On 03/25/2014 02:53 PM, 管雪涛 wrote:
> Thanks
>
> Acked-by: Xuetao Guan
>
Thank you too.
> - Chen Gang 写道：
>> Add generic definition just like another architectures have done, or
>> can not pass compiling with allmodconfig, the related error:
>>
>> CC kernel/profile.o
>> kernel/p
On Mon, Mar 24, 2014 at 07:31:11PM +0100, Sabrina Dubroca wrote:
> > Actually gpiolib seems to handle ->dev as optional. Can you try this patch
> > instead? Thanks.
> >
> > diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
> > index bf0f8b476696..642b2bf3360e 100644
> > --- a/
Hi
I have problem with starting lxc containers when SMACK is enabled
on the host. The issue appears when systemd try start user session in
the container. In such case systemd reports error that has not
permissions to set SMACK label. In my test configuration lxc container
has full separation
On Mon, Mar 24, 2014 at 11:58 PM, Imre Deak wrote:
>> [...]
>> Shortlog:
>> Al Viro (6):
>> make prepend_name() work correctly when called with negative
> *buflen
>
> A proper attribution for the above fix would have been nice. Tracking
> down the bug was the main thing after all:
>
> https:
On Monday 24 March 2014 20:35:26 Murali Karicheri wrote:
> +
> +int k2_pcie_platform_setup(struct platform_device *pdev)
> +{
> + struct resource *phy_base_r, *devstat_r;
> + void __iomem *phy_base, *devstat;
> + u32 val;
> + int i;
> +
> + devstat_r = platform_get_resource_byna
Hi Andrew,
After merging the akpm-current tree, today's linux-next build (x86_64
allmodconfig) failed like this:
In file included from include/linux/thread_info.h:11:0,
from arch/x86/include/asm/preempt.h:6,
from include/linux/preempt.h:18,
from
On 03/25/2014 03:17 AM, Alexandre Courbot wrote:
>> diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
>> index 3c9cdda..ebfcf5c 100644
>> --- a/drivers/gpio/gpio-dwapb.c
>> +++ b/drivers/gpio/gpio-dwapb.c
>> @@ -126,7 +126,7 @@ static void dwapb_irq_disable(struct irq_data *d)
>>
>
Morning Pekon,
> >From: Lee Jones
> >
> >Hi Brian,
> >
> >Firstly I'd like to thank you for supporting the inclusion of ST's SPI
> >NOR (FSM) driver. As promised I will convert it over to the new
> >framework once it has been applied by your good self.
> >
> >In the meantime however, I have a NAND
2014-03-25, 09:25:30 +0200, Mika Westerberg wrote:
> On Mon, Mar 24, 2014 at 07:31:11PM +0100, Sabrina Dubroca wrote:
> > > Actually gpiolib seems to handle ->dev as optional. Can you try this patch
> > > instead? Thanks.
> > >
> > > diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-
* Madhavan Srinivasan wrote:
> Performance data for different FAULT_AROUND_ORDER values from 4 socket
> Power7 system (128 Threads and 128GB memory) is below. Fault around order
> (FAO)
> value of 3 looks more advantageous.
>
> FAULT_AROUND_ORDER Baseline1 3
On Mon, Mar 24, 2014 at 11:46 PM, Fabian Mewes
wrote:
> Use the more common kernel coding style.
