This is odd:
System:
AMD AthlonThunderbird 850, Chaintech 7AIA MB
Seems 2.4.0 isn't affected (dmesg related to ACPI:)
ACPI: System description tables found
ACPI: System description tables loaded
ACPI: Subsystem enabled
ACPI: System firmware supports: C2
ACPI: System firmware supports: S0 S1 S4
"H. Peter Anvin" <[EMAIL PROTECTED]> writes:
> Do you need it for POSIX shm or not... if so, I would say you do need it
> (even if it's going to take some time until POSIX shm becomes widely
> used.)
Yes, you need it. glibc 2.2 will search for a shm fs on shm_open. And
without it fails. And the
hi!
When I download big files with a win-client from my linux-server with samba 2.07 and
kernel 2.4.1 (just downloaded to test the new driver) after a random
time there is a connection-error! ..when I just download a few
megabytes there is no problem.
/var/log/messages on the linux-server with t
"J . A . Magallon" <[EMAIL PROTECTED]> writes:
> There was a post recently (that now I can't find), that said the shm
> management was done with an interal fs. Was that Posix or sysv shm ?
SYSV shm and shared anonymous mappings are using a kern_mount of
shm/tmpfs. So the CONFIG_TMPFS does only m
Mike Galbraith <[EMAIL PROTECTED]> writes:
> However, tmpfs appears to cover the functionality provided by ramfs.
> Are there any uses for ramfs which can't be handled by tmpfs?
Nothing I know of.
> The only thing I could think of was "what if you don't have a
> swap device up and running". Se
It happened with 2.4.0, it continues to happen with 2.4.1 too
root@penny:~ # ps -ax|grep devfs
48 ?S 0:00 /sbin/devfsd /dev
6300 pts/0S 0:00 grep devfs
root@penny:~ # cd /dev
root@penny:/dev # ls
Segmentation fault
root@penny:/dev # ps -ax|grep devfs
6309 pts/0S
On Sun, 4 Feb 2001, Marko Kreen wrote:
> On Sat, Feb 03, 2001 at 11:05:44PM +0100, [EMAIL PROTECTED] wrote:
> Compile in options 'SCSI generic', 'SCSI cdrom and 'SCSI
> emulation support' then add 'hdb=scsi' to kernel parameters.
is there someone working on direct support for Atapi-cdrw this time
>/var/log/messages on the linux-server with the d-link dfe-530 tx:
>[THIS IS THE ERROR-MESSAGE!]
>Feb 1 17:25:56 Nethost kernel: NETDEV WATCHDOG: eth0: transmit timed out
>Feb 1 17:25:56 Nethost kernel: eth0: Transmit timed out, status ,
>PHY status 782d, resetting...
>
>after booting ever
Hi
I was trying to burn cds under linux-2.4.1 with
devFS enabled. But x-cd-roast (and also cdrecord)
do not find any scsi drives. I guess they have been
renamed or something like that, I cannot find them
in /dev, nor anywhere in /dev/scsi ...
Oh, and could anybody tell me, how I stop RH7
> If I have vmstat running, I notice blocks trickling out to the disk, 5sec averages
> 495,142,151,155,136,257,15,0. Note that the maximum read rate (hdparm -t) of this
> disk is in the 12-14M/s range. I'm getting about 1-5% of that on output with the
> system's disk subsystem being apparently u
> What does it typically mean when accept returns 0
> and that the perror outputs "Interupted system call"??
Since 'accept' returning zero is not an error, the results of 'perror' are
meaningless. Please read the manual page for 'accept' and notice that it
says, "The call returns -1 on e
> > can bracket his code in 'if [ $TRUSTED = "y" ] ... fi', so if some driver-fs
> > fails with untrusted compilers it is just not selectable.
>
> What kind of crap is this?
> It is not the kernel's job to work around RedHat bugs.
The kernel actually works round gcc 2.7.2, egcs-1.1.2 and gcc-2.9
> Ok, I rebooted the system, then syslogd was using 100% cpu?
> it seems like perhaps reiserfs is causing this problem??
Typically it means your syslogd (klogd actually) is too old and has a bug that
a 0 length printk causes it to spin.
-
To unsubscribe from this list: send the line "unsubscribe
I found that 2.2.18 probably rudely drops samples (lets ocassionally one sample
be played several times) on the Gravis Ultrasound output device. I use 2.2.18
and the native kernel drivers. I wrote this program that should produce a clean
sine tone. Instead I hear a sine interspaced with crackling.
