On 11/2/2015 10:57 AM, Rob Herring wrote:
On Mon, Nov 2, 2015 at 12:07 AM, Sinan Kaya wrote:
The Qualcomm Technologies HIDMA device has been designed
to support virtualization technology. The driver has been
divided into two to follow the hardware design. The management
driver is executed in
> Is this really what you intended? The else is commented out so if init_udelay
> is quirked
> to be 0 it will always be reset to UDELAY_10MS_DEFAULT. Also init_udelay is
> unsigned, so
> would UINT_MAX be a better choice?
Hi Shane,
Thanks for pointing out this flaw.
Seems it will make 4.3 10ms
On 11/02/2015 08:55 PM, Robin Gong wrote:
On Mon, Nov 02, 2015 at 08:19:12PM -0800, Guenter Roeck wrote:
On 11/02/2015 07:29 PM, Robin Gong wrote:
Enable set_pretimeout interface and trigger the pretimeout interrupt before
watchdog timeout event happen.
Signed-off-by: Robin Gong
---
drivers
On 11/2/2015 3:55 PM, Arnd Bergmann wrote:
Are you using message signaled interrupts then?
Typically MSI guarantees
ordering against DMA, but level or edge triggered interrupts by definition
cannot (at least on PCI, but most other buses are the same way), because
the DMA master has no insight i
On Mon, Nov 2, 2015 at 8:48 PM, Dave Chinner wrote:
> On Mon, Nov 02, 2015 at 07:27:26PM -0800, Dan Williams wrote:
>> On Mon, Nov 2, 2015 at 4:51 PM, Dave Chinner wrote:
>> > On Sun, Nov 01, 2015 at 11:29:53PM -0500, Dan Williams wrote:
>> > The zeroing (and the data, for that matter) doesn't ne
On Mon, Nov 02, 2015 at 08:56:24PM -0800, Dan Williams wrote:
> On Mon, Nov 2, 2015 at 5:16 PM, Dave Chinner wrote:
> > On Sun, Nov 01, 2015 at 11:30:58PM -0500, Dan Williams wrote:
> >> DAX-enabled block device drivers can use hints from fs/dax.c to
> >> optimize their internal tracking of potent
we need to configure the YCC_SWAP bits in ISI_CFG2 according to current
sensor output and Atmel ISI output format.
Current there are two cases Atmel ISI supported:
1. Atmel ISI outputs YUYV format.
This case we need to setup YCC_SWAP according to sensor output
format.
2. Atmel ISI ou
Not like codec path, preview path can do downsampling, so we should setup
a extra preview width, height for it.
This patch add preview resolution setup without down sampling. So currently
preview path will output same size as sensor output size.
Signed-off-by: Josh Wu
---
Changes in v2: None
Hi Nicolas,
[auto build test WARNING on asm-generic/master -- if it's inappropriate base,
please suggest rules for selecting the more suitable base]
url:
https://github.com/0day-ci/linux/commits/Nicolas-Pitre/div64-h-optimize-do_div-for-power-of-two-constant-divisors/20151103-065348
config:
The preview path only can convert UYVY format to RGB data.
To make preview path work correctly, we need to set up YCC_SWAP
according to sensor output and convert them to UYVY.
Signed-off-by: Josh Wu
---
Changes in v2:
- remove cfg2_yuv_swap for rgb format
- correct the comment style
drivers/m
This patch enable Atmel ISI preview path to convert the YUV to RGB format.
Signed-off-by: Josh Wu
---
Changes in v2:
- According to Guennadi's suggestion, remove the is_output_rgb() function
which only used once. Also move the code into the for loop.
drivers/media/platform/soc_camera/atmel-i
Atmel ISI support a preview path which can output RGB data.
So this patch introduces a bool variable to choose which path is
enabled currently. And also we need setup corresponding path registers.
By default the preview path is disabled. We only use Codec path.
