On Fri, Jun 07, 2013 at 09:28:32AM +0200, Hector Palacios wrote:
> I wasn't sure that everybody involved agreed with the patch.
> @Juergen, would the patch break your platform?
> Additionally, the guys from Crystalfontz didn't comment on it, but
> their platform is also using a 18bit data bus width
Hi Hector,
On 07.06.2013 09:28, Hector Palacios wrote:
> On 06/07/2013 09:21 AM, maxime.rip...@free-electrons.com wrote:
>> Hi Hector,
>>
>> On Fri, May 24, 2013 at 03:33:19PM +0200, Juergen Beisert wrote:
>>> Someone told me, Qt5 cannot handle this special RGB666 mode (even not the
>>> def_rgb666
Hi Maxime,
On 06/07/2013 09:21 AM, maxime.rip...@free-electrons.com wrote:
Hi Hector,
On Fri, May 24, 2013 at 03:33:19PM +0200, Juergen Beisert wrote:
Someone told me, Qt5 cannot handle this special RGB666 mode (even not the
def_rgb666_shift memory layout mentioned above). My test are based on
Hi Hector,
On Fri, May 24, 2013 at 03:33:19PM +0200, Juergen Beisert wrote:
> Someone told me, Qt5 cannot handle this special RGB666 mode (even not the
> def_rgb666_shift memory layout mentioned above). My test are based on Qt4.
> Qt5 needs a regular RGB888 mode, which should silently be convert
Hi Hector,
Juergen Beisert wrote:
> Hector Palacios wrote:
> > On 05/24/2013 12:28 PM, Juergen Beisert wrote:
> > > Hector Palacios wrote:
> > >> On 05/23/2013 03:31 PM, Juergen Beisert wrote:
> > >>> maxime.rip...@free-electrons.com wrote:
> > On Thu, May 23, 2013 at 01:55:28PM +0200, Hector
Hector Palacios wrote:
> Hi Juergen,
>
> On 05/24/2013 12:28 PM, Juergen Beisert wrote:
> > Hector Palacios wrote:
> >> Hi Juergen,
> >>
> >> On 05/23/2013 03:31 PM, Juergen Beisert wrote:
> >>> Hi Maxime,
> >>>
> >>> maxime.rip...@free-electrons.com wrote:
> On Thu, May 23, 2013 at 01:55:28PM
Hi Juergen,
On 05/24/2013 12:28 PM, Juergen Beisert wrote:
Hector Palacios wrote:
Hi Juergen,
On 05/23/2013 03:31 PM, Juergen Beisert wrote:
Hi Maxime,
maxime.rip...@free-electrons.com wrote:
On Thu, May 23, 2013 at 01:55:28PM +0200, Hector Palacios wrote:
I'm using an i.MX28 based board w
Hector Palacios wrote:
> Hi Juergen,
>
> On 05/23/2013 03:31 PM, Juergen Beisert wrote:
> > Hi Maxime,
> >
> > maxime.rip...@free-electrons.com wrote:
> >> On Thu, May 23, 2013 at 01:55:28PM +0200, Hector Palacios wrote:
> >>> I'm using an i.MX28 based board with lcd connected with 18bits data
> >>
Hi Juergen,
On Thu, May 23, 2013 at 03:31:31PM +0200, Juergen Beisert wrote:
> Hi Maxime,
>
> maxime.rip...@free-electrons.com wrote:
> > On Thu, May 23, 2013 at 01:55:28PM +0200, Hector Palacios wrote:
> > > I'm using an i.MX28 based board with lcd connected with 18bits data bus.
> > > My platfo
Hi Juergen,
On 05/23/2013 03:31 PM, Juergen Beisert wrote:
Hi Maxime,
maxime.rip...@free-electrons.com wrote:
On Thu, May 23, 2013 at 01:55:28PM +0200, Hector Palacios wrote:
I'm using an i.MX28 based board with lcd connected with 18bits data bus.
My platform uses 32 bits per pixel:
Hi Maxime,
maxime.rip...@free-electrons.com wrote:
> On Thu, May 23, 2013 at 01:55:28PM +0200, Hector Palacios wrote:
> > I'm using an i.MX28 based board with lcd connected with 18bits data bus.
> > My platform uses 32 bits per pixel:
> >
> > mxsfb_pdata.default_bpp = 32;
> > mxsfb_pdata.l
Hi Hector,
On Thu, May 23, 2013 at 01:55:28PM +0200, Hector Palacios wrote:
> Hello,
>
> I'm using an i.MX28 based board with lcd connected with 18bits data bus.
> My platform uses 32 bits per pixel:
>
> mxsfb_pdata.default_bpp = 32;
> mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
>
>
Hello,
I'm using an i.MX28 based board with lcd connected with 18bits data bus.
My platform uses 32 bits per pixel:
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
With these settings the mxsfb.c driver sets flag DATA_FORMAT_24_BIT at HW_LCDIF_CTRL
reg
13 matches
Mail list logo
