Hi there,
At first this sounds real stupid so I apologize.
I fail to connect to zap.co.il. other computers (MS) on my network go
there with out any problems but another Gentoo (k2.4 and not updated at
all) also fails to connect.
Didn't notice any other site with similar problems.
I tried everythi
Hi,
I have come across a weird behavior of my SCSI:
1) It tends every once if a while to go offline
2) It tends on reboots (might happen after step 1, but not sure if only after
step 1) to "switch" places, disks that used to be sda are now sdb etc.
Anyone seen this?
I m running:
2.6.18-4-686
B
Hi,
I would guess MTU issues, use (temporarily):
ifconfig eth0 mtu 1400
eth0 should be the network/ppp interface you use, if you are connected through
a router, and he is the PPP connector use ethN otherwise use pppN
On Tuesday 15 January 2008 10:19:37 you wrote:
> Hi there,
>
>
> At first this
Thanks
Noam Rathaus wrote:
> Hi,
>
> I would guess MTU issues, use (temporarily):
> ifconfig eth0 mtu 1400
>
Didn't help.
> eth0 should be the network/ppp interface you use, if you are connected
> through
> a router, and he is the PPP connector use ethN otherwise use pppN
>
> On Tuesday 15 J
I had that issue before with another router (EDIMAX) and then I
switched to Linksys.
I would suggest to set the MTU to 1452 and see if that works.
Thanks,
Hetz
On Jan 15, 2008 10:40 AM, David Harel <[EMAIL PROTECTED]> wrote:
>
>
>
> Thanks
>
> Noam Rathaus wrote:
>
> Hi,
>
> I would guess MTU
Thanks for your help.
Hetz Ben Hamo wrote:
> I had that issue before with another router (EDIMAX) and then I
> switched to Linksys.
>
If it was the router, wouldn't other machines on my network have the
same problem?
> I would suggest to set the MTU to 1452 and see if that works.
>
Tried b
On Tuesday 15 January 2008 David Harel wrote:
> Noam Rathaus wrote:
> > Hi,
> >
> > I would guess MTU issues, use (temporarily):
> > ifconfig eth0 mtu 1400
>
> Didn't help.
Try:
echo "409616384 131072 " > /proc/sys/net/ipv4/tcp_wmem
echo "409687380 174760 " > /proc/sys/net/ipv4/tcp_rm
Hi, list,
This letter is probably better suited to hackers-il, but I need help
from people that are better acquainted with a development process of gcc.
This morning, while browsing through pages of frustratingly irrelevant
cscope output, I got an idea. In every kosher *nix development
environm
On Tue, Jan 15, 2008 at 12:57:36PM +0200, Leonid Podolny wrote:
> Hi, list,
> This letter is probably better suited to hackers-il, but I need help
> from people that are better acquainted with a development process of gcc.
> This morning, while browsing through pages of frustratingly irrelevant
>
1. compilation could be broken and you still need to browse it
2. gcc don't know about cpp (preprocessor) defines
more tricks:
gcc -E gives you preprocessed file and you could check defines and ifdefs
objdump -S - gives you disassemble
On Jan 15, 2008 12:57 PM, Leonid Podolny <[EMAIL PROTECTED
On Tue, Jan 15, 2008 at 01:47:22PM +0200, Constantine Shulyupin wrote:
> 1. compilation could be broken and you still need to browse it
> 2. gcc don't know about cpp (preprocessor) defines
> more tricks:
> gcc -E gives you preprocessed file and you could check defines and ifdefs
> objdump -S -
Constantine Shulyupin wrote:
1. compilation could be broken and you still need to browse it
Yes, but you can always revert to cscope to solve compilation errors.
2. gcc don't know about cpp (preprocessor) defines
First, cpp could pass this info via intermediate files. Second, this
info info
-S too
On Jan 15, 2008 2:45 PM, Tzafrir Cohen <[EMAIL PROTECTED]> wrote:
> On Tue, Jan 15, 2008 at 01:47:22PM +0200, Constantine Shulyupin wrote:
> > 1. compilation could be broken and you still need to browse it
> > 2. gcc don't know about cpp (preprocessor) defines
> > more tricks:
> > gcc -E
On Jan 15, 2008 2:28 PM, Leonid Podolny <[EMAIL PROTECTED]> wrote:
> Constantine Shulyupin wrote:
> > 1. compilation could be broken and you still need to browse it
> Yes, but you can always revert to cscope to solve compilation errors.
If you could revert, why do need duplicated functionality in
David Harel wrote:
Same (didn't help). Seems to me as something basic in Linux kernel.
