59 AM, Catalin Marinas wrote:
> > On Wed, Dec 06, 2017 at 12:35:19PM +, Will Deacon wrote:
> >> Patches are also pushed here:
> >>
> >> git://git.kernel.org/pub/scm/linux/kernel/git/will/linux.git kpti
> >>
>
> > diff --git a/arch/x86/crypto/camellia-aesni-avx2-asm_64.S
> > b/arch/x86/crypto/camellia-aesni-avx2-asm_64.S
> > index 1743e6850e00..9cd8450a2050 100644
> > --- a/arch/x86/crypto/camellia-aesni-avx2-asm_64.S
> > +++ b/arch/x86/crypto/camellia-aesni-avx2-asm_64.S
> > @@ -12,6 +12,7 @@
> >
> >
ers-tests - pass: 12,
Hikey board test results,
Summary
kernel: 4.4.110-rc1
git repo: https://git.linaro.org/lkft/arm64-stable-rc.git
git tag: 4.4.110-rc1-hikey-20180103-95
git commit: 0769c4b4aafd63e5d73b6d67f6fe93abcff67cdc
git describe
This patch allows root to reserve some blocks via mount option.
"-o reserve_root=N" means N x 4KB-sized blocks for root only.
Signed-off-by: Jaegeuk Kim
---
Change log from v1:
- handle remount case to limit reserve_root=%u
fs/f2fs/f2fs.h | 20
fs/f2fs/super.c | 34
On Wed, 2018-01-03 at 21:13 -0800, Eric Dumazet wrote:
> Note: all commands must start from beginning of the line in the email body.
>
> I guess skb_probe_transport_header() should be hardened to reject malicious
> packets given by user space, instead of being gentle.
Although bug triggered for t
On 01/04, Yunlong Song wrote:
> In some case, the node blocks has wrong blkaddr whose segment type is
> NODE, e.g., recover inode has missing xattr flag and the blkaddr is in
> the xattr range. Since fsck.f2fs does not check the recovery nodes, this
> will cause __f2fs_replace_block change the curs
* Laura Abbott wrote:
> Hi,
>
> Fedora got a report via IRC of a double fault with KPTI
> https://paste.fedoraproject.org/paste/SL~of04ZExXP6AN2gcJi7A
I believe this one should be fixed by:
d7732ba55c4b: x86/pti: Switch to kernel CR3 at early in entry_SYSCALL_compat()
> This is on -rc6 . I
On 4 January 2018 at 01:41, Greg Kroah-Hartman
wrote:
> This is the start of the stable review cycle for the 4.9.75 release.
> There are 39 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Response
This implements the debugfs interface for thermal cooling devices and
exposes some pretty useful statistics. These statistics have proven to
be quite useful specially while doing benchmarks related to the task
scheduler, where we want to make sure that nothing has disrupted the
test, specially the
In some case, the node blocks has wrong blkaddr whose segment type is
NODE, e.g., recover inode has missing xattr flag and the blkaddr is in
the xattr range. Since fsck.f2fs does not check the recovery nodes, this
will cause __f2fs_replace_block change the curseg of node and do the
update_sit_entry
On Thu, Jan 04, 2018 at 12:16:08AM +, Ben Hutchings wrote:
> No such exception has been added upstream, so I don't think it's
> appropriate to add it in stable.
On its way:
https://git.kernel.org/tip/694d99d40972f12e59a3696effee8a376b79d7c8
--
Regards/Gruss,
Boris.
SUSE Linux GmbH, GF:
From: Chunyan Zhang
Some clocks on SC9860 are in the same address area with syscon devices,
those are what have a property of 'sprd,syscon' which would refer to
syscon devices, others would have a reg property indicated their address
ranges.
Signed-off-by: Chunyan Zhang
---
arch/arm64/boot/dts
From: Chunyan Zhang
Some clocks on SC9860 are in the same address area with syscon
devices, the proper syscon node will be quoted under the
definitions of those clocks in DT.
Signed-off-by: Chunyan Zhang
---
arch/arm64/boot/dts/sprd/whale2.dtsi | 46 +++-
1 file
On 01/04, Yunlong Song wrote:
> In some case, the node blocks has wrong blkaddr whose segment type is
> NODE, e.g., recover inode has missing xattr flag and the blkaddr is in
> the xattr range. Since fsck.f2fs does not check the recovery nodes, this
> will cause __f2fs_replace_block change the curs
* Thomas Gleixner wrote:
> On Wed, 3 Jan 2018, Benjamin Gilbert wrote:
>
> > On Wed, Jan 03, 2018 at 10:20:16AM +0100, Greg Kroah-Hartman wrote:
> > > Ick, not good, any chance you can test 4.15-rc6 to verify that the issue
> > > is also there (or not)?