Signed-off-by: Josh Wu
---
Chang
On Mon, Nov 02, 2015 at 03:04:29PM -0800, John Stultz wrote:
> On Mon, Nov 2, 2015 at 2:58 PM, Mark Brown wrote:
> > No, the internal get voltage call shouldn't be locking in the first
> > place (and indeed it doesn't do so AFAICT?).
> } else if (rdev->supply) {
> ret = r
This series will enable preview path support in atmel-isi. Which can
make atmel-isi convert the YUV format (from sensor) to RGB565 format.
Changes in v2:
- remove the duplicated variable: cfg2_yuv_swap.
- correct the comment style
- According to Guennadi's suggestion, remove the is_output_rgb() fu
On Mon, Nov 02, 2015 at 09:51:46AM -0600, Suravee Suthikulanit wrote:
> Hi Dennis / Hanjun,
>
> On 11/2/2015 5:58 AM, Hanjun Guo wrote:
> >Hi Dennis,
> >
> >On 11/02/2015 12:02 PM, Dennis Chen wrote:
> >>On Thu, Oct 29, 2015 at 6:50 AM, Suravee Suthikulpanit
> >> wrote:
> >>>From: Jeremy Linton
>
Add DT bindings documentation for the rk3288 crypto drivers.
Signed-off-by: Zain Wang
---
.../devicetree/bindings/crypto/rockchip-crypto.txt | 29 ++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
diff --git
set an id for crypto clk, so that it can be called in other part.
Signed-off-by: Zain Wang
---
drivers/clk/rockchip/clk-rk3288.c | 2 +-
include/dt-bindings/clock/rk3288-cru.h | 1 +
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/rockchip/clk-rk3288.c
b/drivers/c
On Mon, Nov 02, 2015 at 09:31:11PM -0800, Dan Williams wrote:
> On Mon, Nov 2, 2015 at 8:48 PM, Dave Chinner wrote:
> > On Mon, Nov 02, 2015 at 07:27:26PM -0800, Dan Williams wrote:
> >> On Mon, Nov 2, 2015 at 4:51 PM, Dave Chinner wrote:
> >> > On Sun, Nov 01, 2015 at 11:29:53PM -0500, Dan Willi
This commit support three cipher(AES/DES/DES3) and two chainmode(ecb/cbc),
and the more algorithms and new hash drivers will be added later on.
Zain Wang (4):
Crypto: Crypto driver support aes/des/des3 for rk3288
clk: rockchip: set an id for crypto clk
ARM: dts: rockchip: Add Crypto drivers
Crypto driver support cbc/ecb two chainmode, and aes/des/des3 three cipher
mode.
The names registered are:
ecb(aes) cbc(aes) ecb(des) cbc(des) ecb(des3_ede) cbc(des3_ede)
You can alloc tags above in your case.
And other algorithms and platforms will be added later on.
Signed-off-by: Zain Wang
Add Crypto drivers for rk3288 including crypto controller and dma clk.
Signed-off-by: Zain Wang
---
arch/arm/boot/dts/rk3288.dtsi | 15 +++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 6a79c9c..7b7914e 100644
--- a
The enum definition assigns an 'id' to each register in "struct pt_regs"
of arch/powerpc.The order of these values in the enum definition are
based on the corresponding macros in
arch/powerpc/include/uapi/asm/ptrace.h .
Signed-off-by: Anju T
---
arch/powerpc/include/uapi/asm/perf_regs.h | 54 +++
Enable set_pretimeout interface and trigger the pretimeout interrupt before
watchdog timeout event happen.
Signed-off-by: Robin Gong
---
drivers/watchdog/imx2_wdt.c | 58 -
1 file changed, 57 insertions(+), 1 deletion(-)
diff --git a/drivers/watchdog/
The perf infrastructure uses a bit mask to find out
valid registers to display. Define a register mask
for supported registers defined in asm/perf_regs.h.
