Hello!
On 4/20/21 5:04 PM, Thomas Bogendoerfer wrote:
> Add OF support for switching RB532 do device tree possible.
I couldnb't parse that. :-)
> By removing
> the not needed asm/mach-rc32434/rb.h include the driver could be
> compile tested now.
I think it's a separte issue worth its own
Hello!
On 17.04.2021 16:23, Adam Ford wrote:
The call to clk_disable_unprepare() can happen before priv is
initialized.
Mhm, how's that? :-/
This means moving clk_disable_unprepare out of
out_release into a new label.
Fixes: 8ef7adc6beb2("net: ethernet: ravb: Enable optional refclk")
Si
Hello!
On 19.04.2021 8:51, zhaoxiao wrote:
In preparation for mips supporting ftrace built on other compiler
options, let's have the mips Makefiles remove the $(CC_FLAGS_FTRACE)
flags, whatever these may be, rather than assuming '-pg'.
But your patch is adding 'em, not removing?
Signed-
On 16.04.2021 16:35, Thomas Bogendoerfer wrote:
On Fri, Apr 16, 2021 at 12:29:46PM +0300, Sergei Shtylyov wrote:
On 16.04.2021 11:52, Thomas Bogendoerfer wrote:
Add device tree bindings for ethernet controller integrated into
IDT 79RC3243x SoCs.
Signed-off-by: Thomas Bogendoerfer
On 16.04.2021 11:08, Malte Deiseroth wrote:
Correct missing space error ceckpatch.pl is complaining about.
It's called checkpatch.pl. :-)
Signed-off-by: Malte Deiseroth
[...]
MBR, Sergei
On 16.04.2021 11:52, Thomas Bogendoerfer wrote:
Add device tree bindings for ethernet controller integrated into
IDT 79RC3243x SoCs.
Signed-off-by: Thomas Bogendoerfer
---
.../bindings/net/idt,3243x-emac.yaml | 74 +++
1 file changed, 74 insertions(+)
create mode
Hello!
On 16.04.2021 11:47, Thomas Bogendoerfer wrote:
If there is no mac address passed via platform data try to get it via > device
tree and fall back to a random mac address, if all fail.
Signed-off-by: Thomas Bogendoerfer
---
drivers/net/ethernet/korina.c | 24 ++--
On 15.04.2021 8:41, Artur Petrosyan wrote:
When dwc2 core is in hibernation mode loading
driver again causes driver fail. Because in
that mode registers are not accessible.
In order to exit from hibernation checking
dwc2 core power saving state in "dwc2_driver_remove()"
function. If core is in
On 15.04.2021 8:40, Artur Petrosyan wrote:
When core is in hibernation state and an external
hub is connected, upper layer sends URB enqueue request,
which results in port reset issue.
- Added exit from hibernation state to avoid port
reset issue and process upper layer request properly.
Signe
On 13.04.2021 10:37, Artur Petrosyan wrote:
If not hibernation nor partial power down are supported,
s/not/neither/?
port resume is done using the clock gating programming flow.
Adds a new flow of exiting clock gating when PC is
resumed.
Signed-off-by: Artur Petrosyan
---
Changes in
On 13.04.2021 10:37, Artur Petrosyan wrote:
If not hibernation nor partial power down are supported,
s/not/neither/?
clock gating is used to save power.
Adds a new flow of entering clock gating when PC is
suspended.
Signed-off-by: Artur Petrosyan
---
Changes in v2:
- None
driver
On 13.04.2021 10:16, Artur Petrosyan wrote:
If core doesn't support hibernation or partial power
down power saving options, power can still be saved
using clock gating on all the clocks.
- Added entering clock gating state from USB_SUSPEND
interrupt.
Signed-off-by: Artur Petrosyan
Acked-by
Hello!
On 13.04.2021 10:17, Artur Petrosyan wrote:
Updates the implementation of entering clock gating mode
when core receives port suspend.
