On Wed, Dec 14, 2016 at 04:23:58PM +0700, Tin Huynh wrote:
> ACPI always sets Tx/Rx FIFO to 32. This configuration will
> cause problem if the IP core supports a FIFO size of less than 32.
> The driver should read the FIFO size from the IP and select the smaller
> one of the two.
>
> Signed-off-by
On Wed, 2016-12-14 at 16:23 +0700, Tin Huynh wrote:
> ACPI always sets Tx/Rx FIFO to 32. This configuration will
> cause problem if the IP core supports a FIFO size of less than 32.
> The driver should read the FIFO size from the IP and select the
> smaller
> one of the two.
>
> Signed-off-by: Tin
On Wed, Dec 14, 2016 at 04:23:58PM +0700, Tin Huynh wrote:
> ACPI always sets Tx/Rx FIFO to 32. This configuration will
> cause problem if the IP core supports a FIFO size of less than 32.
> The driver should read the FIFO size from the IP and select the smaller
> one of the two.
>
> Signed-off-by
On 12/14/2016 11:23 AM, Tin Huynh wrote:
ACPI always sets Tx/Rx FIFO to 32. This configuration will
cause problem if the IP core supports a FIFO size of less than 32.
The driver should read the FIFO size from the IP and select the smaller
one of the two.
Signed-off-by: Tin Huynh
---
drivers/i
ACPI always sets Tx/Rx FIFO to 32. This configuration will
cause problem if the IP core supports a FIFO size of less than 32.
The driver should read the FIFO size from the IP and select the smaller
one of the two.
Signed-off-by: Tin Huynh
---
drivers/i2c/busses/i2c-designware-platdrv.c | 31 +
5 matches
Mail list logo