The program you attached worked perfectly for me. You need to
'fflush(stdout);' after each 'printf'. You didn't expect perfect alternation
did you? That's totally unrealistic. You cannot use the scheduler as a
synchronization mechanism.
--
Thread1
Thread1
Thread2
Thread1
Thread1
Thread2
Hi,
>This sounds every much like it's related to the problems we're having with
>the card not initialising on reboot from Windows.
>
>What's the bets we're looking at a new revision of the chip which VIA
>haven't (publically) released documentation for yet? I'd say they're
>pretty high...
I had
-Ursprüngliche Nachricht-
Von: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]Im Auftrag von Friedrich
Lindenberg
Gesendet: Sonntag, 4. Februar 2001 11:36
An: [EMAIL PROTECTED]
Betreff: AW: ATAPI CDRW which doesn't work -> devfs problems
Hi
I was trying to burn cds under linux-2.4.1 wi
On Sat, 3 Feb 2001, Russell King wrote:
> Albert D. Cahalan writes:
> > The units seem to vary. I suggest using fundamental SI units.
> > That would be meters, kilograms, seconds, and maybe a very
> > few others -- my memory fails me on this.
>
> iirc, SI comes from France, and therefore it shou
> This sounds every much like it's related to the problems we're having with
> the card not initialising on reboot from Windows.
It's not the same problem. Here the card initializes just fine. And it
works for a while.
The "transmit timed out" message is simply saying that we told the card to
Hi all,
System: kernel 2.4.1 util-linux-2.10r cdrecord-1.9 modutils-2.3.21
I have a cd writer and a cdrom in the same pc. When the kernel has SCSI
support compiled as a module, cdrecord doesn't find anything (hdb=ide-scsi
is passed with lilo). When is compiled with built-in scsi support, the
wr
On Sun, Feb 04, 2001 at 12:07:28PM +0100, [EMAIL PROTECTED] wrote:
> The crackling is not dependent on the buffer size you can set up in the C code.
> The crackling is dependent on the frequency of the sine. It's clearly audible
> (read: annoying) at 10kHz, audible at 1kHz, inaudible at 100Hz. So
Urban Widmark wrote:
>
> The "transmit timed out" message is simply saying that we told the card to
> send something but it hasn't generated an interrupt or anything allowing
> the driver to know the packet was actually sent.
>
check via_rhine_tx_timeout():
the function is basically empty.
>
>
On Sun, 4 Feb 2001, Manfred Spraul wrote:
> > Oh, that's known already. They haven't released any info on the older
> > "VT3043" chip either, afaik. And the vt86c100a.pdf document is just a
> > preliminary version.
> >
> Where can I find that file?
> I'll try to implement tx_timeout()
http://ww
On Sat, 3 Feb 2001, Josh Myer wrote:
> Hello all,
>
> I know this _really_ isn't the forum for this, but a friend of mine has
> noticed major, persistent clock drift over time. After several weeks, the
> clock is several minutes slow (always slow). Any thoughts on the
> cause? (Google didn't sho
James Sutherland wrote:
>
> On Sat, 3 Feb 2001, Russell King wrote:
>
> > Albert D. Cahalan writes:
> > > The units seem to vary. I suggest using fundamental SI units.
> > > That would be meters, kilograms, seconds, and maybe a very
> > > few others -- my memory fails me on this.
> >
> > iirc, S
>Hi,
>
>On Fri, Feb 02, 2001 at 12:51:35PM +0100, Christoph Hellwig wrote:
>> >
>> > If I have a page vector with a single offset/length pair, I can build
>> > a new header with the same vector and modified offset/length to split
>> > the vector in two without copying it.
>>
>> You just say in th
Pierfrancesco Caci wrote:
>48 ?S 0:00 /sbin/devfsd /dev
on my box devfsd has pid 15, it comes just after the [kdaems]
1 ?S 0:04 init
2 ?SW 0:00 [keventd]
3 ?SW 0:00 [kapm-idled]
4 ?SW 0:00 [kswapd]
5 ?
On 4 Feb 2001, Christoph Rohland wrote:
> Yes and no. tmpfs has a little bit overhead for the noswap case but
> this overhead is in the kernel anyways for shared anon mappings. The
> whole vm is using swap unconditionally.
I'm hoping that'll end up conditional on CONFIG_BLK_DEV or CONFIG_SWAP.
