Hi Holger,
I will send you the contact person address and phone no. later in the day.
After some study I found out that the TS demuxing is done by the sigma
only.We just need to pass the streamtype as a parameter to the sigma by
means of the APIs(t for TS D FOR DVD AND S FOR PROGRAM STREAM).
I w
Hi
Apparently on Eutelsat W3 at 7.0E on transponder C3 11262MHz
horizontal they are broadcasting in MPEG-4 rather than MPEG-2.
Has anyone been able to receive a stream (with the linux DVB
driver) and done something useful with it ?
In principle, a budget card should be able to take the transpond
Hi,
has anyone located the IR-IN pin on the Siemens DVB-C cards? On DVB-S cards(old rev.)
its on block J2(pin 9) but I would need the pin location for the Siemens DVB-C.
Thanx in advance!
---
***Protect your
Hi,
On Tuesday 07 January 2003 08:53, you wrote:
> Hi,
> I'm using DVB driver 0.9.4 whith a DVB-S board version 2.1.
> When I insert the PMT in the MPEG2 flow I use like a video source, I get a
> black screen during about 1 second after each "start display". Is DVB
> driver or firmware use PMT ?
Hi,
On Tuesday 07 January 2003 11:03, Peter Maersk-Moller wrote:
> Apparently on Eutelsat W3 at 7.0E on transponder C3 11262MHz
> horizontal they are broadcasting in MPEG-4 rather than MPEG-2.
>
> Has anyone been able to receive a stream (with the linux DVB
> driver) and done something useful with
Hi, I've done some investigation into the problems I'm having. I have
two WinTV Nova-T cards,with Grundig 29504-401 tuner modules. I'm using
the latest "dvb-kernel" driver from CVS under linux 2.4.20.
Whenever I tune a card for the first time, I always get the following
behaviour:
[root@burble
Hi, here's a patch (for dvb-kernel) that allows this tuner module to be
reloaded. There's no good way to detect the thing if it has been powered
down, so the code is larger than I had hoped to be as safe as possible.
diff -Naur dvb-kernel.ORIGINAL/linux/drivers/media/dvb/frontends/grundig_29504
; DVB/driver directory. The video device /dev/dvb/adapter0/video is not
> intended as v4l device, you use it to control the MPEG video decoder.
I was using 20021229, which I thought was pretty recent, but I have now
downloaded 20030107 and I see you have made a lot of changes. I've run
make
On Tuesday 07 January 2003 1:03 pm, you wrote:
> Nova-T, which I understand is equivalent to the basic Technotrend card.
> I think the full-featured cards are not even available in the UK - at
> least not advertised.
I called Hauppauge in the UK a while back, and they can get you a
full-featured
Hi there,
in my box (K6-2 300 on Apollo VP3) i always had a few problems with the
driver and my Hauppage card. Now i've been able to track it down a bit
and send some traces.
I am using the current version of dvb-kernel and a 2.5.54 kernel.
Everything is installed as described in the README. And
Hi everybody,
the final redesign for Linear DC/DC converters is in CVS, module
dvb-hw/. You can view the files online:
http://linuxtv.org/cgi-bin/cvsweb.cgi/
We decided to use a 4layer board due to the LED wires and the IR
receiver datalines crossing the highspeed TS signals. Achieving the
re
On Tue, Dec 24, 2002 at 12:36:56AM +0100, Holger Waechtler wrote:
> @@ -1040,11 +1059,17 @@ unsigned int
> DmxDevDVRPoll(dmxdev_t *dmxdev, struct file *file, poll_table * wait)
> {
> if ((file->f_flags&O_ACCMODE)==O_RDONLY) {
> + if (dmxdev->dvr_buffer.error)
> +
Hi, Just had a closer look at the code.. really obvious bug :)
Proper patch attached.
diff -Naur dvb-kernel.ORIGINAL/linux/drivers/media/dvb/dvb-core/dvb_frontend.c dvb-kernel/linux/drivers/media/dvb/dvb-core/dvb_frontend.c
--- dvb-kernel.ORIGINAL/linux/drivers/media/dvb/dvb-core/dvb_frontend
I have the CVS version of dvbstream
when i run
dvbstream -f 754167 -qam 16 -cr 3_4 -ps 600 601 -o | mplayer - -nocache
i get
dvbstream v0.4pre3 - (C) Dave Chapman 2001
Released under the GPL.