>
> Signed-off-by: Fabian Mewes
> ---
> applies to next-20140324
> v1..v2: improve commit message as suggested by Joe
>
> drivers/staging/line6/driver.c | 1 +
> drivers/staging/line6/playback.c |
"J. Bruce Fields":
> On Wed, Feb 19, 2014 at 12:27:53AM +0900, J. R. Okajima wrote:
> >
> > There is a regression in
> > 208d0ac 2014-01-07 nfsd4: break only delegations when appropriate
> > which deletes an nfserrno() call in nfsd_setattr() (by accident,
> > probably), and NFSD becomes ignor
Initialise working buffers, accomodating DMA alignment constraints.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 45 +
1 file changed, 45 insertions(+)
diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
index
read or write in 4 Byte chunks at a time until there is less than
8 Bytes remaining, at which point split down into reading the
reset a single Byte at a time.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 72 +
1 file changed, 72 insertion
Display a BUG() message and return appropriate/expected value.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 30 ++
1 file changed, 30 insertions(+)
diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
index 4103d4f..e732bf3
Carry out the normal checks, then attempt to erase a given block.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 85 +
1 file changed, 85 insertions(+)
diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
index 75
Including a dummy function for selecting chips which isn't supported by
our driver, the wait function as requested by the NAND sub system, a read
Byte function also requested by NAND and finally a command function which
provides a partial implementation of MTD/NAND Interface, based on
Hamming-FLEX
于 2014年03月25日 11:42, Ding Tianhong 写道:
> On 2014/3/25 11:00, Zheng Li wrote:
>> In bond mode tlb and alb, inactive slaves should keep inactive flag to
>> 1 to refuse to receive broadcast packets. Now, active slave send broadcast
>> packets
>> (for example ARP requests) which will arrive inactive s
On 24.03.2014 18:39, Paolo Bonzini wrote:
> Il 20/02/2014 16:50, Peter Zijlstra ha scritto:
> > >> One thing I likely should do is to reinstall the exact same laptop
> with 64bit
> > >> kernel and userspace... maybe only 64bit kernel first... and make
> > >> sure
> on my
>
Use the local BBM helpers to check for and mark bad blocks.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 51 +
1 file changed, 51 insertions(+)
diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
index 55f4a4c.
MTD interfaces: Standard set of callbacks for MTD functionality.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 54 +
1 file changed, 54 insertions(+)
diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
index bca
Provide functions to read and write to the Out-Of-Bounds (OOB) area.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 107
1 file changed, 107 insertions(+)
diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
inde
Helper function for bch_mtd_read() and bch_mtd_write() to handle
multi-page or non-aligned reads and writes respectively.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 143
1 file changed, 143 insertions(+)
diff --git a/drivers/mtd/nand/
On 24.03.2014 18:18, Andrew Bresticker wrote:
> On Sun, Mar 23, 2014 at 11:19 PM, Adrian Hunter
> wrote:
>> On 24.03.2014 03:43, Andrew Bresticker wrote:
>>> sdhci_request() and sdhci_card_event() read the cd-gpio via
>>> mmc_gpio_get_cd(), which can sleep, while holding host->lock.
>>> This may
This patch fixes below Sparse warnings -
drivers/bluetooth/ath3k.c:370:17: warning: cast to restricted __le32
drivers/bluetooth/ath3k.c:432:17: warning: cast to restricted __le32
Signed-off-by: Surendra Patil
---
drivers/bluetooth/ath3k.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
On Tue, 2014-03-25 at 01:25 -0700, Surendra Patil wrote:
> This patch fixes below Sparse warnings -
> drivers/bluetooth/ath3k.c:370:17: warning: cast to restricted __le32
> drivers/bluetooth/ath3k.c:432:17: warning: cast to restricted __le32
You are changing output here.
I suspect rom_version sho
Hi Mike,
I want that you take theses patches directly.
Many thanks
Best regards
Gabriel.
On 03/25/2014 06:27 AM, Mike Turquette wrote:
Quoting Gabriel FERNANDEZ (2014-02-27 07:24:14)
+/**
+ * DOC: Clock mux with a programmable divider on each of its three inputs.
+ * The mux has an i
tick_handle_periodic() is calling ktime_add() at two places, first before the
infinite loop and then at the end of infinite loop. We can rearrange code a bit
to fix code duplication here.
It looks quite simple and shouldn't break anything, I guess :)
Signed-off-by: Viresh Kumar
---
kernel/time/
Hi Mike,
On Mon, Mar 24, 2014 at 02:51:20PM -0700, Mike Turquette wrote:
> Quoting Maxime Ripard (2014-03-13 08:14:13)
> > Callers of clk_put must disable the clock first. This also means that as
> > long
> > as the clock is enabled the driver should hold a reference to that clock.
> > Hence, the
Hi,
On Tue, Mar 25, 2014, Surendra Patil wrote:
> This patch fixes below Sparse warnings -
> drivers/bluetooth/ath3k.c:370:17: warning: cast to restricted __le32
> drivers/bluetooth/ath3k.c:432:17: warning: cast to restricted __le32
>
> Signed-off-by: Surendra Patil
> ---
> drivers/bluetooth/at
Helper functions for mtd_write_oob() and mtd_write_oob().
