actual speed to detect downshift") is working fine also for this
phy and it's trivial re-using it to restore the downshift
detection on rtl8211f.
Add the phy specific read_status() pointing to the existing
function rtlgen_read_status().
Signed-off-by: Antonio Borneo
Link: https://lore.kernel
ps.
Fixes: 757926247836 ("net: stmmac: add flexible PPS to dwmac 4.10a")
Cc: sta...@vger.kernel.org # v5.6+
Signed-off-by: Antonio Borneo
Reported-by: Ahmad Fatoum
---
To: Alexandre Torgue
To: Jose Abreu
To: "David S. Miller"
To: Jakub Kicinski
Cc: Maxime Coquelin
Cc: net...@vger.ke
On Tue, 2020-11-24 at 23:22 +0100, Heiner Kallweit wrote:
> Am 24.11.2020 um 22:59 schrieb Antonio Borneo:
> > The rtl8211f supports downshift and before commit 5502b218e001
> > ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status")
> > the read-back of re
actual speed to detect downshift") is working fine also for this
phy and it's trivial re-using it to restore the downshift
detection on rtl8211f.
Add the phy specific read_status() pointing to the existing
function rtlgen_read_status().
Signed-off-by: Antonio Borneo
Link: https://lore.kernel
On Tue, 2020-11-24 at 10:20 -0800, Jakub Kicinski wrote:
> On Tue, 24 Nov 2020 15:23:27 +0100 Antonio Borneo wrote:
> > On Tue, 2020-11-24 at 15:15 +0100, Ahmad Fatoum wrote:
> > > On 10.10.19 00:26, Jakub Kicinski wrote:
> > > > On Mon, 7 Oct 2019 17:43:
On Tue, 2020-11-24 at 15:37 +, Russell King - ARM Linux admin wrote:
> On Tue, Nov 24, 2020 at 04:17:42PM +0100, Antonio Borneo wrote:
> > On Tue, 2020-11-24 at 14:56 +, Russell King - ARM Linux admin wrote:
> > > Userspace doesn't expect the advertising ma
On Tue, 2020-11-24 at 15:17 +, Russell King - ARM Linux admin wrote:
> On Tue, Nov 24, 2020 at 04:03:40PM +0100, Heiner Kallweit wrote:
> > Am 24.11.2020 um 15:38 schrieb Antonio Borneo:
> > > If the auto-negotiation fails to establish a gigabit link, the phy
> > >
On Tue, 2020-11-24 at 14:56 +, Russell King - ARM Linux admin wrote:
> On Tue, Nov 24, 2020 at 03:38:48PM +0100, Antonio Borneo wrote:
> > If the auto-negotiation fails to establish a gigabit link, the phy
> > can try to 'down-shift': it resets the bits in MII_CTRL100
se phy_resolve_aneg_linkmode in
genphy_read_status")
Cc: sta...@vger.kernel.org # v5.1+
Signed-off-by: Antonio Borneo
Link: https://lore.kernel.org/r/478f871a-583d-01f1-9cc5-2eea56d8c...@huawei.com
---
To: Andrew Lunn
To: Heiner Kallweit
To: Russell King
To: "David S. Miller"
To:
On Tue, 2020-11-24 at 15:15 +0100, Ahmad Fatoum wrote:
> Hello Jakub,
>
> On 10.10.19 00:26, Jakub Kicinski wrote:
> > On Mon, 7 Oct 2019 17:43:06 +0200, Antonio Borneo wrote:
> > > All the registers and the functionalities used in the callback
> > > dwmac5_fle
Some of these comments are part of the Linux GPU Driver Developer's
Guide.
Fix some minor typo in the comments and remove a repeated 'the'.
Signed-off-by: Antonio Borneo
---
drivers/gpu/drm/drm_connector.c | 22 +++---
1 file changed, 11 insertions(+), 11 del
;vhci-hcd" that has no
immediate assonance with usbip.
