'btrfs_iget()' can not return NULL, so this test can be removed.
Signed-off-by: Christophe JAILLET
---
V1 --> v2: fix the patch description
---
fs/btrfs/free-space-cache.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index e4b48f3
The spec can be found in Intel Software Developer Manual or in
Instruction Set Extensions Programming Reference.
Signed-off-by: Luwei Kang
Signed-off-by: He Chen
---
Changes in v3:
* add a helper in scattered.c to get scattered leaf.
Changes in v2:
* add new macros for new AVX512 scattered feat
On Thu 2016-11-03 22:00:56, Matt Ranostay wrote:
> On Wed, Nov 2, 2016 at 1:22 AM, Pavel Machek wrote:
> > Hi!
> >
> >> >> >> Better then previous one.
> >> >> >>
> >> >> >> But my version of bq27xxx_battery.c already contains this:
> >> >> >
> >> >> > This is for allowing udev rule to set the pro
On 2016-11-04 06:11, Jon Mason wrote:
Add support for the variant of amac hardware present in the Broadcom
Northstar2 based SoCs. Northstar2 requires an additional register to
be
configured with the port speed/duplexity (NICPM). This can be added to
the link callback to hide it from the insta
On 2016-11-04 06:11, Jon Mason wrote:
Change the bgmac driver to allow for phy's defined by the device tree
Signed-off-by: Jon Mason
[Resending from Roundcube due to "Wrong MIME labeling on 8-bit character
texts."
vger.kernel.org reject when using Thunderbird]
Checked for possible regressi
From: Vadim Pasternak
Device driver for Mellanox I2C controller logic, implemented in Lattice
CPLD device.
Device supports:
- Master mode
- One physical bus
- Polling mode
The Kconfig currently controlling compilation of this code is:
drivers/i2c/busses/Kconfig:config I2C_MLXCPLD
Signed-off-
On Wed, Nov 02, 2016 at 04:26:17AM -0600, Jarkko Sakkinen wrote:
> On Wed, Oct 26, 2016 at 04:28:44PM -0600, Jason Gunthorpe wrote:
> > The tis driver does a tpm_get_timeouts out side of tpm_chip_register,
> > and tpm_get_timeouts can print a message, resulting in two prints, eg:
> >
> > tpm tpm0
On Wed, Nov 02, 2016 at 04:33:03AM -0600, Jarkko Sakkinen wrote:
> On Wed, Oct 26, 2016 at 04:28:46PM -0600, Jason Gunthorpe wrote:
> > This is no longer necessary, all calls to tpm_chip_unregister happen
> > in remove() callbacks.
> >
> > Signed-off-by: Jason Gunthorpe
>
> Reviewed-by: Jarkko S
On Thu, Nov 3, 2016 at 11:17 PM, Andrew Morton
wrote:
> On Thu, 3 Nov 2016 22:24:07 +0100 Vitaly Wool wrote:
>
>> On Thu, Nov 3, 2016 at 10:14 PM, Andrew Morton
>> wrote:
>> > On Thu, 3 Nov 2016 22:00:58 +0100 Vitaly Wool wrote:
>> >
>> >> This patch converts pages_nr per-pool counter to atomic
Nayna,
I've already sent these earlier this month as we had this discussion.
Please look up your emails. I can apply these if they look good for
you. Please review them.
/Jarkko
On Sun, Oct 09, 2016 at 01:14:14PM +0300, Jarkko Sakkinen wrote:
> We need to generalize tpm2_get_tpm_pt to tpm2_get_
Hi Andy,
Am Donnerstag, 3. November 2016, 20:38:33 CET schrieb Andy Yan:
> From: Shawn Lin
>
> Add the clock tree definition and driver for rk1108 SoC.
>
> Signed-off-by: Shawn Lin
> Signed-off-by: Andy Yan
> ---
>
> drivers/clk/rockchip/Makefile | 1 +
> drivers/clk/rockchip/clk
Am Donnerstag, 3. November 2016, 20:42:21 CET schrieb Andy Yan:
> RK1108 UARTs are Synopsis DesignWare 8250 compatible.
