Re: xircom_cb problems

2001-06-08 Thread Tom Sightler
Quoting Ion Badulescu <[EMAIL PROTECTED]>: > On Fri, 8 Jun 2001, Tom Sightler wrote: > > > OK, I tried your patch, it did fix the problem where pump wouldn't > > pull an IP address, but I'm still having the problem where my ping > > times go nuts. I've attached an example, it's 100% repeatable

Re: xircom_cb problems

2001-06-08 Thread Ion Badulescu
On Fri, 8 Jun 2001, Tom Sightler wrote: > OK, I tried your patch, it did fix the problem where pump wouldn't > pull an IP address, but I'm still having the problem where my ping > times go nuts. I've attached an example, it's 100% repeatable on my > network at work. It was so bad I couldn't get

Re: xircom_cb problems

2001-06-08 Thread Arjan van de Ven
Tom Sightler wrote: > > Whoops!! Sorry, forgot the attachment. > > > > [root@iso-2146-l1 ttsig]# ping 10.10.4.254 > PING 10.10.4.254 (10.10.4.254) from 10.10.4.33 : 56(84) bytes of data. > 64 bytes from 10.10.4.254: icmp

Re: xircom_cb problems

2001-06-08 Thread Tom Sightler
Whoops!! Sorry, forgot the attachment. Thanks, Tom > Both of these are slow, actually. I'm getting 7.5-8MB/s when receiving > from a 100Mbit box (tulip or starfire, doesn't seem to matter). > Transmitting is still slow for me, but that is most likely a different > problem -- and I'm looking i

Re: xircom_cb problems

2001-06-08 Thread Tom Sightler
> Both of these are slow, actually. I'm getting 7.5-8MB/s when receiving > from a 100Mbit box (tulip or starfire, doesn't seem to matter). > Transmitting is still slow for me, but that is most likely a different > problem -- and I'm looking into it. Yeah, I knew they were both slow, but at leas

Re: xircom_cb problems

2001-06-07 Thread Ion Badulescu
On Thu, 7 Jun 2001, Tom Sightler wrote: > Transferring files between the eepro100 machine running 2.4.2-ac11 and my > laptop produced a result of 2.24MB/s for sending and 2.13MB/s recieving the > file. > > Transfering files between the Alteon Gigabit machine running 2.2.19 and my > laptop res

Re: xircom_cb problems

2001-06-07 Thread Tom Sightler
Quoting Ion Badulescu <[EMAIL PROTECTED]>: > > 2.4.4-ac11 -- mostly works fine -- minor problems awaking from sleep > > Can you run some performance testing with this driver, though? The > speed > of ftp transfers in both directions would be a good measure. The > reason > I'm asking is because w

Re: xircom_cb problems

2001-06-07 Thread Ion Badulescu
On Wed, 6 Jun 2001, Tom Sightler wrote: > At home where I have a 10Mb half-duplex hub connection all of the drivers work > properly. All right, that's expected. > At work where I have a 10/100Mb full-duplex switch connection the drivers work > exactly as I described before: > > 2.4.4-ac11 -- m

xircom_cb problems

2001-06-06 Thread Tom Sightler
> The patch does only one thing: it instructs the card not to negotiate > full-duplex modes, because (for undocumented and yet unexplained > reasons) > full-duplex modes don't work well on this card. > > If you had problems before, then their cause is most likely elsewhere. > 1-second ping time