Instead of setting the required bit fields of the registers
inline, called the "dwc2_host_enter_clock_gating()" function.
Signed-off-by: Artur Petrosyan
On 10.04.2021 2:42, angkery wrote:
From: Junlin Yang
The return from the call to platform_get_irq() is int, it can be
a negative error code, however this is being assigned to an unsigned
int variable 'irq', so making 'irq' an int, and change the position to
keep the code format.
Fixes coccich
On 10.04.2021 2:38, angkery wrote:
On Fri, 9 Apr 2021 20:02:56 +0300
Sergei Shtylyov wrote:
On 4/9/21 7:49 PM, Sergei Shtylyov wrote:
From: Junlin Yang
The return from the call to platform_get_irq() is int, it can be
a negative error code, however this is being assigned to an
unsigned int
On 4/9/21 7:49 PM, Sergei Shtylyov wrote:
>> From: Junlin Yang
>>
>> The return from the call to platform_get_irq() is int, it can be
>> a negative error code, however this is being assigned to an unsigned
>> int variable 'irq', so making 'irq' a
On 4/9/21 4:54 PM, angkery wrote:
> From: Junlin Yang
>
> The return from the call to platform_get_irq() is int, it can be
> a negative error code, however this is being assigned to an unsigned
> int variable 'irq', so making 'irq' an int, and change the position to
> keep the code format.
>
>
Hello!
On 09.04.2021 0:48, Thomas Bogendoerfer wrote:
Cavium Octeon has it's own memcpy implementation and also need the change
Its. :-)
done in commit 04324f44cb69 ("MIPS: Remove get_fs/set_fs").
Fixes: 04324f44cb69 ("MIPS: Remove get_fs/set_fs")
Reported-by: kernel test robot
Signed-
On 3/26/21 5:38 PM, Christoph Hellwig wrote:
> Just call compat_do_execve instead.
compat_do_execveat(), maybe?
> Signed-off-by: Christoph Hellwig
> ---
> fs/exec.c | 17 +
> 1 file changed, 1 insertion(+), 16 deletions(-)
>
> diff --git a/fs/exec.c b/fs/exec.c
> index b63f
Hello!
On 23.03.2021 22:27, Sandeep Maheswaram wrote:
This patch adds a shutdown callback to USB DWC core driver to ensure that
it is properly shutdown in reboot/shutdown path. This is required
where SMMU address translation is enabled like on SC7180
SoC and few others. If the hardware is still
Hi!
On 23.03.2021 0:11, Andy Shevchenko wrote:
Kernel doc and the content described by it shouldn't be teared apart.
s/teared/torn/?
Otherwise validator is not happy:
.../pch_udc.c:573: warning: expecting prototype for pch_udc_reconnect().
Prototype was for pch_udc_init() instead
Fixe
Hello!
On 23.03.2021 10:02, Chunfeng Yun wrote:
Add support common property usb2-lpm-disable
^ for
Signed-off-by: Chunfeng Yun
[...]
MBR, Sergei
On 22.03.2021 6:13, Chunfeng Yun wrote:
Add support ip-sleep wakeup for mT8192, it's a specific revision,
^ for
and not follow IPM rule.
Following?
Signed-off-by: Chunfeng Yun
---
drivers/usb/host/xhci-mtk.c | 10 ++
1 file changed, 10 insertions(+)
diff --git
Same comments as to the patch #6.
MBR, Sergei
Hello!
On 22.03.2021 6:13, Chunfeng Yun wrote:
Add support ip-sleep wakeup for MT8183, it's similar to MT8173,
^ for
and it's also a specific one, but not follow IPM rule.
Following?
Due to the index 2 already used by many DTS, it's better to keep
it unchanged for backwar
On 18.03.2021 15:44, Adam Ford wrote:
The AVB refererence clock assumes an external clock that runs
reference
automatically. Because the Versaclock is wired to provide the
AVB refclock, the device tree needs to reference it in order for the
driver to start the clock.
Signed-off-by: Adam Fo
clock, there is no
> clock-names list either.