> Only with different register addresses.
>
> Signed-off-by: Andy Yan
> ---
>
> arch/arm/Kconfig.debug | 30 ++
> 1 file changed, 30 insertions(+)
This series is based on v4.9-rc1, add clock and reset controller support
for Mediatek MT2701.
changes since v14:
- Correct commit messages of dts.
- Refine style of init/probe functions.
- Get reg addresses from platform_get_resouce() and devm_ioremap_resource().
- Minor coding style changes.
cha
From: Shunli Wang
In infrasys and perifsys, there are many reset
control bits for kinds of modules. These bits are
used as actual reset controllers to be registered
into kernel's generic reset controller framework.
Signed-off-by: Shunli Wang
Signed-off-by: James Liao
Signed-off-by: Erin Lo
Te
From: James Liao
Add clock controller nodes for MT2701, include topckgen, infracfg,
pericfg and apmixedsys. This patch also add two oscillators that
provide clocks for MT2701.
Signed-off-by: James Liao
Signed-off-by: Erin Lo
---
arch/arm/boot/dts/mt2701.dtsi | 42 +
We used to use a fixed rate clock for the UARTs. Now that we have clock
support we can associate the correct clocks to the UARTs and drop the
26MHz fixed rate UART clock.
Signed-off-by: Erin Lo
---
arch/arm/boot/dts/mt2701.dtsi | 18 --
1 file changed, 8 insertions(+), 10 deletio
From: Shunli Wang
Add MT2701 clock support, include topckgen, apmixedsys,
infracfg, pericfg and subsystem clocks.
Signed-off-by: Shunli Wang
Signed-off-by: James Liao
Signed-off-by: Erin Lo
Tested-by: John Crispin
---
drivers/clk/mediatek/Kconfig | 43 ++
drivers/clk/mediatek/Ma
Hi!
> > > I have to admit I mostly use an N9.
> >
> > Well, if you compare that to development on PC, I prefer PC.
> >
> > Even arm development boards are usually easier, as they don't need too
> > complex userspace, and do have working serial ports.
> >
> > But I do have a serial adapter for N
On Fri, Nov 04, 2016 at 07:13:52AM +0100, Christophe JAILLET wrote:
> If 'sun4i_layers_init()' returns an error, propagate it instead of
> returning -EINVAL unconditionally.
>
> Signed-off-by: Christophe JAILLET
Applied, thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel
On Fri, Nov 04, 2016 at 12:53:56AM +0100, Stéphan Rafin wrote:
> commit cfa636886033 ("clk: sunxi: factors: Consolidate get_factors
> parameters into a struct") introduced a regression for m factor
> computation in sun4i_get_apb1_factors function.
>
> The old code reassigned the "parent_rate" para
Initially the claim about no need for lock in brightness_show()
was valid as the function was just returning unchanged
LED brightness. After the addition of led_update_brightness() this
is no longer true, as the function can change the brightness if
a LED class driver implements brightness_get op.
When requesting the DMA channel it was mandatory that we do not have DMA
resource nor valid DMA channel via DT. In this case the
dma_request_slave_channel_compat() would fall back and request any channel
with SW trigger.
The same can be achieved with the dma_request_chan_by_mask() without the
misl
Hi Heiko:
On 2016年11月04日 15:36, Heiko Stuebner wrote:
Am Donnerstag, 3. November 2016, 20:42:21 CET schrieb Andy Yan:
RK1108 UARTs are Synopsis DesignWare 8250 compatible.
Only with different register addresses.
Signed-off-by: Andy Yan
---
arch/arm/Kconfig.debug | 30 +
Am Donnerstag, 3. November 2016, 20:40:48 CET schrieb Andy Yan:
> RK1108 is embedded with an ARM Cortex-A7 single core and a DSP core.
> It is designed for varies application scenario such as car DVR, sports
> DV, secure camera and UAV camera.