The bit positions also correspond to register IDs
which is used by perf infrastructure to fetch the register
values.CONFIG_HAVE_PERF_REGS enable
Since the watchdog common framework centrialize the IOCTL interfaces of
device driver now, the SETPRETIMEOUT and GETPRETIMEOUT need to be added
in the common code.
Signed-off-by: Robin Gong
---
drivers/watchdog/watchdog_dev.c | 37 +
include/linux/watchdog.h
This short patch series adds the ability to sample the interrupted
machine state for each hardware sample.
To test this patchset,
Eg:
$perf record -I ls // record machine state at interrupt
$perf script -D //read the perf.data file
Sample output obtained for this patchset/ output looks li
Hi Peter,
[auto build test ERROR on usb/usb-next -- if it's inappropriate base, please
suggest rules for selecting the more suitable base]
url:
https://github.com/0day-ci/linux/commits/Peter-Hung/usb-serial-Add-Fintek-F81532-534-driver/20151103-115336
config: m68k-allyesconfig (attached as .
Hello Linus,
please pull
git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32.git for-linus
to receive the following AVR32 update for 4.3
Alexandre Belloni (1):
avr32: atngw100: remove useless include
arch/avr32/boards/atngw100/mrmt.c | 1 -
1 file changed, 1 deletion(-)
-
On Mon, Nov 02, 2015 at 11:18:37PM -0500, Sinan Kaya wrote:
>
>
> On 11/2/2015 11:15 PM, Vinod Koul wrote:
> >On Mon, Nov 02, 2015 at 01:07:38AM -0500, Sinan Kaya wrote:
> >>This patch adds supporting utility functions
> >>for selftest. The intention is to share the self
> >>test code between dif
Map ID values with corresponding register names.These names are then
displayed when user issues perf record with the -I option
followed by perf report/script with -D option.
Signed-off-by: Anju T
---
tools/perf/arch/powerpc/include/perf_regs.h | 114
tools/perf/confi
Since we need to read voltages of parents as part of setting supply
voltages we need to be able to do get_voltage() internally without
taking locks so reorganize the locking to take locks on the full tree on
entry rather than as we recurse when called externally.
Reported-by: John Stultz
Signed-o
Hi Lee,
On 11/2/2015 5:59 PM, Lee Jones wrote:
drivers/video/backlight/Kconfig| 62 ++
> drivers/video/backlight/Makefile | 7 +
> drivers/video/backlight/lm3532_bl.c| 183 +
> drivers/video/backlight/lm3631_bl.c| 129
On 11/2/2015 9:26 PM, Mark Brown wrote:
On Mon, Nov 02, 2015 at 02:24:35PM +0900, Milo Kim wrote:
LM363X regulator driver supports LM3631 and LM3632.
LM3631 has 5 regulators. LM3632 provides 3 regulators.
One boost output and LDOs are used for the display module.
Boost voltage is configurable bu
Hi Guenter,
On 11/2/2015 11:27 PM, Guenter Roeck wrote:
On 11/01/2015 09:24 PM, Milo Kim wrote:
LM3633 and LM3697 are TI LMU MFD device.
Those device have hardware monitoring feature which detects opened or
shorted circuit case.
Sure, but it only makes sense if you provide standard hwmon attr
This defines list_for_each_entry_lockless. This allows safe list
traversing in cases when lockdep() invocation is unwanted like
real mode (MMU is off).
Signed-off-by: Alexey Kardashevskiy
---
This is for VFIO acceleration in POWERKVM for pSeries guests.
There is a KVM instance. There also can be
Hi Lee,
On 11/2/2015 6:00 PM, Lee Jones wrote:
Is it just me, or have you missed lots of people off Cc?
Ah, that's what I was hesitating...
What is the best way to submit MFD code patches? Cc for all people from
get_maintainer.pl?
Best regards,
Milo
--
To unsubscribe from this list: send th
Dear Arnd,
On Mon, 2 Nov 2015 22:56:02 +0100
Arnd Bergmann wrote:
> On Monday 02 November 2015 11:03:34 Jisheng Zhang wrote:
> > On Fri, 30 Oct 2015 13:42:01 +0100 Arnd Bergmann wrote:
> > >
> > > This is not ideal from an overall maintenance perspective. We want to
> > > be able to have a ker
Hello!