Handles multi-page transfers and mapping between BCH sectors
and MTD page+OOB data.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 136
1 file changed, 136 insertions(+)
diff --git
If none is provided by the platform, the default ECC mode will be used.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 21 +
1 file changed, 21 insertions(+)
diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
index a0f0ae2..3853e7a
On Mon, Mar 24, 2014 at 07:40:06PM -0700, Linus Torvalds wrote:
> I delayed things a day from my normal schedule, hoping I'd feel more
> comfortable doing a 3.14 release, but that was not to be. So here's an
> rc8, and I expect to do the final 3.14 release next weekend.
>
> There wasn't that
Hi all,
This tree still fails (more than usual) the powerpc allyesconfig build.
Changes since 20140324:
The keystone tree gained a conflict against the arm-soc tree.
The powerpc tree still had its build failure.
The net-next tree gained conflicts against the net tree.
The modules tree gained
If a BBT already exists in flash, it's this function's task to locate
it and load it into the driver for local consumption.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 87 +
1 file changed, 87 insertions(+)
diff --git a/drivers/mtd/nand
Return status of the Write Protect bit for the NAND device.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 16
1 file changed, 16 insertions(+)
diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
index 3853e7a..18601e5 100644
--- a/dri
Inform the user of any known bad blocks during initialisation.
Conversely, if there aren't any known bad blocks, let the user know
the good news.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 24
1 file changed, 24 insertions(+)
diff --git a/drivers/mtd
If at start-up time we can't find our own pre-built memory-resident BBT
(e.g. at first run) this routine will search for factory set BBMs and
duplicate them into our own BBT for local consumption.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 27 +++
1 fi
Search the specified (first and, second or last) page in a block for
the BBT. Support Hamming or Advanced Flex Mode (AFM) BBMs too.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 62 +
1 file changed, 62 insertions(+)
diff --git a/drivers/
Issue the core parse partitions and register as MTD device call.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 5 -
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
index abbb4d9..a0f0ae2 100644
--
Including; a check for Ready/NotBusy (RBn) (i.e. wait for current
operation to finish and a method to issue Flex commands to the
controller.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 36
1 file changed, 36 insertions(+)
diff --git a/driv
Once the correct READ/WRITE(SEQIN) commands and address locations have
been sent to the Controller, these calls are able to read/write the
requested information from the FLEX_DATA register.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 77
If load of existing BBT fails (first run), scan device for factory-set
BBMs (Bad-Block Markers) and create a new flash-resident.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 15 +++
1 file changed, 15 insertions(+)
diff --git a/drivers/mtd/nand/stm_nand_bch.c b/dri
Write BBT contents to the first page of a specified block, then
update the IBBT header and write it to last page of the same block.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 29 +
1 file changed, 29 insertions(+)
diff --git a/drivers/mtd/nand/stm
Around Sun 23 Mar 2014 07:12:46 +0800 or thereabout, Chen Gang wrote:
> Is this patch OK?
>
I reread everything you said, and it looks sane.
> If it is necessary to continue analysing more details, please let me
> know, and I will/should continue.
No, I will append it to my for-linus branch, an
Scan block for IBBT signature, either "Bbt0" or "1tbB" from
pre-specified data block.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 91 +
1 file changed, 91 insertions(+)
diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm
Use DMA to read and/or write a single page of data.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 119
1 file changed, 119 insertions(+)
diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
index 7874d85..632359
The STM NAND BCH Controller driver has extended the IBBT header with
some extra convenience properties. This function populates both those
and the standard header specified by 'struct nand_ibbt_header'.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 17 +
1 file c
Including one for programming the BCH sequence, taking care not to
program two registers marked 'reserved' in the NANDi specification.
Failing to take this precaution results in an imprecise data exception
on ARM platforms. We also add an operation which waits on a completion
timeout (released by t
Bad Block Markers (BBMs) keep track of unusable/unsuitable memory
blocks which can prevent unnecessary data loss. These helpers aid in
reading and writing to/from the Bad Block Tables (BBTs) where the BBMs
are stored.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 29
Search for suitable block, erase and write table data to flash. If any
errors occur on selected block, mark it as bad and select another one.
Keep trying until both the Primary and Mirror BBTs are a) synced and
b) written successfully to flash.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_n
A few of the working variables can either be taken or derived from
existing knowledge about the connected chip. Rather than attempt to
provide each specification manually, here we make assumptions based
on information already obtained.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c
Detect an erased page, tolerating and correcting up to a specified number
of bits at '0'. Downgrade uncorrectable ECC error for an erased page,
tolerating 'sectors_per_page' bits at '0'.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 27 +++
1 file changed
Here we automatically select the strongest ECC scheme compatible with
the size of the OOB.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 40
1 file changed, 40 insertions(+)
diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand
Tune BCH programs according to device found and ECC mode.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 121
1 file changed, 121 insertions(+)
diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
index 365a73b..