:-> "Pierre" == Pierre Rousselet <[EMAIL PROTECTED]> writes:
> Pierfrancesco Caci wrote:
>> 48 ?S 0:00 /sbin/devfsd /dev
> on my box devfsd has pid 15, it comes just after the [kdaems]
> and it works with 2.4.x
I can't see how this can affect performance/funtional
try to add the following to /etc/modules.conf ...
pre-install sg modprobe -k sr_mod
pre-install sr_mod modprobe -k ide-scsi
pre-install ide-scsi modprobe -k ide-cd
pre-install ide-cd modprobe -k ide-probe-mod
options ide-cd ignore="hdc"
... that's assuming you want to use hdc as the ide cdrw
On Sun, 4 Feb 2001, James Sutherland wrote:
> For the end-user, the ability to see readings in other units would be
> useful - how many people on this list work in litres/metres/kilometres,
> and how many in gallons/feet/miles? Probably enough in both groups that
> neither could count as universa
Hello,
When using kmalloc(size_t size), do I get a guaranty that the memory region
allocated is aligned according to the size specified ?
More to the point, if I call kmalloc for type int on an IA64 architecture is
the pointer going to be 8 bytes aligned ?
Shmulik Hen
Software E
David Woodhouse wrote:
> On Sun, 4 Feb 2001, James Sutherland wrote:
>
> > For the end-user, the ability to see readings in other units would be
> > useful - how many people on this list work in litres/metres/kilometres,
> > and how many in gallons/feet/miles? Probably enough in both groups that
On Sun, Feb 04, 2001 at 11:16:16AM +0100, Joachim 'roh' Steiger wrote:
> On Sun, 4 Feb 2001, Marko Kreen wrote:
> > Compile in options 'SCSI generic', 'SCSI cdrom and 'SCSI
> > emulation support' then add 'hdb=scsi' to kernel parameters.
> is there someone working on direct support for Atapi-cdrw
Hi,
as I've posted before in [SoftwareRAID in 2.4.1],
I wasn't able to get RAID0 working
with devfs enabled and mounted on /dev.
The problem had gone after I passed devfs=nomount,
and used old device names for configuring/starting raid:
/dev/md0 instead of /dev/md/0
/dev/sda1 instead of /dev/sc
I just noticed that running
. /usr/src/linux/script/ver_linux
prints out strange libc version when I run it
as a normal user. It prints out expected output if
I run it as superuser.
Output Example: Incorrect and correct examples.
Binutils 2.10.0.26
! Linux C Library
"Michael B. Trausch" wrote:
>
> On Sat, 3 Feb 2001, Josh Myer wrote:
>
> > Hello all,
> >
> > I know this _really_ isn't the forum for this, but a friend of mine has
> > noticed major, persistent clock drift over time. After several weeks, the
> > clock is several minutes slow (always slow). Any
In my wifes' machine 2.4.1 (both vanilla and -ac2) enabling ACPI causes
the machine to run so slowly it's unusable. On my machine it's OK.
2.4.0 worked fine, so something has changed between 2.4.0 and 2.4.1 that
broke it. I couldn't find anything in dmesg that looked any different,
though.
Hi Alan,
The following patch make shmem_statfs report some sensible size
estimates in the case that the user does not give a size limit.
This should make it more error prone when used as /tmp
Greetings
Christoph
diff -uNr 2.4.1-tmpfs/mm/shmem.c 2.4.1-tmpfs-fstat/mm/shmem.c
---
Technical explanations aside, some sort of clock drift exists in all
computers. My experience with Sun hardware, for instance, was that the
hardware and software clocks rarely agreed.
You should set up your machines to use some sort of time synchronization
software, such as ntp or rdate. When
Hi,
this is my second version of tmpfs against 2.4.1. It adds more
resonable reporting on statfs when there is no size limit given.
Have fun
Christoph
diff -uNr 2.4.1/Documentation/Changes 2.4.1-tmpfs-fstat/Documentation/Changes
--- 2.4.1/Documentation/Changes Tue Jan 30 11:06:
Urban Widmark wrote:
>
> On Sun, 4 Feb 2001, Manfred Spraul wrote:
>
> > > Oh, that's known already. They haven't released any info on the older
> > > "VT3043" chip either, afaik. And the vt86c100a.pdf document is just a
> > > preliminary version.
> > >
> > Where can I find that file?