> >>> --- cut exynos5410.dtsi ---
> >>> sromc: sromc@1225 {
> >>> #address-cells = <2>;
> >>> #size-cells = <1>;
> >>> ranges = <0 0 0x0400 0x2
> >>> 1 0 0x0500 0x2
> >>>
Hi Rob,
On 11/2/2015 11:53 PM, Rob Herring wrote:
On Sun, Nov 1, 2015 at 11:01 PM, Milo Kim wrote:
LM3633 LED device is one of TI LMU device list.
Cc: devicet...@vger.kernel.org
Cc: Jacek Anaszewski
Cc: Lee Jones
Cc: linux-kernel@vger.kernel.org
Cc: linux-l...@vger.kernel.org
Signed-off-by:
Hi Gang,
This is not like a right patch.
First, online file check only checks inode's block number, valid flag,
fs generation value, and meta ecc. I never see a real corruption
happened only on this field, if these fields are corrupted, that means
something bad may happen on other place. So fix th
On Mon, Nov 02, 2015 at 05:15:08PM +0800, Valentin Rothberg wrote:
> Hi Peter,
>
> your commit 2fb2884ed856 ("usb: chipidea: delete static debug support")
> has shown up in today's Linux next tree (i.e., next-20151102) and
> removes the Kconfig option USB_CHIPIDEA_D
On Sun, Nov 01, 2015 at 03:41:35PM +0100, Anton Bondarenko wrote:
> From: Anton Bondarenko
>
> RX DMA tail data handling doesn't work correctly in many cases with
> current implementation. It happens because SPI core was setup
> to generates both RX watermark level and RX DATA TAIL events
> incor
Hi Mark,
[auto build test WARNING on regulator/for-next -- if it's inappropriate base,
please suggest rules for selecting the more suitable base]
url:
https://github.com/0day-ci/linux/commits/Mark-Brown/regulator-Use-regulator_lock_supply-for-get_voltage-too/20151103-144509
config: x86_64-ra
It looks like it is worth a check.
julia
On Tue, 3 Nov 2015, kbuild test robot wrote:
> CC: kbuild-...@01.org
> In-Reply-To:
> <1446504512-9079-1-git-send-email-alexandre.bell...@free-electrons.com>
> TO: Alexandre Belloni
> CC: Alessandro Zummo , rtc-li...@googlegroups.com,
> linux-kernel@vg
Hi Peter,
[auto build test ERROR on usb/usb-next -- if it's inappropriate base, please
suggest rules for selecting the more suitable base]
url:
https://github.com/0day-ci/linux/commits/Peter-Hung/usb-serial-Add-Fintek-F81532-534-driver/20151103-115336
config: tile-allyesconfig (attached as .
On 11/3/2015 12:02 AM, Rob Herring wrote:
On Sun, Nov 1, 2015 at 11:24 PM, Milo Kim wrote:
LM3532, LM3631, LM3632, LM3633, LM3695 and LM3697 use common dt-bindings
for describing device.
Cc: devicet...@vger.kernel.org
Cc: Jingoo Han
Cc: Lee Jones
Cc: linux-kernel@vger.kernel.org
Signed-off-
On Tue, Nov 03, 2015 at 12:02:58PM +0900, Minchan Kim wrote:
> Hello Kirill,
>
> On Mon, Nov 02, 2015 at 02:57:49PM +0200, Kirill A. Shutemov wrote:
> > On Fri, Oct 30, 2015 at 04:03:50PM +0900, Minchan Kim wrote:
> > > On Thu, Oct 29, 2015 at 11:52:06AM +0200, Kirill A. Shutemov wrote:
> > > > On
This is a preparation to support for printing other type of callchain
value like count or period.