Some chip characteristics have known incompatibilities with the function
of this driver. Here we check for this characteristics and refuse to run
if they are present.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 39 ++-
1 file changed, 38 ins
On 03/25/2014 04:48 PM, Hans-Christian Egtvedt wrote:
> Around Sun 23 Mar 2014 07:12:46 +0800 or thereabout, Chen Gang wrote:
>> Is this patch OK?
>>
>
> I reread everything you said, and it looks sane.
>
>> If it is necessary to continue analysing more details, please let me
>> know, and I will/
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 9 +
1 file changed, 9 insertions(+)
diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
index fbcd1b9..93fe835 100644
--- a/drivers/mtd/nand/stm_nand_bch.c
+++ b/drivers/mtd/nand/stm_nand_bch.c
@@
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 36
1 file changed, 36 insertions(+)
diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
index 7333ad6..8ab8e7b 100644
--- a/drivers/mtd/nand/stm_nand_bch.c
+++ b/driver
Fetch platform specific data from Device Tree. Any functions which
are useful to other STM NAND Controllers have been separated into a
separate file so they can be easily referenced by them as they
appear.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/Kconfig| 7 ++
drivers/mtd/nand/Ma
This patch adds support for configuring the NAND Controller timing
registers according to 'nand_timing_spec' data. Since the stm_nand_bch
driver falls back to Hamming FLEX mode for certain operations, it is
necessary to configure the timing registers of both the Hamming
Controller and the BCH Contr
Provide some more in-depth structures which will be used heavily within
the driver. We also add a convenience function, used to set the default
values.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 76 +
1 file changed, 76 insertions(+)
d
Populate the standard PM call-backs for; suspend, resume and restore.
Signed-off-by: Lee Jones
q
---
drivers/mtd/nand/stm_nand_bch.c | 39 +++
1 file changed, 39 insertions(+)
diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
ind
Add support for clocks when, and only when, they are supplied. It is
not yet compulsory to provide the BCH and EMI clocks, as Common Clk isn't
supported Mainline yet. Until an implementation lands upstream all clocks
located on STM boards default to always-on.
Signed-off-by: Lee Jones
---
driver
Use the core nand_scan_ident() routine to locate connected NAND chips.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 7 +++
1 file changed, 7 insertions(+)
diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
index e1ebf92..1de13bd 100644
--- a/dri
Obtain IRQ number and request IRQ resource via the usual methods. We're
also registering an IRQ handler to inform us of any completed tasks.
Notice that we're starting to make use of the device struct that we
defined before. In keeping with the subject of the patch, we're also
adding the related lo
The EMISS is a device which, amongst other things, controls various
flash memory modes. We make use of it here merely to flip the
HAMMING_NOT_BCH bit dependant on whether we wish to operate in Hamming
or BCH modes. The STM BCH driver makes good use of the helper introduced
here.
Signed-off-by: Lee
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_bch.c | 56 +
include/linux/mtd/stm_nand.h| 20 +++
2 files changed, 76 insertions(+)
diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
index 76a0d02..1a93f
First introduction of the driver. Includes the basic device struct
(some functionality isn't utilised as of yet) and supplies some of the
important resources required for basic running of the Controller.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/Kconfig| 6 ++
drivers/mtd/nand/Make
This patch adds a new structure, 'nand_timing_spec', to capture the A/C
timing characteristics of NAND devices.
Unfortunately, there is no universally accepted standard for defining
NAND timing parameters. Different datasheets list different sets of
parameters. The ONFI standard gets close, but su
Provide register and bit definitions used by STM's BCH Controller driver.
We place these into a shared location as they will be used by other STM
NAND Controllers as they appear.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/stm_nand_regs.h | 302 +++
1 file c
All,
This patch-set was written against kernel version v3.4, but applies
cleanly to v3.13-rc7 which it is currently based. I understand that
the core has changed significantly since and that some of the
infrastructure this driver provides is now available either through
the framework or similar me
Hi Tanmay,
On: 19/03/2014 23:15, Tanmay wrote:
> Subject: [PATCH v5 1/4] pci: APM X-Gene PCIe controller driver
> Sent by: linux-pci-ow...@vger.kernel.org
>
> This patch adds the AppliedMicro X-Gene SOC PCIe controller driver.