> > I'll t
On Sun, 4 Feb 2001, Ben Ford wrote:
> David Woodhouse wrote:
>
> > On Sun, 4 Feb 2001, James Sutherland wrote:
> >
> > > For the end-user, the ability to see readings in other units would be
> > > useful - how many people on this list work in litres/metres/kilometres,
> > > and how many in gallo
"Hen, Shmulik" wrote:
>
> When using kmalloc(size_t size), do I get a guaranty that the memory region
> allocated is aligned according to the size specified ?
> More to the point, if I call kmalloc for type int on an IA64 architecture is
> the pointer going to be 8 bytes aligned ?
>
Yes, kmalloc
Pierfrancesco Caci wrote:
> I can't see how this can affect performance/funtionality of
> devfsd. Can you try to stop the daemon and restart it to see if
> continues to work as before ?
/dev is mounted at boot time by the kernel (CONFIG_DEVFS_MOUNT=y).
The system boots and runs without devfsd. Y
Actually yes. We were warned that on IA64 architecture the system will halt
when accessing any type of variable via a pointer if the pointer does not
contain an aligned address matching that type. Until now we were using a
method of receiving a pointer to an array, casting it to a pointer of a
str
James Sutherland wrote:
>
> On Sun, 4 Feb 2001, Ben Ford wrote:
>
> > David Woodhouse wrote:
> >
> > > On Sun, 4 Feb 2001, James Sutherland wrote:
> > >
> > > > For the end-user, the ability to see readings in other units would be
> > > > useful - how many people on this list work in litres/metr
Ok, but fd 0 cant be a valid socket since its the stdin
I posted that on this mailing list coz I thought that this might be a scaling
problem since it happens when theres already several clients connected to the
server
On Sun, 04 Feb 2001, David Schwartz wrote:
> > What does it typically mean wh
On Sun, 4 Feb 2001, James Sutherland wrote:
> On Sun, 4 Feb 2001, Ben Ford wrote:
> > David Woodhouse wrote:
> > > Yeah. We can have this as part of the locale settings, changeable by
> > > echoing the desired locale string to /proc/sys/kernel/lc_all.
> >
> > Just an idea, . . but isn't this som
On Sat, 03 Feb 2001, you wrote:
> > What does it typically mean when accept returns 0
> > and that the perror outputs "Interupted system call"??
>
> During the call, your process received a signal.
> Most system calls are affected in this way, so that
> you may break out of what you are doing by
:-> "Pierre" == Pierre Rousselet <[EMAIL PROTECTED]> writes:
> /dev is mounted at boot time by the kernel (CONFIG_DEVFS_MOUNT=y).
> The system boots and runs without devfsd. You just can't start any
> process calling for non-existing device under /dev and not created
> by devfsd
> It appears that we are coming across 2 kinds of requirements for kiobuf
> vectors - and quite a bit of debate centering around that.
>
> 1. In the block device i/o world, where large i/os may be involved, we'd
> 2. In the networking world, we deal with smaller fragments (for protocol
Its proba
On Mon, 5 Feb 2001, Steve Underwood wrote:
> James Sutherland wrote:
> > On Sun, 4 Feb 2001, Ben Ford wrote:
> > > David Woodhouse wrote:
> > > > On Sun, 4 Feb 2001, James Sutherland wrote:
> > > >
> > > > > For the end-user, the ability to see readings in other units would be
> > > > > useful - h
"Hen, Shmulik" <[EMAIL PROTECTED]> writes:
> Actually yes. We were warned that on IA64 architecture the system will halt
> when accessing any type of variable via a pointer if the pointer does not
> contain an aligned address matching that type. Until now we were using a
That will need to be fix
> > I've got those kind of message now :
> >
> > Feb 4 07:18:35 Line kernel: scsi : aborting command due to timeout : pid 0,
>scsi0, channel 0, id 0, lun 0 Read (10) 00 00 00 00 2e 00 00 01 00
>
> If this is a correct ISO9660 cd you should not see those
> messages. It is either hardware prob
> > Yeah. We can have this as part of the locale settings, changable by
> > echoing the desired locale string to /proc/sys/kernel/lc_all.
>
> Just an idea, . . but isn't this something better done in userland?
Please remember this is an international list. For the benefit of certain
users pleas
Thus spoke Michael B. Trausch:
> On Sat, 3 Feb 2001, Josh Myer wrote:
>
> > Hello all,
> >
> > I know this _really_ isn't the forum for this, but a friend of mine has
> > noticed major, persistent clock drift over time. After several weeks, the
> > clock is several minutes slow (always slow). Any
Hi. Axel Boldt, Alan Cox, Linus Torvalds.