>
> Update bindings to add the additional optional clock, and explicitly
> name both of them.
>
> Signed-off-by: Adam Ford
> Reviewed-by: Geert Uytterhoeven
> Acked-by: Rob Herring
Reviewed-by: Sergei Shtylyov
[...]
PS: S
On 3/18/21 7:57 AM, Christoph Hellwig wrote:
> Various malta defconfigs enable CONFIG_IDE for the tc86c001 ide driver,
> hich is a Toshiba plug in card that does not make much sense to use on
^ which is for
> bigsur platforms. For all other ATA cards libata support is already
^ Malta.
> ena
Hi!
On 3/18/21 7:57 AM, Christoph Hellwig wrote:
> bigsur_defconfig enables CONFIG_IDE for the tc86c001 ide driver, which
> is a Toshiba plug in card that does not make much sense to use on bigsur
^ for
Else that doesn't make much sense. :-)
> platforms. For all other ATA cards libata s
On 17.03.2021 12:56, Krzysztof Kozlowski wrote:
[...]
The Ralink MIPS platform does not use Common Clock Framework and does
not define certain clock operations leading to compile test failures:
/usr/bin/mips-linux-gnu-ld: drivers/usb/phy/phy-tegra-usb.o: in function
`tegra_usb_phy_init':
On 17.03.2021 10:15, Tiezhu Yang wrote:
After commit 0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}() only to
archs where they work"), bpf_probe_read{, str}() functions were not longer
No longer.
available on MIPS, so there exists some errors when running bpf program:
Exist.
r
Hello!
On 16.03.2021 20:57, Krzysztof Kozlowski wrote:
The Ralink MIPS platform does not use Common Clock Framework and does
not define certain clock operations leading to compile test failures:
/usr/bin/mips-linux-gnu-ld: drivers/usb/phy/phy-tegra-usb.o: in function
`tegra_usb_phy_init'
Hello!
On 15.03.2021 5:39, Wang Qing wrote:
platform_get_irq() has already checked and printed the return value,
the printing here is nothing special, and should corrected to < 0.
Also, thhe return value should return a real error.
The.
It's a bad idea to mix the fix and cleanup in one
Hello again. :-)
Now, 2 patches to the different files shouldn't have and identical subject!
And the patch
subject should reflect the exact patch locus, e.g. "sata_highbank: delete
redundant printing
of return value".
On 3/13/21 10:47 AM, Wang Qing wrote:
> platform_get_irq() has already ch
Hello!
The patch subject should reflect the exact patch locus, e.g. "ata:
libahci_platform:
delete redundant printing of return value".
On 3/13/21 10:46 AM, Wang Qing wrote:
> platform_get_irq() has already checked and printed the return value,
> the printing here is nothing special, it is
Hello!
For the future, the driver name should go instead (or after) the "ata: ",
like this:
"pata_ns87415: Trivial spelling fixes".
MBR, Sergei
Hello!
On 10.03.2021 10:56, Qing Zhang wrote:
Get the fixed-clock from the CPU0 node of the device tree.
Signed-off-by: Jiaxun Yang
Signed-off-by: Qing Zhang
Tested-by: Ming Wang
---
v3-v4: Standard submission of information
Add return after error
arch/mips/loongson64/time.c | 2
Hello!
On 10.03.2021 5:26, zhangqing wrote:
[...]
+ if (of_device_is_compatible(node, "loongson,liointc-2.0")) {
+ base = liointc_get_reg_byname(node, "main");
+ if (!base) {
+ err = -ENODEV;
+ goto out_free_priv;
+ }
+ for (i = 0; i < LIOINT
Hello!
On 08.03.2021 9:21, Yang Li wrote:
This function always return '0' and no callers use the return value.
Returns.
So make it a void function.
This eliminates the following coccicheck warning:
./drivers/usb/typec/tcpm/tcpm.c:778:5-8: Unneeded variable: "ret".
Return "0" on line 794
Hello!