>
> This patch add basic support for it with DMAC / UA
This patch fixes the following checkpatch.pl error:
ERROR: Macros with complex values should be enclosed in parentheses
Signed-off-by: Maninder Singh
---
drivers/staging/media/st-cec/stih-cec.c |4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/st-ce
Am Freitag, 4. November 2016, 15:58:35 CET schrieb Andy Yan:
> Hi Heiko:
>
> On 2016年11月04日 15:36, Heiko Stuebner wrote:
> > Am Donnerstag, 3. November 2016, 20:42:21 CET schrieb Andy Yan:
> >> RK1108 UARTs are Synopsis DesignWare 8250 compatible.
> >> Only with different register addresses.
> >>
Hi Laurent,
On 11/03/2016 05:12 PM, Laurent Pinchart wrote:
>> It is a bit misleading that it used dma_request_slave_channel_compat()
>> for getting the channel.
>>
>> I think what would be correct is:
>> dma_cap_mask_t mask;
>>
>> dma_cap_zero(mask);
>> dma_cap_set(DMA_SLAVE, mask);
>> hist->dma_
On Nov 03 2016, Paul Burton wrote:
> If a device tree specified a preferred device for kernel console output
> via the stdout-path or linux,stdout-path chosen node properties there's
> no guarantee that it will have specified a device for which we have a
> driver. It may also be the case that we
On 03/11/16 22:05, SF Markus Elfring wrote:
@@ -1091,7 +1091,7 @@ static int vpfe_enum_input(struct file *file, void *priv,
return -EINVAL;
}
sdinfo = &vpfe_dev->cfg->sub_devs[subdev];
-memcpy(inp, &sdinfo->inputs[index], sizeof(struct v4l2_input));
+memcpy(inp, &sdinfo
On 03/11/16 21:54, SF Markus Elfring wrote:
From: Markus Elfring
Date: Wed, 12 Oct 2016 09:56:56 +0200
* A function was called over the pointer "setup_if_config" in the data
structure "venc_platform_data". But the return value was not used so far.
Thus assign it to the local variable "ret"
Am Donnerstag, 3. November 2016, 20:40:48 CET schrieb Andy Yan:
> RK1108 is embedded with an ARM Cortex-A7 single core and a DSP core.
> It is designed for varies application scenario such as car DVR, sports
> DV, secure camera and UAV camera.
>
> This patch add basic support for it with DMAC / UA
On 03/11/16 20:56, SF Markus Elfring wrote:
From: Markus Elfring
Date: Mon, 24 Oct 2016 22:44:02 +0200
Move the assignment for the data structure members "isoc_copy"
and "num_bufs" behind the source code for memory allocations
by this function.
I don't see the point,
Another explanation try
On Thu, Nov 3, 2016 at 4:45 PM, Maxime Ripard
wrote:
> On Thu, Nov 03, 2016 at 03:55:55PM +0800, Chen-Yu Tsai wrote:
>> The Hummingbird A31 has headset and line in audio jacks and an onboard
>> mic routed to the pins for the SoC's internal codec. The line out pins
>> are routed to an onboard speak
Hi Dmitry,
On Thu, Oct 13, 2016 at 5:50 PM, Benjamin Tissoires
wrote:
> Hi guys,
>
> This is the third submission of this series, with some addition of RMI4
> patches
> currently waiting on the list.
>
> I integrated Bjorn's patch because in the end, it seems to be the right thing
> to do. We ca
On 2016/11/4 2:02, Jaegeuk Kim wrote:
> On Fri, Nov 04, 2016 at 12:26:56AM +0800, Chao Yu wrote:
>> From: Chao Yu
>>
>> i_times of inode will be set with current system time which can be
>> configured through 'date', so it's not safe to judge dnode block as
>> garbage data depend on i_times.
