Thanks for the reply Lucas. It makes sense now!
> On 15 Jun 2024, at 12:18 AM, Lucas De Marchi wrote:
>
> On Thu, Jun 06, 2024 at 06:49:59AM GMT, Aditya Garg wrote:
>> Hi
>>
>> I am Aditya Garg. I often require using out of tree drivers to support
>> various hardwares on Linux. Sometimes the
On Sun, 09 Jun 2024 13:05:43 +0200, Stanislav Jakubek wrote:
> Add the accelerometer and magnetometer that are present on the Motorola
> Moto G (2013) device.
>
>
Applied, thanks!
[1/1] ARM: dts: qcom: motorola-falcon: add accelerometer, magnetometer
commit: 5756101babc5334a9bc99601d1cc
On Thu, 06 Jun 2024 21:18:31 +0200, Luca Weiss wrote:
> Take a shot at converting the last driver that requires direct
> "qcom,ipc*" syscon references in devicetree by allowing the smsm driver
> to use the mailbox interface to achieve the same effect.
>
> Still not sure if the devicetree binding
On Thu, 06 Jun 2024 11:09:06 +0200, Luca Weiss wrote:
> Specify the file name for the squashed/non-split firmware with the .mbn
> extension instead of the split .mdt. The kernel can load both but the
> squashed version is preferred in dts nowadays.
>
>
Applied, thanks!
[1/1] arm64: dts: qcom:
Disable the network device & turn off carrier before modifying the
number of queue pairs.
Process all the in-flight packets and then turn on carrier, followed
by waking up all the queues on the network device.
Signed-off-by: Abhinav Jain
---
drivers/net/virtio_net.c | 17 +++--
1 fil
On Fri, Jun 14, 2024 at 09:26:59PM +0200, Jiri Olsa wrote:
> On Fri, Jun 14, 2024 at 10:48:22AM -0700, Nathan Chancellor wrote:
> > Hi Jiri,
> >
> > On Tue, Jun 11, 2024 at 01:21:52PM +0200, Jiri Olsa wrote:
> > > Adding uretprobe syscall instead of trap to speed up return probe.
> > ...
> > > dif
On Fri, Jun 14, 2024 at 5:15 AM Paolo Abeni wrote:
>
> On Wed, 2024-06-12 at 09:59 +0200, Jesper Dangaard Brouer wrote:
> >
> > On 11/06/2024 22.11, Yan Zhai wrote:
> > > skb does not include enough information to find out receiving
> > > sockets/services and netns/containers on packet drops. In t
On Fri, Jun 14, 2024 at 10:48:22AM -0700, Nathan Chancellor wrote:
> Hi Jiri,
>
> On Tue, Jun 11, 2024 at 01:21:52PM +0200, Jiri Olsa wrote:
> > Adding uretprobe syscall instead of trap to speed up return probe.
> ...
> > diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c
> > index 2c8
My apologies (esp. to Masahiro Yamada)... this patch was supposed to resolve
the outstanding issue of needing to add gawk to the dependencies in the
documentation and that part of the patch still didn't make it in. I've added
it on my end for v5, and will absolutely ensure that it will be in the
On Fri, May 31, 2024 at 05:23:09PM GMT, Jeff Johnson wrote:
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/test_kmod.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson
Reviewed-by: Lucas De Marchi
On Thu, Jun 06, 2024 at 06:49:59AM GMT, Aditya Garg wrote:
Hi
I am Aditya Garg. I often require using out of tree drivers to support various
hardwares on Linux. Sometimes the provider doesn't write good drivers, and
often they have to be force unloaded. It's a common thing in proprietary
driv
On Fri, 14 Jun 2024 14:10:58 -0400
Kris Van Hees wrote:
> On Fri, Jun 14, 2024 at 01:46:51PM -0400, Steven Rostedt wrote:
> > On Fri, 14 Jun 2024 13:14:26 -0400
> > Kris Van Hees wrote:
> >
> > > Module objects compiled from C source can be identified by the presence
> > > of -DKBUILD_MODFILE
On Fri, Jun 14, 2024 at 01:46:51PM -0400, Steven Rostedt wrote:
> On Fri, 14 Jun 2024 13:14:26 -0400
> Kris Van Hees wrote:
>
> > Module objects compiled from C source can be identified by the presence
> > of -DKBUILD_MODFILE and -DKBUILD_MODNAME on their compile command lines.
> > However, modul
Hi Jiri,
On Tue, Jun 11, 2024 at 01:21:52PM +0200, Jiri Olsa wrote:
> Adding uretprobe syscall instead of trap to speed up return probe.
...
> diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c
> index 2c83ba776fc7..2816e65729ac 100644
> --- a/kernel/events/uprobes.c
> +++ b/kernel/eve
On Fri, 14 Jun 2024 13:14:26 -0400
Kris Van Hees wrote:
> Module objects compiled from C source can be identified by the presence
> of -DKBUILD_MODFILE and -DKBUILD_MODNAME on their compile command lines.