On 05.03.2021 12:02, Chunfeng Yun wrote:
Tune the boundary for FS/LS ESIT due to CS:
For ISOC out-ep, the controller starts transfer data after
the first SS; for others, the data is already transfered
Transferred.
before the last CS.
Signed-off-by: Chunfeng Yun
---
drivers/usb
Hello!
On 01.03.2021 9:33, Wang Qing wrote:
The copy_to_user() function returns the number of bytes remaining to be
copied, but we want to return -EFAULT if the copy doesn't complete.
Then 'err' is hardly a good name for that variable. :-)
Signed-off-by: Wang Qing
---
arch/mips/sibyt
Hello!
On 22.02.2021 18:12, Romain Perier wrote:
The strlcpy() reads the entire source buffer first, it is dangerous if
the source buffer lenght is unbounded or possibility non NULL-terminated.
Length. Possibly?
It can lead to linear read overflows, crashes, etc...
As recommended in the
Hello!
On 27.02.2021 1:49, Laurent Pinchart wrote:
From: Laurent Pinchart
The new function checks if the list_head prev and next pointers are
NULL, in order to see if a list_head that has been zeroed when allocated
has been initialized with INIT_LIST_HEAD() or added to a list.
So zeroed
Hello!
On 26.02.2021 1:51, Fabrizio Castro wrote:
Document bindings for R-Car DAB hardware accelerator, currently
found on the r8a77990 SoC (a.k.a. R-Car E3) and on the r8a77965
SoC (a.k.a. R-Car M3-N).
Signed-off-by: Fabrizio Castro
---
.../devicetree/bindings/misc/renesas,dab.yaml | 75 ++
Hello!
On 15.02.2021 5:38, Daehwan Jung wrote:
It seems pm_runtime_put calls runtime_idle callback not runtime_suspend
callback.
It's better to use pm_runtime_put_sync_suspend to allow DWC3 runtime suspend.
Signed-off-by: Daehwan Jung
---
drivers/usb/dwc3/gadget.c | 2 +-
1 file changed,
Hello!
On 04.02.2021 10:17, Xu Wang wrote:
Remove casting the values returned by dma_alloc_coherent.
I'm not seeing any casting, I'm seeing a trailing space removed.
Signed-off-by: Xu Wang
---
drivers/usb/host/ehci-mem.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --g
Hello!
On 28.01.2021 3:50, Masahiro Yamada wrote:
Building kernel/sys_ni.c with W=1 omits tons of -Wmissing-prototypes
Emits?
warnings.
$ make W=1 kernel/sys_ni.o
[ snip ]
CC kernel/sys_ni.o
In file included from kernel/sys_ni.c:10:
./arch/x86/include/asm/syscall_wrapper.h:83
On 28.01.2021 10:59, Sergei Shtylyov wrote:
[...]
Building kernel/sys_ni.c with W=1 omits tons of -Wmissing-prototypes
Emits?
warnings.
$ make W=1 kernel/sys_ni.o
[ snip ]
CC kernel/sys_ni.o
In file included from kernel/sys_ni.c:10:
./arch/x86/include/asm/syscall_wrapper.h
On 1/23/21 5:24 PM, Paul Cercueil wrote:
> musb_queue_resume_work() would call the provided callback if the runtime
> PM status was 'active'. Otherwise, it would enqueue the request if the
> hardware was still suspended (musb->is_runtime_suspended is true).
>
> This causes a race with the runtime
_put_sync(), as
> there is no reason to do a synchronous power down.
>
> Fixes: 7fa2955ff70ce453 ("sh_eth: Fix sleeping function called from invalid
> context")
> Signed-off-by: Geert Uytterhoeven
Reviewed-by: Sergei Shtylyov
[...]
MBR, Sergei
Hello!
On 15.01.2021 23:19, Adam Ford wrote:
For devices that use a programmable clock for the avb reference clock,
AVB.
the driver may need to enable them. Add code to find the optional clock
and enable it when available.