>
>
On Thu, Nov 03, 2016 at 06:46:25PM +, Catalin Marinas wrote:
> On Thu, Nov 03, 2016 at 12:12:38PM +0100, Artem Savkov wrote:
> > On Thu, Nov 03, 2016 at 10:39:43AM +, Suzuki K Poulose wrote:
> > > On 02/11/16 23:28, Will Deacon wrote:
> > > > On Wed, Nov 02, 2016 at 05:44:27PM +0100, Artem
Hi Vadim,
On 11/03/2016 08:17 PM, Vadim Pasternak wrote:
Verify that vendor is Mellanox as the first step of initialization.
If it is not - return ENODEV.
Change module license from "GPL v2" to "Dual BSD/GPL".
Signed-off-by: Vadim Pasternak
---
drivers/leds/leds-mlxcpld.c | 5 -
1 file ch
Hi!
I'm debugging overheats on v4.9-rc1... which did not seem to happen in
v4.8-rc1. I'm running basically "nice make -j 3" on kernel... cpus are
fully loaded.
%Cpu(s): 7.5 us, 18.5 sy, 72.6 ni, 0.0 id, 0.0 wa, 0.0 hi, 1.5
si, 0.0 st
KiB Mem: 3087096 total, 2993076 used,94020 free,
Since commit d1e1f4e42b5d ("mtd: nand: add support for reading ONFI
parameters from NAND device"), the returned "type" is never used in
nand_scan_ident().
Make nand_get_flash_type() simply return an integer value in order
to avoid unnecessary ERR_PTR/PTR_ERR dance.
Signed-off-by: Masahiro Yamada
Hi Vladimir,
Thank you very much for your reviews.
> -Original Message-
> From: Vladimir Zapolskiy [mailto:v...@mleia.com]
> Sent: Friday, November 04, 2016 12:34 AM
> To: Vadim Pasternak ; w...@the-dreams.de
> Cc: linux-...@vger.kernel.org; linux-kernel@vger.kernel.org; j...@resnulli.us;
From: Gabriel Fernandez
This patch adds lsi / lse oscillators. These clocks can be use by
RTC clocks.
The clock drivers needs to disable the power domain write protection using
syscon / regmap to enable these clocks.
Signed-off-by: Gabriel Fernandez
---
arch/arm/boot/dts/stm32f429.dtsi | 18 ++
From: Gabriel Fernandez
This patch adds the QSPI clock for stm32f469 discovery board.
Signed-off-by: Gabriel Fernandez
---
arch/arm/boot/dts/stm32f469-disco.dts | 4
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts
b/arch/arm/boot/dts/stm32f469-disco.dt
From: Gabriel Fernandez
This patch-set enables RTC & QSPI clocks.
Gabriel Fernandez (2):
ARM: dts: stm32f429: add LSI and LSE clocks
ARM: dts: stm32f429: Add QSPI clock
arch/arm/boot/dts/stm32f429.dtsi | 18 ++
arch/arm/boot/dts/stm32f469-disco.dts | 4
2 files c
On Fri 2016-11-04 09:38:49, Pavel Machek wrote:
> Hi!
>
> I'm debugging overheats on v4.9-rc1... which did not seem to happen in
> v4.8-rc1. I'm running basically "nice make -j 3" on kernel... cpus are
> fully loaded.
>
> %Cpu(s): 7.5 us, 18.5 sy, 72.6 ni, 0.0 id, 0.0 wa, 0.0 hi, 1.5
> si,
Thanks,
Acked-by: Benjamin Gaignard
2016-11-04 8:58 GMT+01:00 Maninder Singh :
> This patch fixes the following checkpatch.pl error:
> ERROR: Macros with complex values should be enclosed in parentheses
>
> Signed-off-by: Maninder Singh
> ---
> drivers/staging/media/st-cec/stih-cec.c |4 ++
Hi,
>
>A better design would be to check if the associated GDSC is in hw
>control mode and then skip the checks because the clocks are no
>longer under the control of the registers. I presume we only
>enable the clocks here to turn on parent clocks which don't turn
>on/off automatically, i.e. the P
Hi Pavel,
I am really confused about where the problem is. 4.8 or 4.9 ? :)
On 04-11-16, 09:58, Pavel Machek wrote:
> On Fri 2016-11-04 09:38:49, Pavel Machek wrote:
> > Hi!
