[PATCH] ASoC: davinvi-mcasp: Balance pm_runtime_enable() on probe failure

If probe fails then we need to call pm_runtime_disable() to balance out the previous pm_runtime_enable() call. Signed-off-by: Anil Kumar --- :100644 100644 0eed9b1... 99c747d... M sound/soc/davinci/davinci-mcasp.c sound/soc/davinci/davinci-mcasp.c | 1 + 1 file changed, 1 insertion(+) diff

Build error in torvalds kernel 3.11 for omap2plus

Hi All, I am getting below build error in torvalds kernel 3.11 for omap2plus. scripts/kconfig/conf --silentoldconfig Kconfig CHK include/generated/uapi/linux/version.h CHK include/generated/utsrelease.h make[1]: `include/generated/mach-types.h' is up to date. CALLscripts/checks

Re: [PATCH V4] ARM: dts: add minimal DT support for DevKit8000.

Hi Benoit, On Thu, Mar 7, 2013 at 12:21 PM, Benoit Cousson wrote: > Hi, > > On 03/06/2013 06:53 PM, Tony Lindgren wrote: >> * Anil Kumar [130305 18:40]: >>> Hi Tony, >>> >>>>> From: linux-arm-kernel [mailto:linux-arm-kernel- >>>>>

Re: Getting kernel uImage build issue on omap2+

Hi Javier, On Sat, Mar 16, 2013 at 2:53 PM, Javier Martinez Canillas wrote: > On Sat, Mar 16, 2013 at 5:44 AM, Anil Kumar wrote: >> Hi, >> >> I am getting kernel uImage build issue on omap2+ log[1] >> >> Taken kernel branch "for_3.10/dts" from >>

Re: [PATCH V4] ARM: dts: add minimal DT support for DevKit8000.

Hi Tony, >> From: linux-arm-kernel [mailto:linux-arm-kernel- >> boun...@lists.infradead.org] On Behalf Of Anil Kumar >> Sent: Wednesday, February 27, 2013 8:03 AM >> To: devicetree-disc...@lists.ozlabs.org; linux-o...@vger.kernel.org; >> linux-kernel@

Re: [PATCH V2] ARM: dts: omap3-devkit8000: Enable audio support

Hi, On Mon, Feb 18, 2013 at 4:50 PM, Peter Ujfalusi wrote: > On 02/16/2013 08:33 AM, Anil Kumar wrote: >> Add the needed sections to enable audio support on >> Devkit8000 when booted with DT blob. >> >> Signed-off-by: Anil Kumar > > Looks good: > Acked-by: Pe

Re: FW: [PATCH V4] ARM: dts: add minimal DT support for DevKit8000.

ime, Information > of twl4030 (PMIC), MMC1, I2C1 and leds are added. > > Signed-off-by: Anil Kumar > Tested-by: Thomas Weber Gentle Ping. As there are no review comments on this patch, Could you please pull this patch ? Thanks, Anil > --- > -This patch is based on top of ker

[PATCH V4] ARM: dts: add minimal DT support for DevKit8000

), MMC1, I2C1 and leds are added. Signed-off-by: Anil Kumar Tested-by: Thomas Weber --- -This patch is based on top of kernel 3.8-rc5. -Tested on Devkit8000. For V4: -Tiny nitpick. For V3: - Remove pin mux as done at device boot time by default. For V2: - Change model name as "TimLL

Re: [PATCH V3] ARM: dts: add minimal DT support for DevKit8000

Hi Manish, On Wed, Feb 20, 2013 at 5:28 PM, Manish Badarkhe wrote: > On Sat, Feb 16, 2013 at 12:49 PM, Anil Kumar wrote: >> DevKit8000 is a beagle board clone from Timll, sold by >> armkits.com. The DevKit8000 has RS232 serial port, LCD, DVI-D, >> S-Video, Ethernet, SD/

Re: [PATCH 1/2] ARM: dts: omap3: Add gpmc node

Hi, On Sat, Feb 16, 2013 at 5:54 PM, Ezequiel Garcia wrote: > Hi Anil, > > On Sat, Feb 16, 2013 at 05:08:27PM +0530, Anil Kumar wrote: >> Add gpmc DT node. >> >> Signed-off-by: Anil Kumar >> --- >> :100644 100644 1acc261... 9f36531... March/arm/bo