Add in usbip.8 the command to add the module vhci-hcd, similarly
as it's already present in usbipd.8 for usbip-host.
While there, rephrase the description of the command "usbip list
--remote=server".
Signed-off-by: A
With GCC 10, building usbip triggers error for multiple definition
of 'udev_context', in:
- libsrc/vhci_driver.c:18 and
- libsrc/usbip_host_common.c:27.
Declare as extern the definition in libsrc/usbip_host_common.c.
Signed-off-by: Antonio Borneo
---
tools/usb/usbip/libsrc/usbip_hos
Commit 64e62426f40d ("staging: usbip: edit Kconfig and rename
CONFIG options") renamed the module usbip as usbip-host, but the
example in the man page still reports the old module name.
Fix the module name in usbipd.8
Signed-off-by: Antonio Borneo
Fixes: 64e62426f40d ("stagi
;vhci-hcd" that has no
immediate assonance with usbip.
Add in usbip.8 the command to add the module vhci-hcd, similarly
as it's already present in usbipd.8 for usbip-host.
Signed-off-by: Antonio Borneo
---
tools/usb/usbip/doc/usbip.8 | 2 ++
1 file changed, 2 insertions(+)
diff --git a/
Fix typo s/mechansim/mechanism/
Signed-off-by: Antonio Borneo
---
drivers/staging/rtl8723bs/hal/hal_btcoex.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/rtl8723bs/hal/hal_btcoex.c
b/drivers/staging/rtl8723bs/hal/hal_btcoex.c
index 6e4a1fcb8790
QoS Databook 5.00a September 2017
Signed-off-by: Antonio Borneo
---
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index 2cb9c53f93b8
it should just be 'A
short "friendly name" to identify the clock'.
Replace it with "stmmac ptp".
Signed-off-by: Antonio Borneo
Fixes: 92ba6888510c ("stmmac: add the support for PTP hw clock driver")
---
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c | 2
: Antonio Borneo
Fixes: 9a8a02c9d46d ("net: stmmac: Add Flexible PPS support")
---
drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
index 3f
Fix typo s/mechansim/mechanism/
Signed-off-by: Antonio Borneo
---
drivers/ptp/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
index 960961fb0d7c..0517272a268e 100644
--- a/drivers/ptp/Kconfig
+++ b/drivers/ptp/Kconfig
Hi Joe,
can this series be queued for merge ?
I just found I mess-up the mail thread references, so here are the
latest versions:
[1/4 V2]
https://lore.kernel.org/lkml/20190508174347.13901-1-borneo.anto...@gmail.com/
[2/4] dropped
[3/4]
https://lore.kernel.org/lkml/20190508122721.7513-3-borneo
size of 4 characters [2]).
Replace the magic value 8 with a variable.
Add a command-line option "--tab-size" to let the user select a
TAB size value other than 8.
[1] http://openocd.org/
[2] http://openocd.org/doc/doxygen/html/stylec.html#styleformat
Signed-off-by: Antonio Borneo
Sig
On Thu, May 9, 2019 at 10:03 AM Joe Perches wrote:
>
> On Thu, 2019-05-09 at 09:21 +0200, Antonio Borneo wrote:
> > diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
> []
> > @@ -2224,7 +2229,7 @@ sub string_find_replace {
> > sub tabify {
> > my
size of 4 characters [2]).
Replace the magic value 8 with a variable.
Add a command-line option "--tab-size" to let the user select a
TAB size value other than 8.
[1] http://openocd.org/
[2] http://openocd.org/doc/doxygen/html/stylec.html#styleformat
Signed-off-by: Antonio Borneo
Sig
On Wed, May 8, 2019 at 11:14 PM Elliott, Robert (Servers)
wrote:
...
> Checking for 0 before using the value in division and modulo
> operations would be prudent.
True!
>From command line, $tabsize is parsed as integer so I should sort out
any non-positive value.
Will add a check after GetOptions
size of 4 characters [2]).