Cc: Brendan Gregg
Signed-off-by: Namhyung Kim
---
tools/perf/ui/browsers/hists.c | 8 +---
tools/perf/ui/gtk/hists.c | 8 ++--
tools/perf/ui/stdio/hist.c | 35 +--
On 11/02/2015 04:20 PM, Andrzej Hajda wrote:
On 10/06/2015 11:24 AM, Archit Taneja wrote:
mipi_dsi_devices are inherently aware of their host because they
share a parent-child hierarchy in the device tree.
Non-dsi drivers that create a dummy dsi device don't have this data.
In order to get th
Now -g/--call-graph option supports how to display callchain values.
Possible values are 'percent', 'period' and 'count'. The percent is
same as before and it's the default behavior. The period displays the
raw period value rather than the percentage. The count displays the
number of occurrences
It's to track the count of occurrences of the callchains.
Cc: Brendan Gregg
Signed-off-by: Namhyung Kim
---
tools/perf/util/callchain.c | 10 ++
tools/perf/util/callchain.h | 7 +++
2 files changed, 17 insertions(+)
diff --git a/tools/perf/util/callchain.c b/tools/perf/util/callch
On 11/02/2015 04:12 PM, Andrzej Hajda wrote:
On 11/02/2015 07:28 AM, Archit Taneja wrote:
On 10/30/2015 07:51 PM, Andrzej Hajda wrote:
On 10/06/2015 11:24 AM, Archit Taneja wrote:
A driver calling mipi_dsi_device_new might want to unregister the device
once it's done. It might also require
On Mon, Nov 02, 2015 at 02:50:29PM -0600, Michael Welling wrote:
> On Mon, Nov 02, 2015 at 09:19:50AM -0600, Rob Herring wrote:
> > > +Required properties:
> > > + - compatible: "ti,tsc2004"
> > > + - interrupts: IRQ specifier
> > > + - vio-supply : R
Add new call chain option (-g) 'folded' to print callchains in a line.
The callchains are separated by semicolons, and preceded by (absolute)
percent values and a space.
For example, following 20 lines can be printed in 3 lines with the
folded output mode;
$ perf report -g flat --no-children |
Hello,
This is what Brendan requested on the perf-users mailing list [1] to
support FlameGraphs [2] more efficiently. This patchset adds a few
more callchain options to adjust the output for it.
* changes in v3)
- put the value before callchains
- fix compile error
At first, 'folded' outp
On 03.11.2015 15:58, Pavel Fedin wrote:
> Hello!
>
> --- cut exynos5410.dtsi ---
> sromc: sromc@1225 {
> #address-cells = <2>;
> #size-cells = <1>;
> ranges = <0 0 0x0400 0x2
>
On Mon, Nov 2, 2015 at 9:40 PM, Dave Chinner wrote:
> On Mon, Nov 02, 2015 at 08:56:24PM -0800, Dan Williams wrote:
>> No, we definitely can't do that. I think your mental model of the
>> cache flushing is similar to the disk model where a small buffer is
>> flushed after a large streaming write
Hi Paolo,
Never mind, it just takes 2 minutes for me. :)
Thanks,
Fengguang
On Mon, Nov 02, 2015 at 01:19:20PM +0100, Paolo Bonzini wrote:
> Hi Fengguang,
>
> this patch is not ready, and is left for 4.5; see Andy's comment at
> http://permalink.gmane.org/gmane.linux.kernel/2072877. Only the ot
Hi Gang,
I didn't see a need to add a sysfs file for the check and repair. This
leaves a hard problem for customer to decide. How they decide whether
they should repair the bad inode since this may cause corruption even
harder?