Use tcpdump with the "-w" option and also "-s 65535" to capture the
traffic and post it somewhere. Let's try to debug this.
Shachar
=
To unsu
Aviram Jenik wrote:
>>> ifconfig eth0 mtu 1400
>>>
>> Didn't help.
>>
>
> Try:
>
> echo "409616384 131072 " > /proc/sys/net/ipv4/tcp_wmem
> echo "409687380 174760 " > /proc/sys/net/ipv4/tcp_rmem
>
Same (didn't help). Seems to me as something basic in Linux kernel.
> (I
I had a similar problem. What I did was to set manually the DNS to use
and that solved the problem.
--
Ori idan
David Harel wrote:
> Hi there,
>
>
> At first this sounds real stupid so I apologize.
> I fail to connect to zap.co.il. other computers (MS) on my network go
> there with out any p
gcc as a compiler always work on a single file.
For a cross reference, you need something that knows all the files, this
is done by ld and it does create a cross reference, this is the map file.
However, during development, I still can not link (some files and
functions are broken) therefore I ne
Ori Idan wrote:
gcc as a compiler always work on a single file.
For a cross reference, you need something that knows all the files, this
is done by ld and it does create a cross reference, this is the map file.
However, during development, I still can not link (some files and
functions are brok
Ori Idan wrote:
Leonid Podolny wrote:
Ori Idan wrote:
gcc as a compiler always work on a single file.
For a cross reference, you need something that knows all the files, this
is done by ld and it does create a cross reference, this is the map
file.
However, during development, I still can no
Leonid Podolny wrote:
> Ori Idan wrote:
>> gcc as a compiler always work on a single file.
>>
>> For a cross reference, you need something that knows all the files, this
>> is done by ld and it does create a cross reference, this is the map
>> file.
>>
>> However, during development, I still can n
BTW, I have script, that makes tags for Linux kernel only for
configured architecture.
On Jan 15, 2008 5:05 PM, Leonid Podolny <[EMAIL PROTECTED]> wrote:
> were never included (such as wrong architectures and not included code
> during kernel development).
--
Constantine Shulyupin
Freelance Emb
Shachar Shemesh wrote:
> David Harel wrote:
>
>> Same (didn't help). Seems to me as something basic in Linux kernel.
> Use tcpdump with the "-w" option and also "-s 65535" to capture the
> traffic and post it somewhere.
Tried to use pastebin.com but the file is binary. Any suggestion?
> Let's tr
This script builds "name file:line" table from object/exe file. It is
easy to make tags from this.
objsrc()
{
nm --defined $1 | cut -f 1 -d ' ' | addr2line -e bin/eb_client
> /tmp/lines
nm --defined $1 | cut -f 3 -d ' ' > /tmp/name
paste /tmp/name /tmp/lines
}
On Jan 15, 2
Hi,
This sounds a bit like an hardware problem. Have you investigated in this
direction?
- Noam
On Jan 15, 2008 10:29 AM, Noam Rathaus <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I have come across a weird behavior of my SCSI:
> 1) It tends every once if a while to go offline
> 2) It tends on reboots (m
Hi,
Hrm, before I go and start my service agreement that usually results in a
eyebrow raising on "THIS IS LINUX!" (on the same scale of THIS IS SPARTA :D)
I want to confirm its not my Kernel or anything else it might be.
Hardware failures such as this are hard to confirm, verify and display to
Hi,
I have many customers with similar kinds of SCSI controllers running mostly
RHEL4 (though many are running RHEL3 & 5, and a very small part of them
non-enterprise Linuxes) and never experienced such a problem.
I do not believe that this is a driver issue, and this only leads me to
suspect that
On Tuesday 15 January 2008, David Harel wrote:
> Shachar Shemesh wrote:
> > David Harel wrote:
> >> Same (didn't help). Seems to me as something basic in Linux kernel.
> >
> > Use tcpdump with the "-w" option and also "-s 65535" to capture the
> > traffic and post it somewhere.
>
> Tried to use pas
1. the order of assigning a SCSI Device file to a SCSI device, is the
order of discovery. for example: if you have two internal SCSI
controllers, the order of loading their drivers will change the device
file assignment.
sometimes, the existene of a USB disk-on-key in the system could change
On Jan 13, 2008 2:58 PM, Ira Abramov <[EMAIL PROTECTED]> wrote:
> I'm helping a client here to start a project from almost scratch. it
> involves java servelets for Tomcat, building with MAVEN, a few external
> GPL tarballs that are downloaded from the web, unzipped and compiled (or
> maybe we'll c
30 matches
Mail list logo