Replace the magic value 8 with a variable.
Add a command-line option "--tab-size" to let the user select a
TAB size value other than 8.
[1] http://openocd.org/
[2] http://openocd.org/doc/doxygen/html/stylec.html#styleformat
Signed-off-by: Antonio Borneo
Sig
On Wed, May 8, 2019 at 7:56 PM Joe Perches wrote:
>
> On Wed, 2019-05-08 at 19:43 +0200, Antonio Borneo wrote:
> > The size of 8 characters used for both TAB and indentation is
> > embedded as magic value allover the checkpatch script, and this
> > makes the script less re
tch 1 or 0 times) with "{0,4}" (Match
no more than 4 times) in the regular expression.
Fix also the similar test for types in unusual order.
Signed-off-by: Antonio Borneo
Fixes: 1574a29f8e76 ("checkpatch: allow multiple const * types")
---
v1->v2
use a max mat
rs [2]).
[1] http://openocd.org/
[2] http://openocd.org/doc/doxygen/html/stylec.html#styleformat
Signed-off-by: Antonio Borneo
Signed-off-by: Erik Ahlén
Signed-off-by: Spencer Oliver
---
V1 -> V2
add the command line option
scripts/checkpatch.pl | 23 +--
1 file c
On Wed, May 8, 2019 at 4:52 PM Joe Perches wrote:
...
> > In these cases the script will be probably modified and adapted,
> > so there is no need (at least for the moment) to expose this
> > setting on the script's command line.
>
> Disagree. Probably getter to add a --tabsize= option now.
Ok,
On Wed, May 8, 2019 at 4:51 PM Joe Perches wrote:
...
> It might be better to use a max match like {0,4} instead of *
>
> perl is pretty memory intensive at multiple unrestricted matches
> of somewhat complex patterns.
Agree! Will send a V2!
Thanks for the review!
Antonio
e cases the script will be probably modified and adapted,
so there is no need (at least for the moment) to expose this
setting on the script's command line.
[1] http://openocd.org/
[2] http://openocd.org/doc/doxygen/html/stylec.html#styleformat
Signed-off-by: Antonio Borneo
Signed-off-by: Er
Fix spelling of "concatenation".
Don't use tab after space in indentation.
Signed-off-by: Antonio Borneo
---
scripts/checkpatch.pl | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 9a247183b65c..373a
Match 1 or 0 times) with "*" (Match 0 or
more times) in the regular expression.
Fix also the similar test for types in unusual order.
Signed-off-by: Antonio Borneo
Fixes: 1574a29f8e76 ("checkpatch: allow multiple const * types")
---
scripts/checkpatch.pl | 4 ++--
1 file ch
The warning LINE_CONTINUATIONS does not offer a --fix.
Add the trivial --fix.
In case of consecutive lines with the same issue, this will
fix only the first line.
Signed-off-by: Antonio Borneo
---
scripts/checkpatch.pl | 7 +--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a
On Fri, Sep 7, 2018 at 3:15 PM Pascal PAILLET-LME wrote:
>
> From: pascal paillet
>
> The stpmic1 PMIC embeds several regulators and witches with
> different capabilities.
While fixing Kconfig, as Mark suggest, would you mind to fix also the
typo s/witches/switches/ in the commit message?
Anton
The call to spi_sync() can fail.
Check the return value and propagate it.