I think the error should be fixed by this feature automaticlly if repa
On Mon, Nov 2, 2015 at 9:52 PM, Dave Chinner wrote:
> On Mon, Nov 02, 2015 at 09:31:11PM -0800, Dan Williams wrote:
>> On Mon, Nov 2, 2015 at 8:48 PM, Dave Chinner wrote:
>> > On Mon, Nov 02, 2015 at 07:27:26PM -0800, Dan Williams wrote:
>> >> On Mon, Nov 2, 2015 at 4:51 PM, Dave Chinner wrote:
Hi
On 03.11.2015 06:02, Jeremiah Mahler wrote:
Jarkko, all,
Commit d80d134182ba5 introduced a bug which causes a cyapa based touch
pad on an Acer C720 Chromebook to become inoperative. This is present
in the latest linux-next (20151101). The patch description is repeated
below.
From d80d1
On Tue, Nov 03, 2015 at 09:16:50AM +0200, Kirill A. Shutemov wrote:
> On Tue, Nov 03, 2015 at 12:02:58PM +0900, Minchan Kim wrote:
> > Hello Kirill,
> >
> > On Mon, Nov 02, 2015 at 02:57:49PM +0200, Kirill A. Shutemov wrote:
> > > On Fri, Oct 30, 2015 at 04:03:50PM +0900, Minchan Kim wrote:
> > >
On Mon, Nov 2, 2015 at 4:32 PM, Dave Chinner wrote:
> On Sun, Nov 01, 2015 at 11:30:53PM -0500, Dan Williams wrote:
>> Now that we have the ability to dynamically enable DAX for a raw block
>> inode, make the behavior opt-in by default. DAX does not have feature
>> parity with pagecache backed ma
On Mon, Nov 02, 2015 at 07:16:49AM -0500, Mimi Zohar wrote:
> On Fri, 2015-10-30 at 13:35 +0200, Jarkko Sakkinen wrote:
>
> > @@ -787,6 +791,20 @@ static int getoptions(char *c, struct
> > trusted_key_payload *pay,
> > return -EINVAL;
> > opt->pcrlo
On 11/02/2015 10:11 PM, Robin Gong wrote:
Since the watchdog common framework centrialize the IOCTL interfaces of
device driver now, the SETPRETIMEOUT and GETPRETIMEOUT need to be added
in the common code.
Signed-off-by: Robin Gong
---
It would help if you could document the changes made here
On Mon, Nov 02, 2015 at 07:53:53PM -0300, Arnaldo Carvalho de Melo wrote:
> Em Mon, Nov 02, 2015 at 12:10:25PM +0100, Jiri Olsa escreveu:
> > If machine's thread gets excited (EXIT event is received),
> > we set thread->dead = true and it is later on removed from
> > machine's tree if the pid is re
On Mon, Nov 2, 2015 at 10:30 PM, Vinod Koul wrote:
> On Mon, Nov 02, 2015 at 11:18:37PM -0500, Sinan Kaya wrote:
>>
>>
>> On 11/2/2015 11:15 PM, Vinod Koul wrote:
>> >On Mon, Nov 02, 2015 at 01:07:38AM -0500, Sinan Kaya wrote:
>> >>This patch adds supporting utility functions
>> >>for selftest. Th
On 10/30/2015 07:58 PM, Jason Wang wrote:
>
> On 10/29/2015 04:45 PM, Jason Wang wrote:
>> Hi all:
>>
>> This series tries to add basic busy polling for vhost net. The idea is
>> simple: at the end of tx processing, busy polling for new tx added
>> descriptor and rx receive socket for a while. Th
On Mon, Nov 02, 2015 at 05:50:19PM -0800, Andi Kleen wrote:
> [v4: Addressed all review feedback.]
> [v3: Addressed all review feedback. Update manpage for CSV. Various changes
> (see individual patches). Remove some more redundant code
> in printout callers.]
> [v2: Addressed (near) all
On 11/02/2015 10:11 PM, Robin Gong wrote:
Enable set_pretimeout interface and trigger the pretimeout interrupt before
watchdog timeout event happen.
Signed-off-by: Robin Gong
---
drivers/watchdog/imx2_wdt.c | 58 -
1 file changed, 57 insertions(+),
801 - 870 of 870 matches
Mail list logo