We found Configure.help typo. please fix it.
for 2.2.X
--- linux.orig/Documentation/Configure.help Mon Feb 5 02:07:04 2001
+++ linux/Documentation/Configure.help Mon Feb 5 02:07:52 2001
@@ -1530,7 +1530,7 @@
inserted in and removed from th
Michael Rothwell wrote:
> > It also doesn't seem to work in 2.2. :) The original development of
> > this driver was going on at http://drivers.rd.ilan.net/kaweth/ but there
> > have been no updates for quite some time.
>
> Well, it doesn't work you _you_ on 2.2, obviously. But it works for us
Pierfrancesco Caci wrote:
> Yes I know this. Actually, booting with "devfs=nomount s" is the only
> way to update the boot record with lilo and my existing lilo.conf.
i can't do that on my box, /dev is only a mount point for devfs.
assuming your /dev directory is dirty from something else than
I waited out the boot so I could login and experiment, but it was
painfully slow.
Compiling with just APM in and no ACPI, results in a correctly-running
machine with rh7 gcc-2.96-69.
I got lucky this time that with APM worked, else I'd be stuck with slowly
fscking, since this last boot I had to
> I waited out the boot so I could login and experiment, but it was
> painfully slow.
>
> Compiling with just APM in and no ACPI, results in a correctly-running
> machine with rh7 gcc-2.96-69.
Lots of people are seeing this. Stick to APM for now until the acpi folks fix
it.
-
To unsubscribe from
What version of Linux are you using ? What I see is the following:
Thread1
Thread1
Thread1
Thread1
Thread1
Thread2
Thread2
Thread2
Thread2
Thread2
Also, it is NOT unrealistic to expect perfect alternation. The defini
[ Linux-kernel added to the cc, as others probably also wonder ]
On Sat, 3 Feb 2001, David D.W. Downey wrote:
>
> How often does Alan's patches get rolled into your main line? I'm
> having difficulty following the divergence here. I'm trying to run THE
> latest release(s) of your kernel wi
In article <01020411401700.00110@grndctrl> you wrote:
> Ok, but fd 0 cant be a valid socket since its the stdin
if you have closed stdin (like all daemons usually do) you will get fd 0 on
next open. There is nothing magical about fd0 or fd1.
Greetings
Bernd
-
To unsubscribe from this list: send t
>I've discovered that heavy use of vesafb can be a major source of clock
>drift on my system, especially if I don't specify "ypan" or "ywrap". On my
This is extremely interesting. What version of ntp are you using?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
th
Thus spoke Hacksaw:
> >I've discovered that heavy use of vesafb can be a major source of clock
> >drift on my system, especially if I don't specify "ypan" or "ywrap". On my
>
> This is extremely interesting. What version of ntp are you using?
>
The RH7 rpm -- ntp-4.0.99k-5
-Tom
--
Tom Eastep
On Sun, Feb 04, 2001, Andi Kleen <[EMAIL PROTECTED]> wrote:
> "Hen, Shmulik" <[EMAIL PROTECTED]> writes:
>
> > Actually yes. We were warned that on IA64 architecture the system will halt
> > when accessing any type of variable via a pointer if the pointer does not
> > contain an aligned address m
On Tue, 30 Jan 2001, Rick Jones wrote:
> > > How does ZC/SG change the nature of the packets presented to the NIC?
> >
> > what do you mean? I am _sure_ you know how SG/ZC work. So i am suspecting
> > more than socratic view on life here. Could be influence from Aristotle;->
>
> Well, I don't k
Alan Cox wrote:
> But try 2.4.1 before worrying too much. That fixed a lot of the block
> performance problems I was seeing (2.4.1 ruins the VM performance under paging
> loads but the I/O speed is fixed ;))
---
Seems to have gotten a bit worse. Vmstat output after 'vmware' had completed
Well, strangely, it stopped as it started?
I don't know what caused it to go loopy but then it just stopped. Im using:
syslogd -ver
syslogd 1.4-0
klogd -v
klogd 1.4-0
I thought this only affected older versions?
Shawn.
Alan Cox wrote:
> > Ok, I rebooted the system, then syslogd was using 10
> Well, strangely, it stopped as it started?