Signed-off-by: Antonio Borneo
---
To: David Woodhouse
To: Brian Norris
To: Boris Brezillon
To: Marek Vasut
To: Richard Weinberger
To: Cyrille Pitchen
To: Andrew Lunn
To: Chris Packham
To: Rob Herring
To: linux
Fix some minor typo spotted in comments:
- s/wit ha/with a/
- s/doestroyed/destroyed/
Signed-off-by: Antonio Borneo
---
Changes:
V1 -> V2
add commit message
To: Greg Kroah-Hartman
To: Jiri Slaby
Cc: Jiri Kosina
Cc: linux-kernel@vger.kernel.org
---
drivers/tty/tty_port.c | 4 ++--
1 f
Signed-off-by: Antonio Borneo
---
To: Greg Kroah-Hartman
To: Jiri Slaby
Cc: Jiri Kosina
Cc: linux-kernel@vger.kernel.org
---
drivers/tty/tty_port.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index 6b13719..1286f24
Hi Danilo,
just two minor issues below
On Thu, Aug 3, 2017 at 5:43 PM, Danilo Krummrich
wrote:
> This driver provides PS/2 serio bus support by implementing bit banging
> with the GPIO API. The GPIO pins, data and clock, can be configured with
> a node in the device tree or by generic device pro
n SPI, the
issue popped out.
The fix re-applies the initialization to ds_run/ds_done in
k3_dma_start_txd() that were removed by the commit above.
Also, one of the calls to k3_dma_start_txd() is triggered by
(ds_done != NULL), so remove the noisy and useless call to
WARN_ON_ONCE().
Signed-off-by: Anto
descriptor
the behaviour of ds_run/ds_done is properly fixed.
The remaining ON_WARN_ONCE() are never triggered and can be
removed.
Signed-off-by: Antonio Borneo
---
To: dmaeng...@vger.kernel.org
To: Vinod Koul
To: Dan Williams
Cc: linux-kernel@vger.kernel.org
Cc: John Stultz
Cc: Zhangfei Gao
--
used as a flag: when not NULL
it signals that the descriptor has been consumed. No need to
free it because it would be free by vchan_complete().
The fix takes back the code changed by the commit above:
- remove the free on the descriptor;
- initialize ds_done to NULL for the next run.
Signed-
ouble free introduced in the same commit
- cosmetic removal of useless ON_WARN_ONCE()
Thread in https://patchwork.kernel.org/patch/9833791/
v1 -> v2
- split the patch
- change patch title to "dmaengine: ..."
Antonio Borneo (3):
dmaengine: k3dma: fix non-cyclic mode
dmaengine: k3
On Fri, Jul 28, 2017 at 12:07 PM, Mark Brown wrote:
> On Fri, Jul 28, 2017 at 01:26:09AM +0200, Antonio Borneo wrote:
>> From: Antonio Borneo
>>
>> On Hikey target board, enabling CONFIG_OF_DYNAMIC triggers several
>> errors at kernel boot, like
>> OF: ERR
tils.c
> b/sound/soc/generic/simple-card-utils.c
> --- a/sound/soc/generic/simple-card-utils.c
> +++ b/sound/soc/generic/simple-card-utils.c
> @@ -263,6 +263,9 @@ static int asoc_simple_card_get_dai_id(struct device_node
> *ep)
> id = i;
> i++;
> }
> +
> + of_node_put(node);
> +
> if (id < 0)
> return -ENODEV;
>
> @@ -282,11 +285,6 @@ int asoc_simple_card_parse_graph_dai(struct device_node
> *ep,
> if (!dai_name)
> return 0;
>
> - /*
> -* of_graph_get_port_parent() will call
> -* of_node_put(). So, call of_node_get() here
> -*/
> - of_node_get(ep);
> node = of_graph_get_port_parent(ep);
>
> /* Get dai->name */
> diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
> --- a/sound/soc/soc-core.c
> +++ b/sound/soc/soc-core.c
> @@ -4113,6 +4113,8 @@ int snd_soc_get_dai_id(struct device_node *ep)
> }
> mutex_unlock(&client_mutex);
>
> + of_node_put(node);
> +
> return ret;
> }
> EXPORT_SYMBOL_GPL(snd_soc_get_dai_id);
Tested on Hikey board, and it fixes the issue reported in
https://patchwork.kernel.org/patch/9863961/
but I cannot test the part regarding audio-graph-scu-card
Tested-by: Antonio Borneo
From: Antonio Borneo
On Hikey target board, enabling CONFIG_OF_DYNAMIC triggers several
errors at kernel boot, like
OF: ERROR: Bad of_node_put() on /soc/i2s@f7118000/ports/port@0
OF: ERROR: Bad of_node_put() on /soc/i2s@f7118000/ports/port@0/endpoint
each followed by stack dump.
