3C905B module/builtin lockup on 2.4.6-pre3-5

2001-06-23 Thread Glenn C. Hofmann
wanted to eliminate any possibility that this might be part of the problem. Glenn C. Hofmann # # Automatically generated by make menuconfig: don't edit # CONFIG_X86=y CONFIG_ISA=y # CONFIG_SBUS is not set CONFIG_UID16=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # Loa

Re: 3C905b partial lockup in 2.4.5-pre5 and up to 2.4.6-pre1

2001-06-09 Thread Glenn C. Hofmann
help. If you think of anything else that might be an issue, please let me know. Glenn C. Hofmann Andrew wrote: Date sent: Sun, 10 Jun 2001 11:35:53 +1000 From: Andrew Morton <[EMAIL PROTECTED]> Subject:Re: 3C905b partial lockup in 2.4

Re: 3C905b partial lockup in 2.4.5-pre5 and up to 2.4.6-pre1

2001-06-09 Thread Glenn C. Hofmann
enn C. Hofmann On Sunday, 10 June 2001 Andrew wrote: > "Glenn C. Hofmann" wrote: > > > > I have tried 2.4.5-pre2 up to 2.4.6-pre1 with the same results. > > Everything boots great and I can login fine. When I try to assign > > an IP via DHCP or

3C905b partial lockup in 2.4.5-pre5 and up to 2.4.6-pre1

2001-06-09 Thread Glenn C. Hofmann
e has been resolved and will recompile the newer kernels (AC and Linus flavours) to see if it has cleared up, but wanted to see if maybe there is something else I should look at. I can provide any more information that might help, so please let me know. Thanks in advance. Glenn C. Hofmann - To u

Re: VIA IDE driver status ?

2001-03-31 Thread Glenn C. Hofmann
t; On Sat, Mar 31, 2001 at 12:00:41PM -0600, Glenn C. Hofmann wrote: > > I am not sure if this applies in your case, but I was getting problems > > such as this on my Abit KT7-RAID and had the correct cables, also. One > > day, on a hunch after reading a post from Alan about overclock

Re: VIA IDE driver status ?

2001-03-31 Thread Glenn C. Hofmann
I am not sure if this applies in your case, but I was getting problems such as this on my Abit KT7-RAID and had the correct cables, also. One day, on a hunch after reading a post from Alan about overclocking, I took my Athlon 750 down to 850 from 1.05 GHz and all is working great now. If your ov

Re: Kernel panic: Unable to handle kernel paging request

2000-10-01 Thread Glenn C. Hofmann
I have noticed this behaviour as well with any newer pre 2.4 kernels on a Compaq Proliant 3000 with a Smart2-DH controller and, just recently, with test9-pre7 on my home system. It always happens during high disk activity. The problem I have is that usually it starts scrolling several page

Re: (Fwd) CD-ROM (SCSI and IDE) not mounting disk

2000-09-23 Thread Glenn C. Hofmann
Another interesting thing that I just noticed, I can still play music CD's in either drive. On 23 Sep 2000, at 20:10 Glenn C. Hofmann wrote: > I will try to recompile some older kernels and see where it breaks, but here is the >output in the > logs when I try to mount the

Re: (Fwd) CD-ROM (SCSI and IDE) not mounting disk

2000-09-23 Thread Glenn C. Hofmann
ked. Sep 23 20:06:52 hofmann1 kernel: cdrom: Use count for "/dev/hdd" now 0 On 24 Sep 2000, at 2:43 Jens Axboe wrote: > On Sat, Sep 23 2000, Glenn C. Hofmann wrote: > > As of the more recent kernels (2.4.0-test8,7,6 for sure) both my IDE and > > SCSI CD-ROM drives will

(Fwd) CD-ROM (SCSI and IDE) not mounting disk

2000-09-23 Thread Glenn C. Hofmann
Sorry, the files are attached this time... --- Forwarded message follows --- Date sent: Sun, 24 Sep 2000 00:35:57 + (GMT) From: "Glenn C. Hofmann" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Date sent: Sat

CD-ROM (SCSI and IDE) not mounting disk

2000-09-23 Thread Glenn C. Hofmann
As of the more recent kernels (2.4.0-test8,7,6 for sure) both my IDE and SCSI CD-ROM drives will not mount a disk. They fail and tell me that there is no disk in the drive. I booted into an old 2.0.36 kernel just to make sure it wasn't a strange hardware failure and the CD mounted fine. I