> >
> > I'm debugging overheats on v4.9-rc1... which did not seem to happen in
> > v4.8-rc1. I'm running basically "nice ma
Hi Wendy,
Replies inline
On 03/11/16 23:40, Wendy Liang wrote:
HI Matt,
Thanks for your patch. I am trying it.
Please see my questions inline.
Thanks,
Wendy
On Wed, Oct 19, 2016 at 5:05 AM, Matt Redfearn wrote:
This patch adds a sysfs interface to rproc allowing the firmware name
and pro
On 11/03/2016 10:53 PM, Sudeep Holla wrote:
>
> Short response to this patch: NAK
>
> To be constructive, since this system lacks PSCI system suspend, it just
> can't support. Alternatively, this can be normal cpuidle state and you
> can use suspend to idle to achieve the same and you need not ha
Hi!
> I am really confused about where the problem is. 4.8 or 4.9 ? :)
Well, v4.8 runs at too low frequency without explanation, and v4.9
overheats. Both are a problem :-). But it starts to look like v4.9 is
the one where the real problem is.
> On 04-11-16, 09:58, Pavel Machek wrote:
> > On Fri
This series improves the startup of SMP processors for MIPS. Firstly,
replace the use of a bitmask of CPUs to detect secondard CPUs starting
with a completion event. This change means that secondary CPUs can fail
to start, and this will be detected and handled rather than hanging the
kernel.
The s
The previous commit made cpu_callin_map redundant, since it is no longer
used to signal secondary CPUs starting, or going offline. Remove it now.
Signed-off-by: Matt Redfearn
---
arch/mips/cavium-octeon/smp.c | 1 -
arch/mips/include/asm/smp.h | 2 --
arch/mips/kernel/smp-bmip
If there is no online CPU within a core which could receive the IPI to
start another VP in that core, a BUG() is triggered. Instead print a
warning and gracefully handle the failure such that the system remains
usable, albeit without the requested secondary CPU.
Signed-off-by: Matt Redfearn
---
On Thu, Nov 3, 2016 at 5:50 PM, Miklos Szeredi wrote:
> On Fri, Oct 28, 2016 at 6:15 PM, Al Viro wrote:
>> On Tue, Oct 25, 2016 at 09:34:47AM +0200, Miklos Szeredi wrote:
...
>>
>> I'm not sure if vfs_path_lookup() is the right tool here. It might be
>> usable for making such a tool, but as it i
If a secondary CPU failed to start, for any reason, the CPU requesting
the secondary to start would get stuck in the loop waiting for the
secondary to be present in the cpu_callin_map.
Rather than that, use a completion event to signal that the secondary
CPU has started and is waiting to synchroni
On Fri, Nov 04, 2016 at 03:23:32AM +0100, Vivien Didelot wrote:
> Most of the chips will have a port register control bits to force the
> port's link up, down, or let normal link detection occurs.
>
> Implement such operation to use it later when setting duplex, etc.
>
> Signed-off-by: Vivien Did
Hi Linus,
Please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs.git overlayfs-linus
Fix two more POSIX ACL bugs introduced in 4.8 and add a missing fsync during
copy up to prevent possible data loss.
Also introduce the concept of feature flags to allow backward incompat
On 04-11-16, 10:26, Pavel Machek wrote:
> How would I know if it is thermal capping? There's nothing in dmesg.
I am not sure what code is responsible for doing that in case of x86, maybe
Rafael and Rui can explain it that better.
But surely it involves userspace in this case as scaling_max_freq i
On Fri, Nov 04, 2016 at 03:23:25AM +0100, Vivien Didelot wrote:
> The Marvell chips have one internal SMI device per port, containing a
> set of registers used to configure a port's link, STP state, default
> VLAN or addresses database, etc.
Reviewed-by: Andrew Lunn
Andrew
On 03/11/2016 21:16, Radim Krčmář wrote:
> > + if (!pi_test_on(&vmx->pi_desc))
>
> We don't call vmx_hwapic_irr_update() when returning early.