Fixed by
From: Antonio Borneo
On Hikey target board, enabling CONFIG_OF_DYNAMIC triggers several
errors at kernel boot, like the following one
OF: ERROR: Bad of_node_put() on /soc/i2s@f7118000/ports/port@0/endpoint
each followed by stack dump.
of_graph_get_port_parent() walks through the parents looking
From: Antonio Borneo
On Hikey target board, enabling CONFIG_OF_DYNAMIC triggers several
errors at kernel boot, like the following one
OF: ERROR: Bad of_node_put() on /soc/i2s@f7118000/ports/port@0/endpoint
each followed by stack dump.
of_graph_get_port_parent() walks through the parents looking
From: Antonio Borneo
On Hikey target board, enabling CONFIG_OF_DYNAMIC triggers several
errors at kernel boot, like the following one
OF: ERROR: Bad of_node_put() on /soc/i2s@f7118000/ports/port@0
each followed by stack dump.
Each iteration of of_for_each_phandle(){} already provides the
needed
Hi Mark,
thanks for the review.
On Wed, Jul 26, 2017 at 1:37 PM, Mark Brown wrote:
> On Tue, Jul 25, 2017 at 11:49:52PM +0200, Antonio Borneo wrote:
>
>> Fixed by:
>> - removing of_node_put() in the body of of_for_each_phandle(){},
>> since already provided at each i
branch dev/hikey-mainline-WIP
Signed-off-by: Antonio Borneo
---
To: Liam Girdwood
To: Mark Brown
To: Jaroslav Kysela
To: Takashi Iwai
To: alsa-de...@alsa-project.org
Cc: linux-kernel@vger.kernel.org
Cc: Wei Xu
Cc: John Stultz
Cc: linux-arm-ker...@lists.infradead.org
---
sound/soc/generic/audio
On Wed, Jul 19, 2017 at 5:47 AM, Vinod Koul wrote:
> On Wed, Jul 19, 2017 at 12:29:55AM +0200, Antonio Borneo wrote:
>> On Tue, Jul 18, 2017 at 5:58 PM, Vinod Koul wrote:
>> > On Mon, Jul 10, 2017 at 01:53:43PM -0700, John Stultz wrote:
>> >> From: Anto
On Tue, Jul 18, 2017 at 5:58 PM, Vinod Koul wrote:
> On Mon, Jul 10, 2017 at 01:53:43PM -0700, John Stultz wrote:
>> From: Antonio Borneo
>>
>> Commit 36387a2b1f62b5c087c5fe6f0f7b23b94f722ad7 ("k3dma: Fix
>> memory handling in preparation for cyclic mode&qu
On Tue, Mar 21, 2017 at 8:08 AM, Guodong Xu wrote:
> From: Wang Xiaoyin
>
> Enable DMA in spi0.
Hi Guodong, Xiaoyin,
added linux-spi in copy.
Actually the patch does not enable the DMA. The commit message is not correct.
> Cc: Antonio Borneo
> Signed-off-by: Zhong Kaihua
The property "pl022,com-mode" can only assume one of the values of
the enum ssp_mode, defined in include/linux/amba/pl022.h
List the possible numeric values and report the associated meaning.
Signed-off-by: Antonio Borneo
---
To: Mark Brown
To: Rob Herring
To: Mark Rutland
The properties "pl022,hierarchy" and "pl022,slave-tx-disable" are
not documented in DT binding and don't exist in the driver code.
They have no effect and can be removed.
Signed-off-by: Antonio Borneo
---
Cc: Mark Brown
Cc: Rob Herring
Cc: Mark Rutland
To: Viresh Kum
The property "pl022,hierarchy" is not documented in DT binding
and doesn't exist in the driver code.