Signed-off-by: Adam Ford
[...]
diff --git a/drivers/net/ethe
On 16.01.2021 12:06, Chunfeng Yun wrote:
Harmonize node names, compatibles and properties.
Signed-off-by: Chunfeng Yun
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 9 -
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
b/arch/a
Hello!
On 16.01.2021 12:06, Chunfeng Yun wrote:
This is used to fix dtbs_check warning
Signed-off-by: Chunfeng Yun
---
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 9 +
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
b/arch/arm6
On 1/12/21 2:15 PM, Sergei Shtylyov wrote:
[...]
>> From: Menglong Dong
>>
>> Coccinelle reports a redundant error print in rb532_pata_driver_probe.
>> As 'platform_get_irq' already prints the error message, error print
>> here is redundant and can be rem
Hello!
On 13.01.2021 13:57, Tiezhu Yang wrote:
When make M=samples/bpf on the Loongson 3A3000 platform which
belongs to MIPS arch, there exists many similar build errors
about 'asm/rwonce.h' file not found, so include it only under
CONFIG_ARM64 and CONFIG_ALPHA due to it exists only in arm64
an
Hello!
On 13.01.2021 17:04, Menglong Dong wrote:
[...]
irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
- dev_err(&pdev->dev, "no IRQ resource found\n");
+ if (irq <= 0)
return -ENOENT;
This still beaks the probe deferral. :-(
But that's ano
Hello!
On 13.01.2021 21:55, Jacopo Mondi wrote:
Document the 'reverse-channel-microvolt' vendor property in the
Where is "maxim,"?
bindings document of the max9286 driver.
The newly introduced property allows to specifying the initial
Specify?
configuration of the GMSL reverse co
Hello!
On 1/12/21 5:36 AM, menglong8.d...@gmail.com wrote:
> From: Menglong Dong
>
> Coccinelle reports a redundant error print in rb532_pata_driver_probe.
> As 'platform_get_irq' already prints the error message, error print
> here is redundant and can be removed.
>
> Signed-off-by: Menglong
Hello!
On 11.01.2021 7:40, Davidlohr Bueso wrote:
Tasklets have long been deprecated as being too heavy on the system
by running in irq context - and this is not a performance critical
path. If a higher priority process wants to run, it must wait for
the tasklet to finish before doing so.
c67x
On 12/30/20 5:57 PM, Lad Prabhakar wrote:
> Replace C++ style comment with C style.
Note that the switch to // was made following the SPI maintainer's request...
> Signed-off-by: Lad Prabhakar
[...]
MBR, Sergei
On 29.12.2020 0:31, Adam Ford wrote:
The bindings have been updated to support two clocks, but the
original clock now requires the name fck. Add a clock-names
list in the device tree with fck in it.
Hopefully this won't break RPM...
Signed-off-by: Adam Ford
[...]
MBR, Sergei
On 29.12.2020 0:31, Adam Ford wrote:
The bindings have been updated to support two clocks, but the
original clock now requires the name fck to distinguish it
from the other.
Signed-off-by: Adam Ford
Reviewed-by: Sergei Shtylyov
MBR, Sergei
Hello!
On 29.12.2020 0:31, Adam Ford wrote:
The AVB driver assumes there is an external clock, but it could
be driven by an external clock.
Driver can be driven by external clock? :-)
In order to enable a programmable
clock, it needs to be added to the clocks list and enabled in the
dri
On 12/25/20 1:35 PM, Qing Zhang wrote:
> Switch the DT binding to a YAML schema to enable the DT validation.
>
> Signed-off-by: Qing Zhang
> ---
>
> v4: fix warnings/errors about running 'make dt_binding_check'
>
> ---
> .../devicetree/bindings/spi/loongson,spi-ls7a.yaml | 46
> +
On 24.12.2020 20:04, Adam Ford wrote:
The SoC was expecting two clock sources with different frequencies.