> >
> > I haven't been able to reproduce
On Thu, Jan 04, 2018 at 08:14:21AM +0100, Ingo Molnar wrote:
> - (or it's something I missed to consider)
It was a operator error, the issue is also on 4.15-rc6, see another
email in this thread :)
* Greg Kroah-Hartman wrote:
> On Thu, Jan 04, 2018 at 08:14:21AM +0100, Ingo Molnar wrote:
> > - (or it's something I missed to consider)
>
> It was a operator error, the issue is also on 4.15-rc6, see another
> email in this thread :)
ah, ok :-)
Nevertheless it made sense to go through all
On 2018/1/4 14:50, Jaegeuk Kim wrote:
> Let's show precise # of blocks that user/root can use through bavail and bfree
> respectively.
>
> Signed-off-by: Jaegeuk Kim
Reviewed-by: Chao Yu
Thanks,
Some regulator consumers would like to make the regulator device
keeping a voltage range output when the system entering into
suspend states.
Making regulator voltage be an array can allow consumers to set voltage
for normal state as well as for suspend states through the same code.
Signed-off-by
Some systems need to set regulators to specific states when they enter
low power modes, especially around CPUs. There are many of these modes
depending on the particular runtime state.
Currently the regulator consumers are not granted permission to change
suspend state of regulator devices, the co
Some systems need to set regulators to specific states when they enter low
power modes, especially around CPUs.
Currently the regulator driver, for suspend and resume features, provides
two functions which are exported for being called directly by any modules
or subsystems when they thought the re
Regualtor suspend/resume functions should only be called by PM suspend
core via registering dev_pm_ops, and regulator devices should implement
the callback functions. Thus, any regulator consumer shouldn't call
the regulator suspend/resume functions directly.
In order to avoid compile errors, two
In this patch, consumers are allowed to set suspend voltage, and this
actually just set the "uV" in constraint::regulator_state, when the
regulator_suspend_late() was called by PM core through callback when
the system is entering into suspend, the regulator device would act
suspend activity then.
On 1/3/2018 8:07 PM, Logan Gunthorpe wrote:
> Clean up the extra ifdefs which defined the wr_reg64 and rd_reg64
> functions in non-64bit cases in favour of the new common
> io-64-nonatomic-lo-hi header.
>
> Signed-off-by: Logan Gunthorpe
> Cc: Andy Shevchenko
> Cc: Horia Geantă
> Cc: Dan Dougla
The items "disabled" and "enabled" are a little redundant, since only one
of them would be set to record if the regulator device should keep on
or be switched to off in suspend states.
So in this patch, the "disabled" was removed, only leave the "enabled":
- enabled == 1 for regulator-on-in-susp
* Ingo Molnar wrote:
> These will cherry-pick cleanly, so it would be nice to test them on top of of
> the
> -stable kernel that fails:
>
> for N in 450cbdd0125c 4d2dc2cc766c 1e0f25dbf246 be62a3204406 0c3292ca8025
> 9d0b62328d34; do git cherry-pick $N; done
>
> if this brute-force approac
On 2018/1/4 15:10, Jaegeuk Kim wrote:
> On 01/04, Yunlong Song wrote:
>> In some case, the node blocks has wrong blkaddr whose segment type is
>> NODE, e.g., recover inode has missing xattr flag and the blkaddr is in
>> the xattr range. Since fsck.f2fs does not check the recovery nodes, this
>> wil
On 2018年01月02日 17:19, Willem de Bruijn wrote:
More importantly, should this program just return a boolean pass or
drop. Taking a length and trimming may introduce bugs later on if the
stack parses the packet unconditionally, expecting a minimum size
to be present.
This was the reason for intro
According to the i.MX7D Reference Manual,
SNVS block has a clock gate, accessing SNVS block
would need this clock gate to be enabled, add it
into clock tree so that SNVS module driver can
operate this clock gate.
Signed-off-by: Anson Huang
---
drivers/clk/imx/clk-imx7d.c | 1 +
inclu
Add i.MX7 SNVS RTC clock.
Signed-off-by: Anson Huang
---
arch/arm/boot/dts/imx7s.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index e718fd2..f9b97f3 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.d
On Wed 03-01-18 16:05:23, Andrew Morton wrote:
> On Wed, 3 Jan 2018 10:32:07 +0100 Michal Hocko wrote:
>
> > I've posted this as an RFC [1] and both Mike and Naoya seem to be OK
> > both with patches and the approach. I have rebased this on top of [2]
> > because there is a small conflict in mm/
On Thu, Jan 4, 2018 at 2:20 AM, Peter Zijlstra wrote:
> On Wed, Jan 03, 2018 at 11:29:50PM +0300, Konstantin Khlebnikov wrote:
>> For fixing cpu_hotplug_lock recursion in tg_set_cfs_bandwidth().
>
> Why would that need module exports?
Just for symmetry with other functions.
On 2018/1/4 14:51, Jaegeuk Kim wrote:
> This patch allows root to reserve some blocks via mount option.