It has no effect and can be removed.
Signed-off-by: Antonio Borneo
---
Cc: Mark Brown
Cc: Rob Herring
Cc: Mark Rutland
Cc: Viresh Kumar
Cc: Shiraz Hashim
Cc: Russell King
To
The properties "pl022,hierarchy" and "pl022,slave-tx-disable" are
not documented in DT binding and don't exist in the driver code.
They have no effect and can be removed.
Signed-off-by: Antonio Borneo
---
Cc: Mark Brown
Cc: Rob Herring
Cc: Mark Rutland
Cc: Viresh Kum
at the end of the file.
[1] https://lkml.org/lkml/2012/7/9/421
[2] https://lkml.org/lkml/2012/8/21/427
[3] https://lkml.org/lkml/2012/8/21/436
Signed-off-by: Antonio Borneo
---
To: Mark Brown
To: Rob Herring
To: Mark Rutland
Cc: Viresh Kumar
Cc: Shiraz Hashim
Cc: Russell King
Cc: Brijesh Singh
On Mon, Nov 21, 2016 at 12:07 PM, Benjamin Tissoires
wrote:
> The GPIO part doesn't provide interrupts when GPIO are toggled.
> So use a polling mechanism if someone requests a GPIO as an IRQ.
>
> Signed-off-by: Benjamin Tissoires
> ---
>
> I am currently running this patch in my local tree.
> It
Commit 1ada1441e73a0f51296bfae527acbeae61ff0d52 ("[ARM] 5348/1:
fix documentation wrt location of the alignment trap interface")
left one location incorrect.
Signed-off-by: Antonio Borneo
To: Jonathan Corbet
To: linux-...@vger.kernel.org
Cc: Nicolas Pitre
Cc: Russell King
Cc: li
On Wed, Jul 8, 2015 at 6:41 PM, Jiri Kosina wrote:
> On Wed, 8 Jul 2015, Ellen Wang wrote:
>
>> > > Works as described. Thank you!
>> > >
>> > > By the way, I tested the code with and without your fix on my rev 2 chip,
>> > > and
>> > > it behaved the same way as you describe on your rev 1 chip.
On Fri, Jun 26, 2015 at 9:21 PM, Sergei Shtylyov
wrote:
> Hello.
>
> On 6/26/2015 3:08 PM, Geert Uytterhoeven wrote:
>
>> If NO_DMA=y:
>
>
>> ERROR: "dma_sync_single_for_cpu"
>> [drivers/net/ethernet/via/via-rhine.ko] undefined!
>> ERROR: "dma_set_mask" [drivers/net/ethernet/via/via-rhin
In ancient times it was necessary to manually initialize the bus
field of an spi_driver to spi_bus_type. These days this is done in
spi_register_driver(), so we can drop the manual assignment.
Signed-off-by: Antonio Borneo
To: Solomon Peachy
To: Kalle Valo
To: linux-wirel...@vger.kernel.org
To
In ancient times it was necessary to manually initialize the bus
field of an spi_driver to spi_bus_type. These days this is done in
spi_register_driver(), so we can drop the manual assignment.
Signed-off-by: Antonio Borneo
To: Alan Ott
To: Alexander Aring
To: Varka Bhadram
To: linux-w
In ancient times it was necessary to manually initialize the bus
field of an spi_driver to spi_bus_type. These days this is done in
spi_register_driver(), so we can drop the manual assignment.
Signed-off-by: Antonio Borneo
To: Greg Kroah-Hartman
To: de...@driverdev.osuosl.org
Cc: linux-kernel
In ancient times it was necessary to manually initialize the bus
field of an spi_driver to spi_bus_type. These days this is done in
spi_register_driver(), so we can drop the manual assignment.
Signed-off-by: Antonio Borneo
To: Mauro Carvalho Chehab
To: Kyungmin Park
To: Andrzej Hajda
To
In ancient times it was necessary to manually initialize the bus
field of an spi_driver to spi_bus_type. These days this is done in
spi_register_driver(), so we can drop the manual assignment.
