Francois Romieu wrote:
> Bram <[EMAIL PROTECTED]> :
> [...]
> > The device now works! But, it still comes up as eth2 instead of eth0,
> > even though it's first detected as eth0. There are no other network
>
> Check the udev rules and/or your init scripts ?
>
You're right, it's a udev script assi
Bram <[EMAIL PROTECTED]> :
[...]
> The device now works! But, it still comes up as eth2 instead of eth0,
> even though it's first detected as eth0. There are no other network
Check the udev rules and/or your init scripts ?
--
Ueimor
-
To unsubscribe from this list: send the line "unsubscribe lin
> Please try the patch below on top of 2.6.23-rc2 ?
>
Ok, I did that.
The device now works! But, it still comes up as eth2 instead of eth0,
even though it's first detected as eth0. There are no other network
interfaces according to ifconfig -a.
I've attached the entire dmesg, which ends with me
Bram <[EMAIL PROTECTED]> :
[...]
> The router attached to it indicates a 100mbit link. But that's about it.
> I cannot get any data over it. I can manually configure it to have an IP
> address and netmask, but it won't see anything on the local net. DHCP
> doesn't work either. Nothing out of the or
Hello,
On my system running linux kernel 2.6.21.5, I can't get my ethernet card
to work. When loading the r8169 module, it will claim to be detected as
eth0, but it will show up as eth2 in ifconfig. There are no eth0 or eth1
devices though. It doesn't work as eth2 either.
The router attached to
5 matches
Mail list logo
