On Sunday 13 February 2011 22:58:07 Yedidyah Bar-David wrote:
> On Sun, Feb 13, 2011 at 10:14:27PM +0200, Geoff Shang wrote:
> > On Sun, 13 Feb 2011, Michael Tewner wrote:
> >> Shimi's solution will work - use a cross-over cable, though, in
> >> order to connect the switches together.
> >
> > hmm.
On Sunday 13 February 2011 22:51:57 Nadav Har'El wrote:
> On Sun, Feb 13, 2011, Geoff Shang wrote about "Re: Networking: How to
add another router":
> > It would. However, I only have a router and it seems like a bit of a
> > waste to buy a 4/8/16 port switc
On Sun, Feb 13, 2011 at 10:14:27PM +0200, Geoff Shang wrote:
> On Sun, 13 Feb 2011, Michael Tewner wrote:
>
>> Shimi's solution will work - use a cross-over cable, though, in order to
>> connect the switches together.
>
> hmm. Is there an easy way to tell a crossover cable from a straight one?
>
On Sun, Feb 13, 2011, Geoff Shang wrote about "Re: Networking: How to add
another router":
> It would. However, I only have a router and it seems like a bit of a
> waste to buy a 4/8/16 port switch to accommodate only one more device.
Then I'm even more confused what th
On Sun, Feb 13, 2011, Michael Tewner wrote about "Re: Networking: How to add
another router":
> Shimi's solution will work - use a cross-over cable, though, in order to
> connect the switches together.
This advice is somewhat anachronistic, as modern equipment should have
Au
On Sun, Feb 13, 2011, Geoff Shang wrote about "Networking: How to add another
router":
> I find myself with the need to connect 5 ethernet devices to 4 available
> ports.
>...
> to help solve my problem. The closest I've seen is a way to send two
> 10/100 mb
On Sun, 13 Feb 2011, Michael Tewner wrote:
On Sun, Feb 13, 2011 at 9:28 PM, Michael Tewner wrote:
Hypothetically, you should be able to connect multiple computers to the
same network cable - that is, wire 2 connectors, in series, at one end. This
would give you a "hub" on that segment, and th
On Sun, 13 Feb 2011, Michael Tewner wrote:
Shimi's solution will work - use a cross-over cable, though, in order to
connect the switches together.
hmm. Is there an easy way to tell a crossover cable from a straight one?
I've never really had to worry about it before except in one specific
i
On Sun, 13 Feb 2011, Gabor Szabo wrote:
I probably misunderstand the whole problem, wouldn't a HUB or a switch
solve that?
It would. However, I only have a router and it seems like a bit of a
waste to buy a 4/8/16 port switch to accommodate only one more device.
Geoff.
__
Hi,
Thanks to everyone for your answers.
On Sun, 13 Feb 2011, shimi wrote:
Take the un-used router; Go into its configuration; Disable the Internal
DHCP server; Verify that the router does not have an IP address which
already belongs to any other device in your LAN (if it does, change it to
so
On Sun, Feb 13, 2011 at 9:28 PM, Michael Tewner wrote:
> Hi -
> Shimi's solution will work - use a cross-over cable, though, in order to
> connect the switches together.
>
He should try getting a cross cable only if a regular cable did not do the
trick (or if he has a spare cross. just don't run
On Sun, Feb 13, 2011 at 9:28 PM, Michael Tewner wrote:
> Hi -
> Shimi's solution will work - use a cross-over cable, though, in order to
> connect the switches together.
>
> Hypothetically, you should be able to connect multiple computers to the
> same network cable - that is, wire 2 connectors,
Hi -
Shimi's solution will work - use a cross-over cable, though, in order to
connect the switches together.
Hypothetically, you should be able to connect multiple computers to the same
network cable - that is, wire 2 connectors, in series, at one end. This
would give you a "hub" on that segment,
On Sun, Feb 13, 2011 at 6:47 PM, Geoff Shang wrote:
> Hi,
>
> I find myself with the need to connect 5 ethernet devices to 4 available
> ports.
>
> I'm running an ADSL modem/router with a 192.168.2.x network (for historical
> reasons) and have allocated static addresses to all of the static devic
On Sun, Feb 13, 2011 at 6:47 PM, Geoff Shang wrote:
> Hi,
>
> I find myself with the need to connect 5 ethernet devices to 4 available
> ports.
I probably misunderstand the whole problem, wouldn't a HUB or a switch
solve that?
Gabor
http://szabgab.com/
__
Hi,
I find myself with the need to connect 5 ethernet devices to 4 available
ports.
I'm running an ADSL modem/router with a 192.168.2.x network (for
historical reasons) and have allocated static addresses to all of the
static devices, and a pool of DHCP addresses for devices which ask for it
16 matches
Mail list logo
