Hi Andre,
On Wed, Nov 29, 2000 at 10:25:45PM -0800, Andre Hedrick wrote:
> If you want to run it under PIO mode and not do DMAing then it will work.
> Also it goes for any device that does ATAPI DMA and not ATA DMA.
> There is a difference!
Could you work out this a little bit to make ot more cl
On Wed, 29 Nov 2000, Damacus Porteng wrote:
> Andre:
>
> Is that to say that I'd experience this problem with any EIDE CDRW used on one
> of the HPT366 channels, or is it to say that only several CDRWs aren't
> supported under this chipset?
If you want to run it under PIO mode and not do DMAing
gt;protocol="application/pgp-signature"; boundary="tmoQ0UElFV5VgXgH"
>Subject: Re: IDE-SCSI/HPT366 Problem
>
>On Wed, Nov 29, 2000 at 01:06:16PM -0600, --Damacus Porteng-- wrote:
>> Problem:
>> The problem lies with using my EIDE CDRW - I set it up pr
Andre:
Is that to say that I'd experience this problem with any EIDE CDRW used on one
of the HPT366 channels, or is it to say that only several CDRWs aren't
supported under this chipset?
Also, in regards to Kurt, I wasn't running the CDRW on the same channel as the
source.
Intel PIIX4
On Wed, 29 Nov 2000, Kurt Garloff wrote:
> Strange. If you read data from the harddisk on an IDE channel and write it
> (with cdrecord) to some CDRW on the same IDE channel, you have to expect
> trouble: As with IDE there is no disconnect from the bus (as opposed to
> SCSI), you risk buffer under
On Wed, 29 Nov 2000, Kurt Garloff wrote:
>
> On Wed, Nov 29, 2000 at 01:06:16PM -0600, --Damacus Porteng-- wrote:
> > Problem:
> > The problem lies with using my EIDE CDRW - I set it up properly using
> > IDE-SCSI. I can use my mp3tocdda shell script to encode mp3s to CD
> > (uses cd
Nope,
I have yet to enable ATAPI-DMA because of the nature of the hooks.
On Wed, 29 Nov 2000, --Damacus Porteng-- wrote:
> LK Prodigies:
>
> This problem is current on the Linux-2.4.0-test11 kernel. Please tell me if
> this has already been resolved - I am new to the list.
>
> Here is my s
On Wed, Nov 29, 2000 at 01:06:16PM -0600, --Damacus Porteng-- wrote:
> Problem:
> The problem lies with using my EIDE CDRW - I set it up properly using
> IDE-SCSI. I can use my mp3tocdda shell script to encode mp3s to CD
> (uses cdrecord as well) on the fly using either drive, h
LK Prodigies:
This problem is current on the Linux-2.4.0-test11 kernel. Please tell me if
this has already been resolved - I am new to the list.
Here is my setup:
Motherboard: Soyo 6BA+IV (built-in PIIX4 and HPT366 IDE controllers)
CDRWs: Yamaha 4416S (SCSI) & Yamaha 8424E (EIDE
9 matches
Mail list logo