> X-Gene PCIe controller supports maximum up to 8 lanes and GEN3 speed
These functions are utilised by the STM BCH NAND Controller driver.
Signed-off-by: Lee Jones
---
drivers/mtd/nand/nand_base.c | 18 +++---
include/linux/mtd/nand.h | 6 ++
2 files changed, 17 insertions(+), 7 deletions(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/
After commit 74397174989e5 (arm64: Fix duplicated Kconfig entries),
I still get a duplicate Power management options section in linux-next
git repo, may be due to some merge conflicts, anyway, fix that in this
patch.
Signed-off-by: Hanjun Guo
---
Based on linux-next repo, weird, did I miss someth
On Tue, Mar 25, 2014 at 12:11 AM, Andreas Mohr wrote:
> On Mon, Mar 24, 2014 at 10:46:49PM +0100, Daniel Vetter wrote:
>> On Mon, Mar 24, 2014 at 9:40 PM, Mikulas Patocka wrote:
>> > If someone understands the locking issues I pointed out above, it could be
>> > easy to fix.
>>
>> The locking iss
At 2014-03-25 03:14:17,"David Miller" wrote:
>From: Wei Zhang
>Date: Mon, 24 Mar 2014 15:34:31 +0800
>
>> When use the gre vport, openvswitch register a gre_cisco_protocol but
>> does not supply a err_handler with it. The gre_cisco_err() call the
>> err_handler without existence check, cause the
(2014/03/25 4:35), Steven Rostedt wrote:
> On Wed, 05 Mar 2014 20:59:53 +0900
> Masami Hiramatsu wrote:
>
>> There is no need to prohibit probing on the functions
>> used in preparation phase. Those are safely probed because
>> those are not invoked from breakpoint/fault/debug handlers,
>> there
于 2014/3/24 4:50, Satoru Takeuchi 写道:
> At Sun, 23 Mar 2014 15:54:04 +0800,
> Liu Hua wrote:
>>
>> As sysctl_hung_task_timeout_sec is unsigned long, when this value is
>> larger then LONG_MAX/HZ, the function schedule_timeout_interruptible in
>> watchdog will return immediately without sleep and wi
(2014/03/25 4:37), Steven Rostedt wrote:
> On Wed, 05 Mar 2014 21:00:00 +0900
> Masami Hiramatsu wrote:
>
>> There is no need to prohibit probing on the functions
>> used for preparation, registeration, optimization,
>> controll etc. Those are safely probed because those are
>> not invoked from b
(2014/03/25 4:38), Steven Rostedt wrote:
> On Wed, 05 Mar 2014 21:00:07 +0900
> Masami Hiramatsu wrote:
>
>> --- a/kernel/trace/trace_kprobe.c
>> +++ b/kernel/trace/trace_kprobe.c
>> @@ -1209,7 +1209,7 @@ kretprobe_perf_func(struct trace_kprobe *tk, struct
>> kretprobe_instance *ri,
>> * kprob
Original Message from: Ben Hutchings
>
> One piece of my backport to 3.2.y went missing in the forward-port to
> 3.4.y. Can you test 3.4.83 with this patch on top?
>
> Ben.
iwlwifi works with the additional patch, thanks :)
--
To unsubscribe from this list: send the line "unsubscribe linux-ke
One of the comments in tick_handle_periodic() had 'when' instead of 'which' (My
guess :)). Fix it.
Signed-off-by: Viresh Kumar
---
kernel/time/tick-common.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c
index 20b2fe3..79
2014-03-24 19:19 GMT+08:00 Stefan Biereigel :
> Hi,
> thank you for the suggestion. The patch resolves the issue on my N150
> when applied to a clean 3.14-rc7. Anyways I'm wondering if similar
> problems to mine now exist on the Samsung Series 7/9 notebooks?
>
> Is any further action from my part r
Sorry, I sadly do not have any of these machines. If I get my hands on
one, I will post dmidecode.
Thanks for your help,
Stefan
Am 25.03.2014 10:34, schrieb Lan Tianyu:
> 2014-03-24 19:19 GMT+08:00 Stefan Biereigel :
>> Hi,
>> thank you for the suggestion. The patch resolves the issue on my N150
From: Micky Ching
Using non-DMA dump-regs, which would be more exactly for DMA transfer failed.
More careful handle when cmd/data timeout, add stop(CMD12) cmd before go to
finish request when multi-rw timeout.