This might be a good start, but it's on purpose: IRR is not changing and
the invariant _should_ be that RVI=highest-bit(IRR):
- IRR cleared by process
On 27-10-16, 18:41, Patrick Bellasi wrote:
> +This last requirement is especially important if we consider that schedutil
> can
> +potentially replace all currently available CPUFreq policies. Since schedutil
> +is event based, as opposed to the sampling driven governors, it is already
> more
> +
On 27 October 2016 at 17:27, Ard Biesheuvel wrote:
> This series is a followup to the single patch 'modversions: treat symbol
> CRCs as 32 bit quantities on 64 bit archs', of which two versions have
> been sent out so far [0][1]
>
> As pointed out by Michael, GNU ld behaves a bit differently betwe
Sometimes cdc_mbim failed to probe if runtime pm is enabled:
[9.305626] cdc_mbim: probe of 2-2:1.12 failed with error -22
This can be solved by increase its pm usage counter.
Signed-off-by: Kai-Heng Feng
---
drivers/net/usb/usbnet.c | 7 ++-
1 file changed, 6 insertions(+), 1 deletion(-
On 04/11/2016 06:48, Michael Ellerman wrote:
> Currently the kconfig logic for VFIO_IOMMU_SPAPR_TCE and VFIO_SPAPR_EEH
> is broken when SPAPR_TCE_IOMMU=n. Leading to:
>
> warning: (VFIO) selects VFIO_IOMMU_SPAPR_TCE which has unmet direct
> dependencies (VFIO && SPAPR_TCE_IOMMU)
> warni
Am Donnerstag, 3. November 2016, 20:43:59 CET schrieb Andy Yan:
> RK1108EVB is designed by Rockchip for CVR field.
> This patch add basic support for it, which can boot with
> initramfs into shell.
>
> Signed-off-by: Andy Yan
looks good, the only thing I can also change myself is moving the boar
On 10/18/2016 02:43 AM, Shuah Khan wrote:
> Include buffer size in s5p_mfc_alloc_priv_buf() the error message when it
> fails to allocate the buffer. Remove the debug message that does the same.
>
> Signed-off-by: Shuah Khan
> ---
> drivers/media/platform/s5p-mfc/s5p_mfc_opr.c | 5 ++---
> 1 fil
Gabriel,
On 11/04/2016 09:52 AM, gabriel.fernan...@st.com wrote:
From: Gabriel Fernandez
This patch adds lsi / lse oscillators. These clocks can be use by
RTC clocks.
The clock drivers needs to disable the power domain write protection using
syscon / regmap to enable these clocks.
Is it the
Hello Matt,
On Mon, Oct 31, 2016 at 09:03:57PM -0700, Matt Ranostay wrote:
> On Mon, Oct 31, 2016 at 10:04 AM, Eva Rachel Retuya
> wrote:
> > The name passed to devm_regulator_get() should match the name of the
> > supply as specified in the device datasheet. This makes it clear what
> > power s
Hi Alexandre,
On 11/04/2016 11:15 AM, Alexandre Torgue wrote:
Gabriel,
On 11/04/2016 09:52 AM, gabriel.fernan...@st.com wrote:
From: Gabriel Fernandez
This patch adds lsi / lse oscillators. These clocks can be use by
RTC clocks.
The clock drivers needs to disable the power domain write prot
On 11/04/2016 03:41 AM, Krzysztof Kozlowski wrote:
> On Thu, Nov 03, 2016 at 03:21:32PM +0900, Jaehoon Chung wrote:
>> In drivers/mmc/core/host.c, there is "max-frequency" property.
>> It should be same behavior. So Use the "max-frequency" instead of
>> "clock-freq-min-max".
>>
>> Signed-off-by: Ja
My perl v5.24.0 complains when running the get_maintainer.pl script as
follows:
Unrecognized character \xA0; marked by <-- HERE after <-- HERE near column 1 at
./scripts/get_maintainer.pl line 277.