One to support 44.1KHz and one to support 48KHz. With the newly added
ability to configure the programmably clock, configure both clocks.
Programmable.
Assign the rcar-sound clocks t
On 24.12.2020 20:04, Adam Ford wrote:
The programmable versaclock is used for the usb_extal reference clock for
the EHCI driver instead of a fixed-clock. Because the versaclock needs to
be enabled, the clock reference needs to be added to the clocks list.
For the USB3 Phy, the perferred clock
On 24.12.2020 20:05, Adam Ford wrote:
eacon EmebeddedWorks is introducing a new kit based on the
Beacon?
RZ/G2H SoC from Renesas.
The SOM supports eMMC, WiFi and Bluetooth, along with a Cat-M1
cellular radio.
The Baseboard has Ethernet, USB, HDMI, stereo audio in and out,
along with a v
Hello!
On 24.12.2020 10:04, Yoshihiro Shimoda wrote:
Use dev_regmap_add_irq_chip() to simplify the code.
devm_?
Signed-off-by: Yoshihiro Shimoda
Acked-for-MFD-by: Lee Jones
Reviewed-by: Matti Vaittinen
Reviewed-by: Geert Uytterhoeven
---
drivers/mfd/bd9571mwv.c | 27 ++-
On 22.12.2020 14:22, Yoshihiro Shimoda wrote:
Add support for BD9574MWF which is silimar chip with BD9571MWV.
Similar (again)? :-)
Note that we don't support voltage rails VD{09,18,25,33} by this
driver on BD9574. The VD09 voltage could be read from PMIC but that
is not supported by this
Hello!
On 22.12.2020 14:22, Yoshihiro Shimoda wrote:
Add support for BD9574MWF which is silimar chip with BD9571MWV.
Similar? :-)
Note that BD9574MWF has additional features "RECOV_GPOUT",
"FREQSEL" and "RTC_IN", but supports GPIO function only.
Signed-off-by: Yoshihiro Shimoda
Reviewe
Hello!
On 15.12.2020 23:21, Dmitry Osipenko wrote:
The PHY hardware needs the delay of 2ms after power up, otherwise initial
interrupt may be lost if USB controller is accessed before PHY is settled
down. Previously this issue was masked by implicit delays, but now it pops
up after squashing th
Hello!
On 12.12.2020 19:56, Adam Ford wrote:
The SoC expects the txv_refclk is provided, but if it is provided
by a programmable clock, there needs to be a way to get and enable
this clock to operate. It needs to be optional since it's only
necessary for those with programmable clocks.
Signed
On 12/10/20 6:01 PM, Greg Kroah-Hartman wrote:
[...]
>>> From: Min Guo
>>>
>>> Remove unused 'devctl' variable to fix compile warnings:
>>>
>>> drivers/usb/musb/musbhsdma.c: In function 'dma_controller_irq':
>>> drivers/usb/musb/musbhsdma.c:324:8: warning: variable 'devctl' set
>>>
On 12/8/20 1:47 PM, zhangqing wrote:
>>> Add spi-ls7a binding documentation.
>>>
>>> Signed-off-by: Qing Zhang
>>> ---
>>> Documentation/devicetree/bindings/spi/spi-ls7a.txt | 31
>>> ++
>>> 1 file changed, 31 insertions(+)
>>> create mode 100644 Documentation/devicetree
Hello!
On 08.12.2020 10:44, Qing Zhang wrote:
Add spi-ls7a binding documentation.
Signed-off-by: Qing Zhang
---
Documentation/devicetree/bindings/spi/spi-ls7a.txt | 31 ++
1 file changed, 31 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/spi-ls
On 11/26/20 10:11 PM, Lad Prabhakar wrote:
> This patch series fixes trivial issues in RPC-IF driver.
>
> Changes for v2:
> * Balanced PM in rpcif_disable_rpm
> * Fixed typo in patch 4/5
> * Dropped C++ style fixes patch
The part that fixed the comment style wasd good, you should\ve kept it..
ytterhoeven
Reported by reported? :-)
> Signed-off-by: Lad Prabhakar
> Cc: sta...@vger.kernel.org
Reviewed-by: Sergei Shtylyov
[...]