>
> "-o reserve_root=N" means N x 4KB-sized blocks for root only.
>
> Signed-off-by: Jaegeuk Kim
Reviewed-by: Chao Yu
Thanks,
Hello Martin,
On Thu, Jan 04, 2018 at 01:17:52AM -0500, Martin K. Petersen wrote:
>
> Himanshu,
>
> > Use dma_zalloc_coherent instead of dma_alloc_coherent followed by
> > memset 0.
>
> Does not apply to 4.16/scsi-queue. Please resubmit. Thanks!
No problem, I will resend the patch.
scsi: qla4
On Thu, Jan 04, 2018 at 08:05:50AM +0100, Borislav Petkov wrote:
> On Thu, Jan 04, 2018 at 12:16:08AM +, Ben Hutchings wrote:
> > No such exception has been added upstream, so I don't think it's
> > appropriate to add it in stable.
>
> On its way:
>
> https://git.kernel.org/tip/694d99d40972f1
On Thu, Jan 04, 2018 at 01:24:55AM +, Ben Hutchings wrote:
> On Wed, 2018-01-03 at 21:11 +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.9.75 release.
> > There are 39 patches in this series, all will be posted as a response
> > to this one. If anyon
On Thu, Jan 04, 2018 at 08:39:41AM +0100, Greg Kroah-Hartman wrote:
> On Thu, Jan 04, 2018 at 01:24:55AM +, Ben Hutchings wrote:
> > On Wed, 2018-01-03 at 21:11 +0100, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 4.9.75 release.
> > > There are 39 patches
Hi,
The reason for this series is that MediaTek audio hardware block expose more
than
a single functionality, but register those in different kernel subsystems.
Same issue could also be found in MMSYS: https://lkml.org/lkml/2017/11/14/669
Hence use "simple-mfd" to handle this kind of situation,
As the new MFD parent is in place, modify MT2701 AFE driver to adapt it.
Signed-off-by: Ryder Lee
---
sound/soc/mediatek/mt2701/mt2701-afe-pcm.c | 45 +-
sound/soc/mediatek/mt2701/mt2701-reg.h | 1 -
2 files changed, 20 insertions(+), 26 deletions(-)
diff --git
Add clock driver support for MT2701 audsys.
Signed-off-by: Ryder Lee
---
drivers/clk/mediatek/Kconfig | 6 ++
drivers/clk/mediatek/Makefile | 1 +
drivers/clk/mediatek/clk-mt2701-aud.c | 174 ++
3 files changed, 181 insertions(+)
create mode
Add three core clocks for MT2701 AFE.
Signed-off-by: Ryder Lee
---
sound/soc/mediatek/mt2701/mt2701-afe-clock-ctrl.c | 30 ++-
sound/soc/mediatek/mt2701/mt2701-afe-common.h | 3 +++
2 files changed, 32 insertions(+), 1 deletion(-)
diff --git a/sound/soc/mediatek/mt2701/
Add "simple-mfd" to support MFD device and add a compatible string for MT2701.
Signed-off-by: Ryder Lee
---
.../bindings/arm/mediatek/mediatek,audsys.txt | 21 +++--
1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/mediate
On 2018/1/4 14:13, 夷则(Caspar) wrote:
This patch is trying to help to solve a real issue. Sometimes we need to
evict the whole file from page cache because we are sure it will not be
used in the near future. We try to use posix_fadvise() to finish our
work but we often see a "small tail" at
Add missing clock data 'CLK_AUDIO_AFE_CONN' for MT7622 audsys.
Signed-off-by: Ryder Lee
---
drivers/clk/mediatek/clk-mt7622-aud.c | 3 ++-
include/dt-bindings/clock/mt7622-clk.h | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/mediatek/clk-mt7622-aud.c
b/driv
As the new MFD parent is in place, modify MT2701 AFE documentation to
adapt it. Also add three core clocks in example.
Signed-off-by: Ryder Lee
---
.../devicetree/bindings/sound/mt2701-afe-pcm.txt | 171 +++--
1 file changed, 93 insertions(+), 78 deletions(-)
diff --git a/Docu
2018-01-04 3:14 GMT+08:00 Rob Herring :
> On Tue, Jan 2, 2018 at 2:24 AM, Greentime Hu wrote:
>> From: Greentime Hu
>>
>> This patch adds support for device tree.
>>
>> Signed-off-by: Vincent Chen
>> Signed-off-by: Greentime Hu
>> ---
>> arch/nds32/boot/dts/Makefile |8 +
>> arch/nds3
Select CONFIG_CPUFREQ_DT by default to enable
cpu-freq driver for i.MX7D.
The rest changes are generated by "make savedefconfig".
Signed-off-by: Anson Huang
---
arch/arm/configs/imx_v6_v7_defconfig | 17 ++---
1 file changed, 6 insertions(+), 11 deletions(-)
diff --git a/arch/arm/c
901 - 956 of 956 matches
Mail list logo