Remove some static checher warings.
on commit:
drivers/mmc/host/rtsx_pci_sdmmc.c:194
From: Micky Ching
Add new command type(R1 without CRC) handle, without this
patch mmc card initialize will be failed.
Using a more careful handle in request timeout, this would
improve error recover capability. Debug info is printed
using non DMA mode, this would help print more accurately
for D
From: Micky Ching
commit a27fbf2f067b0cd6f172c8b696b9a44c58bfaa7a
produced a cmd.flags unhandled in realtek pci host driver.
This will make MMC card failed initialize, this patch is
used to handle the new cmd.flags condition and MMC card can be used.
Signed-off-by: Micky Ching
---
drivers/mmc
On 03/19/2014 12:10 PM, George Cherian wrote:
> Add USB and USB PHY reference clock data
>
> Signed-off-by: George Cherian
Acked-by: Roger Quadros
cheers,
-roger
> ---
> arch/arm/boot/dts/am43xx-clocks.dtsi | 32
> 1 file changed, 32 insertions(+)
>
> diff -
Hello Lee,
[...]
>> I can help reviewing those patches, if you can please share your
>> controller specs, and also share if there are any already know
>> hardware limitations.
>
>Thanks for your kind offer. I will send it right away.
>
Is the spec for this controller available in public domain som
freezing is nothing related to pools, but POOL_FREEZING adds a connection,
and causes freeze_workqueues_begin() and thaw_workqueues() complicated.
Since freezing is workqueue instance attribute, so we introduce __WQ_FREEZING
to wq->flags instead and remove POOL_FREEZING.
we set __WQ_FREEZING only
Hi Hanjun,
On 25/03/14 09:00, Hanjun Guo wrote:
> After commit 74397174989e5 (arm64: Fix duplicated Kconfig entries),
> I still get a duplicate Power management options section in linux-next
> git repo, may be due to some merge conflicts, anyway, fix that in this
> patch.
>
I reported this and Ma
Signed-off-by: Emil Medve
---
This is a minor cleanup
arch/x86/mm/numa.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 27aa0455..6b5e231 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -559,7 +559,7 @@ static
Signed-off-by: Emil Medve
---
This is a small cleanup
mm/memblock.c | 24 +++-
mm/page_alloc.c | 10 +-
2 files changed, 16 insertions(+), 18 deletions(-)
diff --git a/mm/memblock.c b/mm/memblock.c
index 39a31e7..2b2aaf8 100644
--- a/mm/memblock.c
+++ b/mm/membloc
Hi Alexey,
On Mon, Mar 24, 2014 at 04:41:43PM +0300, Alexey Dobriyan wrote:
> > - ONE("stack", S_IRUGO, proc_pid_stack),
> > + ONE("stack", S_IRUSR, proc_pid_stack),
>
> no love for /proc/*/wchan?
Yes you are right, didn't want to modify lot of things, and I missed that one.
So there
Il 24/03/2014 21:49, Christian Borntraeger ha scritto:
event_legacy_tracepoint:
+PE_NAME '-' PE_NAME ':' PE_NAME
+{
+ struct parse_events_evlist *data = _data;
+ struct list_head *list;
+ char sys_name[strlen($1) + strlen($3) + 2];
+ sprintf(&sys_name, "%s-%s", $1, $3);
+
There is no way to support the hid-type AFO multi touch modules.
Add the VID/PID of AFO to the hid-related lists.
Kernel Version : linux-3.14.rc7
Signed-off-by: Yonghwan Ki
diff -uprN -X Documentation/dontdiff ./drivers/hid/hid-core.c
../linux-3.14-rc7/drivers/hid/hid-core.c
--- ./drivers/hi
Signed-off-by: Xiubo Li
---
drivers/watchdog/imx2_wdt.c | 40 +++-
1 file changed, 31 insertions(+), 9 deletions(-)
diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index 1795922..c410981 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/dri
Signed-off-by: Xiubo Li
---
drivers/watchdog/imx2_wdt.c | 12 ++--
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index dd51d95..1795922 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -
This patches are preparing for Vybird, LS1 and LS2. And on LS1 the IP will
in BE mode.
And this has been test on Vybird.
Xiubo Li (2):
watchdog: imx2_wdt: Sort the header files alphabetically
watchdog: imx2_wdt: Add big-endian support
drivers/watchdog/imx2_wdt.c | 52 ++
1 - 100 of 605 matches
Mail list logo