> I don't know what caused it to go loopy but then it just stopped. Im using:
> syslogd -ver
> syslogd 1.4-0
>
> klogd -v
> klogd 1.4-0
>
> I thought this only affected older versions?
Yep. So something else happened in this case. I don't know what b
On 02.04 Mathieu Dube wrote:
> Ok, but fd 0 cant be a valid socket since its the stdin
>
> I posted that on this mailing list coz I thought that this might be a scaling
> problem since it happens when theres already several clients connected to the
> server
>
It just mean that your stdin was c
Friedrich Lindenberg wrote:
> I was trying to burn cds under linux-2.4.1 with
> devFS enabled. But x-cd-roast (and also cdrecord)
> do not find any scsi drives. I guess they have been
> renamed or something like that, I cannot find them
> in /dev, nor anywhere in /dev/scsi ...
xcdroast expects
Well, i found something in my logs:
This really is weird :)
Shawn.
Alan Cox wrote:
> > Well, strangely, it stopped as it started?
> > I don't know what caused it to go loopy but then it just stopped. Im using:
> > syslogd -ver
> > syslogd 1.4-0
> >
> > klogd -v
> > klogd 1.4-0
> >
> > I though
I've been attempting to get two Promise Ultra66 controllers working
with an Asus P2B-F motherboard. I've got one controller successfully
working, but as soon as I stick the second controller in the computer,
the system refuses to boot.
With 2.2.18 and the linux-ide patches (Uniform E-IDE 6.30),
On Mon, 05 Feb 2001 02:22:11 +, Keitaro Yosimura wrote:
> Hi. Axel Boldt, Alan Cox, Linus Torvalds.
This might be a good time to mention Axel has passed maintainership of
Configure.help to myself. I'm currently working to combine Axel's fork
against Linux 2.4.1's Configure.help, which is requ
On Sun, Feb 04, 2001 at 12:28:30AM +0100, Jean-Eric Cuendet wrote:
>
> Hi,
> I have a server with RAID1 partitions with linux 2.4.1 (stock,
> self-compiled) installed.
> It was easy to create the RAID partitions but when booting, no
> auto-detection is successful.
> The kernel says that autodetec
Ok, here's the crash I'm getting in 2.4.0. Same thing is happening in 2.4.1,
but It's dying harder so getting syslog info out is tougher.
Looks like it's trying to write WAY past the end of a drive (from some messages
that unfortunatly did not get logged, but were scrolling on the screen) but
Greetings.
Does anyone know what would cause a lockup when (2.4.x):
* supsending to disk
* changing from X to a virtual console
with APM enabled? Changing from X to a VC functions when APM is
compiled out.
Essentially, the screen blanks once and the machine locks up.
Usually while suspen
On Mon, 29 Jan 2001, Jamie Lokier wrote:
> Unfortunately getting the same IP is rare now, so I've been toying with
> running a PPP tunnel through a fixed host out on the net. The tunnel
> would be dropped and recreated with each new connection. My local link
> IP would change, but the tunnel IP
Howdy everyone,
I own a M-Technology M-668DS motherboard. Linux 2.4.1
identifies my board as a Soyo SY-6KD. They're not really
the same board, and they each have features the other doesn't
have. (The 668DS has onboard SCSI, where as the 6KD doesn't.
The 6
[EMAIL PROTECTED] said:
> I own a M-Technology M-668DS motherboard. Linux 2.4.1
> identifies my board as a Soyo SY-6KD. They're not really
> the same board, and they each have features the other doesn't
> have. (The 668DS has onboard SCSI, where as the 6KD doesn't.
>
Thanks. Has Brad Hards made his version available somewhere?
-M
- Original Message -
From: "Eric Sandeen" <[EMAIL PROTECTED]>
To: "Michael Rothwell" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Sunday, February 04, 2001 9:30 AM
Subject: Re: "kaweth" usb ethernet driver in 2.4?
> Mi
David Woodhouse wrote:
> On Sun, 4 Feb 2001, James Sutherland wrote:
> > On Sun, 4 Feb 2001, Ben Ford wrote:
> > > David Woodhouse wrote:
> On Sun, 4 Feb 2001, James Sutherland wrote:
>
> > For the end-user, the ability to see readings in other units would be
> > useful - how many people on this
Managed to get 2.4.1 to Oops without locking up entirely:
I have no idea what's causing this... I just mkfs'ed all the drives fresh, so there
shouldn't be any filesystem corruption.
Ideas?