It is weird to have ascii non-breaking spaces in a script, so do:
s/\xa0/ /g
Signed-off-by: Jiri S
My perl v5.24.0 complains when running the get_maintainer.pl script as
follows:
Unrecognized character \xA0; marked by <-- HERE after <-- HERE near column 1 at
./scripts/get_maintainer.pl line 277.
It is weird to have ascii non-breaking spaces in a script, so do:
s/\xa0/ /g
Signed-off-by: Jiri S
On 11/04/2016, 11:27 AM, Jiri Slaby wrote:
> My perl v5.24.0 complains when running the get_maintainer.pl script as
> follows:
> Unrecognized character \xA0; marked by <-- HERE after <-- HERE near column 1
> at ./scripts/get_maintainer.pl line 277.
>
> It is weird to have ascii non-breaking space
The nand_scan_ident() returns an appropriate error value when it
fails. Use it instead of the fixed error code -ENXIO.
(This driver is already doing so for nand_scan_tail().)
Signed-off-by: Masahiro Yamada
---
drivers/mtd/nand/cafe_nand.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions
The nand_scan_ident() returns an appropriate error value when it
fails. Use it instead of the fixed error code -ENODEV.
(This driver is already doing so for nand_scan_tail().)
Signed-off-by: Masahiro Yamada
---
drivers/mtd/nand/pxa3xx_nand.c | 5 +++--
1 file changed, 3 insertions(+), 2 deleti
The nand_scan_ident/tail() never returns a positive value when it
fails.
Signed-off-by: Masahiro Yamada
---
drivers/mtd/nand/nandsim.c | 4
1 file changed, 4 deletions(-)
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 1eb9344..c76287a 100644
--- a/drivers/mtd/n
The nand_scan_ident/tail() returns an appropriate error value when
it fails. Use it instead of the fixed error code -ENXIO.
Signed-off-by: Masahiro Yamada
---
drivers/mtd/nand/lpc32xx_mlc.c | 10 --
drivers/mtd/nand/lpc32xx_slc.c | 9 +++--
2 files changed, 7 insertions(+), 12 del
The nand_scan() returns an appropriate error value when it fails.
Use it instead of the fixed error code -ENXIO.
Signed-off-by: Masahiro Yamada
---
drivers/mtd/nand/mpc5121_nfc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd
The nand_scan_ident/tail() returns an appropriate error value when
it fails. Use it instead of the fixed error code -ENODEV.
Signed-off-by: Masahiro Yamada
---
drivers/mtd/nand/mtk_nand.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/mtk_nand.c b/driv
The nand_scan_ident/tail() returns an appropriate error value when
it fails. Use it instead of the fixed error code -ENXIO.
Signed-off-by: Masahiro Yamada
---
drivers/mtd/nand/brcmnand/brcmnand.c | 10 ++
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/nand/br
The nand_scan_ident() returns an appropriate error value when it
fails. Use it instead of the fixed error code -ENODEV.
(This driver is already doing so for nand_scan_tail().)
Signed-off-by: Masahiro Yamada
---
drivers/mtd/nand/hisi504_nand.c | 4 +---
1 file changed, 1 insertion(+), 3 deletio
nand_scan(), nand_scan_ident(), nand_scan_tail() return
an appropriate negative value on error.
Most of drivers return the value from them on error,
but some of them return the fixed error code -ENXIO
(and a few return -ENODEV).
This series make those drivers return more precise error code.
Ma
For this driver, there is nothing between nand_scan_ident() and
nand_scan_tail(). They can be merged into nand_scan().
Also, nand_scan() returns an appropriate error value when it fails.
Use it instead of the fixed error code -ENXIO.
Signed-off-by: Masahiro Yamada
---
drivers/mtd/nand/socrate
The nand_scan_ident/tail() returns an appropriate error value when
it fails. Use it instead of the fixed error code -ENXIO.
Signed-off-by: Masahiro Yamada
---
drivers/mtd/nand/vf610_nfc.c | 10 --
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/mtd/nand/vf610_nfc.