MBR, Sergei
d Prabhakar
> Cc: sta...@vger.kernel.org
Reviewed-by: Sergei Shtylyov
[...]
MBR, Sergei
On 24.11.2020 14:25, Lad Prabhakar wrote:
Renesas RPC-IF driver is licensed under GPL2.0, to be in sync export the
symbols as GPL.
Didn't know there's a connection...
Suggested-by: Pavel Machek
Signed-off-by: Lad Prabhakar
Reviewed-by: Sergei Shtylyov
[...]
MBR, Sergei
ned-off-by: Lad Prabhakar
Cc: sta...@vger.kernel.org
Reviewed-by: Sergei Shtylyov
MBR, Sergei
On 11/24/20 2:25 PM, Lad Prabhakar wrote:
> Replace C++ style comment with C style.
Thanks, I've overlooked this, and the header files should use C style
comment,
not C++.
> While at it also replace the tab with a space between struct and
> struct name.
No connection between these 2 cha
On 11/24/20 2:34 PM, Lad, Prabhakar wrote:
[...]
>> This patch series fixes trivial issues in RPC-IF driver.
>>
>> Cheers,
>> Prabhakar
>>
>> Lad Prabhakar (5):
>> memory: renesas-rpc-if: Return correct value to the caller of
>> rpcif_manual_xfer()
>> memory: renesas-rpc-if: Make rpcif_ena
Hello!
On 11/24/20 2:25 PM, Lad Prabhakar wrote:
> Define rpcif_enable_rpm() and rpcif_disable_rpm() as static
Not sure why I didn't do it this way myself...
> inline in the header instead of exporting it.
s/it/them/.
> Suggested-by: Pavel Machek
> Signed-off-by: Lad Prabhakar
> ---
>
On 11/24/20 12:13 PM, Sergei Shtylyov wrote:
[...]
>> From: Min Guo
>>
>> Remove unused 'devctl' variable to fix compile warnings:
>>
>> drivers/usb/musb/musbhsdma.c: In function 'dma_controller_irq':
>> drivers/usb/musb/musbhsdma
Hello!
On 24.11.2020 11:49, min@mediatek.com wrote:
From: Min Guo
Remove unused 'devctl' variable to fix compile warnings:
drivers/usb/musb/musbhsdma.c: In function 'dma_controller_irq':
drivers/usb/musb/musbhsdma.c:324:8: warning: variable 'devctl' set
but not used [-Wunu
On 11/20/20 7:15 PM, Jacopo Mondi wrote:
> Fix GPIO enable/disable operations which wrongly read the 0x0f register
> to obtain the current mask of the enabled lines instead of using
> the correct 0x0e register.
>
> Also fix access to bit 0 of the register which is marked as reserved.
>
> Fixes:
Hello!
On 19.11.2020 20:24, Yves-Alexis Perez wrote:
Starting with iOS 14 released in September 2020, connectivity using the
personal hotspot USB tethering function of iOS devices is broken.
Communication between the host and the device (for example ICMP traffic
or DNS resolution using the DNS
Hello!
On 19.11.2020 5:29, Jinyang He wrote:
When CONFIG_RANDOMIZE_BASE is not set, determine_relocation_address()
always returns a constant. It is not friendly to users if the address
cannot be used. Make it can be configured at Kconfig.
Make it configurable?
Signed-off-by: Jinyang He
Hello!
On 18.11.2020 11:56, penghao wrote:
Add a USB_QUIRK_DISCONNECT_SUSPEND quirk for the Lenovo TIO built-in
usb-audio. when A630Z going into S3,the system immediately wakeup 7-8
seconds later by usb-audio disconnect interrupt to avoids the issue.
Seeking a better fix, we've tried a lot of
On 16.11.2020 12:47, Tiezhu Yang wrote:
[...]
