Hi,
> //You cannot use /dev/video0 for a budget
>
> do you mean that Twinhav VP1020 cannot used
> /dev/video0, infact VDR and xawtv tries to used this
> device and gives an error!!!
>
> // xawtv will not work as it is... You will have to
> use
>
Again i say the same you cannot use a budge
Hi
Thanks
//You cannot use /dev/video0 for a budget
do you mean that Twinhav VP1020 cannot used
/dev/video0, infact VDR and xawtv tries to used this
device and gives an error!!!
// xawtv will not work as it is... You will have to
use
> mplayer and pipe the
> output to mplayer...
thanks for t
> in fact, i try everythings just to get this card
> working, after i insmod the "dst" and fail to get the
> VDR or xawtv to work with, i tried to insmod the
> "CX24110" to see if it works, but nothings happen, the
> i tried remove the "dst" and insmod it again with
> "DST_TYPE_FLAGS=0",
> "DST_TY
As far as I know yes.
You may also try one of VDR's plugins such as streamdev (to stream the
TS over your lan),
but it didn't work for me because it seems it requires VDR's gui to be
configured and enabled .
ABBAS AL-MUTAWA wrote:
hi
Thanks
sorry, i did not understand you. do you mean that
VDR works only with FF cards or budget cards (like yours) + additional
hardware decoder (like Creative DXR3).
ABBAS AL-MUTAWA wrote:
Hi
first Thanks for replying me fastly.
in fact, i try everythings just to get this card
working, after i insmod the "dst" and fail to get the
VDR or xawtv to wor
Hi
first Thanks for replying me fastly.
in fact, i try everythings just to get this card
working, after i insmod the "dst" and fail to get the
VDR or xawtv to work with, i tried to insmod the
"CX24110" to see if it works, but nothings happen, the
i tried remove the "dst" and insmod it again with
"
Hi,
The card is a Pinnacle card or is the CX24110 module loaded as it is by some
script ?
Maybe the modules are confused looking for a Pinnacle PC TV@ SAT card(CX24110
chipset) ? The removal of the module and loading the modules proper with the
DST_TYPE_FLAGS would help ?
Rega
> well, I insmod the driver as wriiten in the DVB-kernel
> without any errors.
I'm afraid that isn't the case, as you can see below.
> bttv: driver version 0.9.12 loaded
> bttv: using 8 buffers with 2080k (520 pages) each for
> capture
> bttv: Bt8xx card found (0).
> PCI: Found IRQ 11 for d