Signed-off-by: Antonio Borneo
To: Jonathan Cameron
To: Lars-Peter Clausen
To: Karol Wrona
To: linux
In ancient times it was necessary to manually initialize the bus
field of an spi_driver to spi_bus_type. These days this is done in
spi_register_driver(), so we can drop the manual assignment.
Signed-off-by: Antonio Borneo
To: Jaroslav Kysela
To: Takashi Iwai
To: Liam Girdwood
To: Mark Brown
ommit message from
Lars-Peter; only minor reformat to stay in 75 char/line and fix the
name of spi_register_driver().
Regards,
Antonio
Antonio Borneo (6):
ASoC: wm0010: Remove redundant spi driver bus initialization
iio: ssp_sensors: Remove redundant spi driver bus initialization
st
here forces a single report at a time
by requesting in cp2112_read() no more than 61 byte of data, which
is the payload size of a single data report.
Signed-off-by: Antonio Borneo
---
Hi Jiri,
I think this should go through linux-stable.
Thanks,
Antonio
drivers/hid/hid-cp2112.c | 2 ++
1 file ch
USE_OF is used as intermediate Kconfig option by few
arch's (ARM, MIPS, Xtensa); in all these cases it
implies setting option OF too.
Replace the only instance of USE_OF in clocksource
with OF.
Signed-off-by: Antonio Borneo
---
drivers/clocksource/Kconfig | 2 +-
1 file changed, 1 inse
USE_OF is used as intermediate Kconfig option by few
arch's (ARM, MIPS, Xtensa).
Replace instances of USE_OF outside of arch folders
with proper OF_???.
Signed-off-by: Antonio Borneo
---
drivers/net/ethernet/via/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --
Signed-off-by: Antonio Borneo
---
drivers/net/ethernet/via/via-rhine.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/net/ethernet/via/via-rhine.c
b/drivers/net/ethernet/via/via-rhine.c
index de28504..a1aaf3a 100644
--- a/drivers/net/ethernet/via/via-rhine.c
+++ b/drivers/net
s the scope of USE_OF and makes the drivers
(actually only the Via network ones) available to other arch's
that don't use USE_OF.
The two patches of this series can be applied independently and
can be taken separately in the respective tree.
Antonio Borneo (2):
clocksource: Kconfig: repl
On Sun, Mar 15, 2015 at 8:10 PM, Wolfram Sang wrote:
> On Sun, Mar 15, 2015 at 07:43:18PM +0800, Antonio Borneo wrote:
>> The device cp2112 does not support i2c combined transactions,
>> since unable to suppress the stop bit between adjacent i2c
>> transactions.
>
i2c transactions.
Signed-off-by: Antonio Borneo
---
Hi Benjamin,
In [1] we had a talk about implementing i2c_transfer() as a
sequence of elementary (not combined) i2c transactions.
After Jonathan's reply in [2], I went to check better the
existing I2C drivers and I changed opinion.
Added linux-i2
On Sat, Nov 8, 2014 at 9:29 PM, Karol Wrona wrote:
> Adds stm32 bootloader protocol handling.
>
Hi Karol,
Sorry for not being able to reply earlier. I'm finally back after a
period off-line.
I have implemented a first version of SPI flash upgrade in the
user-mode tool "stm32flash". I will submi
(); the common
buffer is modified by the interrupt handler with the new report
and then i2c_hid_get_raw_report() proceed using wrong data.
Fix it by using a separate buffers for synchronous reports.
Signed-off-by: Jean-Baptiste Maneyrol
[Antonio Borneo: cleanup, rebase to v3.17, submit mainline
Hi Benjamin,
On Tue, Nov 18, 2014 at 5:43 AM, Benjamin Tissoires
wrote:
> Hey Antonio,
>
> On Nov 16 2014 or thereabouts, Antonio Borneo wrote:
>> From: Jean-Baptiste Maneyrol
>>
>> From: Jean-Baptiste Maneyrol
>>
>> Current driver uses a c
From: Jean-Baptiste Maneyrol
From: Jean-Baptiste Maneyrol
Report is received in "buffer"; fix the following i2c_hid_dbg()
to dump data from the correct pointer.