Select ARCH_WANT_FRAME_POINTERS to fix the following build error under
CONFIG_DEBUG_ATOMIC_SLEEP:
CC arch/mips/kernel/signal.o
{standard input}: Assembler messages:
{standard input}:1775: Error: Unable to parse register name $fp
scripts/Make
Hello!
On 16.11.2020 8:03, Tiezhu Yang wrote:
Select ARCH_WANT_FRAME_POINTERS to fix the following build error under
CONFIG_DEBUG_ATOMIC_SLEEP:
CC arch/mips/kernel/signal.o
{standard input}: Assembler messages:
{standard input}:1775: Error: Unable to parse register name $fp
scripts/Mak
Hello!
On 11/14/20 4:09 PM, Jiaxun Yang wrote:
> While Gildfish platform is dusted, the RTC driver remains
Goldfish. :-)
> valuable for us.
>
> I'm volunteering to maintain goldfish RTC driver onward.
>
> Signed-off-by: Jiaxun Yang
> Cc: Miodrag Dinic
[...]
MBR, Sergei
On 11/12/20 7:27 PM, Jacopo Mondi wrote:
> Use the newly introduced 'maxim,maxim,initial-reverse-channel-mV'
"maxim," repeated twice.
> property to specify the initial reverse channel amplitude when the
> remote serializers are not pre-programmed with noise immunity threshold
> enabled.
>
>
Hello!
On 11/10/20 6:49 PM, Geert Uytterhoeven wrote:
> Restore alignment of the continuation of the devm_ioremap() call in
It's a plain ioremap() call below, isn't it, :-)
> register_intc_controller().
>
> Fixes: 4bdc0d676a643140 ("remove ioremap_nocache and devm_ioremap_nocache")
> Signed
Hello!
On 04.11.2020 19:41, Necip Fazil Yildiran wrote:
When BCM47XX_SSB is enabled and SSB_PCIHOST is disabled, it results in the
following Kbuild warning:
WARNING: unmet direct dependencies detected for SSB_B43_PCI_BRIDGE
Depends on [n]: SSB [=y] && SSB_PCIHOST [=n]
Selected by [y]:
Hello!
On 27.10.2020 3:03, Sasha Levin wrote:
From: Zejiang Tang
[ Upstream commit 39116103a7345927fa99644d08bc0cc9d45fea6f ]
There exists redundant #ifdef CONFIG_DYNAMIC_FTRACE in ftrace.c, remove it.
Signed-off-by: Zejiang Tang
Reviewed-by: Steven Rostedt (VMware)
Signed-off-by: Thomas
tamp_config eth0
> flags = 0
> tx_type = OFF
> rx_filter = PTP_V2_L2_EVENT
>
> Correct this by converting if-else's to switch.
>
> Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
> Reported-by: Julia Lawall
> Signed-off-by: Andrew Gabbasov
Reviewed-by: Sergei Shtylyov
[...]
MBR, Sergei
Hello!
On 10/19/20 10:32 AM, Andrew Gabbasov wrote:
Sorry for the delay again, I keep forgetting about the mails I' couldn't
reply
quickly. :-|
[...]
>>The patch was set to the "Changes Requested" state -- most probably
>> because of this
>> mail. Though unintentionally, it served to th
Hello!
On 10/18/20 4:47 PM, Dejin Zheng wrote:
> According to Synopsys Programming Guide chapter 2.2 Register Resets,
> it cannot reset the DCTL register by set DCTL.CSFTRST for Core Soft Reset,
s/set/setting/.
> if DWC3 controller as a slave device and stay connected with a usb host,
> then
Hello!
On 10/1/20 10:13 AM, Andrew Gabbasov wrote:
The patch was set to the "Changes Requested" state -- most probably because
of this
mail. Though unintentionally, it served to throttle actions on this patch. I
did only
remember about this patch yesterday... :-)
[...]
>> In the function ra
1 - 100 of 1451 matches
Mail list logo
