> Hi,
>
> I had the same problem with 2.4.3-pre6 (also with the 3c905C). Alle
> problems were gone with 2.4.4, so I stopped bothering. Hope this
> helps...
Hi,
as I wrote in previous emails, I tried kernel 2.2.16, 2.2.19 and 2.4.x
series (means 2.4.1, 2.4.3, 2.4.4) and still this error. So, I
Robert Vojta wrote:
>
> Hi,
> I have this card in intranet server and I'm very confused about very often
> message in log like this:
>
> eth0: Transmit error, Tx status register 82.
> Flags; bus-master 1, dirty 20979238(6) current 20979242(10)
> Transmit list 1f659290 vs. df659260.
> 0:
> mm.. It _should_ autonegotiate. Perhaps the device at
> the other end is old or not very good.
Hi,
it should but do not autonegotiating. All computers are connected to switch
CentreCOM FH716SW and there are several types of cards on this computers
like 3COM Tornado, 8139 chip, NE2000, etc.
Robert Vojta wrote:
>
> > This is a `transamit reclaim' error. It is almost always
> > caused by this host being in half-duplex mode, and another
> > host on the network being in full-duplex mode.
>
> Hi,
> I tried to force this to be in fullduplex mode by options=0x204 (0x200 + 0x4)
> and it
> This is a `transamit reclaim' error. It is almost always
> caused by this host being in half-duplex mode, and another
> host on the network being in full-duplex mode.
Hi,
I tried to force this to be in fullduplex mode by options=0x204 (0x200 + 0x4)
and it works fine now. Please, can you send
Robert Vojta wrote:
>
> Hi,
> I have this card in intranet server and I'm very confused about very often
> message in log like this:
>
> eth0: Transmit error, Tx status register 82.
This is a `transamit reclaim' error. It is almost always
caused by this host being in half-duplex mode, and an
6 matches
Mail list logo