[PATCH 2/2] ARM: dts: omap3-devkit8000: add nand dt node

Add the needed sections to enable nand support on Devkit8000. Add nand partitions information. Signed-off-by: Anil Kumar --- :100644 100644 6338993... 6c6decf... M arch/arm/boot/dts/omap3-devkit8000.dts arch/arm/boot/dts/omap3-devkit8000.dts | 52 1 files

[PATCH 1/2] ARM: dts: omap3: Add gpmc node

Add gpmc DT node. Signed-off-by: Anil Kumar --- :100644 100644 1acc261... 9f36531... M arch/arm/boot/dts/omap3.dtsi arch/arm/boot/dts/omap3.dtsi | 11 +++ 1 files changed, 11 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index

[PATCH 0/2] arm/dts: OMAP3: Add gpmc DT node support

Add gpmc DT node in dtsi file. Add nand DT node and partitions information for devkit8000. This series is based on top of branch “omap-for-v3.9/gpmc” git tree http://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git and patches. Anil Kumar:- ARM: dts: add minimal DT support for

[PATCH V2] ARM: dts: omap3-devkit8000: Enable audio support

Add the needed sections to enable audio support on Devkit8000 when booted with DT blob. Signed-off-by: Anil Kumar --- This patch is based on top of kernel 3.8-rc5 and the following patches. Peter Ujfalusi:- ASoC: twl4030: Correct the support for Voice port ASoC: twl4030: Convert MICBIAS to

[PATCH V3] ARM: dts: add minimal DT support for DevKit8000

), MMC1, I2C1 and leds are added. Signed-off-by: Anil Kumar Tested-by: Thomas Weber --- -This patch is based on top of kernel 3.8-rc5. -Tested on Devkit8000. For V3: - Remove pin mux as done at device boot time by default. For V2: - Change model name as "TimLL OMAP3 Devkit8000"

[PATCH] ARM: dts: omap3-devkit8000: Enable audio support

Add the needed sections to enable audio support and related pin mux on Devkit8000 when booted with DT blob. Signed-off-by: Anil Kumar --- This patch is based on top of kernel 3.8-rc5 and the following patches. Peter Ujfalusi:- ASoC: twl4030: Correct the support for Voice port ASoC: twl4030

Re: Sound record on Devkit8000 with DT boot issue

Hi Peter, On Mon, Feb 11, 2013 at 11:44 PM, Peter Ujfalusi wrote: > Hi, > > On 02/11/2013 06:58 PM, Anil Kumar wrote: >>> Here you should have something like: >>> ti,audio-routing = >>> "Ext Spk", "PREDRIVEL", >>>

Re: Sound record on Devkit8000 with DT boot issue

Hi Peter, Thanks for helping me. please see my comment inline On Mon, Feb 11, 2013 at 6:47 PM, Peter Ujfalusi wrote: > On 02/10/2013 04:21 PM, Anil Kumar wrote: >> Hi All, >> >> I am working on Devkit8000 and adding DT support for that. I am trying >> to add sou

[PATCH V2] ARM: dts: add minimal DT support for DevKit8000

, I2C1, leds and there pim mux information are added. Signed-off-by: Anil Kumar Tested-by: Thomas Weber --- -This patch is based on top of kernel 3.8-rc5. -Tested on Devkit8000. For V2: -Change model name as "TimLL OMAP3 Devkit8000" -Change compatible as "timll,omap3-devkit800

[PATCH] ARM: dts: add minimal DT support for DevKit8000

, I2C1, leds and there pim mux information are added. Signed-off-by: Anil Kumar Tested-by: Thomas Weber --- -This patch is based on top of kernel 3.8-rc5. -Tested on Devkit8000. :100644 100644 5ebb44f... 22ebc76... M arch/arm/boot/dts/Makefile :00 100644 000... 9864fd7... A arch/arm

noapic for smp

Hi, I have a rhel4 (2.6.9-5.EL) system. The SMP kernel boot fails(rather locks up system). But when use "noapic" it boots fine. Is it that my system "APIC" is bad? Will "noapic" have performance impact (IRQ routing,etc)? My system is a Uni processor with HT enabled. with regards, Anil

driver compile parse errors for RHEL4

Hi, I am getting parse errors when I try to build aic7xxx( Adaptec SCSI controller) driver for RHEL4. I am using my own build enviroment (I mean Makefiles, scripts) to build this. #gcc -v Reading specs from /usr/adaptec/build/gcc343-32bit/lib/gcc/i386-redhat-linux/3.4.3/specs Configured with: ./c