Signed-off-by: Jean-Baptiste Maneyrol
[Antonio Borneo: cleanup and rebase to v3.17]
Signed-off-by: Antonio Borneo
---
d
received in i2c_hid_get_raw_report(); the common
buffer is modified by the interrupt handler with the new report
and then i2c_hid_get_raw_report() proceed using wrong data.
Fix it by using a separate buffers for asynchronous reports.
Signed-off-by: Jean-Baptiste Maneyrol
[Antonio Borneo: cleanup and
On Fri, Oct 10, 2014 at 7:54 PM, Karol Wrona wrote:
> Adds stm32 bootloader protocol handling.
>
> SPI transfers are done using DMA safe buffer which is allocated once per
> spi upgrade life cycle. Now it supports only SPI bus but it looks that UART
> or I2C are quite similar and it can be used as
On Tue, Jul 15, 2014 at 4:21 AM, Jonathan Cameron wrote:
> On 14/07/14 18:32, Philippe Reynes wrote:
Hi Jonathan,
regarding your comment below
>> +static int max5821_get_value(struct iio_dev *indio_dev,
>> +int *val, int channel)
>> +{
>> + struct max5821_data
cp2112 supports single I2C read/write transactions.
It can't combine I2C transactions.
Add master_xfer, using similar code flow as for smbus_xfer.
Signed-off-by: Antonio Borneo
Reviewed-by: Benjamin Tissoires
---
ChangeLog v1->v2:
- In cp2112_i2c_xfer() set variable "ret"
On Mon, Jul 7, 2014 at 10:03 PM, Benjamin Tissoires
wrote:
> On Sun, Jun 29, 2014 at 2:13 AM, Antonio Borneo
> wrote:
>> CP2112 does not offer an atomic method to set both gpio
>> direction and value.
>> Also it does not permit to set gpio value before putting
&g
On Mon, Jul 7, 2014 at 9:57 PM, Benjamin Tissoires
wrote:
> Hi Antonio,
>
> On Sun, Jun 29, 2014 at 2:14 AM, Antonio Borneo
> wrote:
>> cp2112 supports single I2C read/write transactions.
>> It can't combine I2C transactions.
>>
>> Add master_xfer,
cp2112 supports single I2C read/write transactions.
It can't combine I2C transactions.
Add master_xfer, using similar code flow as for smbus_xfer.
Signed-off-by: Antonio Borneo
---
drivers/hid/hid-cp2112.c | 102 ++-
1 file changed, 101 inser
112.
Signed-off-by: Antonio Borneo
---
drivers/hid/hid-cp2112.c | 8 ++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/hid/hid-cp2112.c b/drivers/hid/hid-cp2112.c
index 56be85a..3952d90 100644
--- a/drivers/hid/hid-cp2112.c
+++ b/drivers/hid/hid-cp2112.c
@@ -240,8 +
Commit-ID: f96364041ccda63ff4bed96fd06b267d8d841dc0
Gitweb: http://git.kernel.org/tip/f96364041ccda63ff4bed96fd06b267d8d841dc0
Author: Antonio Borneo
AuthorDate: Sun, 13 Apr 2014 16:26:08 +0800
Committer: Ingo Molnar
CommitDate: Mon, 14 Apr 2014 08:50:36 +0200
x86/platform: Fix "
Running:
make O=dir x86_64_defconfig
make O=dir kvmconfig
the second command dirties the source tree with file ".config",
symlink "source" and objects in folder "scripts".
Fixed by adding paths in arch Makefile.
Signed-off-by: Antonio Borneo
---
92 matches
Mail list logo