Latest version available from http://www.linuxstb.org/
Using GNU internationalization
Original domain
> Please review, watch out for bugs and comment everything you might find
> strange.
Will the PCB be compatible with sat and/or cable tuners ? No DVB-T planned
in France until 2005 :-(
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
Are you using the Nova-T from dabs or a full-feature card ?
After days of searching round on the net I have failed to find any
complete explaination on how to use the nova-t. Most stuff says that it
works as follows unless your using the nova-t but does not explain what
you do if you do have a
Hi,
If you wish I can supply DVB cards via www.jtml.co.uk
Or www.jtml.com just request one and I will see what I
can do probably better price then dabs etc.
Regards
Matt Zagni
www.jtml.com www.jtml.co.uk computers parts laptops software etc in the
UK
> -Original Message-
> From: [EMAIL
The patch version 07 is here, which has some brute approach
for fixing the reported problems.
Emard
Only in DVB/apps/av7110_loadkeys: evtest
diff -pur /home/loader/src/DVB/apps/szap/szap.c DVB/apps/szap/szap.c
--- /home/loader/src/DVB/apps/szap/szap.c Sun Nov 17 00:36:09 2002
+++ DVB/apps/s
This mail was originally sent to a friend of mine in Belfast, hence the
reference to Divis... but it might provide useful info to others.
Thought I'd share some useful stuffs so you don't spend hours going round in
circles like I did...
http://www.itc.org.uk/uk_television_sector/reception_advice
Gavin,
Thanks for the pointers.
Gavin Hamill wrote:
For BBC / Freeview muxes:
dvbstream -f 754167 -qam 16 -cr 3_4 -ps 600 601 -o | mplayer - -nocache
For ITV and C5 muxes
dvbstream -f 834167 -qam 64 -cr 2_3 -ps 512 650 -o | mplayer - -nocache
I tried this, but using 505833 and 481833, whic
Hi Bruno,
You'll want to add '-qam 16 -cr 3_4' to both the dvbtune and dvbstream
lines.
Also 600 601 doesn't sound right, try 601 602 on 505833 (with -qam 16
-cr 3_4)
Mike
On Tue, 2003-01-07 at 23:23, Bruno Prior wrote:
> Gavin,
>
> Thanks for the pointers.
>
> Gavin Hamill wrote:
> >
> > Fo
hi,
trying to get a Fujitsu-Siemens card to work with vdr, I managed to compile
linux-12-08-2002 without errors (as far as I can tell). make insmod does show
this in /var/log/messages:
Jan 6 06:12:38 linux kernel: Linux video capture interface: v1.00
Jan 6 06:12:41 linux kernel: DVB: register
I would like to know how to setup my Hauppage Nexus DVB-s card, for
open-sky client.
Hello ?
Can anyone help me on this one ? I don't know how to put the card in the
ifconfig.
Regards,
--
Alexandre CONRAD
Research & Development
tel : +33 1 30 80 55 00
fax : +33 1 30 56 50 20
TLV
6, rue de l
Do you mean the service on Eutelsat 7°E?
See my other mail from this morning on this list.
On Tuesday 07 January 2003 16:12, Alexandre CONRAD wrote:
> > I would like to know how to setup my Hauppage Nexus DVB-s card, for
> > open-sky client.
>
> Hello ?
>
> Can anyone help me on this one ? I don't
24 matches
Mail list logo