module insert question

Hi, Can you please let me know, what all files does the OS look into to load modules? I see the following messages during boot rather installation: == Finished bus probing modules to insert tg3 aic79xx == which files does the OS look into to load tg3 and aic79xx after finishing bus probin

loading driver automatically & manually

Hi, I am trying to install RHEL 4, 2.6.9-5.EL. I have adaptec 39320 controller, The install CD already has aic79xx driver in it. The driver does NOT load for some reason. If I take the same aic79xx driver source, Create an img and install RHEL4 using linux dd, it works fine. Can you please let

driver compile Parse error with gcc-3.4.3

Hi, I am new to linux. I am trying to build one of my drivers for 2.6.9-5.EL, RHEL 4, I am getting compile parse errors as follows: error: parse error before '(' token #gcc -v Configured with: ./configure --prefix=/usr/adaptec/build/gcc343-32bit --enable-threads=posix --disable-checking --target=

RE: Validation of memory allocated through kmalloc

use sys_mprotect(...) to verify the validity of the returned address. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED] Sent: Sunday, June 10, 2001 2:45 PM To: [EMAIL PROTECTED] Subject: Validation of memory allocated through kmalloc Hi

RE: sizeof problem in kernel modules

struct { short x; long y; short z; }bad_struct; struct { long y; short x; short z; }good_struct; I would expect both structs to be 8byte in size , or atleast the same size ! but good_struct turns out to be 8bytes and bad_struct 12 . what am I doing wrong here ? thx ! hofrat

RE: threading question

Since while using only a small subset of primitives provided by the pthreads the burden for the other primitive maintanence is much more so i too feel when we use only a small part its better to implement in our own requiredd way for performance issues. -Original Message- From: [EMAIL PRO

RE: Validating dynamically allocated kernel memory

try "sys_mprotect" with neccessary bit patterns set i.e, read/write/exec type of protection check. anil -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED] Sent: Monday, June 11, 2001 5:12 PM To: [EMAIL PROTECTED] Subject: Validating dynami

RE:

you can use "sys_mprotect" call which is kernel space equ. of "mprotect" . The implementation for the same can be found in "mm\mprotect.c". anil -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED] Sent: Monday, June 11, 2001 10:29 AM To: [E

RE: semaphores and noatomic flag

Will it not be a very specialized case rather than being general call type? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Mihai Moise Sent: Monday, June 04, 2001 11:05 PM To: [EMAIL PROTECTED] Subject: semaphores and noatomic flag I write this to disc

Kernel Address

Under which directory is the Linus's kernel? anil - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/

File read.

hi, How do i read file within the kernel modules. I hope we can't use the FS open... calls within kernel. thanks - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.h

Linking

How do i link the kernel functions such as test_ans_set functions with my applications. thanks, anil - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please r

__exit

what does __exit, __p and other such directives means in the linux source code. what is its significance. thanks, anil - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-

RAID Benchmarking

Hi, I want to know , how to Benchmark the performance of RAID.Is there any tool for benchmarking? with regards, Anil __ Do You Yahoo!? Yahoo! Shopping - Thousands of Stores. Millions of Products. http://shopping.yahoo.com/ - To unsubscribe fr

Re: passing arguments to module

> >can anybody tell how to pass argument to modules? > > RTFM. man modprobe. man insmod. man modules.conf. > sorry i didn't ask the question properly. I need to know how does kernel modules accept run time arguments from user? Thanks Anil __

passing arguments to module

Hi, can anybody tell how to pass argument to modules? thanks in advance, Anil Prasad Note:Please CC the answer __ Do You Yahoo!? Yahoo! Calendar - Get organized for the holidays! http://calendar.yahoo.com/ - To unsubscribe from this list: send the

problem with startx in linux kernel 2.4

Hi, I ahave installed Red Hat 7.0 kernel ver 2.4.0-test9 After I boot, when I do #startx I get an error as server crash. My processor is Pentium II I am attaching with this mail the error output I get and also /var/log/XFree86.0.log file Please let me know how to fix this