Unable to handle kernel paging request at virtual address d8958100
c0130704
*pde =
Oops:
CP
On Sun, 04 Feb 2001 10:31:35 -0500, you wrote:
>Technical explanations aside, some sort of clock drift exists in all
>computers. My experience with Sun hardware, for instance, was that the
>hardware and software clocks rarely agreed.
>
>You should set up your machines to use some sort of time s
Last kernel that booted was Redhat's build of 2.4.0-pre11. I'm not sure
where the issue is at, so I attach a log of the system booting up.
It's an ASUS P2B-DS with dual Deschutes PII-450s.
Anybody with a clue as to where to look, please advise. (Have other boot
logs)
--
Though I was successfull using my cdwriter under the pre series and win98 it
fails using 2.4.x (i tested it with 2.4.0 and 2.4.2-pre1).
cd writer software in use:
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
caps according to hdparm:
/dev/hdd:
Model=PHILIPS CDD361
On 4 Feb 2001, at 23:31, Urban Widmark wrote:
> On Sun, 4 Feb 2001, Manfred wrote:
>
> > Ok, I've attached a patch that performs an unconditional reset in
> > tx_timeout().
> >
> > I don't have the hardware, could you test it?
>
> The changed startup code doesn't break anything for me.
>
> >
The following files explicitly include linux/modversions.h. They
should not do this, the Makefiles are responsible for automatically
including modversions.h. Since modversions.h will disappear in 2.5,
consider this advance warning that the offending sources can expect
problems.
Maintainers: ple
Keith Owens wrote:
> Maintainers: please fix these sources by removing modversions.h.
[...]
> drivers/net/epic100.c
> drivers/net/starfire.c
Fixed.
Jeff
--
Jeff Garzik | "You see, in this world there's two kinds of
Building 1024 | people, my friend: Those with loaded guns
I get this message when shutting down Linux with 2.4.1 kernel,
kernel PCMCIA support compiled as a module.
-
$ cat /proc/ioports
...
03e0-03e1 : i82365
...
$ sudo reboot
(reboot)
$ grep 3e0 /var/log/messages
Feb 4 1
> Ok, but fd 0 cant be a valid socket since its the stdin
Wrong. fd 0 can be a valid socket. Read the man page to 'accept' again.
Remember again that zero is a non-negative integer.
> I posted that on this mailing list coz I thought that this might
> be a scaling
> problem since it happ
> What version of Linux are you using ? What I see is the following:
I'm using 2.4.1-pre10, glibc 2.1.3.
> Thread1
> Thread1
> Thread1
> Thread1
> Thread1
> Thread2
> Thread2
> Thread2
> Thread2
> Thread2
That's totall
On Sun, Feb 04 2001, LA Walsh wrote:
> Seems to have gotten a bit worse. Vmstat output after 'vmware' had completed
> write -- but system unresponsive and writing out a 155M file...
Your numbers seem way too much off to have much to do with i/o scheduling
fairness, but there is a slight bu
On Sat, Feb 03 2001, [EMAIL PROTECTED] wrote:
> Feb 3 22:08:25 Line kernel: hdb: irq timeout: status=0xd0 { Busy }
> Feb 3 22:08:25 Line kernel: hdb: DMA disabled
> Feb 3 22:08:55 Line kernel: hdb: ATAPI reset timed-out, status=0x90
> Feb 3 22:08:55 Line kernel: hda: DMA disabled
Try disablin
Miles Lane wrote:
>
> Jeff Garzik wrote:
> >
> > On Fri, 2 Feb 2001, Miles Lane wrote:
> > > I asked David Hinds to write up an outline of the things that
> > > will be needed to get PCMCIA support cleanly and completely
> > > integrated into the kernel tree.
> > >
> > > David has expressed that
On Sun, 4 Feb 2001, Tom Eastep wrote:
> Thus spoke Michael B. Trausch:
>
> > On Sat, 3 Feb 2001, Josh Myer wrote:
> >
> > > Hello all,
> > >
> > > I know this _really_ isn't the forum for this, but a friend of mine has
> > > noticed major, persistent clock drift over time. After several weeks, t
I have sent the following patch three times to you during 2.4.1 prepatch
time and you seem to have missed all of them (Jan 15, 19 and 25). I
hope we can manage that for 2.4.2 and get the known bugs with fixes out
of the ieee1394 subsystem. Finally.
Please, either show some sign of life by reply
1 - 100 of 134 matches
Mail list logo