The nand_scan() returns an appropriate error value when it fails.
Use it instead of the fixed error code -ENXIO.
Signed-off-by: Masahiro Yamada
---
drivers/mtd/nand/cs553x_nand.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mt
The nand_scan() returns an appropriate error value when it fails.
Use it instead of the fixed error code -ENODEV.
Signed-off-by: Masahiro Yamada
---
drivers/mtd/nand/tmio_nand.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/
The nand_scan() returns an appropriate error value when it fails.
Use it instead of the fixed error code -ENXIO.
Signed-off-by: Masahiro Yamada
---
drivers/mtd/nand/cmx270_nand.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd
The nand_scan() returns an appropriate error value when it fails.
Use it instead of the fixed error code -ENXIO.
Signed-off-by: Masahiro Yamada
---
drivers/mtd/nand/gpio.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c
The nand_scan() returns an appropriate error value when it fails.
Use it instead of the fixed error code -ENXIO.
Signed-off-by: Masahiro Yamada
---
drivers/mtd/nand/pasemi_nand.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mt
The nand_scan_ident/tail() returns an appropriate error value when
it fails. Use it instead of the fixed error code -ENXIO.
Signed-off-by: Masahiro Yamada
---
drivers/mtd/nand/atmel_nand.c | 10 --
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/mtd/nand/atmel_nan
The nand_scan() returns an appropriate error value when it fails.
Use it instead of the fixed error code -ENXIO.
Signed-off-by: Masahiro Yamada
---
drivers/mtd/nand/ams-delta.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/na
The nand_scan_ident/tail() returns an appropriate error value when
it fails. Use it instead of the fixed error code -ENXIO.
Signed-off-by: Masahiro Yamada
---
drivers/mtd/nand/omap2.c | 9 -
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/nand/omap2.c b/driver
The nand_scan_ident/tail() returns an appropriate error value when
it fails. Use it instead of the fixed error code -ENXIO.
Signed-off-by: Masahiro Yamada
---
drivers/mtd/nand/mxc_nand.c | 10 --
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/mtd/nand/mxc_nand.c
The nand_scan() returns an appropriate error value when it fails.
Use it instead of the fixed error code -ENXIO.
Signed-off-by: Masahiro Yamada
---
drivers/mtd/nand/orion_nand.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/
The nand_scan() returns an appropriate error value when it fails.
Use it instead of the fixed error code -ENXIO.
Signed-off-by: Masahiro Yamada
---
drivers/mtd/nand/plat_nand.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/na
The nand_scan_ident/tail() returns an appropriate error value when
it fails. Use it instead of the fixed error code -ENXIO.
Signed-off-by: Masahiro Yamada
---
drivers/mtd/nand/fsmc_nand.c | 9 -
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/nand/fsmc_nand.c
Documentation/CodingStyle recommends to use label names which say
what the goto does or why the goto exists.
Signed-off-by: Masahiro Yamada
---
drivers/i2c/busses/i2c-uniphier-f.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-uniphier-f.c
b/dr
Documentation/CodingStyle recommends to use label names which say
what the goto does or why the goto exists.
Signed-off-by: Masahiro Yamada
---
drivers/i2c/busses/i2c-uniphier.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-uniphier.c
b/driver
Hi Stephen,
Krzysztof has left Samsung, but we would like to continue this task, because
the ABBA dead-locks related to global prepare lock becomes more and more
problematic for us to workaround.
On 2016-09-09 02:24, Stephen Boyd wrote:
On 08/16, Krzysztof Kozlowski wrote:
RFC, please, do not
Hi Heiko:
On 2016年11月04日 18:03, Heiko Stuebner wrote:
Am Donnerstag, 3. November 2016, 20:43:59 CET schrieb Andy Yan:
RK1108EVB is designed by Rockchip for CVR field.
This patch add basic support for it, which can boot with
initramfs into shell.
Signed-off-by: Andy Yan
looks good, the only
1 - 100 of 486 matches
Mail list logo