Installing kernel 2.4

Hi , I installed Red Hat 7.0, I am able to find the linux-2.2.16 in /usr/src These are the following steps I did to install kernel 2.4: cd /usr/src #rm -r linux # rm -rf linux-2.2.16 #tar -xvf linux-2.4.0-test9.tar #cd /usr/src #ls linux redhat #mv linux linux-2.4.0-test

physical end of disk

Hi, I want to know how does the ide driver calculate the end of the disk. Is there any function in the ide driver that finds the end of the disk? I dont know the particular ide mailing list.So I have posted to linux-kernel mailing list. with regards, Anil

mkraid

Hi, I have a problem with mkraid I am working on a Red hat Linux ver 7.0 kernel version: 2.2.16 No raid patch no raid tools when I run #mkraid /dev/md0 when I check /proc/mdstat,I find md0 active with raid information. But when again I run #mkraid /dev/md0 I get an me

RAID superblock

Hi, After I create a RAID setup on the drives,The superblock will be generated at the end of the drives. If I move these drives to other linux system, will this system recognise the RAID setup without reconfiguring the Linux ? with regards, Anil _

RAID from BIOS

Hi, 1. Does Linux support this: Setting RAID options & configurations from BIOS itself. 2.I am not able to post messages to linux-raid group. with regards, Anil __ Do You Yahoo!? Yahoo! Messenger - Talk while you surf! It's FREE. http://im

regarding fsck

Hi, I am getting a kernel panic when I boot linux. There is some bad block. To get rid of this, I want to run fsck.I boot linux with a boot diskette and then with rescue.img I get to the command prompt and then run fsck. #e2fsck /dev/hdb5 //hdb5 is my linux native when I run

RAID setup

Hi, Does Linux give options to choose RAID levels from BIOS? with regards, Anil __ Do You Yahoo!? Yahoo! Messenger - Talk while you surf! It's FREE. http://im.yahoo.com/ - To unsubscribe from this list: send the line "unsubscribe linux-k

Bootable RAID

Hi, I want to make a Bootable RAID. can I make a partition on the disk which I want to make as bootable or should I be use whole disk? What I mean is like this: In the lilo.conf file I do like this: disk = /dev/md0 boot = /dev/hdc Is this all what I can do? or can I make a partito

remap_page_range

Hi, suppose i allocate an buffer by calling kmalloc. i want to map this buffer to user address space. will remap_page_range will automatically map this buffer to calling process's address space. thanks. __ Do You Yahoo!? Yahoo! Messenger - Talk

RAID setup

Hi, I want to setup RAID. I am working on kernel version 2.2.12. I am using RAID patches available. I create a RAID configuring file called /etc/raidtab #mkraid /dev/md0/*md0 is the device I am selecting*/ After this when I check /proc/mdstat , I find that

RAID setup

Hi, I want to setup RAID. I am working on kernel version 2.2.12. I am using RAID patches available. I create a RAID configuring file called /etc/raidtab #mkraid /dev/md0/*md0 is the device I am selecting*/ After this when I check /proc/mdstat , I find that

disk partition & RAID

Hi, I want to setup the RAID. For this I am partitioning the disks .The following is the procedure: fdisk /dev/hde fdisk -n /dev/hde /*to add new partition*/ I specify the first & last cylinder fdisk -w /dev/hde /*save & quit*/ when I do so , I get following : The partition table h

patch installation

Hi, I am installing a RAID patch to my present kernel which is 2.2.12. This is the procedure I am following: 1.I get the patch file in /usr/src/linux 2. #patch -p1 < patchfilename After this is done it asks me something like this: Already available . creating a patch file /usr/src/

RAID patches

Hi, I am looking for RAID patches .Please suggest where can I get these patches. with regards, Anil __ Do You Yahoo!? Yahoo! Photos - 35mm Quality Prints, Now Get 15 Free! http://photos.yahoo.com/ - To unsubscribe from this list: send the line "

question : make bzImage

Hi, I want to build the kernel These are the following steps what I am doing: In /usr/src/linux make config make dep make bzImage while make bzImage , I get many errors under diffirent drivers ex: sound, net, char Ex: undefined reference in hfmodem driver same errors for sound & video

question regarding adding kernel patch

Hi, I am working on Red hat linux ver 6.1 kernel version : 2.2.12 I want to add as patch for RAID controller supported in 2.3.40.For this I need kernel version patch 2.3.40 where can I get this 2.3. kernel version with regards, Anil ___