> However, module objects from assembler source do not have this defines.
>
> Add $(modfile
When CONFIG_BUILTIN_MODULE_RANGES is enabled, the modules.builtin.ranges
file should be installed in the module install location.
Signed-off-by: Kris Van Hees
Reviewed-by: Nick Alcock
---
Changes since v3:
- Only install modules.builtin.ranges if CONFIG_BUILTIN_MODULE_RANGES=y
---
scripts/Make
The offset range data for builtin modules is generated using:
- modules.builtin: associates object files with module names
- vmlinux.map: provides load order of sections and offset of first member
per section
- vmlinux.o.map: provides offset of object file content per section
- .*.cmd: buil
Module objects compiled from C source can be identified by the presence
of -DKBUILD_MODFILE and -DKBUILD_MODNAME on their compile command lines.
However, module objects from assembler source do not have this defines.
Add $(modfile_flags) to modkern_aflags (similar to modkern_cflahs), and
add $(mod
Especially for tracing applications, it is convenient to be able to
refer to a symbol using a pair and to be able
to translate an address into a pair. But
that does not work if the module is built into the kernel because the
object files that comprise the built-in module implementation are simpl
On Fri, 14 Jun 2024 12:00:02 +0900 Honggyu Kim wrote:
> There was an RFC IDEA "DAMOS-based Tiered-Memory Management" previously
> posted at [1].
>
> It says there is no implementation of the demote/promote DAMOS action
> are made. This patch series is about its implementation for physical
> add
On Fri, 14 Jun 2024 12:00:09 +0900 Honggyu Kim wrote:
> This patch adds damon description for "migrate_hot" and "migrate_cold"
> actions for both usage and design documents as long as a new
> "target_nid" knob to set the migration target node.
>
> Signed-off-by: Honggyu Kim
Reviewed-by: SeongJ
Hello:
This patch was applied to netdev/net-next.git (main)
by Paolo Abeni :
On Wed, 12 Jun 2024 12:01:56 +0530 you wrote:
> From: Chris Lew
>
> Ignore the ENODEV failures returned by kernel_sendmsg(). These errors
> indicate that either the local port has been closed or the remote has
> gone d
Yeah, I was thinking of adding Fixes:
But this code is new, it complements what is done.
1. check (!(ret && (hdr->gso_size > needed) &&
((remainder > needed) || (remainder == 0
complements comit 0f6925b3e8da0
2. The setting of the SKBFL_SHARED_FRAG flag can be associated wit
On Wed, 2024-06-12 at 09:59 +0200, Jesper Dangaard Brouer wrote:
>
> On 11/06/2024 22.11, Yan Zhai wrote:
> > skb does not include enough information to find out receiving
> > sockets/services and netns/containers on packet drops. In theory
> > skb->dev tells about netns, but it can get cleared/re
Fixing the __NR_uretprobe number in uprobe_syscall test,
because it changed due to merge conflict.
Signed-off-by: Jiri Olsa
---
tools/testing/selftests/bpf/prog_tests/uprobe_syscall.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/bpf/prog_tests/uprob
Add log information in kernel-space when loading module failures.
Try to load the unsigned module and the module with bad signature
when set 1 to /sys/module/module/parameters/sig_enforce.
Unsigned module case:
(linux) insmod unsigned.ko
[ 18.714661] Loading of unsigned module is rejected
insmod
From: Johannes Berg
Now that we have drop_reason_lookup(), we can just use it for
drop_monitor as well, rather than exporting the list itself.
Signed-off-by: Johannes Berg
---
v3:
- look up SKB_DROP_REASON_NOT_SPECIFIED if initial lookup
returns NULL, to preserve previous behaviour
---
inc
From: Johannes Berg
The __print_symbolic() could only ever print the core
drop reasons, since that's the way the infrastructure
works. Now that we have __print_sym() with all the
advantages mentioned in that commit, convert to that
and get all the drop reasons from all subsystems. As
we already h
From: Johannes Berg
The way __print_symbolic() works is limited and inefficient
in multiple ways:
- you can only use it with a static list of symbols, but
e.g. the SKB dropreasons are now a dynamic list
- it builds the list in memory _three_ times, so it takes
a lot of memory:
- The p
From: Johannes Berg
Use the new __print_sym() in the timer tracing, just to show
how to convert something. This adds ~80 bytes of .text for a
saving of ~1.5K of data in my builds.
Note the format changes from
print fmt: "success=%d dependency=%s", REC->success,
__print_symbolic(REC->dependency
v2 was:
- rebased on 6.9-rc1
- always search for __print_sym() and get rid of the DYNPRINT flag
and associated code; I think ideally we'll just remove the older
__print_symbolic() entirely
- use ':' as the separator instead of "//" since that makes searching
for it much easier and it's
31 matches
Mail list logo
